aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2020-05-28ixgbe: Remove unused inline function ixgbe_irq_disable_queuesYueHaibing1-29/+0
commit b5f69ccf6765 ("ixgbe: avoid bringing rings up/down as macvlans are added/removed") left behind this, remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28ixgbe: Use true, false for bool variable in __ixgbe_enable_sriov()Jason Yan1-1/+1
Fix the following coccicheck warning: drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c:105:2-38: WARNING: Assignment of 0/1 to bool variable Signed-off-by: Jason Yan <yanaijie@huawei.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28ixgbe: Remove conversion to bool in ixgbe_device_supports_autoneg_fc()Jason Yan1-2/+1
No need to convert '==' expression to bool. This fixes the following coccicheck warning: drivers/net/ethernet/intel/ixgbe/ixgbe_common.c:68:11-16: WARNING: conversion to bool not needed here Signed-off-by: Jason Yan <yanaijie@huawei.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28ixgbe: fix signed-integer-overflow warningXie XiuQi1-1/+1
ubsan report this warning, fix it by adding a unsigned suffix. UBSAN: signed-integer-overflow in drivers/net/ethernet/intel/ixgbe/ixgbe_common.c:2246:26 65535 * 65537 cannot be represented in type 'int' CPU: 21 PID: 7 Comm: kworker/u256:0 Not tainted 5.7.0-rc3-debug+ #39 Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 03/27/2020 Workqueue: ixgbe ixgbe_service_task [ixgbe] Call trace: dump_backtrace+0x0/0x3f0 show_stack+0x28/0x38 dump_stack+0x154/0x1e4 ubsan_epilogue+0x18/0x60 handle_overflow+0xf8/0x148 __ubsan_handle_mul_overflow+0x34/0x48 ixgbe_fc_enable_generic+0x4d0/0x590 [ixgbe] ixgbe_service_task+0xc20/0x1f78 [ixgbe] process_one_work+0x8f0/0xf18 worker_thread+0x430/0x6d0 kthread+0x218/0x238 ret_from_fork+0x10/0x18 Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28i40e: trivial fixup of comments in i40e_xsk.cJesper Dangaard Brouer1-3/+1
The comment above i40e_run_xdp_zc() was clearly copy-pasted from function i40e_xsk_umem_setup, which is just above. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28i40e: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai1-12/+12
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28net: hns3: print out speed info when parsing speed failsHuazhong Tan1-1/+2
When calling hclge_parse_speed() fails, printing out the speed is helpful for debugging. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: remove some unused fields in struct hclge_devHuazhong Tan1-6/+0
Remove some fields in struct hclge_dev which have not been used. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: remove two duplicated register macros in hclgevf_main.hHuazhong Tan2-6/+4
HCLGEVF_CMDQ_INTR_SRC_REG and HCLGEVF_CMDQ_INTR_STS_REG are same as HCLGEVF_VECTOR0_CMDQ_SRC_REG and HCLGEVF_VECTOR0_CMDQ_STAT_REG, replace the former with the latter, and rename macro HCLGEVF_VECTOR0_CMDQ_STAT_REG since 'stat' is not abbreviation of 'state'. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: remove unused struct hnae3_unic_private_infoHuazhong Tan1-11/+0
Since field .uinfo in struct hnae3_handle never be used, so remove it and its structure definition. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3; remove unused HNAE3_RESTORE_CLIENT in enum hnae3_reset_notify_typeHuazhong Tan1-1/+0
Remove HNAE3_RESTORE_CLIENT which is not needed now. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: remove some unused fields in struct hns3_nic_privHuazhong Tan1-22/+0
Remove some fileds which defined in struct hns3_nic_priv, but not used, and remove the related definition of struct hns3_udp_tunnel and enum hns3_udp_tnl_type. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: modify an incorrect type in struct hclgevf_cfg_gro_status_cmdHuazhong Tan2-3/+3
Modify field .gro_en in struct hclgevf_cfg_gro_status_cmd to u8 according to the UM, otherwise, it will overwrite the reserved byte which may be used for other purpose. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: modify an incorrect type in struct hclge_cfg_gro_status_cmdHuazhong Tan2-3/+3
Modify field .gro_en in struct hclge_cfg_gro_status_cmd to u8 according to the UM, otherwise, it will overwrite the reserved byte which may be used for other purpose. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: refactor hclge_query_bd_num_cmd_send()Huazhong Tan1-9/+12
In order to improve code maintainability and readability, rewrite the process of BDs' initialization in hclge_query_bd_num_cmd_send(). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: refactor hclge_config_tso()Huazhong Tan1-13/+4
