aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-03-11net/mlx5: Avoid panic when setting vport mac, getting vport configTonghao Zhang1-2/+2
If we try to set VFs mac address on a VF (not PF) net device, the kernel will be crash. The commands are show as below: $ echo 2 > /sys/class/net/$MLX_PF0/device/sriov_numvfs $ ip link set $MLX_VF0 vf 0 mac 00:11:22:33:44:00 [exception RIP: mlx5_eswitch_set_vport_mac+41] [ffffb8b7079e3688] do_setlink at ffffffff8f67f85b [ffffb8b7079e37a8] __rtnl_newlink at ffffffff8f683778 [ffffb8b7079e3b68] rtnl_newlink at ffffffff8f683a63 [ffffb8b7079e3b90] rtnetlink_rcv_msg at ffffffff8f67d812 [ffffb8b7079e3c10] netlink_rcv_skb at ffffffff8f6b88ab [ffffb8b7079e3c60] netlink_unicast at ffffffff8f6b808f [ffffb8b7079e3ca0] netlink_sendmsg at ffffffff8f6b8412 [ffffb8b7079e3d18] sock_sendmsg at ffffffff8f6452f6 [ffffb8b7079e3d30] ___sys_sendmsg at ffffffff8f645860 [ffffb8b7079e3eb0] __sys_sendmsg at ffffffff8f647a38 [ffffb8b7079e3f38] do_syscall_64 at ffffffff8f00401b [ffffb8b7079e3f50] entry_SYSCALL_64_after_hwframe at ffffffff8f80008c and [exception RIP: mlx5_eswitch_get_vport_config+12] [ffffa70607e57678] mlx5e_get_vf_config at ffffffffc03c7f8f [mlx5_core] [ffffa70607e57688] do_setlink at ffffffffbc67fa59 [ffffa70607e577a8] __rtnl_newlink at ffffffffbc683778 [ffffa70607e57b68] rtnl_newlink at ffffffffbc683a63 [ffffa70607e57b90] rtnetlink_rcv_msg at ffffffffbc67d812 [ffffa70607e57c10] netlink_rcv_skb at ffffffffbc6b88ab [ffffa70607e57c60] netlink_unicast at ffffffffbc6b808f [ffffa70607e57ca0] netlink_sendmsg at ffffffffbc6b8412 [ffffa70607e57d18] sock_sendmsg at ffffffffbc6452f6 [ffffa70607e57d30] ___sys_sendmsg at ffffffffbc645860 [ffffa70607e57eb0] __sys_sendmsg at ffffffffbc647a38 [ffffa70607e57f38] do_syscall_64 at ffffffffbc00401b [ffffa70607e57f50] entry_SYSCALL_64_after_hwframe at ffffffffbc80008c Fixes: a8d70a054a718 ("net/mlx5: E-Switch, Disallow vlan/spoofcheck setup if not being esw manager") Cc: Eli Cohen <eli@mellanox.com> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-11net/mlx5e: Fix access to non-existing receive queueTariq Toukan1-0/+3
In case number of channels is changed while interface is down, RSS indirection table is mistakenly not modified accordingly, causing access to out-of-range non-existing object. Fix by updating the RSS indireciton table also in the early return flow of interface down. Fixes: fb35c534b788 ("net/mlx5e: Fix NULL pointer derefernce in set channels error flow") Fixes: bbeb53b8b2c9 ("net/mlx5e: Move RSS params to a dedicated struct") Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Tested-by: Maria Pasechnik <mariap@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-11net/mlx5e: IPoIB, Fix RX checksum statistics updateFeras Daoud1-3/+8
Update the RX checksum only if the feature is enabled. Fixes: 9d6bd752c63c ("net/mlx5e: IPoIB, RX handler") Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-11net/mlx5: Remove redundant lag function to get pf numRoi Dayan2-23/+0
The function is not being used. Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-11net/mlx5e: Properly get the PF number phys port name ndoRoi Dayan1-6/+7
Currently, we fail to retrieve the PF number in some cases (e.g single ported cards, lag capability), this further results in a call trace issued by the rtnetlink code, since the error value is not -EOPNOTSUPP. Change the implementation to be independent from the lag code and function properly on both two ports and single ported cards. Call Trace: [ 194.525057] mlx5_core 0000:82:00.0: mlx5_lag_get_pf_num:605:(pid 837): no lag device, can't get pf num [ 194.525804] WARNING: CPU: 7 PID: 837 at net/core/rtnetlink.c:3457 rtmsg_ifinfo_build_skb+0x131/0x160 [ 194.529952] CPU: 7 PID: 837 Comm: kworker/7:3 Tainted: G W O 5.0.0-rc7+ #3 [ 194.531307] Workqueue: events linkwatch_event [ 194.531697] RIP: 0010:rtmsg_ifinfo_build_skb+0x131/0x160 [ 194.545007] Call Trace: [ 194.545406] rtmsg_ifinfo_event.part.29+0x1b/0xb0 [ 194.545810] rtmsg_ifinfo+0x51/0x80 [ 194.546209] netdev_state_change+0xc7/0x110 [ 194.546608] ? dev_valid_name+0x1b0/0x1b0 [ 194.547010] ? __local_bh_enable_ip+0xef/0x1d0 [ 194.547411] ? lockdep_hardirqs_on+0x3ea/0x560 [ 194.547811] ? linkwatch_do_dev+0x9b/0x100 [ 194.548207] linkwatch_do_dev+0x9b/0x100 [ 194.548605] __linkwatch_run_queue+0x244/0x430 [ 194.549014] ? linkwatch_schedule_work+0x100/0x100 [ 194.549412] ? lock_acquire+0x10f/0x2d0 [ 194.549816] linkwatch_event+0x3f/0x50 [ 194.550212] process_one_work+0x7d3/0x1460 Fixes: c12ecc230564 ("net/mlx5e: Move to use common phys port names for vport representors") Signed-off-by: Roi Dayan <roid@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-11net/mlx5: Consolidate update FTE for all removal changesEli Britstein1-6/+25
