aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-07-20net: ethernet: nb8800: fix error handling of nb8800_probe()Wei Yongjun1-1/+1
In ops->reset() error handling case, clk_disable_unprepare() is missed before return from this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Mans Rullgard <mans@mansr.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20net: axienet: Fix return value check in axienet_probe()Wei Yongjun1-2/+2
In case of error, the function of_parse_phandle() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: 46aa27df8853 ('net: axienet: Use devm_* calls') Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19net/mlx4_en: add xdp forwarding and data write supportBrenden Blanco5-8/+211
A user will now be able to loop packets back out of the same port using a bpf program attached to xdp hook. Updates to the packet contents from the bpf program is also supported. For the packet write feature to work, the rx buffers are now mapped as bidirectional when the page is allocated. This occurs only when the xdp hook is active. When the program returns a TX action, enqueue the packet directly to a dedicated tx ring, so as to avoid completely any locking. This requires the tx ring to be allocated 1:1 for each rx ring, as well as the tx completion running in the same softirq. Upon tx completion, this dedicated tx ring recycles pages without unmapping directly back to the original rx ring. In steady state tx/drop workload, effectively 0 page allocs/frees will occur. In order to separate out the paths between free and recycle, a free_tx_desc func pointer is introduced that is optionally updated whenever recycle_ring is activated. By default the original free function is always initialized. Signed-off-by: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19net/mlx4_en: break out tx_desc write into separate functionBrenden Blanco1-58/+76
In preparation for writing the tx descriptor from multiple functions, create a helper for both normal and blueflame access. Signed-off-by: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19net/mlx4_en: add page recycle to prepare rx ring for tx supportBrenden Blanco3-10/+109
The mlx4 driver by default allocates order-3 pages for the ring to consume in multiple fragments. When the device has an xdp program, this behavior will prevent tx actions since the page must be re-mapped in TODEVICE mode, which cannot be done if the page is still shared. Start by making the allocator configurable based on whether xdp is running, such that order-0 pages are always used and never shared. Since this will stress the page allocator, add a simple page cache to each rx ring. Pages in the cache are left dma-mapped, and in drop-only stress tests the page allocator is eliminated from the perf report. Note that setting an xdp program will now require the rings to be reconfigured. Before: 26.91% ksoftirqd/0 [mlx4_en] [k] mlx4_en_process_rx_cq 17.88% ksoftirqd/0 [mlx4_en] [k] mlx4_en_alloc_frags 6.00% ksoftirqd/0 [mlx4_en] [k] mlx4_en_free_frag 4.49% ksoftirqd/0 [kernel.vmlinux] [k] get_page_from_freelist 3.21% swapper [kernel.vmlinux] [k] intel_idle 2.73% ksoftirqd/0 [kernel.vmlinux] [k] bpf_map_lookup_elem 2.57% swapper [mlx4_en] [k] mlx4_en_process_rx_cq After: 31.72% swapper [kernel.vmlinux] [k] intel_idle 8.79% swapper [mlx4_en] [k] mlx4_en_process_rx_cq 7.54% swapper [kernel.vmlinux] [k] poll_idle 6.36% swapper [mlx4_core] [k] mlx4_eq_int 4.21% swapper [kernel.vmlinux] [k] tasklet_action 4.03% swapper [kernel.vmlinux] [k] cpuidle_enter_state 3.43% swapper [mlx4_en] [k] mlx4_en_prepare_rx_desc 2.18% swapper [kernel.vmlinux] [k] native_irq_return_iret 1.37% swapper [kernel.vmlinux] [k] menu_select 1.09% swapper [kernel.vmlinux] [k] bpf_map_lookup_elem Signed-off-by: Brenden Blanco <bblanco@plumgrid.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19net/mlx4_en: add support for fast rx drop bpf programBrenden Blanco3-4/+102
Add support for the BPF_PROG_TYPE_XDP hook in mlx4 driver. In tc/socket bpf programs, helpers linearize skb fragments as needed when the program touches the packet data. However, in the pursuit of speed, XDP programs will not be allowed to use these slower functions, especially if it involves allocating an skb. Therefore, disallow MTU settings that would produce a multi-fragment packet that XDP programs would fail to access. Future enhancements could be done to increase the allowable MTU. The xdp program is present as a per-ring data structure, but as of yet it is not possible to set at that granularity through any ndo. Signed-off-by: Brenden Blanco <bblanco@plumgrid.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19net/faraday: Mask PHY interrupt with NCSI modeGavin Shan1-12/+15
Bogus PHY interrupts are observed. This masks the PHY interrupt when the interface works in NCSI mode as there is no attached PHY under the circumstance. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19net/faraday: Match driver according to compatible propertyGavin Shan1-5/+11
This matches the driver with devices compatible with "faraday,ftgmac100" declared in the device tree. Originally, device's name from device tree for it. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19net/faraday: Support NCSI modeGavin Shan1-10/+75
This makes ftgmac100 driver support NCSI mode. The NCSI is enabled on the interface if property "use-nc-si" or "use-ncsi" is found from the device node in device tree. * No PHY device is used when NCSI mode is enabled. * The NCSI device (struct ncsi_dev) is created when probing the device while it's enabled/started when the interface is brought up. * Hardware IP checksum dosn't work when NCSI mode is enabled. It is disabled on enabled NCSI. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19net/faraday: Read MAC address from chipGavin Shan1-7/+62
