aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2020-05-01net: ethernet: stmmac: simplify phy modes management for stm32Christophe Roullier1-30/+44
No new feature, just to simplify stm32 part to be easier to use. Add by default all Ethernet clocks in DT, and activate or not in function of phy mode, clock frequency, if property "st,ext-phyclk" is set or not. Keep backward compatibility -------------------------------------------------------------------------- |PHY_MODE | Normal | PHY wo crystal| PHY wo crystal | No 125Mhz | | | | 25MHz | 50MHz | from PHY | -------------------------------------------------------------------------- | MII | - | eth-ck | n/a | n/a | | | | st,ext-phyclk | | | -------------------------------------------------------------------------- | GMII | - | eth-ck | n/a | n/a | | | | st,ext-phyclk | | | -------------------------------------------------------------------------- | RGMII | - | eth-ck | n/a | eth-ck | | | | st,ext-phyclk | |st,eth-clk-sel| | | | | | or | | | | | | st,ext-phyclk| ----------------==-------------------------------------------------------- | RMII | - | eth-ck | eth-ck | n/a | | | | st,ext-phyclk | st,eth-ref-clk-sel | | | | | | or st,ext-phyclk | | -------------------------------------------------------------------------- Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01r8169: switch from netif_xxx message functions to netdev_xxxHeiner Kallweit1-46/+22
Considering the few messages we have in the driver, there's not really a benefit in being able to control them on a message type level. Therefore simplify the code and switch to the netdev_xxx message functions. In addition add net_ratelimit() to messages that can be printed from a hot path. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01r8169: remove "out of memory" error message from rtl_request_firmwareHeiner Kallweit1-3/+1
When preparing an unrelated change, checkpatch complained about this redundant out-of-memory message. Therefore remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01r8169: simplify counter handlingHeiner Kallweit1-25/+13
The counter handling functions can only fail if rtl8169_do_counters() times out. In the poll function we emit an error message in case of timeout, therefore we don't have to propagate the timeout all the way up just to print another message basically saying the same. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01r8169: remove redundant driver message when entering promiscuous modeHeiner Kallweit1-2/+0
Net core - __dev_set_promiscuity - prints a message already when promiscuous mode in entered/left, therefore we don't have to do this in the driver too. Also the driver message would be misleading (would be because "link" message level is disabled per default) because it would print "promisc mode enabled" even if it's being left. Reason is that __dev_change_flags() calls dev_set_rx_mode() before touching the promisc flag. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01docs: networking: device drivers: convert ti/tlan.txt to ReSTMauro Carvalho Chehab2-2/+2
- add SPDX header; - adjust titles and chapters, adding proper markups; - mark tables as such; - mark code blocks and literals as such; - adjust identation, whitespaces and blank lines where needed; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01docs: networking: device drivers: convert smsc/smc9.txt to ReSTMauro Carvalho Chehab1-2/+2
- add SPDX header; - mark code blocks and literals as such; - adjust identation, whitespaces and blank lines where needed; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01docs: networking: device drivers: convert neterion/vxge.txt to ReSTMauro Carvalho Chehab1-1/+1
- add SPDX header; - adjust titles and chapters, adding proper markups; - comment out text-only TOC from html/pdf output; - mark code blocks and literals as such; - adjust identation, whitespaces and blank lines where needed; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01docs: networking: device drivers: convert neterion/s2io.txt to ReSTMauro Carvalho Chehab1-1/+1
- add SPDX header; - add a document title; - comment out text-only TOC from html/pdf output; - mark code blocks and literals as such; - adjust identation, whitespaces and blank lines where needed; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01docs: networking: device drivers: convert dlink/dl2k.txt to ReSTMauro Carvalho Chehab1-1/+1
- add SPDX header; - mark code blocks and literals as such; - mark lists as such; - adjust identation, whitespaces and blank lines where needed; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01docs: networking: device drivers: convert dec/dmfe.txt to ReSTMauro Carvalho Chehab1-1/+1