With commit a18e879d4e45 ("net/mlx5e: Annul encap action ordering requirement") and a use-case of e-switch remote mirroring, the incremental/stepped FTE removal process done by the fs core got us to illegal transient states and FW errors: SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x9c2e40) To avoid that and improve FTE removal performance, aggregate the FTE's updates that should be applied. Remove the FTE if it is empty, or apply one FW update command with the aggregated updates. Fixes: a18e879d4e45 ("net/mlx5e: Annul encap action ordering requirement") Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-11net/mlx5: Add a locked flag to node removal functionsEli Britstein1-42/+44
Add a locked flag to the node removal functions to signal if the parent is already locked from the caller function or not as a pre-step towards outside lock. Currently always use false with no functional change. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-11net/mlx5: Add modify FTE helper functionEli Britstein2-21/+30
Add modify FTE helper function and use it when deleting a rule, as a pre-step towards consolidated FTE modification, with no functional change. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-11net/mlx5: Fix multiple updates of steering rules in parallelEli Britstein1-0/+6
There might be a condition where the fte found is not active yet. In this case we should not use it, but continue to search for another, or allocate a new one. Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel") Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-09net: hns3: fix to stop multiple HNS reset due to the AER changesShiju Jose3-3/+11
The commit bfcb79fca19d ("PCI/ERR: Run error recovery callbacks for all affected devices") affected the non-fatal error recovery logic for the HNS and RDMA devices. This is because each HNS PF under PCIe bus receive callbacks from the AER driver when an error is reported for one of the PF. This causes unwanted PF resets because the HNS decides which PF to reset based on the reset type set. The HNS error handling code sets the reset type based on the hw error type detected. This patch provides fix for the above issue for the recovery of the hw errors in the HNS and RDMA devices. This patch needs backporting to the kernel v5.0+ Fixes: 332fbf576579 ("net: hns3: add handling of hw ras errors using new set of commands") Reported-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-08net: stmmac: Avoid one more sometimes uninitialized Clang warningNathan Chancellor1-1/+1
When building with -Wsometimes-uninitialized, Clang warns: drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c:111:2: error: variable 'ns' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c:111:2: error: variable 'ns' is used uninitialized whenever '&&' condition is false [-Werror,-Wsometimes-uninitialized] Clang is concerned with the use of stmmac_do_void_callback (which stmmac_get_systime wraps), as it may fail to initialize these values if the if condition was ever false (meaning the callback doesn't exist). It's not wrong because the callback is what initializes ns. While it's unlikely that the callback is going to disappear at some point and make that condition false, we can easily avoid this warning by zero initializing the variable. Link: https://github.com/ClangBuiltLinux/linux/issues/384 Fixes: df103170854e ("net: stmmac: Avoid sometimes uninitialized Clang warnings") Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-08net: ethernet: sun: Zero initialize class in default case in niu_add_ethtool_tcam_entryNathan Chancellor1-0/+1
