aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2020-01-06Revert "net/mlx5: Support lockless FTE read lookups"Parav Pandit2-56/+15
This reverts commit 7dee607ed0e04500459db53001d8e02f8831f084. During cleanup path, FTE's parent node group is removed which is referenced by the FTE while freeing the FTE. Hence FTE's lockless read lookup optimization done in cited commit is not possible at the moment. Hence, revert the commit. This avoid below KAZAN call trace. [ 110.390896] BUG: KASAN: use-after-free in find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391048] Read of size 4 at addr ffff888c19e6d220 by task swapper/12/0 [ 110.391219] CPU: 12 PID: 0 Comm: swapper/12 Not tainted 5.5.0-rc1+ [ 110.391222] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/02/2014 [ 110.391225] Call Trace: [ 110.391229] <IRQ> [ 110.391246] dump_stack+0x95/0xd5 [ 110.391307] ? find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391320] print_address_description.constprop.5+0x20/0x320 [ 110.391379] ? find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391435] ? find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391441] __kasan_report+0x149/0x18c [ 110.391499] ? find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391504] kasan_report+0x12/0x20 [ 110.391511] __asan_report_load4_noabort+0x14/0x20 [ 110.391567] find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391625] del_sw_fte_rcu+0x4a/0x100 [mlx5_core] [ 110.391633] rcu_core+0x404/0x1950 [ 110.391640] ? rcu_accelerate_cbs_unlocked+0x100/0x100 [ 110.391649] ? run_rebalance_domains+0x201/0x280 [ 110.391654] rcu_core_si+0xe/0x10 [ 110.391661] __do_softirq+0x181/0x66c [ 110.391670] irq_exit+0x12c/0x150 [ 110.391675] smp_apic_timer_interrupt+0xf0/0x370 [ 110.391681] apic_timer_interrupt+0xf/0x20 [ 110.391684] </IRQ> [ 110.391695] RIP: 0010:cpuidle_enter_state+0xfa/0xba0 [ 110.391703] Code: 3d c3 9b b5 50 e8 56 75 6e fe 48 89 45 c8 0f 1f 44 00 00 31 ff e8 a6 94 6e fe 45 84 ff 0f 85 f6 02 00 00 fb 66 0f 1f 44 00 00 <45> 85 f6 0f 88 db 06 00 00 4d 63 fe 4b 8d 04 7f 49 8d 04 87 49 8d [ 110.391706] RSP: 0018:ffff888c23a6fce8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 [ 110.391712] RAX: dffffc0000000000 RBX: ffffe8ffff7002f8 RCX: 000000000000001f [ 110.391715] RDX: 1ffff11184ee6cb5 RSI: 0000000040277d83 RDI: ffff888c277365a8 [ 110.391718] RBP: ffff888c23a6fd40 R08: 0000000000000002 R09: 0000000000035280 [ 110.391721] R10: ffff888c23a6fc80 R11: ffffed11847485d0 R12: ffffffffb1017740 [ 110.391723] R13: 0000000000000003 R14: 0000000000000003 R15: 0000000000000000 [ 110.391732] ? cpuidle_enter_state+0xea/0xba0 [ 110.391738] cpuidle_enter+0x4f/0xa0 [ 110.391747] call_cpuidle+0x6d/0xc0 [ 110.391752] do_idle+0x360/0x430 [ 110.391758] ? arch_cpu_idle_exit+0x40/0x40 [ 110.391765] ? complete+0x67/0x80 [ 110.391771] cpu_startup_entry+0x1d/0x20 [ 110.391779] start_secondary+0x2f3/0x3c0 [ 110.391784] ? set_cpu_sibling_map+0x2500/0x2500 [ 110.391795] secondary_startup_64+0xa4/0xb0 [ 110.391841] Allocated by task 290: [ 110.391917] save_stack+0x21/0x90 [ 110.391921] __kasan_kmalloc.constprop.8+0xa7/0xd0 [ 110.391925] kasan_kmalloc+0x9/0x10 [ 110.391929] kmem_cache_alloc_trace+0xf6/0x270 [ 110.391987] create_root_ns.isra.36+0x58/0x260 [mlx5_core] [ 110.392044] mlx5_init_fs+0x5fd/0x1ee0 [mlx5_core] [ 110.392092] mlx5_load_one+0xc7a/0x3860 [mlx5_core] [ 110.392139] init_one+0x6ff/0xf90 [mlx5_core] [ 110.392145] local_pci_probe+0xde/0x190 [ 110.392150] work_for_cpu_fn+0x56/0xa0 [ 110.392153] process_one_work+0x678/0x1140 [ 110.392157] worker_thread+0x573/0xba0 [ 110.392162] kthread+0x341/0x400 [ 110.392166] ret_from_fork+0x1f/0x40 [ 110.392218] Freed by task 2742: [ 110.392288] save_stack+0x21/0x90 [ 110.392292] __kasan_slab_free+0x137/0x190 [ 110.392296] kasan_slab_free+0xe/0x10 [ 110.392299] kfree+0x94/0x250 [ 110.392357] tree_put_node+0x257/0x360 [mlx5_core] [ 110.392413] tree_remove_node+0x63/0xb0 [mlx5_core] [ 110.392469] clean_tree+0x199/0x240 [mlx5_core] [ 110.392525] mlx5_cleanup_fs+0x76/0x580 [mlx5_core] [ 110.392572] mlx5_unload+0x22/0xc0 [mlx5_core] [ 110.392619] mlx5_unload_one+0x99/0x260 [mlx5_core] [ 110.392666] remove_one+0x61/0x160 [mlx5_core] [ 110.392671] pci_device_remove+0x10b/0x2c0 [ 110.392677] device_release_driver_internal+0x1e4/0x490 [ 110.392681] device_driver_detach+0x36/0x40 [ 110.392685] unbind_store+0x147/0x200 [ 110.392688] drv_attr_store+0x6f/0xb0 [ 110.392693] sysfs_kf_write+0x127/0x1d0 [ 110.392697] kernfs_fop_write+0x296/0x420 [ 110.392702] __vfs_write+0x66/0x110 [ 110.392707] vfs_write+0x1a0/0x500 [ 110.392711] ksys_write+0x164/0x250 [ 110.392715] __x64_sys_write+0x73/0xb0 [ 110.392720] do_syscall_64+0x9f/0x3a0 [ 110.392725] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 7dee607ed0e0 ("net/mlx5: Support lockless FTE read lookups") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-06net/mlx5: Move devlink registration before interfaces loadMichael Guralnik1-7/+9
