| Age | Commit message (Collapse) | Author | Files | Lines | |
|---|---|---|---|---|---|
| 2020-02-19 | octeontx2-af: Remove unnecessary export symbols in CGX driver |   Sunil Goutham | 1 | -18/+0 | |
| Since CGX driver and AF driver are built into a single module the export symbols in CGX driver are not needed. This patch gets rid of them. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-19 | net/mlx5e: Replace zero-length array with flexible-array member |   Gustavo A. R. Silva | 4 | -5/+5 | |
| The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> | |||||
| 2020-02-18 | net/mlx5: Remove a useless 'drain_workqueue()' call in 'mlx5e_ipsec_cleanup()' |   Christophe JAILLET | 1 | -1/+0 | |
| 'destroy_workqueue()' already calls 'drain_workqueue()', there is no need to call it explicitly. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||||
| 2020-02-18 | net/mlx5e: Add support for FEC modes based on 50G per lane links |   Aya Levin | 3 | -16/+94 | |
| Introduce new FEC modes: - RS-FEC-(544,514) - LL_RS-FEC-(272,257+1) Add support in ethtool for set and get callbacks for the new modes above. While RS-FEC-(544,514) is mapped to exsiting RS FEC mode, LL_RS-FEC-(272,257+1) is mapped to a new ethtool link mode: LL-RS. Add support for FEC on 50G per lane link modes up to 400G. The new link modes uses a u16 fields instead of u8 fields for the legacy link modes. Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||||
| 2020-02-18 | net/mlxe5: Separate between FEC and current speed | Aya Levin | 1 | -84/+62 | |
| FEC mode is per link type, not necessary per speed. This patch access FEC register by link modes instead of speeds. This patch will allow further enhacment of link modes supporting FEC with the same speed (different lane type). Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||||
| 2020-02-18 | net/mlx5e: Advertise globaly supported FEC modes | Aya Levin | 3 | -35/+37 | |
| Ethtool advertise supported link modes on an interface. Per each FEC mode, query if there is a link type which supports it. If so, add this FEC mode to the supported FEC modes list. Prior to this patch, ethtool advertised only the supported FEC modes on the current link type. Add an explicit mapping between internal FEC modes and ethtool link mode bits. With this change, adding new FEC modes in the downstream patch would be easier. Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||||
| 2020-02-18 | net/mlx5e: Enforce setting of a single FEC mode | Aya Levin | 1 | -0/+4 | |
| Ethtool command allow setting of several FEC modes in a single set command. The driver can only set a single FEC mode at a time. With this patch driver will reply not-supported on setting several FEC modes. Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||||
| 2020-02-18 | net/mlx5e: Set FEC to auto when configured mode is not supported | Aya Levin | 1 | -16/+6 | |
| When configuring FEC mode, driver tries to set it for all available link types. If a link type doesn't support a FEC mode, set this link type to auto (FW best effort). Prior to this patch, when a link type didn't support a FEC mode is was set to no FEC. Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||||
| 2020-02-18 | mlx5: Use proper logging and tracing line terminations |   Joe Perches | 3 | -10/+11 | |
| netdev_err should use newline termination but mlx5_health_report is used in a trace output function devlink_health_report where no newline should be used. Remove the newlines from a couple formats and add a format string of "%s\n" to the netdev_err call to not directly output the logging string. Also use snprintf to avoid any possible output string overrun. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||||
| 2020-02-18 | net/mlx5e: Support dump callback in RX reporter | Aya Levin | 1 | -0/+183 | |
| Add support for SQ's FW dump on RX reporter's events. Use Resource dump API to retrieve the relevant data: RX slice, RQ dump, RX buffer and ICOSQ dump (depends on the error). Wrap it in formatted messages and store the binary output in devlink core. Example: $ devlink health dump show pci/0000:00:0b.0 reporter rx RX Slice: data: 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de RQs: RQ: rqn: 1512 data: 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de RQ: rqn: 1517 data: 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de $ devlink health dump show pci/0000:00:0b.0 reporter rx -jp { "RX Slice": { "data":[ 0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,2,1,0,0,0,0,128,0,1,0,0,0,0,173,222] }, "RQs": [ { "RQ": { "index": 1512, "data": [ 0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,2,1,0,0,0,0,128,0,1,0,0,0,0,173,222] } },{ "RQ": { "index": 1517, "data": [ 0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,2,1,0,0,0,0,128,0,1,0,0,0,0,173] } } ] } Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||||
