aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-02-04sh_eth: offload RX checksum on R8A7740Sergei Shtylyov1-0/+1
The R-Mobile A1 (R8A7740) SoC manual describes the Ether MAC's RX checksum offload the same way as it's implemented in the EtherAVB MAC... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04sh_eth: offload RX checksum on R7S72100Sergei Shtylyov1-0/+1
The RZ/A1H (R7S721000) SoC manual describes the Ether MAC's RX checksum offload the same way as it's implemented in the EtherAVB MACs... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04sh_eth: RX checksum offload supportSergei Shtylyov2-2/+59
Add support for the RX checksum offload. This is enabled by default and may be disabled and re-enabled using 'ethtool': # ethtool -K eth0 rx off # ethtool -K eth0 rx on Some Ether MACs provide a simple checksumming scheme which appears to be completely compatible with CHECKSUM_COMPLETE: sum of all packet data after the L2 header is appended to packet data; this may be trivially read by the driver and used to update the skb accordingly. The same checksumming scheme is implemented in the EtherAVB MACs and now supported by the 'ravb' driver. In terms of performance, throughput is close to gigabit line rate with the RX checksum offload both enabled and disabled. The 'perf' output, however, appears to indicate that significantly less time is spent in do_csum() -- this is as expected. Test results with RX checksum offload enabled: ~/netperf-2.2pl4# perf record -a ./netperf -t TCP_MAERTS -H 192.168.2.4 TCP MAERTS TEST to 192.168.2.4 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.01 933.93 [ perf record: Woken up 8 times to write data ] [ perf record: Captured and wrote 1.955 MB perf.data (41940 samples) ] ~/netperf-2.2pl4# perf report Samples: 41K of event 'cycles:ppp', Event count (approx.): 9915302763 Overhead Command Shared Object Symbol 9.44% netperf [kernel.kallsyms] [k] __arch_copy_to_user 7.75% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irq 6.31% swapper [kernel.kallsyms] [k] default_idle_call 5.89% swapper [kernel.kallsyms] [k] arch_cpu_idle 4.37% swapper [kernel.kallsyms] [k] tick_nohz_idle_exit 4.02% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irq 2.52% netperf [kernel.kallsyms] [k] preempt_count_sub 1.81% netperf [kernel.kallsyms] [k] tcp_recvmsg 1.80% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irqres 1.78% netperf [kernel.kallsyms] [k] preempt_count_add 1.36% netperf [kernel.kallsyms] [k] __tcp_transmit_skb 1.20% netperf [kernel.kallsyms] [k] __local_bh_enable_ip 1.10% netperf [kernel.kallsyms] [k] sh_eth_start_xmit Test results with RX checksum offload disabled: ~/netperf-2.2pl4# perf record -a ./netperf -t TCP_MAERTS -H 192.168.2.4 TCP MAERTS TEST to 192.168.2.4 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.01 932.04 [ perf record: Woken up 14 times to write data ] [ perf record: Captured and wrote 3.642 MB perf.data (78817 samples) ] ~/netperf-2.2pl4# perf report Samples: 78K of event 'cycles:ppp', Event count (approx.): 18091442796 Overhead Command Shared Object Symbol 7.00% swapper [kernel.kallsyms] [k] do_csum 3.94% swapper [kernel.kallsyms] [k] sh_eth_poll 3.83% ksoftirqd/0 [kernel.kallsyms] [k] do_csum 3.23% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irq 2.87% netperf [kernel.kallsyms] [k] __arch_copy_to_user 2.86% swapper [kernel.kallsyms] [k] arch_cpu_idle 2.13% swapper [kernel.kallsyms] [k] default_idle_call 2.12% ksoftirqd/0 [kernel.kallsyms] [k] sh_eth_poll 2.02% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore 1.84% swapper [kernel.kallsyms] [k] __softirqentry_text_start 1.64% swapper [kernel.kallsyms] [k] tick_nohz_idle_exit 1.53% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irq 1.32% netperf [kernel.kallsyms] [k] preempt_count_sub 1.27% swapper [kernel.kallsyms] [k] __pi___inval_dcache_area 1.22% swapper [kernel.kallsyms] [k] check_preemption_disabled 1.01% ksoftirqd/0 [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore The above results collected on the R-Car V3H Starter Kit board. Based on the commit 4d86d3818627 ("ravb: RX checksum offload")... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04sh_eth: rename sh_eth_cpu_data::hw_checksumSergei Shtylyov2-8/+8
Commit 62e04b7e0e3c ("sh_eth: rename 'sh_eth_cpu_data::hw_crc'") renamed the field to 'hw_checksum' for the Ether DMAC "intelligent checksum", however some Ether MACs implement a simpler checksumming scheme, so that name now seems misleading. Rename that field to 'csmr' as the "intelligent checksum" is always controlled by the CSMR register. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-03net: devlink: report cell size of shared buffersJakub Kicinski2-0/+2