- add SPDX header; - adjust titles and chapters, adding proper markups; - comment out text-only TOC from html/pdf output; - mark code blocks and literals as such; - mark tables as such; - adjust identation, whitespaces and blank lines where needed; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01docs: networking: device drivers: convert dec/de4x5.txt to ReSTMauro Carvalho Chehab1-1/+1
- add SPDX header; - add a document title; - mark code blocks and literals as such; - adjust identation, whitespaces and blank lines where needed; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01docs: networking: device drivers: convert cirrus/cs89x0.txt to ReSTMauro Carvalho Chehab1-1/+1
- add SPDX header; - adjust title markup; - mark code blocks and literals as such; - adjust identation, whitespaces and blank lines where needed; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01docs: networking: device drivers: convert chelsio/cxgb.txt to ReSTMauro Carvalho Chehab1-1/+1
- add SPDX header; - use copyright symbol; - adjust titles and chapters, adding proper markups; - comment out text-only TOC from html/pdf output; - mark code blocks and literals as such; - add notes markups; - mark tables as such; - mark lists as such; - adjust identation, whitespaces and blank lines where needed; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01docs: networking: device drivers: convert 3com/vortex.txt to ReSTMauro Carvalho Chehab2-3/+3
- add SPDX header; - add a document title; - mark code blocks and literals as such; - mark tables as such; - adjust identation, whitespaces and blank lines where needed; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01net/mlx5: Add support to get lag physical portMaor Gottlieb1-0/+24
Add function to get the device physical port of the lag slave. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-01net/mlx5: Change lag mutex lock to spin lockMaor Gottlieb1-21/+21
The lag lock could be a spin lock, the critical section is short and there is no need that the thread will sleep. Change the lock that protects the LAG structure from mutex to spin lock. It is required for next patch that need to access this structure from context that we can't sleep. In addition there is no need to hold this lock when query the congestion counters. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-01r8169: remove not needed parameter in rtl8169_set_magic_regHeiner Kallweit1-2/+2
Remove a not needed parameter in rtl8169_set_magic_reg. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30cxgb4: fix EOTID leak when disabling TC-MQPRIO offloadRahul Lakkireddy1-3/+36
Under heavy load, the EOTID termination FLOWC request fails to get enqueued to the end of the Tx ring due to lack of credits. This results in EOTID leak. When disabling TC-MQPRIO offload, the link is already brought down to cleanup EOTIDs. So, flush any pending enqueued skbs that can't be sent outside the wire, to make room for FLOWC request. Also, move the FLOWC descriptor consumption logic closer to when the FLOWC request is actually posted to hardware. Fixes: 0e395b3cb1fb ("cxgb4: add FLOWC based QoS offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30stmmac: intel: Fix kernel crash due to wrong error pathAndy Shevchenko1-1/+3
Unfortunately sometimes ->probe() may fail. The commit b9663b7ca6ff ("net: stmmac: Enable SERDES power up/down sequence") messed up with error handling and thus: [ 12.811311] ------------[ cut here ]------------ [ 12.811993] kernel BUG at net/core/dev.c:9937! Fix this by properly crafted error path. Fixes: b9663b7ca6ff ("net: stmmac: Enable SERDES power up/down sequence") Cc: Voon Weifeng <weifeng.voon@intel.com> Cc: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30hinic: Use kmemdup instead of kzalloc and memcpyZou Wei1-6/+3
Fixes coccicheck warnings: drivers/net/ethernet/huawei/hinic/hinic_hw_mbox.c:452:17-24: WARNING opportunity for kmemdup drivers/net/ethernet/huawei/hinic/hinic_hw_mbox.c:458:23-30: WARNING opportunity for kmemdup Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30hinic: make symbol 'dump_mox_reg' staticZheng Bin1-1/+1
Fix sparse warnings: drivers/net/ethernet/huawei/hinic/hinic_hw_mbox.c:601:6: warning: symbol 'dump_mox_reg' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30r8169: configure PME_SIGNAL for RTL8125 tooHeiner Kallweit1-1/+1
RTL8125 supports the same PME_SIGNAL handling as all later RTL8168 chip variants. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30r8169: improve max jumbo packet size definitionHeiner Kallweit1-4/+4
Sync definition of max jumbo packet size with vendor driver and reserve 22 bytes for VLAN ethernet header plus checksum. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30mlxsw: spectrum_acl_tcam: Position vchunk in a vregion list properlyJiri Pirko1-2/+10
