| Age | Commit message (Collapse) | Author | Files | Lines | |
|---|---|---|---|---|---|
| 2019-12-16 | net: hns3: remove mailbox and reset work in hclge_main |   Yunsheng Lin | 4 | -73/+118 | |
| There are three work (mbx_service_task, service_task, rst_service_task) in the HNS3 driver, mbx_service_task is for handling mailbox work, service_task is for periodic management issue and rst_service_task is for reset related issue, which can be handled in a single work. This patch removes the mbx_service_task and rst_service_task work, and moves the related handling to the service_task work in order to remove concurrency between the three work and to improve efficiency. BTW, since stats_timer in struct hclge_hw_stats is not needed anymore, so removes the definition of struct hclge_hw_stats, and moves mac_stats into struct hclge_dev. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-16 | net: hns3: schedule hclgevf_service by using delayed workqueue | Yunsheng Lin | 2 | -27/+15 | |
| Currently, a timer is defined to schedule hclgevf_service per second. To simplify the code, this patch uses the delayed work instead of timer to schedule hclgevf_serive. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-16 | r8169: check that Realtek PHY driver module is loaded |   Heiner Kallweit | 1 | -0/+9 | |
| Some users complained about problems with r8169 and it turned out that the generic PHY driver was used instead instead of the dedicated one. In all cases reason was that r8169.ko was in initramfs, but realtek.ko not. Manually adding realtek.ko to initramfs fixed the issues. Root cause seems to be that tools like dracut and genkernel don't consider softdeps. Add a check for loaded Realtek PHY driver module and provide the user with a hint if it's not loaded. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-16 | dpaa2-ptp: add external trigger event support |   Yangbo Lu | 3 | -1/+25 | |
| This patch is to add external trigger event support for dpaa2-ptp driver with v2 dprtc_set_irq_mask() API. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-15 | cxgb4: Fix kernel panic while accessing sge_info |   Vishal Kulkarni | 1 | -0/+4 | |
| The sge_info debugfs collects offload queue info even when offload capability is disabled and leads to panic. [ 144.139871] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 144.139874] CR2: 0000000000000000 CR3: 000000082d456005 CR4: 00000000001606e0 [ 144.139876] Call Trace: [ 144.139887] sge_queue_start+0x12/0x30 [cxgb4] [ 144.139897] seq_read+0x1d4/0x3d0 [ 144.139906] full_proxy_read+0x50/0x70 [ 144.139913] vfs_read+0x89/0x140 [ 144.139916] ksys_read+0x55/0xd0 [ 144.139924] do_syscall_64+0x5b/0x1d0 [ 144.139933] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 144.139936] RIP: 0033:0x7f4b01493990 Fix this crash by skipping the offload queue access in sge_qinfo when offload capability is disabled Signed-off-by: Herat Ramani <herat@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> | |||||
| 2019-12-14 | bnx2x: Fix logic to get total no. of PFs per engine |   Manish Chopra | 1 | -1/+1 | |
| Driver doesn't calculate total number of PFs configured on a given engine correctly which messed up resources in the PFs loaded on that engine, leading driver to exceed configuration of resources (like vlan filters etc.) beyond the limit per engine, which ended up with asserts from the firmware. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> | |||||
| 2019-12-14 | bnx2x: Do not handle requests from VFs after parity | Manish Chopra | 3 | -2/+23 | |
| Parity error from the hardware will cause PF to lose the state of their VFs due to PF's internal reload and hardware reset following the parity error. Restrict any configuration request from the VFs after the parity as it could cause unexpected hardware behavior, only way for VFs to recover would be to trigger FLR on VFs and reload them. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> | |||||
| 2019-12-14 | net: ethernet: ti: build cpsw-common for switchdev |   Arnd Bergmann | 1 | -0/+1 | |
| Without the common part of the driver, the new file fails to link: drivers/net/ethernet/ti/cpsw_new.o: In function `cpsw_probe': cpsw_new.c:(.text+0x312c): undefined reference to `ti_cm_get_macid' Use the same Makefile hack as before, and build cpsw-common.o for any driver that needs it. Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> | |||||
| 2019-12-14 | net: ethernet: ti: select PAGE_POOL for switchdev driver | Arnd Bergmann | 1 | -0/+1 | |