Register devlink before interfaces are added. This will allow interfaces to use devlink while initalizing. For example, call mlx5_is_roce_enabled. Fixes: aba25279c100 ("net/mlx5e: Add TX reporter support") Signed-off-by: Michael Guralnik <michaelgur@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-06net/mlx5e: Always print health reporter message to dmesgEran Ben Elisha1-3/+4
In case a reporter exists, error message is logged only to the devlink tracer. The devlink tracer is a visibility utility only, which user can choose not to monitor. After cited patch, 3rd party monitoring tools that tracks these error message will no longer find them in dmesg, causing a regression. With this patch, error messages are also logged into the dmesg. Fixes: c50de4af1d63 ("net/mlx5e: Generalize tx reporter's functionality") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-06net/mlx5e: Avoid duplicating rule destinationsDmytro Linkin1-1/+57
Following scenario easily break driver logic and crash the kernel: 1. Add rule with mirred actions to same device. 2. Delete this rule. In described scenario rule is not added to database and on deletion driver access invalid entry. Example: $ tc filter add dev ens1f0_0 ingress protocol ip prio 1 \ flower skip_sw \ action mirred egress mirror dev ens1f0_1 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter del dev ens1f0_0 ingress protocol ip prio 1 Dmesg output: [ 376.634396] mlx5_core 0000:82:00.0: mlx5_cmd_check:756:(pid 3439): DESTROY_FLOW_GROUP(0x934) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x563e2f) [ 376.654983] mlx5_core 0000:82:00.0: del_hw_flow_group:567:(pid 3439): flow steering can't destroy fg 89 of ft 3145728 [ 376.673433] kasan: CONFIG_KASAN_INLINE enabled [ 376.683769] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 376.695229] general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI [ 376.705069] CPU: 7 PID: 3439 Comm: tc Not tainted 5.4.0-rc5+ #76 [ 376.714959] Hardware name: Supermicro SYS-2028TP-DECTR/X10DRT-PT, BIOS 2.0a 08/12/2016 [ 376.726371] RIP: 0010:mlx5_del_flow_rules+0x105/0x960 [mlx5_core] [ 376.735817] Code: 01 00 00 00 48 83 eb 08 e8 28 d9 ff ff 4c 39 e3 75 d8 4c 8d bd c0 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 84 04 00 00 48 8d 7d 28 8b 9 d [ 376.761261] RSP: 0018:ffff888847c56db8 EFLAGS: 00010202 [ 376.770054] RAX: dffffc0000000000 RBX: ffff8888582a6da0 RCX: ffff888847c56d60 [ 376.780743] RDX: 0000000000000058 RSI: 0000000000000008 RDI: 0000000000000282 [ 376.791328] RBP: 0000000000000000 R08: fffffbfff0c60ea6 R09: fffffbfff0c60ea6 [ 376.802050] R10: fffffbfff0c60ea5 R11: ffffffff8630752f R12: ffff8888582a6da0 [ 376.812798] R13: dffffc0000000000 R14: ffff8888582a6da0 R15: 00000000000002c0 [ 376.823445] FS: 00007f675f9a8840(0000) GS:ffff88886d200000(0000) knlGS:0000000000000000 [ 376.834971] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 376.844179] CR2: 00000000007d9640 CR3: 00000007d3f26003 CR4: 00000000001606e0 [ 376.854843] Call Trace: [ 376.868542] __mlx5_eswitch_del_rule+0x49/0x300 [mlx5_core] [ 376.877735] mlx5e_tc_del_fdb_flow+0x6ec/0x9e0 [mlx5_core] [ 376.921549] mlx5e_flow_put+0x2b/0x50 [mlx5_core] [ 376.929813] mlx5e_delete_flower+0x5b6/0xbd0 [mlx5_core] [ 376.973030] tc_setup_cb_reoffload+0x29/0xc0 [ 376.980619] fl_reoffload+0x50a/0x770 [cls_flower] [ 377.015087] tcf_block_playback_offloads+0xbd/0x250 [ 377.033400] tcf_block_setup+0x1b2/0xc60 [ 377.057247] tcf_block_offload_cmd+0x195/0x240 [ 377.098826] tcf_block_offload_unbind+0xe7/0x180 [ 377.107056] __tcf_block_put+0xe5/0x400 [ 377.114528] ingress_destroy+0x3d/0x60 [sch_ingress] [ 377.122894] qdisc_destroy+0xf1/0x5a0 [ 377.129993] qdisc_graft+0xa3d/0xe50 [ 377.151227] tc_get_qdisc+0x48e/0xa20 [ 377.165167] rtnetlink_rcv_msg+0x35d/0x8d0 [ 377.199528] netlink_rcv_skb+0x11e/0x340 [ 377.219638] netlink_unicast+0x408/0x5b0 [ 377.239913] netlink_sendmsg+0x71b/0xb30 [ 377.267505] sock_sendmsg+0xb1/0xf0 [ 377.273801] ___sys_sendmsg+0x635/0x900 [ 377.312784] __sys_sendmsg+0xd3/0x170 [ 377.338693] do_syscall_64+0x95/0x460 [ 377.344833] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 377.352321] RIP: 0033:0x7f675e58e090 To avoid this, for every mirred action check if output device was already processed. If so - drop rule with EOPNOTSUPP error. Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-06igc: Use Start of Packet signal from PHY for timestampingVinicius Costa Gomes2-1/+6