Vregion helpers to get min and max priority depend on the correct ordering of vchunks in the vregion list. However, the current code always adds new chunk to the end of the list, no matter what the priority is. Fix this by finding the correct place in the list and put vchunk there. Fixes: 22a677661f56 ("mlxsw: spectrum: Introduce ACL core with simple TCAM implementation") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30dpaa2-eth: fix error return code in setup_dpni()Wei Yongjun1-1/+3
Fix to return negative error code -ENOMEM from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30net: ll_temac: Fix return value check in temac_probe()Wei Yongjun1-4/+4
In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30net: ethernet: fec: Revert "net: ethernet: fec: Replace interrupt driven MDIO with polled IO"Fugang Duan2-35/+36
This reverts commit 29ae6bd1b0d8a57d7c00ab12cbb949fc41986eef. The commit breaks ethernet function on i.MX6SX, i.MX7D, i.MX8MM, i.MX8MQ, and i.MX8QXP platforms. Boot yocto system by NFS mounting rootfs will be failed with the commit. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30net: lpc-enet: fix error return code in lpc_mii_init()Wei Yongjun1-1/+2
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: b7370112f519 ("lpc32xx: Added ethernet driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30ice: Fix error return code in ice_add_prof()Wei Yongjun1-1/+3
Fix to return a error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 31ad4e4ee1e4 ("ice: Allocate flow profile") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30octeontx2-pf: Fix error return code in otx2_probe()Wei Yongjun1-2/+6
Fix to return negative error code -ENOMEM from the error handling case instead of 0, as done elsewhere in this function. Fixes: 5a6d7c9daef3 ("octeontx2-pf: Mailbox communication with AF") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30net: macb: Fix runtime PM refcountingAndy Shevchenko1-3/+9
The commit e6a41c23df0d, while trying to fix an issue, ("net: macb: ensure interface is not suspended on at91rm9200") introduced a refcounting regression, because in error case refcounter must be balanced. Fix it by calling pm_runtime_put_noidle() in error case. While here, fix the same mistake in other couple of places. Fixes: e6a41c23df0d ("net: macb: ensure interface is not suspended on at91rm9200") Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30dpaa_eth: Fix comparing pointer to 0Aishwarya Ramakrishnan1-1/+1
Fixes coccicheck warning: ./drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:2110:30-31: WARNING comparing pointer to 0 Avoid pointer type value compared to 0. Signed-off-by: Aishwarya Ramakrishnan <aishwaryarj100@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30net: moxa: Fix a potential double 'free_irq()'Christophe JAILLET1-1/+1
Should an irq requested with 'devm_request_irq' be released explicitly, it should be done by 'devm_free_irq()', not 'free_irq()'. Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30ionic: add device reset to fw upgrade downShannon Nelson1-0/+1
Doing a device reset addresses an obscure FW timing issue in the FW upgrade process. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30ionic: refresh devinfo after fw-upgradeShannon Nelson1-0/+1
Make sure we can report the new FW version after a fw-upgrade has finished by re-reading the device's fw version information. Fixes: c672412f6172 ("ionic: remove lifs on fw reset") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30ionic: no link check until after probeShannon Nelson1-2/+0
Don't bother with the link check during probe, let the watchdog notice the first link-up. This allows probe to finish cleanly without any interruptions from over excited user programs opening the device as soon as it is registered. Fixes: c672412f6172 ("ionic: remove lifs on fw reset") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30r8169: add check for invalid parameter combination in rtl_set_coalesceHeiner Kallweit1-0/+5
Realtek provided information about a HW constraint that time limit must not be set to 0 if the frame limit is >0. Add a check for this and reject invalid parameter combinations. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30r8169: improve rtl_set_coalesceHeiner Kallweit1-40/+30
Use FIELD_PREP() to make the code better readable, and avoid the loop. No functional change intended. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30r8169: improve interrupt coalescing parameter handlingHeiner Kallweit1-6/+6
The chip supports only frame limits 0, 4, 8, .. 60 internally. Returning EINVAL for all val % 4 != 0 seems to be a little bit too unfriendly to the user. Therefore round up the frame limit to the next supported value. In addition round up the time limit, else a very low limit could be rounded down to 0, and interpreted as "ignore value" by the chip. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30r8169: improve rtl_coalesce_choose_scaleHeiner Kallweit1-6/+7