| The new driver misses a dependency: drivers/net/ethernet/ti/cpsw_new.o: In function `cpsw_rx_handler': cpsw_new.c:(.text+0x259c): undefined reference to `__page_pool_put_page' cpsw_new.c:(.text+0x25d0): undefined reference to `page_pool_alloc_pages' drivers/net/ethernet/ti/cpsw_priv.o: In function `cpsw_fill_rx_channels': cpsw_priv.c:(.text+0x22d8): undefined reference to `page_pool_alloc_pages' cpsw_priv.c:(.text+0x2420): undefined reference to `__page_pool_put_page' drivers/net/ethernet/ti/cpsw_priv.o: In function `cpsw_create_xdp_rxqs': cpsw_priv.c:(.text+0x2624): undefined reference to `page_pool_create' drivers/net/ethernet/ti/cpsw_priv.o: In function `cpsw_run_xdp': cpsw_priv.c:(.text+0x2dc8): undefined reference to `__page_pool_put_page' Other drivers use 'select' for PAGE_POOL, so do the same here. Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> | |||||
| 2019-12-14 | net: marvell: mvpp2: phylink requires the link interrupt |   Russell King | 1 | -1/+1 | |
| phylink requires the MAC to report when its link status changes when operating in inband modes. Failure to report link status changes means that phylink has no idea when the link events happen, which results in either the network interface's carrier remaining up or remaining permanently down. For example, with a fiber module, if the interface is brought up and link is initially established, taking the link down at the far end will cut the optical power. The SFP module's LOS asserts, we deactivate the link, and the network interface reports no carrier. When the far end is brought back up, the SFP module's LOS deasserts, but the MAC may be slower to establish link. If this happens (which in my tests is a certainty) then phylink never hears that the MAC has established link with the far end, and the network interface is stuck reporting no carrier. This means the interface is non-functional. Avoiding the link interrupt when we have phylink is basically not an option, so remove the !port->phylink from the test. Fixes: 4bb043262878 ("net: mvpp2: phylink support") Tested-by: Sven Auhagen <sven.auhagen@voleatech.de> Tested-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> | |||||
| 2019-12-13 | Revert "nfp: abm: fix memory leak in nfp_abm_u32_knode_replace" |   Jakub Kicinski | 1 | -10/+4 | |
| This reverts commit 78beef629fd9 ("nfp: abm: fix memory leak in nfp_abm_u32_knode_replace"). The quoted commit does not fix anything and resulted in a bogus CVE-2019-19076. If match is NULL then it is known there is no matching entry in list, hence, calling nfp_abm_u32_knode_delete() is pointless. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> | |||||
| 2019-12-13 | net/ibmvnic: Fix typo in retry check |   Thomas Falcon | 1 | -1/+1 | |
| This conditional is missing a bang, with the intent being to break when the retry count reaches zero. Fixes: 476d96ca9cc5 ("ibmvnic: Bound waits for device queries") Suggested-by: Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> | |||||
| 2019-12-13 | bnxt: apply computed clamp value for coalece parameter |   Jonathan Lemon | 1 | -1/+1 | |
| After executing "ethtool -C eth0 rx-usecs-irq 0", the box becomes unresponsive, likely due to interrupt livelock. It appears that a minimum clamp value for the irq timer is computed, but is never applied. Fix by applying the corrected clamp value. Fixes: 74706afa712d ("bnxt_en: Update interrupt coalescing logic.") Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> | |||||
| 2019-12-12 | netronome: use the new txqueue timeout argument |   Michael S. Tsirkin | 1 | -7/+1 | |
| Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-12 | mlx4: use new txqueue timeout argument | Michael S. Tsirkin | 1 | -10/+4 | |
| Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-12 | netdev: pass the stuck queue to the timeout handler | Michael S. Tsirkin | 180 | -232/+234 | |
| This allows incrementing the correct timeout statistic without any mess. Down the road, devices can learn to reset just the specific queue. The patch was generated with the following script: use strict; use warnings; our $^I = '.bak'; my @work = ( ["arch/m68k/emu/nfeth.c", "nfeth_tx_timeout"], ["arch/um/drivers/net_kern.c", "uml_net_tx_timeout"], ["arch/um/drivers/vector_kern.c", "vector_net_tx_timeout"], ["arch/xtensa/platforms/iss/network.c", "iss_net_tx_timeout"], ["drivers/char/pcmcia/synclink_cs.c", "hdlcdev_tx_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/message/fusion/mptlan.c", "mpt_lan_tx_timeout"], ["drivers/misc/sgi-xp/xpnet.c", "xpnet_dev_tx_timeout"], ["drivers/net/appletalk/cops.c", "cops_timeout"], ["drivers/net/arcnet/arcdevice.h", "arcnet_timeout"], ["drivers/net/arcnet/arcnet.c", "arcnet_timeout"], ["drivers/net/arcnet/com20020.c", "arcnet_timeout"], ["drivers/net/ethernet/3com/3c509.