| 2020-02-18 | net/mlx5e: Support dump callback in TX reporter | Aya Levin | 3 | -2/+234 | |
| Add support for SQ's FW dump on TX reporter's events. Use Resource dump API to retrieve the relevant data: SX slice, SQ dump and SQ buffer. Wrap it in formatted messages and store the binary output in devlink core. Example: $ devlink health dump show pci/0000:00:0b.0 reporter tx SX Slice: data: 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 02 01 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 20 40 90 81 88 ff ff 00 00 00 00 00 00 00 00 15 00 15 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 81 ae 41 06 00 ea ff ff SQs: SQ: index: 1511 data: 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 02 01 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 20 40 90 81 88 ff ff 00 00 00 00 00 00 00 00 15 00 15 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 81 ae 41 06 00 ea ff ff SQ: index: 1516 data: 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 02 01 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 20 40 90 81 88 ff ff 00 00 00 00 00 00 00 00 15 00 15 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 81 ae 41 06 00 ea ff ff $ devlink health dump show pci/0000:00:0b.0 reporter tx -jp { "SX Slice": { "data": [ 0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,2,1,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,32,64,144,129,136,255,255,0,0,0,0,0,0,0,0,21,0,21,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,129,174,65,6,0,234,255,255], }, "SQs": [ { "SQ": { "index": 1511, "data": [ 0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,2,1,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,32,64,144,129,136,255,255,0,0,0,0,0,0,0,0,21,0,21,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,129,174,65,6,0,234,255,255] } },{ "SQ": { "index": 1516, "data": [ 0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,2,1,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,32,64,144,129,136,255,255,0,0,0,0,0,0,0,0,21,0,21,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,129,174,65,6,0,234,255,255] } } ] } Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||||
| 2020-02-18 | net/mlx5e: Gather reporters APIs together | Aya Levin | 2 | -70/+70 | |
| Assemble all the API's to ease insertion of dump callbacks in the following patches in the set. Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||||
| 2020-02-18 | net/mlx5: Add support for resource dump | Aya Levin | 4 | -1/+357 | |
| On driver load: - Initialize resource dump data structure and memory access tools (mkey & pd). - Read the resource dump's menu which contains the FW segment identifier. Each record is identified by the segment name (ASCII). During the driver's course of life, users (like reporters) may request dumps per segment. The user should create a command providing the segment identifier (SW enumeration) and command keys. In return, the user receives a command context. In order to receive the dump, the user should supply the command context and a memory (aligned to a PAGE) on which the dump content will be written. Since the dump may be larger than the given memory, the user may resubmit the command until received an indication of end-of-dump. It is the user's responsibility to destroy the command. Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||||
| 2020-02-18 | net/mlx5: DR, Handle reformat capability over sw-steering tables |   Erez Shitrit | 1 | -2/+7 | |
| On flow table creation, send the relevant flags according to what the FW currently supports. When FW doesn't support reformat option over SW-steering managed table, the driver shouldn't pass this. Fixes: 988fd6b32d07 ("net/mlx5: DR, Pass table flags at creation to lower layer") Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||||
| 2020-02-18 | net/mlx5: Fix lowest FDB pool size |   Paul Blakey | 1 | -1/+1 | |
| The pool sizes represent the pool sizes in the fw. when we request a pool size from fw, it will return the next possible group. We track how many pools the fw has left and start requesting groups from the big to the small. When we start request 4k group, which doesn't exists in fw, fw wants to allocate the next possible size, 64k, but will fail since its exhausted. The correct smallest pool size in fw is 128 and not 4k. Fixes: 39ac237ce009 ("net/mlx5: E-Switch, Refactor chains and priorities") Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||||
| 2020-02-18 | net/mlx5e: Don't clear the whole vf config when switching modes |   Dmytro Linkin | 2 | -3/+7 | |