Since parameters 'tso_mss_min' and 'tso_mss_max' only indicate the minimum and maximum MSS, the hnae3_set_field() calls are meaningless, remove them and change the type of these two parameters to u16. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: add a missing mutex destroy in hclge_init_ad_dev()Huazhong Tan1-0/+1
Add a mutex destroy call in hclge_init_ae_dev() when fails. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: remove an unnecessary 'goto' in hclge_init_ae_dev()Huazhong Tan1-4/+2
Remove the redundant 'goto' and return -ENOMEM directly, when allocating memory for 'hdev' fails in hclge_init_ae_dev(). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Remove ks8851_mll.cMarek Vasut1-1393/+0
The ks8851_mll.c is replaced by ks8851_par.c, which is using common code from ks8851.c, just like ks8851_spi.c . Remove this old ad-hoc driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Implement Parallel bus operationsMarek Vasut3-0/+360
Implement accessors for KS8851-16MLL/MLLI/MLLU parallel bus variant of the KS8851. This is based off the ks8851_mll.c , which is a driver for exactly the same hardware, however the ks8851.c code is much higher quality. Hence, this patch pulls out the relevant information from the ks8851_mll.c on how to access the bus, but uses the common ks8851.c code. To make this patch reviewable, instead of rewriting ks8851_mll.c, ks8851_mll.c is removed in a separate subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Separate SPI operations into separate fileMarek Vasut4-597/+642
Pull all the SPI bus specific code into a separate file, so that it is not mixed with the common code. Rename ks8851.c to ks8851_common.c. The ks8851_common.c is linked with ks8851_spi.c now, so it can call the accessors in the ks8851_spi.c without any pointer indirection. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Implement register, FIFO, lock accessor callbacksMarek Vasut1-22/+156
The register and FIFO accessors are bus specific, so is locking. Implement callbacks so that each variant of the KS8851 can implement matching accessors and locking, and use the rest of the common code. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Permit overridding interrupt enable registerMarek Vasut1-11/+11
The parallel bus variant does not need to use the TX interrupt at all as it writes the TX FIFO directly with in .ndo_start_xmit, permit the drivers to configure the interrupt enable bits. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Factor out TX work flush functionMarek Vasut1-4/+12
While the SPI version of the KS8851 requires a TX worker thread to pump data via SPI, the parallel bus version can write data into the TX FIFO directly in .ndo_start_xmit, as the parallel bus access is much faster and does not sleep. Factor out this TX work flush part, so it can be overridden by the parallel bus driver. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Split out SPI specific code from probe() and remove()Marek Vasut1-38/+48
Factor out common code into ks8851_probe_common() and ks8851_remove_common() to permit both SPI and parallel bus driver variants to use the common code path for both probing and removal. There should be no functional change. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Split out SPI specific entries in struct ks8851_netMarek Vasut1-49/+79
Add a new struct ks8851_net_spi, which embeds the original struct ks8851_net and contains the entries specific only to the SPI variant of KS8851. There should be no functional change. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Factor out SKB receive functionMarek Vasut1-1/+10
Factor out this netif_rx_ni(), so it could be overridden by the parallel bus variant of the KS8851 driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Factor out bus lock handlingMarek Vasut1-29/+68
Pull out bus access locking code into separate functions, this is done in preparation for unifying the driver with the parallel bus one. The parallel bus driver does not need heavy mutex locking of the bus and works better with spinlocks, hence prepare these locking functions to be overridden then. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Use 16-bit read of RXFC registerMarek Vasut1-16/+1
The RXFC register is the only one being read using 8-bit accessors. To make it easier to support the 16-bit accesses used by the parallel bus variant of KS8851, use 16-bit accessor to read RXFC register as well as neighboring RXFCTR register. Remove ks8851_rdreg8() as it is not used anywhere anymore. There should be no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Use 16-bit writes to program MAC addressMarek Vasut2-35/+14