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c515.c", "corkscrew_timeout"], ["drivers/net/ethernet/3com/3c574_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c589_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/typhoon.c", "typhoon_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "eip_tx_timeout"], ["drivers/net/ethernet/8390/8390.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390p.c", "eip_tx_timeout"], ["drivers/net/ethernet/8390/ax88796.c", "ax_ei_tx_timeout"], ["drivers/net/ethernet/8390/axnet_cs.c", "axnet_tx_timeout"], ["drivers/net/ethernet/8390/etherh.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/hydra.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mac8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mcf8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/lib8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/ne2k-pci.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/pcnet_cs.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/smc-ultra.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/wd.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/zorro8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/adaptec/starfire.c", "tx_timeout"], ["drivers/net/ethernet/agere/et131x.c", "et131x_tx_timeout"], ["drivers/net/ethernet/allwinner/sun4i-emac.c", "emac_timeout"], ["drivers/net/ethernet/alteon/acenic.c", "ace_watchdog"], ["drivers/net/ethernet/amazon/ena/ena_netdev.c", "ena_tx_timeout"], ["drivers/net/ethernet/amd/7990.h", "lance_tx_timeout"], ["drivers/net/ethernet/amd/7990.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/a2065.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/am79c961a.c", "am79c961_timeout"], ["drivers/net/ethernet/amd/amd8111e.c", "amd8111e_tx_timeout"], ["drivers/net/ethernet/amd/ariadne.c", "ariadne_tx_timeout"], ["drivers/net/ethernet/amd/atarilance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/au1000_eth.c", "au1000_tx_timeout"], ["drivers/net/ethernet/amd/declance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/lance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/mvme147.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/ni65.c", "ni65_timeout"], ["drivers/net/ethernet/amd/nmclan_cs.c", "mace_tx_timeout"], ["drivers/net/ethernet/amd/pcnet32.c", "pcnet32_tx_timeout"], ["drivers/net/ethernet/amd/sunlance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/xgbe/xgbe-drv.c", "xgbe_tx_timeout"], ["drivers/net/ethernet/apm/xgene-v2/main.c", "xge_timeout"], ["drivers/net/ethernet/apm/xgene/xgene_enet_main.c", "xgene_enet_timeout"], ["drivers/net/ethernet/apple/macmace.c", "mace_tx_timeout"], ["drivers/net/ethernet/atheros/ag71xx.c", "ag71xx_tx_timeout"], ["drivers/net/ethernet/atheros/alx/main.c", "alx_tx_timeout"], ["drivers/net/ethernet/atheros/atl1c/atl1c_main.c", "atl1c_tx_timeout"], ["drivers/net/ethernet/atheros/atl1e/atl1e_main.c", "atl1e_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl1.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl2.c", "atl2_tx_timeout"], ["drivers/net/ethernet/broadcom/b44.c", "b44_tx_timeout"], ["drivers/net/ethernet/broadcom/bcmsysport.c", "bcm_sysport_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2.c", "bnx2_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnxt/bnxt.c", "bnxt_tx_timeout"], ["drivers/net/ethernet/broadcom/genet/bcmgenet.c", "bcmgenet_timeout"], ["drivers/net/ethernet/broadcom/sb1250-mac.c", "sbmac_tx_timeout"], ["drivers/net/ethernet/broadcom/tg3.c", "tg3_tx_timeout"], ["drivers/net/ethernet/calxeda/xgmac.c", "xgmac_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c", "lio_vf_rep_tx_timeout"], ["drivers/net/ethernet/cavium/thunder/nicvf_main.c", "nicvf_tx_timeout"], ["drivers/net/ethernet/cirrus/cs89x0.c", "net_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cortina/gemini.c", "gmac_tx_timeout"], ["drivers/net/ethernet/davicom/dm9000.c", "dm9000_timeout"], ["drivers/net/ethernet/dec/tulip/de2104x.c", "de_tx_timeout"], ["drivers/net/ethernet/dec/tulip/tulip_core.c", "tulip_tx_timeout"], ["drivers/net/ethernet/dec/tulip/winbond-840.c", "tx_timeout"], ["drivers/net/ethernet/dlink/dl2k.c", "rio_tx_timeout"], ["drivers/net/ethernet/dlink/sundance.c", "tx_timeout"], ["drivers/net/ethernet/emulex/benet/be_main.c", "be_tx_timeout"], ["drivers/net/ethernet/ethoc.c", "ethoc_tx_timeout"], ["drivers/net/ethernet/faraday/ftgmac100.c", "ftgmac100_tx_timeout"], ["drivers/net/ethernet/fealnx.c", "fealnx_tx_timeout"], ["drivers/net/ethernet/freescale/dpaa/dpaa_eth.c", "dpaa_tx_timeout"], ["drivers/net/ethernet/freescale/fec_main.c", "fec_timeout"], ["drivers/net/ethernet/freescale/fec_mpc52xx.c", "mpc52xx_fec_tx_timeout"], ["drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c", "fs_timeout"], ["drivers/net/ethernet/freescale/gianfar.c", "gfar_timeout"], ["drivers/net/ethernet/freescale/ucc_geth.c", "ucc_geth_timeout"], ["drivers/net/ethernet/fujitsu/fmvj18x_cs.c", "fjn_tx_timeout"], ["drivers/net/ethernet/google/gve/gve_main.c", "gve_tx_timeout"], ["drivers/net/ethernet/hisilicon/hip04_eth.c", "hip04_timeout"], ["drivers/net/ethernet/hisilicon/hix5hd2_gmac.c", "hix5hd2_net_timeout"], ["drivers/net/ethernet/hisilicon/hns/hns_enet.c", "hns_nic_net_timeout"], ["drivers/net/ethernet/hisilicon/hns3/hns3_enet.c", "hns3_nic_net_timeout"], ["drivers/net/ethernet/huawei/hinic/hinic_main.c", "hinic_tx_timeout"], ["drivers/net/ethernet/i825xx/82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/ether1.c", "ether1_timeout"], ["drivers/net/ethernet/i825xx/lib82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/sun3_82586.c", "sun3_82586_timeout"], ["drivers/net/ethernet/ibm/ehea/ehea_main.c", "ehea_tx_watchdog"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/ibmvnic.c", "ibmvnic_tx_timeout"], ["drivers/net/ethernet/intel/e100.c", "e100_tx_timeout"], ["drivers/net/ethernet/intel/e1000/e1000_main.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/e1000e/netdev.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/fm10k/fm10k_netdev.c", "fm10k_tx_timeout"], ["drivers/net/ethernet/intel/i40e/i40e_main.c", "i40e_tx_timeout"], ["drivers/net/ethernet/intel/iavf/iavf_main.c", "iavf_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/igb/igb_main.c", "igb_tx_timeout"], ["drivers/net/ethernet/intel/igbvf/netdev.c", "igbvf_tx_timeout"], ["drivers/net/ethernet/intel/ixgb/ixgb_main.c", "ixgb_tx_timeout"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c", "adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev);"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_main.c", "ixgbe_tx_timeout"], ["drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c", "ixgbevf_tx_timeout"], ["drivers/net/ethernet/jme.c", "jme_tx_timeout"], ["drivers/net/ethernet/korina.c", "korina_tx_timeout"], ["drivers/net/ethernet/lantiq_etop.c", "ltq_etop_tx_timeout"], ["drivers/net/ethernet/marvell/mv643xx_eth.c", "mv643xx_eth_tx_timeout"], ["drivers/net/ethernet/marvell/pxa168_eth.c", "pxa168_eth_tx_timeout"], ["drivers/net/ethernet/marvell/skge.c", "skge_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/mediatek/mtk_eth_soc.c", "mtk_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx5/core/en_main.c", "mlx5e_tx_timeout"], ["drivers/net/ethernet/micrel/ks8842.c", "ks8842_tx_timeout"], ["drivers/net/ethernet/micrel/ksz884x.c", "netdev_tx_timeout"], ["drivers/net/ethernet/microchip/enc28j60.c", "enc28j60_tx_timeout"], ["drivers/net/ethernet/microchip/encx24j600.c", "encx24j600_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.h", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/jazzsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/macsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/natsemi.c", "ns_tx_timeout"], ["drivers/net/ethernet/natsemi/ns83820.c", "ns83820_tx_timeout"], ["drivers/net/ethernet/natsemi/xtsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/neterion/s2io.h", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/s2io.c", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/vxge/vxge-main.c", "vxge_tx_watchdog"], ["drivers/net/ethernet/netronome/nfp/nfp_net_common.c", "nfp_net_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c", "pch_gbe_tx_timeout"], ["drivers/net/ethernet/packetengines/hamachi.c", "hamachi_tx_timeout"], ["drivers/net/ethernet/packetengines/yellowfin.c", "yellowfin_tx_timeout"], ["drivers/net/ethernet/pensando/ionic/ionic_lif.c", "ionic_tx_timeout"], ["drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c", "netxen_tx_timeout"], ["drivers/net/ethernet/qlogic/qla3xxx.c", "ql3xxx_tx_timeout"], ["drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c", "qlcnic_tx_timeout"], ["drivers/net/ethernet/qualcomm/emac/emac.c", "emac_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_spi.c", "qcaspi_netdev_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_uart.c", "qcauart_netdev_tx_timeout"], ["drivers/net/ethernet/rdc/r6040.c", "r6040_tx_timeout"], ["drivers