| There is no need to reset all vf config (except link state) between legacy and switchdev modes changes. Also, set link state to AUTO, when legacy enabled. Fixes: 3b83b6c2e024 ("net/mlx5e: Clear VF config when switching modes") Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||||
| 2020-02-18 | net/mlx5: DR, Fix matching on vport gvmi |   Hamdan Igbaria | 1 | -1/+4 | |
| Set vport gvmi in the tag, only when source gvmi is set in the bit mask. Fixes: 26d688e3 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by: Hamdan Igbaria <hamdani@mellanox.com> Reviewed-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||||
| 2020-02-18 | net/mlx5e: Fix crash in recovery flow without devlink reporter | Aya Levin | 1 | -1/+1 | |
| When health reporters are not supported, recovery function is invoked directly, not via devlink health reporters. In this direct flow, the recover function input parameter was passed incorrectly and is causing a kernel oops. This patch is fixing the input parameter. Following call trace is observed on rx error health reporting. Internal error: Oops: 96000007 [#1] PREEMPT SMP Process kworker/u16:4 (pid: 4584, stack limit = 0x00000000c9e45703) Call trace: mlx5e_rx_reporter_err_rq_cqe_recover+0x30/0x164 [mlx5_core] mlx5e_health_report+0x60/0x6c [mlx5_core] mlx5e_reporter_rq_cqe_err+0x6c/0x90 [mlx5_core] mlx5e_rq_err_cqe_work+0x20/0x2c [mlx5_core] process_one_work+0x168/0x3d0 worker_thread+0x58/0x3d0 kthread+0x108/0x134 Fixes: c50de4af1d63 ("net/mlx5e: Generalize tx reporter's functionality") Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||||
| 2020-02-18 | net/mlx5e: Reset RQ doorbell counter before moving RQ state from RST to RDY | Aya Levin | 4 | -9/+43 | |
| Initialize RQ doorbell counters to zero prior to moving an RQ from RST to RDY state. Per HW spec, when RQ is back to RDY state, the descriptor ID on the completion is reset. The doorbell record must comply. Fixes: 8276ea1353a4 ("net/mlx5e: Report and recover from CQE with error on RQ") Signed-off-by: Aya Levin <ayal@mellanox.com> Reported-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||||
| 2020-02-18 | net/mlx5: Fix sleep while atomic in mlx5_eswitch_get_vepa |   Huy Nguyen | 1 | -11/+3 | |
| rtnl_bridge_getlink is protected by rcu lock, so mlx5_eswitch_get_vepa cannot take mutex lock. Two possible issues can happen: 1. User at the same time change vepa mode via RTM_SETLINK command. 2. User at the same time change the switchdev mode via devlink netlink interface. Case 1 cannot happen because rtnl executes one message in order. Case 2 can happen but we do not expect user to change the switchdev mode when changing vepa. Even if a user does it, so he will read a value which is no longer valid. Fixes: 8da202b24913 ("net/mlx5: E-Switch, Add support for VEPA in legacy mode.") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||||
| 2020-02-18 | sfc: elide assignment of skb |   Edward Cree | 1 | -2/+1 | |
| Instead of assigning skb = segments before the loop, just pass segments directly as the first argument to skb_list_walk_safe(). Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-18 | net: fec: Prevent unbind operation |   Fabio Estevam | 1 | -0/+1 | |
| After performing an unbind/bind operation the network is no longer functional on i.MX6 (which has a single FEC instance): # echo 2188000.ethernet > /sys/bus/platform/drivers/fec/unbind # echo 2188000.ethernet > /sys/bus/platform/drivers/fec/bind [ 10.756519] pps pps0: new PPS source ptp0 [ 10.792626] libphy: fec_enet_mii_bus: probed [ 10.799330] fec 2188000.ethernet eth0: registered PHC device 1 # udhcpc -i eth0 udhcpc: started, v1.31.1 [ 14.985211] fec 2188000.ethernet eth0: no PHY, assuming direct connection to switch [ 14.993140] libphy: PHY fixed-0:00 not found [ 14.997643] fec 2188000.ethernet eth0: could not attach to PHY On SoCs with two FEC instances there are some cases where one FEC instance depends on the other one being present. One such example is i.MX28, which has the following FEC dependency as noted in the comments: /* * The i.MX28 dual fec interfaces are not equal. * Here are the differences: * * - fec0 supports MII & RMII modes while fec1 only supports RMII * - fec0 acts as the 1588 time master while fec1 is slave * - external phys can only be configured by fec0 * * That is to say fec1 can not work independently. It only works * when fec0 is working. The reason behind this design is that the * second interface is added primarily for Switch mode. * * Because of the last point above, both phys are attached on fec0 * mdio interface in board design, and need to be configured by * fec0 mii_bus. */ Prevent the unbind operation to avoid these issues. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-18 | qede: Fix race between rdma destroy workqueue and link change event |   Michal Kalderon | 2 | -1/+30 | |