On the SPI variant of KS8851, the MAC address can be programmed with either 8/16/32-bit writes. To make it easier to support the 16-bit parallel option of KS8851 too, switch both the MAC address programming and readout to 16-bit operations. Remove ks8851_wrreg8() as it is not used anywhere anymore. There should be no functional change. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Remove ks8851_rdreg32()Marek Vasut1-23/+2
The ks8851_rdreg32() is used only in one place, to read two registers using a single read. To make it easier to support 16-bit accesses via parallel bus later on, replace this single read with two 16-bit reads from each of the registers and drop the ks8851_rdreg32() altogether. If this has noticeable performance impact on the SPI variant of KS8851, then we should consider using regmap to abstract the SPI and parallel bus options and in case of SPI, permit regmap to merge register reads of neighboring registers into single, longer, read. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Use dev_{get,set}_drvdata()Marek Vasut1-2/+4
Replace spi_{get,set}_drvdata() with dev_{get,set}_drvdata(), which works for both SPI and platform drivers. This is done in preparation for unifying the KS8851 SPI and parallel bus drivers. There should be no functional change. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Use devm_alloc_etherdev()Marek Vasut1-9/+4
Use device managed version of alloc_etherdev() to simplify the code. No functional change intended. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Pass device node into ks8851_init_mac()Marek Vasut1-3/+4
Since the driver probe function already has a struct device *dev pointer and can easily derive of_node pointer from it, pass the of_node pointer as a parameter to ks8851_init_mac() to avoid fishing it out from ks->spidev. This is the only reference to spidev in the function, so get rid of it. This is done in preparation for unifying the KS8851 SPI and parallel bus drivers. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Replace dev_err() with netdev_err() in IRQ handlerMarek Vasut1-1/+1
Use netdev_err() instead of dev_err() to avoid accessing the spidev->dev in the interrupt handler. This is the only place which uses the spidev in this function, so replace it with netdev_err() to get rid of it. This is done in preparation for unifying the KS8851 SPI and parallel drivers. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Rename ndev to netdev in probeMarek Vasut1-15/+15
Rename ndev variable to netdev for the sake of consistency. No functional change. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Factor out spi->dev in probe()/remove()Marek Vasut1-15/+14
Pull out the spi->dev into one common place in the function instead of having it repeated over and over again. This is done in preparation for unifying ks8851 and ks8851-mll drivers. No functional change. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28ice: Refactor VF VSI release and setup functionsBrett Creeley1-31/+55
Currently when a VF VSI calls ice_vsi_release() and ice_vsi_setup() it subsequently clears/sets the VF cached variables for lan_vsi_idx and lan_vsi_num. This works fine, but can be improved by handling this in the VF specific VSI release and setup functions. Also, when a VF VSI is setup too many parameters are passed that can be derived from the VF. Fix this by only calling VF VSI setup with the bare minimum parameters. Also, add functionality to invalidate a VF's VSI when it's released and/or setup fails. This will make it so a VF VSI cannot be accessed via its cached vsi_idx/vsi_num in these cases. Finally when a VF's VSI is invalidated set the lan_vsi_idx and lan_vsi_num to ICE_NO_VSI to clearly show that there is no valid VSI associated with this VF. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28ice: Refactor VF resetBrett Creeley2-187/+130
Currently VF VSI are being reset twice during a PFR or greater. This is causing reset, specifically resetting all VFs, to take too long. This is causing various issues with VF drivers not being able to gracefully handle the VF reset timeout. Fix this by refactoring how VF reset is handled for the case mentioned previously and for the VFR/VFLR case. The refactor was done by doing the following: 1. Removing the call to ice_vsi_rebuild_by_type for ICE_VSI_VF VSI, which was causing the initial VSI rebuild. 