For better accuracy, i225 is able to do timestamping using the Start of Packet signal from the PHY. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-06igc: Add support for ethtool GET_TS_INFO commandVinicius Costa Gomes1-0/+34
This command allows igc to report what types of timestamping are supported. ptp4l uses this to detect if the hardware supports timestamping. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-06igc: Add support for TX timestampingVinicius Costa Gomes4-0/+158
This adds support for timestamping packets being transmitted. Based on the code from i210. The basic differences is that i225 has 4 registers to store the transmit timestamps (i210 has one). Right now, we only support retrieving from one register, support for using the other registers will be added later. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-06igc: Add support for RX timestampingVinicius Costa Gomes5-0/+340
This adds support for timestamping received packets. It is based on the i210, as many features of i225 work the same way. The main difference from i210 is that i225 has support for choosing the timer register to use when timestamping packets. Right now, we only support using timer 0. The other difference is that i225 stores two timestamps in the receive descriptor, right now, we only retrieve one. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-06net: atlantic: remove duplicate entriesIgor Russkikh1-3/+0
Function entries were duplicated accidentally, removing the dups. Fixes: ea4b4d7fc106 ("net: atlantic: loopback tests via private flags") Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: atlantic: loopback configuration in improper placeIgor Russkikh1-2/+2
Initial loopback configuration should be called earlier, before starting traffic on HW blocks. Otherwise depending on race conditions it could be kept disabled. Fixes: ea4b4d7fc106 ("net: atlantic: loopback tests via private flags") Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: atlantic: broken link status on old fwIgor Russkikh1-3/+1
Last code/checkpatch cleanup did a copy paste error where code from firmware 3 API logic was moved to firmware 1 logic. This resulted in FW1.x users would never see the link state as active. Fixes: 7b0c342f1f67 ("net: atlantic: code style cleanup") Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06epic100: allow nesting of ethtool_ops begin() and complete()Michal Kubecek1-2/+5
Unlike most networking drivers using begin() and complete() ethtool_ops callbacks to resume a device which is down and suspend it again when done, epic100 does not use standard refcounted infrastructure but sets device sleep state directly. With the introduction of netlink ethtool interface, we may have nested begin-complete blocks so that inner complete() would put the device back to sleep for the rest of the outer block. To avoid rewriting an old and not very actively developed driver, just add a nesting counter and only perform resume and suspend on the outermost level. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06via-velocity: allow nesting of ethtool_ops begin() and complete()Michal Kubecek2-4/+11
Unlike most networking drivers using begin() and complete() ethtool_ops callbacks to resume a device which is down and suspend it again when done, via-velocity does not use standard refcounted infrastructure but sets device sleep state directly. With the introduction of netlink ethtool interface, we may have nested begin-complete blocks so that inner complete() would put the device back to sleep for the rest of the outer block. To avoid rewriting an old and not very actively developed driver, just add a nesting counter and only perform resume and suspend on the outermost level. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06mlxsw: spectrum: Disable DIP_LINK_LOCAL check in hardware pipelineAmit Cohen2-0/+3
The check drops packets if they need to be routed and their destination IP is link-local, i.e., belongs to 169.254.0.0/16 address range. Disable the check since the kernel forwards such packets and does not drop them. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06mlxsw: spectrum: Disable SIP_DIP check in hardware pipelineAmit Cohen2-0/+3