| If an event is added while the rdma workqueue is being destroyed it could lead to several races, list corruption, null pointer dereference during queue_work or init_queue. This fixes the race between the two flows which can occur during shutdown. A kref object and a completion object are added to the rdma_dev structure, these are initialized before the workqueue is created. The refcnt is used to indicate work is being added to the workqueue and ensures the cleanup flow won't start while we're in the middle of adding the event. Once the work is added, the refcnt is decreased and the cleanup flow is safe to run. Fixes: cee9fbd8e2e ("qede: Add qedr framework") Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-17 | net: ena: remove set but not used variable 'hash_key' |   YueHaibing | 1 | -4/+0 | |
| drivers/net/ethernet/amazon/ena/ena_com.c: In function ena_com_hash_key_allocate: drivers/net/ethernet/amazon/ena/ena_com.c:1070:50: warning: variable hash_key set but not used [-Wunused-but-set-variable] commit 6a4f7dc82d1e ("net: ena: rss: do not allocate key when not supported") introduced this, but not used, so remove it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-17 | net: cnic: fix spelling mistake "reserverd" -> "reserved" |   Alexandre Belloni | 1 | -2/+2 | |
| The reserved member should be named reserved3. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-17 | mlxsw: spectrum: Reduce dependency between bridge and router code |   Ido Schimmel | 3 | -20/+2 | |
| Commit f40be47a3e40 ("mlxsw: spectrum_router: Do not force specific configuration order") added a call from the routing code to the bridge code in order to handle the case where VNI should be set on a FID following the joining of the router port to the FID. This is no longer required, as previous patches made VXLAN devices explicitly take a reference on the FID and set VNI on it. Therefore, remove the unnecessary call and simply have the RIF take a reference on the FID without checking if VNI should also be set on it. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-17 | mlxsw: spectrum_switchdev: Remove VXLAN checks during FID membership | Ido Schimmel | 1 | -58/+2 | |
| As explained in previous patch, VXLAN devices now take a reference on the FID and not only local ports. Therefore, there is no need for local ports to check if they need to set a VNI on the FID when they join the FID. Remove these unnecessary checks. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-17 | mlxsw: spectrum_switchdev: Have VXLAN device take reference on FID | Ido Schimmel | 1 | -19/+74 | |
| Up until now only local ports and the router port (which is also a local port) took a reference on the corresponding FID (Filtering Identifier) when joining a bridge. For example: 192.0.2.1/24 br0 | +------+------+ | | swp1 vxlan0 In this case the reference count of the FID will be '2'. Since the VXLAN device does not take a reference on the FID, whenever a local port joins the bridge it needs to check if a VXLAN device is already enslaved. If the VXLAN device should be mapped to the FID in question, then the VXLAN device's VNI is set on the FID. Beside the fact that this scheme special-cases the VXLAN device, it also creates an unnecessary dependency between the routing and bridge code: 1. [R] IP address is added on 'br0', which prompts the creation of a RIF and a backing FID 2. [B] VNI is enabled on backing FID 3. [R] Host route corresponding to VXLAN device's source address is promoted to perform NVE decapsulation [R] - Routing code [B] - Bridge code This back and forth dependency will become problematic when a lock is added in the routing code instead of relying on RTNL, as it will result in an AA deadlock. Instead, have the VXLAN device take a reference on the FID just like all the other netdev members of the bridge. In order to correctly handle the case where VXLAN devices are already enslaved to the bridge when it is offloaded, walk the bridge's slaves and replay the configuration. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-17 | mlxsw: spectrum_switchdev: Propagate extack to bridge creation function | Ido Schimmel | 1 | -7/+12 | |
| Propagate extack to bridge creation function so that error messages could be passed to user space via netlink instead of printing them to kernel log. A subsequent patch will pass the new extack argument to more functions. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-17 | mlxsw: spectrum_fid: Use 'refcount_t' for FID reference counting | Ido Schimmel | 1 | -6/+7 | |