When building with -Wsometimes-uninitialized, Clang warns: drivers/net/ethernet/sun/niu.c:7466:5: warning: variable 'class' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] The default case can never happen because i can only be 0 to 3 (NIU_L3_PROG_CLS is defined as 4). To make this clear to Clang, just zero initialize class in the default case (use the macro CLASS_CODE_UNRECOG to make it clear this shouldn't happen). Link: https://github.com/ClangBuiltLinux/linux/issues/403 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-088139too : Add support for U.S. Robotics USR997901A 10/100 Cardbus NICMatthew Whitehead1-0/+1
Add PCI vendor and device identifier for U.S. Robotics USR997901A 10/100 Cardbus NIC. Tested on real hardware. Signed-off-by: Matthew Whitehead <tedheadster@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-08net: hns3: add dma_rmb() for rx descriptionJian Shen1-0/+2
HW can not guarantee complete write desc->rx.size, even though HNS3_RXD_VLD_B has been set. Driver needs to add dma_rmb() instruction to make sure desc->rx.size is always valid. Fixes: e55970950556 ("net: hns3: Add handling of GRO Pkts not fully RX'ed in NAPI poll") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-08net: ethernet: stmmac: add management of clk_csr propertyChristophe Roullier1-0/+3
In Documentation stmmac.txt there is possibility to fixed CSR Clock range selection with property clk_csr. This patch add the management of this property For example to use it, add in your ethernet node DT: clk_csr = <3>; Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-08net: ethernet: stmmac: update to support all PHY config for stm32mp157c.Christophe Roullier1-21/+86
Update glue codes to support all PHY config on stm32mp157c PHY_MODE (MII,GMII, RMII, RGMII) and in normal, PHY wo crystal (25Mhz), PHY wo crystal (50Mhz), No 125Mhz from PHY config. Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-08net: ethernet: stmmac: manage Ethernet WoL for stm32mp157c.Christophe Roullier1-1/+29
Add glue codes to support magic packet on stm32mp157c Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-07nfp: fix simple vNIC mailbox lengthDirk van der Merwe1-1/+1
The simple vNIC mailbox length should be 12 decimal and not 0x12. Using a decimal also makes it clear this is a length value and not another field within the simple mailbox defines. Found by code inspection, there are no known firmware configurations where this would cause issues. Fixes: 527d7d1b9949 ("nfp: read mailbox address from TLV caps") Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-07net: stmmac: Avoid sometimes uninitialized Clang warningsNathan Chancellor1-3/+3
When building with -Wsometimes-uninitialized, Clang warns: drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:495:3: warning: variable 'ns' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:495:3: warning: variable 'ns' is used uninitialized whenever '&&' condition is false [-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:532:3: warning: variable 'ns' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:532:3: warning: variable 'ns' is used uninitialized whenever '&&' condition is false [-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:741:3: warning: variable 'sec_inc' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:741:3: warning: variable 'sec_inc' is used uninitialized whenever '&&' condition is false [-Wsometimes-uninitialized] Clang is concerned with the use of stmmac_do_void_callback (which stmmac_get_timestamp and stmmac_config_sub_second_increment wrap), as it may fail to initialize these values if the if condition was ever false (meaning the callbacks don't exist). It's not wrong because the callbacks (get_timestamp and config_sub_second_increment respectively) are the ones that initialize the variables. While it's unlikely that the callbacks are ever going to disappear and make that condition false, we can easily avoid this warning by zero initialize the variables. Link: https://github.com/ClangBuiltLinux/linux/issues/384 Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-07qede: Fix internal loopback failure with jumbo mtu configurationSudarsana Reddy Kalluru1-2/+5
Driver uses port-mtu as packet-size for the loopback traffic. This patch limits the max packet size to 1.5K to avoid data being split over multiple buffer descriptors (BDs) in cases where MTU > PAGE_SIZE. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-07enic: fix build warning without CONFIG_CPUMASK_OFFSTACKArnd Bergmann1-3/+3