The check drops packets if they need to be routed and their source IP equals to their destination IP. Disable the check since the kernel forwards such packets and does not drop them. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06mlxsw: spectrum: Disable MC_DMAC check in hardware pipelineAmit Cohen2-0/+3
The check drops packets if they need to be routed and their multicast MAC mismatched to their multicast destination IP. For IPV4: DMAC is mismatched if it is different from {01-00-5E-0 (25 bits), DIP[22:0]} For IPV6: DMAC is mismatched if it is different from {33-33-0 (16 bits), DIP[31:0]} Disable the check since the kernel forwards such packets and does not drop them. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06mlxsw: spectrum: Disable SIP_CLASS_E check in hardware pipelineAmit Cohen2-0/+3
The check drops packets if they need to be routed and their source IP is from class E, i.e., belongs to 240.0.0.0/4 address range, but different from 255.255.255.255. Disable the check since the kernel forwards such packets and does not drop them. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: ethernet: sxgbe: Rename Samsung to lowercaseKrzysztof Kozlowski1-1/+1
Fix up inconsistent usage of upper and lowercase letters in "Samsung" name. "SAMSUNG" is not an abbreviation but a regular trademarked name. Therefore it should be written with lowercase letters starting with capital letter. Although advertisement materials usually use uppercase "SAMSUNG", the lowercase version is used in all legal aspects (e.g. on Wikipedia and in privacy/legal statements on https://www.samsung.com/semiconductor/privacy-global/). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06igc: Add basic skeleton for PTPVinicius Costa Gomes6-1/+439
This allows the creation of the /dev/ptpX device for i225, and reading and writing the time. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-06net: hns3: modify an unsuitable reset level for hardware errorHuazhong Tan1-2/+2
According to hardware user manual, when hardware reports error 'roc_pkt_without_key_port', the driver should assert function reset to do the recovery. So this patch uses HNAE3_FUNC_RESET to replace HNAE3_GLOBAL_RESET. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: hns3: replace an unsuitable variable type in hclge_inform_reset_assert_to_vf()Huazhong Tan2-1/+4
In hclge_inform_reset_assert_to_vf(), variable reset_type(enum type) will be copied into msg_data whose size is 2 bytes. Currently, hip08 is a little-endian machine, so the lower two bytes of reset_type will be copied to msg_data. But when running on a big-endian machine, msg_data will have a wrong value(the higher two bytes of reset_type). So this patch modifies the type of reset_type to u16, and adds a build check in case enum hnae3_reset_type has value larger than U16_MAX. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: hns3: add protection when get SFP speed as 0Guojia Liao1-0/+6
In some case, the MAC speed get from hardware maybe 0, it should not be set to mac->speed. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: hns3: modify the IRQ name of misc vectorsYonglong Liu5-4/+10
The misc IRQ of all the devices have the same name, so it's hard to find the right misc IRQ of the device. This patch modifies the misc IRQ names as "hclge/hclgevf"-misc- "pci name". And now the IRQ name is not related to net device name anymore, so change the HNAE3_INT_NAME_LEN to 32 bytes, and that is enough. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: hns3: modify an unsuitable log in hclge_map_ring_to_vector()Yonglong Liu1-1/+1
When the returned vector_id less than 0, the message should print out the vector who is getting vector index fail. So this patch replaces vector_id with vector, and re-format the message. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: hns3: modify the IRQ name of TQP vectorYonglong Liu1-9/+12
When rename the net devices, the IRQ number can not be fetched by the net device name, because the driver request the IRQ resources only when the vector resource changed, and the rename operation did not change the vector resources, so the IRQ name keeps the previous net device name. So this patch modifies the name of the TQP IRQ as "pci driver name"-"pci name"-"TxRx"-"index". Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: hns3: re-organize vector handleYonglong Liu1-48/+52
To prevent loss user's IRQ affinity configuration when DOWN, this patch moves out release/request operation of the vector handle from net DOWN/UP, just do it when vector resource changes. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: hns3: add trace event support for HNS3 driverYunsheng Lin4-2/+172