/net/ethernet/realtek/8139cp.c", "cp_tx_timeout"], ["drivers/net/ethernet/realtek/8139too.c", "rtl8139_tx_timeout"], ["drivers/net/ethernet/realtek/atp.c", "tx_timeout"], ["drivers/net/ethernet/realtek/r8169_main.c", "rtl8169_tx_timeout"], ["drivers/net/ethernet/renesas/ravb_main.c", "ravb_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c", "sxgbe_tx_timeout"], ["drivers/net/ethernet/seeq/ether3.c", "ether3_timeout"], ["drivers/net/ethernet/seeq/sgiseeq.c", "timeout"], ["drivers/net/ethernet/sfc/efx.c", "efx_watchdog"], ["drivers/net/ethernet/sfc/falcon/efx.c", "ef4_watchdog"], ["drivers/net/ethernet/sgi/ioc3-eth.c", "ioc3_timeout"], ["drivers/net/ethernet/sgi/meth.c", "meth_tx_timeout"], ["drivers/net/ethernet/silan/sc92031.c", "sc92031_tx_timeout"], ["drivers/net/ethernet/sis/sis190.c", "sis190_tx_timeout"], ["drivers/net/ethernet/sis/sis900.c", "sis900_tx_timeout"], ["drivers/net/ethernet/smsc/epic100.c", "epic_tx_timeout"], ["drivers/net/ethernet/smsc/smc911x.c", "smc911x_timeout"], ["drivers/net/ethernet/smsc/smc9194.c", "smc_timeout"], ["drivers/net/ethernet/smsc/smc91c92_cs.c", "smc_tx_timeout"], ["drivers/net/ethernet/smsc/smc91x.c", "smc_timeout"], ["drivers/net/ethernet/stmicro/stmmac/stmmac_main.c", "stmmac_tx_timeout"], ["drivers/net/ethernet/sun/cassini.c", "cas_tx_timeout"], ["drivers/net/ethernet/sun/ldmvsw.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/niu.c", "niu_tx_timeout"], ["drivers/net/ethernet/sun/sunbmac.c", "bigmac_tx_timeout"], ["drivers/net/ethernet/sun/sungem.c", "gem_tx_timeout"], ["drivers/net/ethernet/sun/sunhme.c", "happy_meal_tx_timeout"], ["drivers/net/ethernet/sun/sunqe.c", "qe_tx_timeout"], ["drivers/net/ethernet/sun/sunvnet.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.h", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/synopsys/dwc-xlgmac-net.c", "xlgmac_tx_timeout"], ["drivers/net/ethernet/ti/cpmac.c", "cpmac_tx_timeout"], ["drivers/net/ethernet/ti/cpsw.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.h", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/davinci_emac.c", "emac_dev_tx_timeout"], ["drivers/net/ethernet/ti/netcp_core.c", "netcp_ndo_tx_timeout"], ["drivers/net/ethernet/ti/tlan.c", "tlan_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.h", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_wireless.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/spider_net.c", "spider_net_tx_timeout"], ["drivers/net/ethernet/toshiba/tc35815.c", "tc35815_tx_timeout"], ["drivers/net/ethernet/via/via-rhine.c", "rhine_tx_timeout"], ["drivers/net/ethernet/wiznet/w5100.c", "w5100_tx_timeout"], ["drivers/net/ethernet/wiznet/w5300.c", "w5300_tx_timeout"], ["drivers/net/ethernet/xilinx/xilinx_emaclite.c", "xemaclite_tx_timeout"], ["drivers/net/ethernet/xircom/xirc2ps_cs.c", "xirc_tx_timeout"], ["drivers/net/fjes/fjes_main.c", "fjes_tx_retry"], ["drivers/net/slip/slip.c", "sl_tx_timeout"], ["include/linux/usb/usbnet.h", "usbnet_tx_timeout"], ["drivers/net/usb/aqc111.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88172a.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88179_178a.c", "usbnet_tx_timeout"], ["drivers/net/usb/catc.c", "catc_tx_timeout"], ["drivers/net/usb/cdc_mbim.c", "usbnet_tx_timeout"], ["drivers/net/usb/cdc_ncm.c", "usbnet_tx_timeout"], ["drivers/net/usb/dm9601.c", "usbnet_tx_timeout"], ["drivers/net/usb/hso.c", "hso_net_tx_timeout"], ["drivers/net/usb/int51x1.c", "usbnet_tx_timeout"], ["drivers/net/usb/ipheth.c", "ipheth_tx_timeout"], ["drivers/net/usb/kaweth.c", "kaweth_tx_timeout"], ["drivers/net/usb/lan78xx.c", "lan78xx_tx_timeout"], ["drivers/net/usb/mcs7830.c", "usbnet_tx_timeout"], ["drivers/net/usb/pegasus.c", "pegasus_tx_timeout"], ["drivers/net/usb/qmi_wwan.c", "usbnet_tx_timeout"], ["drivers/net/usb/r8152.c", "rtl8152_tx_timeout"], ["drivers/net/usb/rndis_host.c", "usbnet_tx_timeout"], ["drivers/net/usb/rtl8150.c", "rtl8150_tx_timeout"], ["drivers/net/usb/sierra_net.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc75xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc95xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9700.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9800.c", "usbnet_tx_timeout"], ["drivers/net/usb/usbnet.c", "usbnet_tx_timeout"], ["drivers/net/vmxnet3/vmxnet3_drv.c", "vmxnet3_tx_timeout"], ["drivers/net/wan/cosa.c", "cosa_net_timeout"], ["drivers/net/wan/farsync.c", "fst_tx_timeout"], ["drivers/net/wan/fsl_ucc_hdlc.c", "uhdlc_tx_timeout"], ["drivers/net/wan/lmc/lmc_main.c", "lmc_driver_timeout"], ["drivers/net/wan/x25_asy.c", "x25_asy_timeout"], ["drivers/net/wimax/i2400m/netdev.c", "i2400m_tx_timeout"], ["drivers/net/wireless/intel/ipw2x00/ipw2100.c", "ipw2100_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/main.