The enic driver relies on the CONFIG_CPUMASK_OFFSTACK feature to dynamically allocate a struct member, but this is normally intended for local variables. Building with clang, I get a warning for a few locations that check the address of the cpumask_var_t: drivers/net/ethernet/cisco/enic/enic_main.c:122:22: error: address of array 'enic->msix[i].affinity_mask' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion] As far as I can tell, the code is still correct, as the truth value of the pointer is what we need in this configuration. To get rid of the warning, use cpumask_available() instead of checking the pointer directly. Fixes: 322cf7e3a4e8 ("enic: assign affinity hint to interrupts") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-07ravb: Decrease TxFIFO depth of Q3 and Q2 to oneMasaru Nagai1-1/+1
Hardware has the CBS (Credit Based Shaper) which affects only Q3 and Q2. When updating the CBS settings, even if the driver does so after waiting for Tx DMA finished, there is a possibility that frame data still remains in TxFIFO. To avoid this, decrease TxFIFO depth of Q3 and Q2 to one. This patch has been exercised this using netperf TCP_MAERTS, TCP_STREAM and UDP_STREAM tests run on an Ebisu board. No performance change was detected, outside of noise in the tests, both in terms of throughput and CPU utilisation. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com> Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [simon: updated changelog] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-07davinci_emac: always build in CONFIG_OF codeArnd Bergmann1-3/+1
clang warns about what seems to be an unintended use of an obscure C language feature where a forward declaration of an array remains usable when the final definition is never seen: drivers/net/ethernet/ti/davinci_emac.c:1694:34: error: tentative array definition assumed to have one element [-Werror] static const struct of_device_id davinci_emac_of_match[]; There is no harm in always enabling the device tree matching code here, and it makes the code behave in a more conventional way aside from avoiding the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-06net: hns3: Fix a logical vs bitwise typoDan Carpenter1-2/+2
There were a couple logical ORs accidentally mixed in with the bitwise ORs. Fixes: e8149933b1fa ("net: hns3: remove hnae3_get_bit in data path") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-05Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-4/+5
Pull crypto update from Herbert Xu: "API: - Add helper for simple skcipher modes. - Add helper to register multiple templates. - Set CRYPTO_TFM_NEED_KEY when setkey fails. - Require neither or both of export/import in shash. - AEAD decryption test vectors are now generated from encryption ones. - New option CONFIG_CRYPTO_MANAGER_EXTRA_TESTS that includes random fuzzing. Algorithms: - Conversions to skcipher and helper for many templates. - Add more test vectors for nhpoly1305 and adiantum. Drivers: - Add crypto4xx prng support. - Add xcbc/cmac/ecb support in caam. - Add AES support for Exynos5433 in s5p. - Remove sha384/sha512 from artpec7 as hardware cannot do partial hash" [ There is a merge of the Freescale SoC tree in order to pull in changes required by patches to the caam/qi2 driver. ] * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (174 commits) crypto: s5p - add AES support for Exynos5433 dt-bindings: crypto: document Exynos5433 SlimSSS crypto: crypto4xx - add missing of_node_put after of_device_is_available crypto: cavium/zip - fix collision with generic cra_driver_name crypto: af_alg - use struct_size() in sock_kfree_s() crypto: caam - remove redundant likely/unlikely annotation crypto: s5p - update iv after AES-CBC op end crypto: x86/poly1305 - Clear key material from stack in SSE2 variant crypto: caam - generate hash keys in-place crypto: caam - fix DMA mapping xcbc key twice crypto: caam - fix hash context DMA unmap size hwrng: bcm2835 - fix probe as platform device crypto: s5p-sss - Use AES_BLOCK_SIZE define instead of number crypto: stm32 - drop pointless static qualifier in stm32_hash_remove() crypto: chelsio - Fixed Traffic Stall crypto: marvell - Remove set but not used variable 'ivsize' crypto: ccp - Update driver messages to remove some confusion crypto: adiantum - add 1536 and 4096-byte test vectors crypto: nhpoly1305 - add a test vector with len % 16 != 0 crypto: arm/aes-ce - update IV after partial final CTR block ...