This adds trace support for HNS3 driver. It also declares some events which could be used to trace the events when a TX/RX BD is processed, and other events which are related to the processing of sk_buff, such as TSO, GRO. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig25-40/+39
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2020-01-05net: mscc: ocelot: export ANA, DEV and QSYS registers to include/soc/msccVladimir Oltean4-1173/+3
Since the Felix DSA driver is implementing its own PHYLINK instance due to SoC differences, it needs access to the few registers that are common, mainly for flow control. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-05net: mscc: ocelot: make phy_mode a member of the common struct ocelot_portVladimir Oltean3-6/+6
The Ocelot switchdev driver and the Felix DSA one need it for different reasons. Felix (or at least the VSC9959 instantiation in NXP LS1028A) is integrated with the traditional NXP Layerscape PCS design which does not support runtime configuration of SerDes protocol. So it needs to pre-validate the phy-mode from the device tree and prevent PHYLINK from attempting to change it. For this, it needs to cache it in a private variable. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-05enetc: Set MDIO_CFG_HOLD to the recommended value of 2Vladimir Oltean1-4/+8
This increases the MDIO hold time to 5 enet_clk cycles from the previous value of 0. This is actually the out-of-reset value, that the driver was previously overwriting with 0. Zero worked for the external MDIO, but breaks communication with the internal MDIO buses on which the PCS of ENETC SI's and Felix switch are found. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-05enetc: Make MDIO accessors more generic and export to include/linux/fslClaudiu Manoil8-99/+121
Within the LS1028A SoC, the register map for the ENETC MDIO controller is instantiated a few times: for the central (external) MDIO controller, for the internal bus of each standalone ENETC port, and for the internal bus of the Felix switch. Refactoring is needed to support multiple MDIO buses from multiple drivers. The enetc_hw structure is made an opaque type and a smaller enetc_mdio_priv is created. 'mdio_base' - MDIO registers base address - is being parameterized, to be able to work with different MDIO register bases. The ENETC MDIO bus operations are exported from the fsl-enetc-mdio kernel object, the same that registers the central MDIO controller (the dedicated PF). The ENETC main driver has been changed to select it, and use its exported helpers to further register its private MDIO bus. The DSA Felix driver will do the same. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-05macb: Don't unregister clks unconditionallyStephen Boyd1-3/+1
The only clk init function in this driver that register a clk is fu540_c000_clk_init(), and thus we need to unregister the clk when this driver is removed on that platform. Other init functions, for example macb_clk_init(), don't register clks and therefore we shouldn't unregister the clks when this driver is removed. Convert this registration path to devm so it gets auto-unregistered when this driver is removed and drop the clk_unregister() calls in driver remove (and error paths) so that we don't erroneously remove a clk from the system that isn't registered by this driver. Otherwise we get strange crashes with a use-after-free when the devm_clk_get() call in macb_clk_init() calls clk_put() on a clk pointer that has become invalid because it is freed in clk_unregister(). Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Yash Shah <yash.shah@sifive.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Fixes: c218ad559020 ("macb: Add support for SiFive FU540-C000") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-05net: switch to using PHY_INTERFACE_MODE_10GBASER rather than 10GKRRussell King1-5/+14
Switch network drivers, phy drivers, and SFP/phylink over to use the more correct 10GBASE-R, rather than 10GBASE-KR. 10GBASE-KR is backplane ethernet, which is 10GBASE-R with autonegotiation on top, which our current usage on the affected platforms does not have. The only remaining user of PHY_INTERFACE_MODE_10GKR is the Aquantia PHY, which has a separate mode for 10GBASE-KR. For Marvell mvpp2, we detect 10GBASE-KR, and rewrite it to 10GBASE-R for compatibility with existing DT - this is the only network driver at present that makes use of PHY_INTERFACE_MODE_10GKR. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-05ionic: support sr-iov operationsShannon Nelson6-8/+438