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco_usb.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco.h", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_dev.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.h", "islpci_eth_tx_timeout"], ["drivers/net/wireless/marvell/mwifiex/main.c", "mwifiex_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.c", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.h", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/rndis_wlan.c", "usbnet_tx_timeout"], ["drivers/net/wireless/wl3501_cs.c", "wl3501_tx_timeout"], ["drivers/net/wireless/zydas/zd1201.c", "zd1201_tx_timeout"], ["drivers/s390/net/qeth_core.h", "qeth_tx_timeout"], ["drivers/s390/net/qeth_core_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/staging/ks7010/ks_wlan_net.c", "ks_wlan_tx_timeout"], ["drivers/staging/qlge/qlge_main.c", "qlge_tx_timeout"], ["drivers/staging/rtl8192e/rtl8192e/rtl_core.c", "_rtl92e_tx_timeout"], ["drivers/staging/rtl8192u/r8192U_core.c", "tx_timeout"], ["drivers/staging/unisys/visornic/visornic_main.c", "visornic_xmit_timeout"], ["drivers/staging/wlan-ng/p80211netdev.c", "p80211knetdev_tx_timeout"], ["drivers/tty/n_gsm.c", "gsm_mux_net_tx_timeout"], ["drivers/tty/synclink.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclink_gt.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclinkmp.c", "hdlcdev_tx_timeout"], ["net/atm/lec.c", "lec_tx_timeout"], ["net/bluetooth/bnep/netdev.c", "bnep_net_timeout"] ); for my $p (@work) { my @pair = @$p; my $file = $pair[0]; my $func = $pair[1]; print STDERR $file , ": ", $func,"\n"; our @ARGV = ($file); while (<ARGV>) { if (m/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/) { print STDERR "found $1+$2 in $file\n"; } if (s/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/$1, unsigned int txqueue$2/) { print STDERR "$func found in $file\n"; } print; } } where the list of files and functions is simply from: git grep ndo_tx_timeout, with manual addition of headers in the rare cases where the function is from a header, then manually changing the few places which actually call ndo_tx_timeout. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Martin Habets <mhabets@solarflare.com> changes from v9: fixup a forward declaration changes from v9: more leftovers from v3 change changes from v8: fix up a missing direct call to timeout rebased on net-next changes from v7: fixup leftovers from v3 change changes from v6: fix typo in rtl driver changes from v5: add missing files (allow any net device argument name) changes from v4: add a missing driver header changes from v3: change queue # to unsigned Changes from v2: added headers Changes from v1: Fix errors found by kbuild: generalize the pattern a bit, to pick up a couple of instances missed by the previous version. Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-12 | net: ena: Add first_interrupt field to napi struct |   Sameeh Jubran | 2 | -2/+6 | |
| The first_interrupt field is accessed in ena_intr_msix_io() upon receiving an interrupt.The rx_ring and tx_ring fields of napi can be NULL when receiving interrupt for xdp queues. This patch fixes the issue by moving the field to the ena_napi struct. Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-12 | net: ena: Implement XDP_TX action | Sameeh Jubran | 3 | -186/+701 | |
| This commit implements the XDP_TX action in the ena driver. We allocate separate tx queues for the XDP_TX. We currently allow xdp only when there is enough queues to allocate for xdp. Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-12 | net: ena: implement XDP drop support | Sameeh Jubran | 2 | -11/+233 | |
| This commit implements the basic functionality of drop/pass logic in the ena driver. Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-12 | qede: Fix multicast mac configuration | Manish Chopra | 1 | -1/+1 | |
| Driver doesn't accommodate the configuration for max number of multicast mac addresses, in such particular case it leaves the device with improper/invalid multicast configuration state, causing connectivity issues (in lacp bonding like scenarios). Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-10 | net: ena: fix napi handler misbehavior when the napi budget is zero |   Netanel Belgazal | 1 | -3/+7 | |