2019-03-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+11
2019-03-04sky2: Disable MSI on Dell Inspiron 1545 and Gateway P-79Kai-Heng Feng1-1/+23
Some sky2 chips fire IRQ after S3, before the driver is fully resumed: [ 686.804877] do_IRQ: 1.37 No irq handler for vector This is likely a platform bug that device isn't fully quiesced during S3. Use MSI-X, maskable MSI or INTx can prevent this issue from happening. Since MSI-X and maskable MSI are not supported by this device, fallback to use INTx on affected platforms. BugLink: https://bugs.launchpad.net/bugs/1807259 BugLink: https://bugs.launchpad.net/bugs/1809843 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04net/mlx5e: Update tx reporter status in case channels were successfully openedEran Ben Elisha1-0/+4
Once channels were successfully opened, update tx reporter health state to healthy. This is needed for the following scenario: - SQ has an un-recovered error reported to the devlink health, resulting tx reporter state to be error. - Current channels (including this SQ) are closed - New channels are opened After that flow, the original error was "solved", and tx reporter state should be healthy. However, as it was resolved as a side effect, and not via tx reporter recover method, driver needs to inform devlink health about it. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04cxgb4/chtls: Prefix adapter flags with CXGB4Arjun Vynipadath11-104/+105
Some of these macros were conflicting with global namespace, hence prefixing them with CXGB4. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04mellanox: Switch to bitmap_zalloc()Andy Shevchenko5-22/+16
Switch to bitmap_zalloc() to show clearly what we are allocating. Besides that it returns pointer of bitmap type instead of opaque void *. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03mlxsw: i2c: Extend initialization by querying resources dataVadim Pasternak2-6/+17
Extend initialization flow by query requests for chip resources data in order to obtain chip's specific capabilities, like the number of ports. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03mlxsw: i2c: Extend input parameters list of command APIVadim Pasternak1-19/+101
Extend input parameters list of command API in mlxsw_i2c_cmd() in order to support initialization commands. Up until now, only access commands were supported by I2C driver. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03mlxsw: i2c: Modify input parameter name in initialization APIVadim Pasternak1-1/+1
Change input parameter name "resource" to "res" in mlxsw_i2c_init() in order to align it with mlxsw_pci_init(). Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03mlxsw: i2c: Fix comment misspellingVadim Pasternak1-1/+1
Fix comment for mlxsw_i2c_write_cmd(). Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03mlxsw: core: Move resource query API to common locationVadim Pasternak3-37/+40
Move mlxsw_pci_resources_query() to a common location to allow reuse by the different drivers and over all the supported physical buses. Rename it to mlxsw_core_resources_query(). Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03mlxsw: minimal: Add ethtool supportVadim Pasternak1-2/+322
The minimal driver is chip independent and uses I2C bus for chip access. Its purpose is to support chassis management on systems equipped with Mellanox switch ASICs. For example from BMC (Board Management Controller) device. Expose a dummy netdev for each front panel port and implement basic ethtool operations to obtain QSFP/SFP module info through ethtool. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03mlxsw: minimal: Make structures and variables names shorterVadim Pasternak1-18/+18
Replace "mlxsw_minimal" by "mlxsw_m" in order to improve code readability. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03mlxsw: core: Move ethtool module callbacks to a common locationVadim Pasternak3-107/+139
Move the implementation of ethtool module callbacks - .get_module_info() and .get_module_eeprom() - to a common location to allow reuse by the different mlxsw drivers. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03fsl/fman: Use vsprintf extension %pMJoe Perches1-3/+1
Make logging of an ethernet address more consistent with the rest of the kernel. Miscellanea: The %02hx use also did not quite match the u8 definition of addr though that did not actually matter given normal integer promotion rules. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03dpaa2-eth: add XDP_REDIRECT supportIoana Radulescu3-14/+176