Add the netdev ops for managing VFs. Since most of the management work happens in the NIC firmware, the driver becomes mostly a pass-through for the network stack commands that want to control and configure the VFs. We also tweak ionic_station_set() a little to allow for the VFs that start off with a zero'd mac address. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-05ionic: ionic_if bits for sr-iov supportShannon Nelson1-0/+97
Adds new AdminQ calls and their related structs for supporting PF controls on VFs: CMD_OPCODE_VF_GETATTR CMD_OPCODE_VF_SETATTR Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-05net: ethernet: sxgbe: Rename Samsung to lowercaseKrzysztof Kozlowski1-1/+1
Fix up inconsistent usage of upper and lowercase letters in "Samsung" name. "SAMSUNG" is not an abbreviation but a regular trademarked name. Therefore it should be written with lowercase letters starting with capital letter. Although advertisement materials usually use uppercase "SAMSUNG", the lowercase version is used in all legal aspects (e.g. on Wikipedia and in privacy/legal statements on https://www.samsung.com/semiconductor/privacy-global/). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-05drivers/net/b44: Change to non-atomic bit operations on pwol_maskFenghua Yu1-3/+6
Atomic operations that span cache lines are super-expensive on x86 (not just to the current processor, but also to other processes as all memory operations are blocked until the operation completes). Upcoming x86 processors have a switch to cause such operations to generate a #AC trap. It is expected that some real time systems will enable this mode in BIOS. In preparation for this, it is necessary to fix code that may execute atomic instructions with operands that cross cachelines because the #AC trap will crash the kernel. Since "pwol_mask" is local and never exposed to concurrency, there is no need to set bits in pwol_mask using atomic operations. Directly operate on the byte which contains the bit instead of using __set_bit() to avoid any big endian concern due to type cast to unsigned long in __set_bit(). Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-04igc: Remove no need declaration of the igc_sw_initSasha Neftin1-743/+740
We want to avoid forward-declarations of function if possible. Rearrange the igc_sw_init function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_write_itrSasha Neftin1-17/+16
We want to avoid forward-declarations of function if possible. Rearrange the igc_write_itr function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_assign_vectorSasha Neftin1-62/+61
We want to avoid forward-declarations of function if possible. Rearrange the igc_assign_vector function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_free_q_vectorSasha Neftin1-21/+20
We want to avoid forward-declarations of function if possible. Rearrange the igc_free_q_vector function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_free_q_vectorsSasha Neftin1-14/+13
We want to avoid forward-declarations of function if possible. Rearrange the igc_free_q_vectors function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_irq_disableSasha Neftin1-34/+33
We want to avoid forward-declarations of function if possible. Rearrange the igc_irq_disable function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_irq_enableSasha Neftin1-24/+23
We want to avoid forward-declarations of function if possible. Rearrange the igc_irq_enable function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_configure_msixSasha Neftin1-45/+44
We want to avoid forward-declarations of function if possible. Rearrange the igc_configure_msix function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_set_rx_modeSasha Neftin1-177/+176
We want to avoid forward-declarations of function if possible. Rearrange the igc_set_rx_mode function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_set_interrupt_capabilitySasha Neftin1-72/+70
We want to avoid forward-declarations of function if possible. Rearrange the igc_set_interrupt_capability function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_alloc_mapped_pageSasha Neftin1-48/+46
We want to avoid forward-declarations of function if possible. Rearrange the igc_alloc_mapped_page function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_configureSasha Neftin1-46/+45
We want to avoid forward-declarations of function if possible. Rearrange the igc_configure function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.