The device is assigned with random MAC address. It isn't reasonable. An valid MAC address might have been provided by (uboot) firmware by device-tree or in chip. It's reasonable to use it to maintain consistency. This uses the MAC address from device-tree or that in the chip if it's valid. Otherwise, a random MAC address is given as before. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19net/faraday: Helper functions to create or destroy MDIO interfaceGavin Shan1-35/+60
This introduces two helper functions to create or destroy MDIO interface. No logical changes introduced except the proper MDIO names are given when having more than one MDIO bus. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19bnxt_en: Remove locking around txr->dev_stateFlorian Fainelli1-2/+0
txr->dev_state was not consistently manipulated with the acquisition of the per-queue lock, after further inspection the lock does not seem necessary, either the value is read as BNXT_DEV_STATE_CLOSING or 0. Reported-by: coverity (CID 1339583) Fixes: c0c050c58d840 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19bnxt_en: Add BCM58700 PCI device ID for NS2 Nitro.Prashant Sreedharan1-0/+6
A bridge device in NS2 has the same device ID as the ethernet controller. Add check to avoid probing the bridge device. Signed-off-by: Prashant Sreedharan <prashant.sreedharan@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19bnxt_en: Workaround Nitro A0 RX hardware bug (part 4).Prashant Sreedharan1-11/+53
Allocate special vnic for dropping packets not matching the RX filters. First vnic is for normal RX packets and the driver will drop all packets on the 2nd vnic. Signed-off-by: Prashant Sreedharan <prashant.sreedharan@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19bnxt_en: Workaround Nitro A0 hardware RX bug (part 3).Prashant Sreedharan1-1/+80
Allocate napi for special vnic, packets arriving on this napi will simply be dropped and the buffers will be replenished back to the HW. Signed-off-by: Prashant Sreedharan <prashant.sreedharan@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19bnxt_en: Workaround Nitro A0 hardware RX bug (part 2).Prashant Sreedharan2-4/+25
The hardware is unable to drop rx packets not matching the RX filters. To workaround it, we create a special VNIC and configure the hardware to direct all packets not matching the filters to it. We then setup the driver to drop packets received on this VNIC. This patch creates the infrastructure for this VNIC, reserves a completion ring, and rx rings. Only shared completion ring mode is supported. The next 2 patches add a NAPI to handle packets from this VNIC and the setup of the VNIC. Signed-off-by: Prashant Sreedharan <prashant.sreedharan@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19bnxt_en: Workaround Nitro A0 hardware RX bug (part 1).Prashant Sreedharan2-16/+39
Nitro A0 has a hardware bug in the rx path. The workaround is to create a special COS context as a path for non-RSS (non-IP) packets. Without this workaround, the chip may stall when receiving RSS and non-RSS packets. Add infrastructure to allow 2 contexts (RSS and CoS) per VNIC. Allocate and configure the CoS context for Nitro A0. Signed-off-by: Prashant Sreedharan <prashant.sreedharan@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19bnxt_en: Add basic support for Nitro in North Star 2.Prashant Sreedharan2-13/+28
Nitro is the embedded version of the ethernet controller in the North Star 2 SoC. Add basic code to recognize the chip ID and disable the features (ntuple, TPA, ring and port statistics) not supported on Nitro A0. Signed-off-by: Prashant Sreedharan <prashant.sreedharan@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19sh_eth: fix DMA channel misreportingSergei Shtylyov1-1/+0
Currently 'ifconfig' for the Ethernet devices handled by this driver shows "DMA chan: ff" while the driver doesn't use any DMA channels. Not assigning a value to 'net_device::dma' causes 'ifconfig' to correctly not report a DMA channel. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19ravb: fix DMA channel misreportingSergei Shtylyov1-1/+0
Currently 'ifconfig' for the Ethernet devices handled by this driver shows "DMA chan: ff" while the driver doesn't use any DMA channels. Not assigning a value to 'net_device::dma' causes 'ifconfig' to correctly not report a DMA channel. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19net: ti: cpmac: Use the correct function to free some resources.Christophe Jaillet1-1/+3
In 'cpmac_open', 'dma_alloc_coherent' has been used to allocate some resources, so we need to free them using 'dma_free_coherent' instead of 'kfree'. Also, we don't need to free these resources if the allocation has failed. So I have slighly modified the goto label in this case. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-17net: ethernet: marvell: pxa168_eth: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-21/+18
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-17net: ethernet: marvell: pxa168_eth: use phydev from struct net_devicePhilippe Reynes1-20/+16
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-17net: ethernet: adi: bfin_mac: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-23/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. There was a check on CAP_NET_ADMIN in bfin_mac_ethtool_setsettings, but this check is already done in dev_ethtool, so no need to repeat it before calling the generic function. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-17net: ethernet: adi: bfin_mac: use phydev from struct net_devicePhilippe Reynes2-20/+12
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-17dwc_eth_qos: Remove deprecated create_singlethread_workqueueBhaktipriya Shridhar1-1/+2