| 'refcount_t' is very useful for catching over/under flows. Convert the FID (Filtering Identifier) objects to use it instead of 'unsigned int' for their reference count. A subsequent patch in the series will change the way VXLAN devices hold / release the FID reference, which is why the conversion is made now. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-17 | sfc: move some ARFS code out of headers | Edward Cree | 2 | -18/+17 | |
| efx_filter_rfs_expire() is a work-function, so it being inline makes no sense. It's only ever used in efx_channels.c, so move it there. While we're at it, clean out some related unused cruft. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-17 | sfc: only schedule asynchronous filter work if needed | Edward Cree | 2 | -2/+8 | |
| Prevent excessive CPU time spent running a workitem with nothing to do. We avoid any races by keeping the same check in efx_filter_rfs_expire(). Suggested-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-17 | net: stmmac: Get rid of custom STMMAC_DEVICE() macro |   Andy Shevchenko | 1 | -19/+14 | |
| Since PCI core provides a generic PCI_DEVICE_DATA() macro, replace STMMAC_DEVICE() with former one. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-17 | net: mscc: fix in frame extraction |   Horatiu Vultur | 1 | -0/+8 | |
| Each extracted frame on Ocelot has an IFH. The frame and IFH are extracted by reading chuncks of 4 bytes from a register. In case the IFH and frames were read corretly it would try to read the next frame. In case there are no more frames in the queue, it checks if there were any previous errors and in that case clear the queue. But this check will always succeed also when there are no errors. Because when extracting the IFH the error is checked against 4(number of bytes read) and then the error is set only if the extraction of the frame failed. So in a happy case where there are no errors the err variable is still 4. So it could be a case where after the check that there are no more frames in the queue, a frame will arrive in the queue but because the error is not reseted, it would try to flush the queue. So the frame will be lost. The fix consist in resetting the error after reading the IFH. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-16 | net: mvneta: get rid of xdp_ret in mvneta_swbm_rx_frame |   Lorenzo Bianconi | 1 | -17/+13 | |
| Get rid of xdp_ret in mvneta_swbm_rx_frame routine since now we can rely on xdp_stats to flush in case of xdp_redirect Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-16 | net: mvneta: introduce xdp counters to ethtool | Lorenzo Bianconi | 1 | -0/+45 | |
| Add xdp_redirect, xdp_pass, xdp_drop and xdp_tx counters to ethtool statistics Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-16 | net: mvneta: rely on struct mvneta_stats in mvneta_update_stats routine | Lorenzo Bianconi | 1 | -32/+41 | |
| Introduce mvneta_stats structure in mvneta_update_stats routine signature in order to collect all the rx stats and update them at the end at the napi loop. mvneta_stats will be reused adding xdp statistics support to ethtool. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-16 | net: mvneta: rely on open-coding updating stats for non-xdp and tx path | Lorenzo Bianconi | 1 | -16/+24 | |
| In oreder to avoid unnecessary instructions rely on open-coding updating per-cpu stats in mvneta_tx/mvneta_xdp_submit_frame and mvneta_rx_hwbm routines. This patch will be used to add xdp support to ethtool for the mvneta driver Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-16 | net: mvneta: move refill_err and skb_alloc_err in per-cpu stats | Lorenzo Bianconi | 1 | -14/+55 | |
| mvneta_ethtool_update_stats routine is currently reporting skb_alloc_error and refill_error only for the first rx queue. Fix the issue moving skb_alloc_err and refill_err in mvneta_pcpu_stats structure. Moreover this patch will be used to introduce xdp statistics to ethtool for the mvneta driver Fixes: 17a96da62716 ("net: mvneta: discriminate error cause for missed packet") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-16 | net: ethernet: dm9000: Handle -EPROBE_DEFER in dm9000_parse_dt() |   Paul Cercueil | 1 | -0/+2 | |
| The call to of_get_mac_address() can return -EPROBE_DEFER, for instance when the MAC address is read from a NVMEM driver that did not probe yet. Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Mathieu Malaterre <malat@debian.org> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-16 | Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue |   David S. Miller | 15 | -198/+385 | |
| Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2020-02-15 This series contains updates to ice driver only. Brett adds support for "Queue in Queue" (QinQ) support, by supporting S-tag & C-tag VLAN traffic by disabling pruning when there are no 0x8100 VLAN interfaces currently on top of the PF. Also refactored the port VLAN configuration to re-use the common code for enabling and disabling a port VLAN in single function. Added a helper function to determine if the VF link is up. Fixed how the port VLAN configures the priority bits for a VF interface. Fixed the port VLAN to only see its own broadcast and multicast traffic. Added support to enable and disable all receive queues, by refactoring adding a new function to do the necessary steps to enable/disable a queue with the necessary read flush. Fixed how we set the mapping mode for transmit and receive queues. Added support for VF queues to handle LAN overflow events. Fixed and refactored how receive queues get disabled for VFs, which was being handled one queue at at time, so improve it to handle when the VF is requesting more than one queue to be disabled. Fixed how the virtchnl_queue_select bitmap is validated. Finally a patch not authored by Brett, Bruce cleans up "fallthrough" comments which are unnecessary. Also replaces the "fallthough" comments with the GCC reserved word fallthrough, along with other GCC compiler fixes. Add missing function header comment regarding a function argument that was missing. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-16 | net/macsonic: Remove interrupt handler wrapper |   Finn Thain | 1 | -15/+4 | |
| On m68k, local irqs remain enabled while interrupt handlers execute. Therefore the macsonic driver has had to disable interrupts to avoid re-entering sonic_interrupt(). As of commit 865ad2f2201d ("net/sonic: Add mutual exclusion for accessing shared state"), sonic_interrupt() became re-entrant, and its wrapper became redundant. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-16 | net/sonic: Start packet transmission immediately | Finn Thain | 1 | -6/+7 | |
| Give the transmit command as soon as the transmit descriptor is ready. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-16 | net/sonic: Remove explicit memory barriers | Finn Thain | 1 | -2/+0 | |
| The explicit memory barriers are redundant now that proper locking and MMIO accessors have been employed. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-16 | net/sonic: Remove redundant netif_start_queue() call | Finn Thain | 1 | -1/+1 | |
| The transmit queue must be running already otherwise sonic_send_packet() would not have been called. If the queue was stopped by the interrupt handler, the interrupt handler will restart it again. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-16 | net/sonic: Remove redundant next_tx variable | Finn Thain | 2 | -5/+4 | |
| The eol_tx variable is the one that matters to the tx algorithm because packets are always placed at the end of the list. The next_tx variable just confuses things so remove it. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-16 | net/sonic: Refactor duplicated code | Finn Thain | 5 | -93/+44 | |
| No functional change. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-16 | net/sonic: Remove obsolete comment | Finn Thain | 1 | -5/+0 | |
| The comment is meaningless since mark_bh() was removed a long time ago. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-16 | sh_eth: use Gigabit register map for R7S72100 |   Sergei Shtylyov | 2 | -68/+1 | |
| The register maps for the Gigabit controllers and the Ether one used on RZ/A1 (AKA R7S72100) are identical except for GECMR which is only present on the true GEther controllers. We no longer use the register map arrays to determine if a given register exists, and have added the GECMR flag to the 'struct sh_eth_cpu_data' in the previous patch, so we're ready to drop the R7S72100 specific register map -- this saves 216 bytes of object code (ARM gcc 4.8.5). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2020-02-16 | sh_eth: add sh_eth_cpu_data::gecmr flag | Sergei Shtylyov | 2 | -1/+14 | |
| Not all Ether controllers having the Gigabit register layout have GECMR -- RZ/A1 (AKA R7S72100) actually has the same layout but no Gigabit speed support and hence no GECMR. In the past, the new register map table was added for this SoC, now I think we should have used the existing Gigabit table with the differences (such as GECMR) covered by the mere flags in the 'struct sh_eth_cpu_data'. Add such flag for GECMR -- and then we can get rid of the R7S72100 specific layout in the next patch... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
 |
index : linux-dev | |
| Linux kernel development work - see feature branches | Jason A. Donenfeld |
| aboutsummaryrefslogtreecommitdiffstats |