| In netpoll the napi handler could be called with budget equal to zero. Current ENA napi handler doesn't take that into consideration. The napi handler handles Rx packets in a do-while loop. Currently, the budget check happens only after decrementing the budget, therefore the napi handler, in rare cases, could run over MAX_INT packets. In addition to that, this moves all budget related variables to int calculation and stop mixing u32 to avoid ambiguity Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-10 | cxgb4: add support for high priority filters |   Shahjada Abul Husain | 9 | -86/+234 | |
| T6 has a separate region known as high priority filter region that allows classifying packets going through ULD path. So, query firmware for HPFILTER resources and enable the high priority offload filter support when it is available. Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-10 | enetc: remove variable 'tc_max_sized_frame' set but not used |   Chen Wandun | 1 | -2/+1 | |
| Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/freescale/enetc/enetc_qos.c: In function enetc_setup_tc_cbs: drivers/net/ethernet/freescale/enetc/enetc_qos.c:195:6: warning: variable tc_max_sized_frame set but not used [-Wunused-but-set-variable] Fixes: c431047c4efe ("enetc: add support Credit Based Shaper(CBS) for hardware offload") Signed-off-by: Chen Wandun <chenwandun@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-10 | bnxt_en: Add missing devlink health reporters for VFs. |   Vasundhara Volam | 2 | -14/+22 | |
| The VF driver also needs to create the health reporters since VFs are also involved in firmware reset and recovery. Modify bnxt_dl_register() and bnxt_dl_unregister() so that they can be called by the VFs to register/unregister devlink. Only the PF will register the devlink parameters. With devlink registered, we can now create the health reporters on the VFs. Fixes: 6763c779c2d8 ("bnxt_en: Add new FW devlink_health_reporter") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-10 | bnxt_en: Fix the logic that creates the health reporters. | Vasundhara Volam | 3 | -21/+56 | |
| Fix the logic to properly check the fw capabilities and create the devlink health reporters only when needed. The current code creates the reporters unconditionally as long as bp->fw_health is valid, and that's not correct. Call bnxt_dl_fw_reporters_create() directly from the init and reset code path instead of from bnxt_dl_register(). This allows the reporters to be adjusted when capabilities change. The same applies to bnxt_dl_fw_reporters_destroy(). Fixes: 6763c779c2d8 ("bnxt_en: Add new FW devlink_health_reporter") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-10 | bnxt_en: Remove unnecessary NULL checks for fw_health | Vasundhara Volam | 2 | -9/+3 | |
| After fixing the allocation of bp->fw_health in the previous patch, the driver will not go through the fw reset and recovery code paths if bp->fw_health allocation fails. So we can now remove the unnecessary NULL checks. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-10 | bnxt_en: Fix bp->fw_health allocation and free logic. | Vasundhara Volam | 1 | -10/+26 | |
| bp->fw_health needs to be allocated for either the firmware initiated reset feature or the driver initiated error recovery feature. The current code is not allocating bp->fw_health for all the necessary cases. This patch corrects the logic to allocate bp->fw_health correctly when needed. If allocation fails, we clear the feature flags. We also add the the missing kfree(bp->fw_health) when the driver is unloaded. If we get an async reset message from the firmware, we also need to make sure that we have a valid bp->fw_health before proceeding. Fixes: 07f83d72d238 ("bnxt_en: Discover firmware error recovery capabilities.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-10 | bnxt_en: Return error if FW returns more data than dump length | Vasundhara Volam | 2 | -8/+34 | |
| If any change happened in the configuration of VF in VM while collecting live dump, there could be a race and firmware can return more data than allocated dump length. Fix it by keeping track of the accumulated core dump length copied so far and abort the copy with error code if the next chunk of core dump will exceed the original dump length. Fixes: 6c5657d085ae ("bnxt_en: Add support for ethtool get dump.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-10 | bnxt_en: Free context memory in the open path if firmware has been reset. |   Michael Chan | 1 | -0/+3 | |