2. Adding functions for pre/post VSI rebuild functions that can be called in both the reset all VFs case and reset individual VF case. 3. Adding VSI rebuild functions that are specific for the reset all VFs case and adding functions that are specific for the reset individual VF case. 4. Calling the pre-rebuild function, then the specific VSI rebuild function based on the reset type, and then calling the post-rebuild function to handle VF resets. This patch series makes some assumptions about how VSI are handling by FW during reset: 1. During a PFR or greater all VSI in FW will be cleared. 2. During a VFR/VFLR the VSI rebuild responsibility is in the hands of the PF software. 3. There is code in the ice_reset_all_vfs() case to amortize operations if possible. This was left intact. 4. PF software should not be replaying VSI based filters that were added other than host configured, PF software configured, or the VF's default/LAA MAC. This is the VF drivers job after it has been reset. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28ice: remove VM/VF disable command on CORER/GLOBR resetPaul Greenwalt1-11/+0
Remove VM/VF disable AQC (opcode 0x0C31) when resetting all VFs. This is not required for CORER/GLOBR reset. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28ice: Add functions to rebuild host VLAN/MAC config for a VFBrett Creeley1-32/+89
When resetting a VF the VLAN and MAC filter configurations need to be replayed. Add helper functions for this purpose. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28ice: Add function to set trust mode bit on resetBrett Creeley1-4/+13
As the title says, use a function to set trust mode bit on reset. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28ice: Renaming and simplification in VF init pathBrett Creeley1-29/+54
Some function names weren't very clear and some portions of VF creation could be moved into functions for clarity. Fix this by renaming some functions and move pieces of code into clearly name functions. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28ice: Separate VF VSI initialization/creation from reset flowBrett Creeley1-4/+106
Currently the same flow is used for VF VSI initialization/creation and VF VSI reset. This makes the initialization/creation flow unnecessarily complicated. Fix this by separating the initialization/creation of the VF VSI from the reset flow. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28ice: Add helper function for clearing VPGEN_VFRTRIGBrett Creeley1-11/+20
Create a helper function for clearing VPGEN_VFRTRIG as this needs to be done on reset to notify the VF that we are done resetting it. Also, it needs to be done on SR-IOV initialization/creation in case it was left in a bad state after SR-IOV tear down. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28ice: Simplify ice_sriov_configureBrett Creeley1-24/+48
Add a new function for checking if SR-IOV can be configured based on the PF and/or device's state/capabilities. Also, simplify the flow in ice_sriov_configure(). Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28ice: Refactor ice_ena_vf_mappings to split MSIX and queue mappingsBrett Creeley1-31/+58
Currently ice_ena_vf_mappings() does all of the VF's MSIX and queue mapping in one function. This makes it hard to digest. Fix this by creating a new function for enabling MSIX mappings and one for enabling queue mappings. Also, rename some variables in the functions for clarity. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28ice: Declare functions staticTony Nguyen2-6/+3
ice_get_pfa_module_tlv() and ice_read_sr_word() are not being called outside of their file. Declare them as static. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28ice: fix kernel BUG if register_netdev failsJacob Keller1-2/+4
If register_netdev() fails, the driver will attempt to cleanup the q_vectors and inadvertently trigger a kernel BUG due to a NULL pointer dereference. This occurs because cleaning up q_vectors attempts to call netif_napi_del on napi_structs which were never initialized. Resolve this by releasing the netdev in ice_cfg_netdev and setting vsi->netdev to NULL. This ensures that after ice_cfg_netdev fails the state is rewound to match as if ice_cfg_netdev was never called. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28ice: fix potential double free in probe unrollingJacob Keller1-1/+2
If ice_init_interrupt_scheme fails, ice_probe will jump to clearing up the interrupts. This can lead to some static analysis tools such as the compiler sanitizers complaining about double free problems. Since ice_init_interrupt_scheme already unrolls internally on failure, there is no need to call ice_clear_interrupt_scheme when it fails. Add a new unroll label and use that instead. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.