Implement support for the XDP_REDIRECT action. The redirected frame is transmitted and confirmed on the regular Tx/Tx conf queues. Frame is marked with the "XDP" type in the software annotation, since it requires special treatment. We don't have good hardware support for TX batching, so the XDP_XMIT_FLUSH flag doesn't make a difference for now; ndo_xdp_xmit performs the actual Tx operation on the spot. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03dpaa2-eth: Add software annotation typesIoana Radulescu2-22/+40
We write different metadata information in the software annotation area of Tx frames, depending on frame type. Make this more explicit by introducing a type field and separate structures for single buffer and scatter-gather frames. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03net: macb: Add support for suspend/resume with full power downHarini Katakam1-2/+38
When macb device is suspended and system is powered down, the clocks are removed and hence macb should be closed gracefully and restored upon resume. This patch does the same by switching off the net device, suspending phy and performing necessary cleanup of interrupts and BDs. Upon resume, all these are reinitialized again. Reset of macb device is done only when GEM is not a wake device. Even when gem is a wake device, tx queues can be stopped and ptp device can be closed (tsu clock will be disabled in pm_runtime_suspend) as wake event detection has no dependency on this. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03net: macb: Add pm runtime supportHarini Katakam1-36/+112
Add runtime pm functions and move clock handling there. Add runtime PM calls to mdio functions to allow for active mdio bus. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03net: macb: Support clock management for tsu_clkHarini Katakam2-6/+27
TSU clock needs to be enabled/disabled as per support in devicetree and it should also be controlled during suspend/resume (WOL has no dependency on this clock). Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03net: macb: Check MDIO state before read/write and use timeoutsHarini Katakam2-6/+29
Replace the while loop in MDIO read/write functions with a timeout. In addition, add a check for MDIO bus busy before initiating a new operation as well to make sure there is no ongoing MDIO operation. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03net: mscc: Enable all ports in QSGMIIKavya Sree Kotagiri1-3/+11
When Ocelot phy-mode is QSGMII, all 4 ports involved in QSGMII shall be kept out of reset and Tx lanes shall be enabled to pass the data. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Kavya Sree Kotagiri <kavyasree.kotagiri@microchip.com> Signed-off-by: Steen Hegelund <Steen.Hegelund@microchip.com> Co-developed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-02Merge tag 'mlx5-updates-2019-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller14-109/+604
Saeed Mahameed says: ==================== mlx5-updates-2019-03-01 This series adds multipath offload support and contains some small updates to mlx5 driver. Multipath offload support from Roi Dayan: We are going to track SW multipath route and related nexthops and reflect that as port affinity to the HW. 1) Some patches are preparation. 2) add the multipath mode and fib events handling. 3) add support to handle offload failure for net error, i.e. port down. 4) Small updates to match the behavior of multipath Two small updates from Eran Ben Elisha, 5) Make a function static 6) Update PCIe supported devices list. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller7-5/+48
2019-03-01net: mvpp2: set the GMAC, XLG MAC, XPCS and MPCS in reset when a port is downAntoine Tenart1-0/+3
This patch adds calls in the stop() helper to ensure both MACs and both PCS blocks are set in reset when the user manually sets a port down. This is done so that we have the exact same block reset states at boot time and when a port is set down. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01net: mvpp2: set the XPCS and MPCS in reset when not usedAntoine Tenart2-8/+59
This patch sets both the XPCS and MPCS blocks in reset when they aren't used. This is done both at boot time and when reconfiguring a port mode. The advantage now is that only the PCS used is set out of reset when the port is configured (10GKR uses the MCPS while RXAUI uses the XPCS). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.