Shared buffer allocation is usually done in cell increments. Drivers will either round up the allocation or refuse the configuration if it's not an exact multiple of cell size. Drivers know exactly the cell size of shared buffer, so help out users by providing this information in dumps. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-03cxgb4/cxgb4vf: Program hash region for {t4/t4vf}_change_mac()Arjun Vynipadath4-40/+136
{t4/t4_vf}_change_mac() API's were only doing additions to MPS_TCAM. This will fail, when the number of tcam entries is limited particularly in vf's. This fix programs hash region with the mac address, when TCAM addtion fails for {t4/t4vf}_change_mac(). Since the locally maintained driver list for hash entries is shared across mac_{sync/unsync}(), added an extra parameter if_mac to track the address added thorugh {t4/t4vf}_change_mac() Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02atheros: atl2: fix an indentaion issue on a return statementColin Ian King1-1/+1
A return statment is not indented correctly, fix this by adding an extra tab. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02atl1c: fix indentation issue on an if statementColin Ian King1-4/+4
An if statement is indented one level too deep, fix this by removing the extra tabs. Also add some spaces to the dev_warn arguments to clean up checkpatch warnings. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02bna: fix indentation issue on call to bfa_ioc_pf_failedColin Ian King1-1/+1
The call to bfa_ioc_pf_failed is indented too far, fix this by removing a tab. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02chelsio: clean up indentation issueColin Ian King1-2/+1
The assignment to size is indented too far, fix this and join two lines into one. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02net: nixge: Separate ctrl and dma resourcesAlex Williams1-16/+58
The DMA engine is a separate entity altogether, and this allows the DMA controller's address to float elsewhere in the FPGA's map. Signed-off-by: Alex Williams <alex.williams@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02r8169: remove rtl_wol_pll_power_downHeiner Kallweit1-12/+4
rtl_wol_pll_power_down() is used in only one place and removing it makes the code simpler and better readable. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02net: hns3: MAC table entry count function increases operation 0 value protection measuresliuzhongzhu1-2/+5
When updating the available MAC VLAN table counts, MAC VLAN table entry count function adds operation 0 value protection measures. Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02net: hns3: modify the upper limit judgment conditionliuzhongzhu1-2/+2
In order to prevent the variable anomaly from being larger than desc_num, the upper limit judgment condition becomes >=. Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02net: hns3: don't allow user to change vlan filter stateJian Shen1-2/+1
When user disables vlan filter, and adds vlan device, it won't notify the driver the update the vlan filter. In this case, when user enables vlan filter again, the packets with new vlan tag will be filtered by vlan filter. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02net: hns3: optimize the maximum TC macroliuzhongzhu3-7/+6
Multiple macros with the largest number of TCs in the system, optimized to HCLGE_MAX_TC_NUM. Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02net: hns3: fix the problem that the supported port is emptyliuzhongzhu5-4/+77
Run ethtool ethx when displaying device information in VF， the supported port and link mode items will be empty. This patch fixes it. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02net: hns3: fix a wrong checking in the hclge_tx_buffer_calc()Huazhong Tan1-4/+5
Only the TC is enabled, we need to check whether the buffer is enough, otherwise it may lead to a wrong -ENOMEM case. Fixes: 9ffe79a9c2ee ("net: hns3: Support for dynamically assigning tx buffer to TC") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02net: hns3: move some set_bit statement into hclge_prepare_mac_addrWeihang Li1-13/+11
This patch does not change the code logic. There are some same set_bit statements called by add/rm_uc/mc_addr_common, and move this statements into hclge_prepare_mac_addr to reduce duplicate code. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02net: hns3: add hclge_cmd_check_retval() to parse comman's return valueWeihang Li1-27/+33
For simplifying the code, this patch adds hclge_cmd_check_retval() to check the return value of the command. Also, according the IMP's description, when there are several descriptors in a command, then the IMP will save the return value on the last description, so hclge_cmd_check_retval() just check the last one for this case. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02net: hns3: code optimization for hclge_rx_buffer_calcYunsheng Lin1-77/+63