The time limit provided by userspace is multiplied with 1000, what could result in an overflow. Therefore change the time limit parameter unit from ns to us, and avoid the problematic operation. If there's no matching scale because provided time limit is too big, return ERANGE instead of EINVAL to provide a hint to the user what's wrong. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30r8169: improve rtl_get_coalesceHeiner Kallweit1-26/+20
Use FIELD_GET() macro to make the code better readable. In addition change the logic to round the time limit up, not down. Reason is that a time limit <1us would be rounded to 0 currently, what would be interpreted as "no time limit set". Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30r8169: merge scale for tx and rx irq coalescingHeiner Kallweit1-40/+25
Rx and tx scale are the same always. Simplify the code by using one scale for rx and tx only. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30r8169: don't pass net_device to irq coalescing sub-functionsHeiner Kallweit1-6/+6
The net_device argument is just used to get a struct rtl8169_private pointer via netdev_priv(). Therefore pass the struct rtl8169_private pointer directly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30ibmvnic: Skip fatal error reset after passive initJuliet Kim1-1/+2
During MTU change, the following events may happen. Client-driven CRQ initialization fails due to partner’s CRQ closed, causing client to enqueue a reset task for FATAL_ERROR. Then passive (server-driven) CRQ initialization succeeds, causing client to release CRQ and enqueue a reset task for failover. If the passive CRQ initialization occurs before the FATAL reset task is processed, the FATAL error reset task would try to access a CRQ message queue that was freed, causing an oops. The problem may be most likely to occur during DLPAR add vNIC with a non-default MTU, because the DLPAR process will automatically issue a change MTU request. Fix this by not processing fatal error reset if CRQ is passively initialized after client-driven CRQ initialization fails. Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30Merge tag 'mlx5-updates-2020-04-30' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller62-1833/+919
Saeed Mahameed says: ==================== mlx5-updates-2020-04-30 1) Add release all pages support, From Eran. to release all FW pages at once on driver unload, when supported by FW. 2) From Maxim and Tariq, Trivial Data path cleanup and code improvements in preparation for their next features, TLS offload and TX performance improvements 3) Multiple cleanups. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30mlxsw: spectrum_span: Remove old SPAN APIIdo Schimmel2-209/+2
Remove the old SPAN API now that matchall-based and flower-based mirroring were converted to use the new API. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30mlxsw: spectrum_span: Use new analyzed ports list during speed / MTU changeIdo Schimmel1-37/+35
As previously explained, each port whose outgoing traffic is analyzed needs to have an egress mirror buffer. The size of the egress mirror buffer is calculated based on various parameters, two of which are the speed and the MTU of the port. Therefore, when the MTU or the speed of a port change, the SPAN code is called to see if the egress mirror buffer of the port needs to be adjusted. Currently, this is done by traversing all the SPAN agents and for each SPAN agent the list of bound ports is traversed. Instead of the above, traverse the recently added list of analyzed ports. This will later allow us to remove the old SPAN API. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30mlxsw: spectrum_acl: Convert flower-based mirroring to new SPAN APIIdo Schimmel1-12/+19
In flower-based mirroring, mirroring is done with ACLs and the SPAN agent is not bound to a port. Instead its identifier is specified in an ACL action. Convert this type of mirroring to use the new API. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30mlxsw: spectrum: Convert matchall-based mirroring to new SPAN APIIdo Schimmel1-12/+38
In matchall-based mirroring, mirroring is not done with ACLs, but a SPAN agent is bound to the ingress / egress of a port and all incoming / outgoing traffic is mirrored. Convert this type of mirroring to use the new API. First the SPAN agent is resolved, then the port is marked as analyzed and its egress mirror buffer is potentially allocated. Lastly, the binding is performed. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.