alloc_workqueue replaces deprecated create_singlethread_workqueue(). A dedicated workqueue has been used since the workitem viz lp->txtimeout_reinit is involved in reinitialization if a TX timeout occurs, which is necessary to guarantee forward progress in packet processing. As a network device can be used during memory reclaim, the workqueue needs forward progress guarantee under memory pressure. WQ_MEM_RECLAIM has been set to ensure this. Since there is only a single work item, explicit concurrency limit is unnecessary here. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-16net: hisilicon: Add Fast Ethernet MAC driverDongpo Li3-0/+1020
This patch adds the Hisilicon Fast Ethernet MAC(FEMAC) driver. The FEMAC supports max speed 100Mbps and has been used in many Hisilicon SoC. Signed-off-by: Dongpo Li <lidongpo@hisilicon.com> Reviewed-by: Jiancheng Xue <xuejiancheng@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-16net: cpsw: make TI_CPSW_PHY_SEL invisibleUwe Kleine-König1-2/+1
TI_CPSW_PHY_SEL depended on TI_CPSW and was selected by the latter. So there is no reason to have this symbol visible. A further optimisation would be to put the code for both symbols into a single module which would allow to not export at least cpsw_phy_sel() and simplify the module load process. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: ti: cpmac: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-21/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. There was a check on CAP_NET_ADMIN in cpmac_set_settings, but this check is already done in dev_ethtool, so no need to repeat it before calling the generic function. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: ti: cpmac: use phydev from struct net_devicePhilippe Reynes1-26/+20
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: amd: au1000_eth: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-21/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. There was a check on CAP_NET_ADMIN in au1000_set_settings, but this check is already done in dev_ethtool, so no need to repeat it before calling the generic function. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: amd: au1000_eth: use phydev from struct net_devicePhilippe Reynes2-25/+16
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: smsc9420: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-22/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: smsc9420: use phydev from struct net_devicePhilippe Reynes1-27/+17
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: ethoc: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-22/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Reviewed-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: ethoc: use phydev from struct net_devicePhilippe Reynes1-13/+7
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Reviewed-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: pasemi_mac: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-26/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: pasemi_mac: use phydev from struct net_devicePhilippe Reynes3-20/+15
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: xilinx: axienet: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-45/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: xilinx: axienet: use phydev from struct net_devicePhilippe Reynes2-21/+16
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: tc35815: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-16/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: tc35815: use phydev from struct net_devicePhilippe Reynes1-27/+18
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14mlxsw: spectrum_router: Return -ENOENT in case of errorChristophe Jaillet1-1/+1
'vr' should be a valid pointer here, so returning 'PTR_ERR(vr)' is wrong. Return an explicit error code (-ENOENT) instead. Fixes: 61c503f976 ("mlxsw: spectrum_router: Implement fib4 add/del switchdev obj ops") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net: ethernet: ll_temac: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-12/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net: ethernet: ll_temac: use phydev from struct net_devicePhilippe Reynes2-22/+16
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net/mlx5e: Add TC offload support for the VF representors netdeviceOr Gerlitz1-1/+34
The VF representors support only TC filter/action offloads (not mqprio) and this is enabled for them by default. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net/mlx5e: Add TC HW support for FDB (SRIOV e-switch) offloadsOr Gerlitz2-6/+34
Enhance the TC offload code such that when the eswitch exists and it's mode being SRIOV offloads, we do TC actions parsing and setup targeted for eswitch. Next, we add the offloaded flow to the HW e-switch (fdb). Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net/mlx5e: Add TC drop and mirred/redirect action parsing for SRIOV offloadsOr Gerlitz1-0/+53
Add the setup code that parses the TC actions needed to support offloading drop and mirred/redirect for SRIOV e-switch. We can redirect between two devices if they belong to the same HW switch, compare the switchdev HW ID attribute to enforce that. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net/mlx5e: Adjustments in the TC offload code towards reuse for SRIOVOr Gerlitz1-16/+16
Towards reusing the TC offloads code for an SRIOV use-case, change some of the helper functions to have _nic in their names so it's clear what's NIC unique and what's general. Also group together the NIC related helpers so we can easily branch per the use-case in downstream patch. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net/mlx5: E-Switch, Add API to configure rules for the offloaded modeOr Gerlitz2-0/+49
This allows for upper levels in the driver, e.g the TC offload code to add e-switch offloaded steering rules. The caller provides the rule spec for matching, action, source and destination vports. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.