There are four steps to calcuate the rx private buffer, each step can be done in a function to avoid code duplication and aid code readability. This patch adds three separate functions do the job. Also, the function name more or less make the comment redundant, so remove some obvious comment. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02net: hns3: Modify parameter type from int to bool in set_gro_enYonglong Liu4-20/+12
The second parameter to the hook function set_gro_en is always passed in true/false, so modify it's type from int to bool. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02net: hns3: fix an issue for hns3_update_new_int_glPeng Li1-1/+1
HNS3 supports setting rx-usecs|tx-usecs as 0, but it will not update dynamically when adaptive-tx or adaptive-rx is enable. This patch removes the Redundant check. Fixes: a95e1f8666e9 ("net: hns3: change the time interval of int_gl calculating") Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-02net: hns3: fix a code style issue for hns3_update_new_int_gl()Peng Li1-1/+1
Use the same code style for rx_group and tx_group in the hns3_update_new_int_gl(). Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-10/+82
Alexei Starovoitov says: ==================== pull-request: bpf-next 2019-02-01 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) introduce bpf_spin_lock, from Alexei. 2) convert xdp samples to libbpf, from Maciej. 3) skip verifier tests for unsupported program/map types, from Stanislav. 4) powerpc64 JIT support for BTF line info, from Sandipan. 5) assorted fixed, from Valdis, Jesper, Jiong. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01nfp: bpf: complete ALU32 logic shift supportsJiong Wang1-5/+67
The following ALU32 logic shift supports are missing: BPF_ALU | BPF_LSH | BPF_X BPF_ALU | BPF_RSH | BPF_X BPF_ALU | BPF_RSH | BPF_K For BPF_RSH | BPF_K, it could be implemented using NFP direct shift instruction. For the other BPF_X shifts, NFP indirect shifts sequences need to be used. Separate code-gen hook is assigned to each instruction to make the implementation clear. Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-02-01nfp: bpf: correct the behavior for shifts by zeroJiong Wang1-10/+20
Shifts by zero do nothing, and should be treated as nops. Even though compiler is not supposed to generate such instructions and manual written assembly is unlikely to have them, but they are legal instructions and have defined behavior. This patch correct existing shifts code-gen to make sure they do nothing when shift amount is zero except when the instruction is ALU32 for which high bits need to be cleared. For shift amount bigger than type size, already, NFP JIT back-end errors out for immediate shift and only low 5 bits will be taken into account for indirect shift which is the same as x86. Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-02-01nfp: devlink: report the running and flashed versionsJakub Kicinski1-0/+87
Report versions of firmware components using the new NSP command. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01nfp: nsp: add support for versions commandJakub Kicinski2-0/+81
Retrieve the FW versions with the new command. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01nfp: devlink: report fixed versionsJakub Kicinski1-1/+35
Report information about the hardware. RFCv2: - add defines for board IDs which are likely to be reusable for other drivers (Jiri). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01nfp: devlink: report driver name and serial numberJakub Kicinski1-0/+24
Report the basic info through new devlink info API. RFCv2: - add driver name; - align serial to core changes. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01nfp: use struct_size() in kzalloc()Gustavo A. R. Silva1-2/+1
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; instance = kzalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01tulip: eeprom: use struct_size() in kmalloc()Gustavo A. R. Silva1-3/+1
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; instance = kmalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01cxgb4: smt: use struct_size() in kvzalloc()Gustavo A. R. Silva1-2/+1
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; instance = kvzalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kvzalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01cxgb4: sched: use struct_size() in kvzalloc()Gustavo A. R. Silva1-1/+1
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; instance = kvzalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kvzalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01net: hns3: Check for allocation failureDan Carpenter1-0/+2
We should return -ENOMEM if the kcalloc() fails. Fixes: d174ea75c96a ("net: hns3: add statistics for PFC frames and MAC control frame") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-31r8169: improve WoL handlingHeiner Kallweit1-38/+1
WoL handling for the RTL8168 family is a little bit tricky because of different types of broken BIOS and/or chip quirks. Two known issues: 1. Network properly resumes from suspend only if WoL is enabled in the chip. 2. Some notebooks wake up immediately if system is suspended and network device is wakeup-enabled. Few patches tried to deal with this: 7edf6d314cd0 ("r8169: disable WOL per default") 18041b523692 ("r8169: restore previous behavior to accept BIOS WoL settings") Currently we have the situation that the chip WoL settings as set by the BIOS are respected (to prevent issue 1), but the device doesn't get wakeup-enabled (to prevent issue 2). This leads to another issue: If systemd is told to set WoL it first checks whether the requested settings are active already (and does nothing if yes). Due to the chip WoL flags being set properly systemd assumes that WoL is configured properly in our case. Result is that device doesn't get wakeup-enabled and WoL doesn't work (until it's set e.g. by ethtool). This patch now: - leaves the chip WoL settings as is (to prevent issue 1) - keeps the behavior to not wakeup-enable the device initially (to prevent issue 2) - In addition we report WoL as being disabled in get_wol, matching that device isn't wakeup-enabled. If systemd is told to enable WoL, it will therefore detect that it has to do something and will call set_wol. Of course the user still has the option to override this with e.g. ethtool. v2: - Don't just exclude __rtl8169_get_wol() from compiling, remove it. v3: - adjust commit message Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30net: hns3: keep flow director state unchanged when resetJian Shen2-5/+7
In orginal codes, driver always enables flow director when intializing. When user disable flow director with command ethtool -K, the flow director will be enabled again after resetting. This patch fixes it by only enabling it when first initialzing. Fixes: 6871af29b3ab ("net: hns3: Add reset handle for flow director") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30net: hns3: stop sending keep alive msg to PF when VF is resettingJian Shen1-0/+4
When VF is resetting, it can't communicate to PF with mailbox msg. This patch adds reset state checking before sending keep alive msg to PF. Fixes: a6d818e31d08 ("net: hns3: Add vport alive state checking support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30net: hns3: fix an issue for hclgevf_ae_get_hdevPeng Li1-1/+6
HNS3 VF driver support NIC and Roce, hdev stores NIC handle and Roce handle, should use correct parameter for container_of. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30net: hns3: fix improper error handling in the hclge_init_ae_dev()Huazhong Tan1-1/+1
While hclge_init_umv_space() failed in the hclge_init_ae_dev(), we should undo all the operation which has been done successfully, the last success operation maybe hclge_mac_mdio_config(), so if hclge_init_umv_space() failed, we also need to undo it. Fixes: 288475b2ad01 ("{topost} net: hns3: refine umv space allocation") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30net: hns3: fix for rss result nonuniformJian Shen2-6/+26
The rss result is more uniform when use recommended hash key from microsoft, instead of the one generated by netdev_rss_key_fill(). Also using hash algorithm "xor" is better than "toeplitz". This patch modifies the default hash key and hash algorithm. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30net: hns3: fix netif_napi_del() not do problem when unloadingHuazhong Tan1-20/+7
When the driver is unloading, if a global reset occurs, unmap_ring_from_vector() in the hns3_nic_uninit_vector_data() will fail, and hns3_nic_uninit_vector_data() just return. There may be some netif_napi_del() not be done. Since hardware will unmap all ring while resetting, so hns3_nic_uninit_vector_data() should ignore this error, and do the rest uninitialization. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30net: hns3: Fix NULL deref when unloading driverHuazhong Tan5-22/+40
When the driver is unloading, if there is a calling of ndo_open occurs between phy_disconnect() and unregister_netdev(), it will end up causing the kernel to eventually hit a NULL deref: [14942.417828] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000048 [14942.529878] Mem abort info: [14942.551166] ESR = 0x96000006 [14942.567070] Exception class = DABT (current EL), IL = 32 bits [14942.623081] SET = 0, FnV = 0 [14942.639112] EA = 0, S1PTW = 0 [14942.643628] Data abort info: [14942.659227] ISV = 0, ISS = 0x00000006 [14942.674870] CM = 0, WnR = 0 [14942.679449] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000224ad6ad [14942.695595] [0000000000000048] pgd=00000021e6673003, pud=00000021dbf01003, pmd=0000000000000000 [14942.723163] Internal error: Oops: 96000006 [#1] PREEMPT SMP [14942.729358] Modules linked in: hns3(O) hclge(O) pv680_mii(O) hnae3(O) [last unloaded: hclge] [14942.738907] CPU: 1 PID: 26629 Comm: kworker/u4:13 Tainted: G O 4.18.0-rc1-12928-ga960791-dirty #145 [14942.749491] Hardware name: Huawei Technologies Co., Ltd. D05/D05, BIOS Hi1620 FPGA TB BOOT BIOS B763 08/17/2018 [14942.760392] Workqueue: events_power_efficient phy_state_machine [14942.766644] pstate: 80c00009 (Nzcv daif +PAN +UAO) [14942.771918] pc : test_and_set_bit+0x18/0x38 [14942.776589] lr : netif_carrier_off+0x24/0x70 [14942.781033] sp : ffff0000121abd20 [14942.784518] x29: ffff0000121abd20 x28: 0000000000000000 [14942.790208] x27: ffff0000164d3cd8 x26: ffff8021da68b7b8 [14942.795832] x25: 0000000000000000 x24: ffff8021eb407800 [14942.801445] x23: 0000000000000000 x22: 0000000000000000 [14942.807046] x21: 0000000000000001 x20: 0000000000000000 [14942.812672] x19: 0000000000000000 x18: ffff000009781708 [14942.818284] x17: 00000000004970e8 x16: ffff00000816ad48 [14942.823900] x15: 0000000000000000 x14: 0000000000000008 [14942.829528] x13: 0000000000000000 x12: 0000000000000f65 [14942.835149] x11: 0000000000000001 x10: 00000000000009d0 [14942.840753] x9 : ffff0000121abaa0 x8 : 0000000000000000 [14942.846360] x7 : ffff000009781708 x6 : 0000000000000003 [14942.851970] x5 : 0000000000000020 x4 : 0000000000000004 [14942.857575] x3 : 0000000000000002 x2 : 0000000000000001 [14942.863180] x1 : 0000000000000048 x0 : 0000000000000000 [14942.868875] Process kworker/u4:13 (pid: 26629, stack limit = 0x00000000c909dbf3) [14942.876464] Call trace: [14942.879200] test_and_set_bit+0x18/0x38 [14942.883376] phy_link_change+0x38/0x78 [14942.887378] phy_state_machine+0x3dc/0x4f8 [14942.891968] process_one_work+0x158/0x470 [14942.896223] worker_thread+0x50/0x470 [14942.900219] kthread+0x104/0x130 [14942.903905] ret_from_fork+0x10/0x1c [14942.907755] Code: d2800022 8b400c21 f9800031 9ac32044 (c85f7c22) [14942.914185] ---[ end trace 968c9e12eb740b23 ]--- So this patch fixes it by modifying the timing to do phy_connect_direct() and phy_disconnect(). Fixes: 256727da7395 ("net: hns3: Add MDIO support to HNS3 Ethernet driver for hip08 SoC") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30net: hns3: only support tc 0 for VFYunsheng Lin3-16/+28
When the VF shares the same TC config as PF, the business running on PF and VF must have samiliar module. For simplicity, we are not considering VF sharing the same tc configuration as PF use case, so this patch removes the support of TC configuration from VF and forcing VF to just use single TC. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30net: hns3: change hnae3_register_ae_dev() to intHuazhong Tan3-4/+16
hnae3_register_ae_dev() may fail, and it should return a error code to its caller, so change hnae3_register_ae_dev() return type to int. Also, when hnae3_register_ae_dev() return error, hns3_probe() should do some error handling and return the error code. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30net: hns3: use the correct interface to stop|open portPeng Li1-2/+2
dev_close() stop the netdev and the service base on the netdev will stop. But ndev->netdev_ops->ndo_stop() may only stop HW and stack queue, the service base on the netdev can still work. Fixes: 5668abda0931 ("net: hns3: add support for set_ringparam") Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30net: hns3: fix VF dump register issueJian Shen1-0/+2
In original codes, the .get_regs_len and .get_regs were missed assigned. This patch fixes it. Fixes: 1600c3e5f23e ("net: hns3: Support "ethtool -d" for HNS3 VF driver") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30net: hns3: reuse the definition of l3 and l4 header info unionliyongxin2-27/+6
Union l3_hdr_info and l4_hdr_info have already been defined in the hns3_enet.h, so it is unnecessary to define them elsewhere. This patch removes the redundant definition, and reuses the one defined in the hns3_enet.h. Signed-off-by: liyongxin <liyongxin1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30net: ethernet: mediatek: support MT7621 SoC ethernet hardwareBjørn Mork3-8/+46
The Mediatek MT7621 SoC contains the same ethernet hardware module as used on a number of other MediaTek SoC parts. There are some minor differences to deal with but we can use the same driver to support them all. This patch is based on work by Bjørn Mork <bjorn@mork.no>, and his original patch is at: https://github.com/bmork/LEDE/commit/3293bc63f5461ca1eb0bbc4ed90145335e7e3404 There is an additional compatible devicetree type added, and the primary change to the code required is to support a single interrupt (for both RX and TX interrupts). Signed-off-by: Bjørn Mork <bjorn@mork.no> [gerg@kernel.org: rebase to mainline and irq handler fix] Signed-off-by: Greg Ungerer <gerg@kernel.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Sean Wang <sean.wang@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.