| This will trigger new context memory to be rediscovered and allocated during the re-probe process after a firmware reset. Without this, the newly reset firmware does not have valid context memory and the driver will eventually fail to allocate some resources. Fixes: ec5d31e3c15d ("bnxt_en: Handle firmware reset status during IF_UP.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-10 | bnxt_en: Fix MSIX request logic for RDMA driver. | Michael Chan | 1 | -2/+6 | |
| The logic needs to check both bp->total_irqs and the reserved IRQs in hw_resc->resv_irqs if applicable and see if both are enough to cover the L2 and RDMA requested vectors. The current code is only checking bp->total_irqs and can fail in some code paths, such as the TX timeout code path with the RDMA driver requesting vectors after recovery. In this code path, we have not reserved enough MSIX resources for the RDMA driver yet. Fixes: 75720e6323a1 ("bnxt_en: Keep track of reserved IRQs.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-10 | nfp: add support for TLV device stats | Jakub Kicinski | 3 | -7/+126 | |
| Device stats are currently hard coded in the PCI BAR0 layout. Add a ability to read them from the TLV area instead. Names for the stats are maintained by the driver, and their meaning documented. This allows us to more easily add and remove device stats. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-10 | enetc: add software timestamping |   Michael Walle | 2 | -0/+3 | |
| Provide a software TX timestamp and add it to the ethtool query interface. skb_tx_timestamp() is also needed if one would like to use PHY timestamping. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-09 | net: smc911x: Adjust indentation in smc911x_phy_configure |   Nathan Chancellor | 1 | -1/+1 | |
| Clang warns: ../drivers/net/ethernet/smsc/smc911x.c:939:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] if (!lp->ctl_rfduplx) ^ ../drivers/net/ethernet/smsc/smc911x.c:936:2: note: previous statement is here if (lp->ctl_rspeed != 100) ^ 1 warning generated. This warning occurs because there is a space after the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: 0a0c72c9118c ("[PATCH] RE: [PATCH 1/1] net driver: Add support for SMSC LAN911x line of ethernet chips") Link: https://github.com/ClangBuiltLinux/linux/issues/796 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-09 | net: tulip: Adjust indentation in {dmfe, uli526x}_init_module | Nathan Chancellor | 2 | -5/+6 | |
| Clang warns: ../drivers/net/ethernet/dec/tulip/uli526x.c:1812:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] switch (mode) { ^ ../drivers/net/ethernet/dec/tulip/uli526x.c:1809:2: note: previous statement is here if (cr6set) ^ 1 warning generated. ../drivers/net/ethernet/dec/tulip/dmfe.c:2217:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] switch(mode) { ^ ../drivers/net/ethernet/dec/tulip/dmfe.c:2214:2: note: previous statement is here if (cr6set) ^ 1 warning generated. This warning occurs because there is a space before the tab on these lines. Remove them so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. While we are here, adjust the default block in dmfe_init_module to have a proper break between the label and assignment and add a space between the switch and opening parentheses to avoid a checkpatch warning. Fixes: e1c3e5014040 ("[PATCH] initialisation cleanup for ULI526x-net-driver") Link: https://github.com/ClangBuiltLinux/linux/issues/795 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-09 | qed: remove redundant assignments to rc |   Colin Ian King | 1 | -5/+5 | |
| The variable rc is assigned with a value that is never read and it is re-assigned a new value later on. The assignment is redundant and can be removed. Clean up multiple occurrances of this pattern. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-09 | net: ethernet: ti: davinci_cpdma: fix warning "device driver frees DMA memory with different size" |   Grygorii Strashko | 1 | -3/+2 | |
| The TI CPSW(s) driver produces warning with DMA API debug options enabled: WARNING: CPU: 0 PID: 1033 at kernel/dma/debug.c:1025 check_unmap+0x4a8/0x968 DMA-API: cpsw 48484000.ethernet: device driver frees DMA memory with different size [device address=0x00000000abc6aa02] [map size=64 bytes] [unmap size=42 bytes] CPU: 0 PID: 1033 Comm: ping Not tainted 5.3.0-dirty #41 Hardware name: Generic DRA72X (Flattened Device Tree) [<c0112c60>] (unwind_backtrace) from [<c010d270>] (show_stack+0x10/0x14) [<c010d270>] (show_stack) from [<c09bc564>] (dump_stack+0xd8/0x110) [<c09bc564>] (dump_stack) from [<c013b93c>] (__warn+0xe0/0x10c) [<c013b93c>] (__warn) from [<c013b9ac>] (warn_slowpath_fmt+0x44/0x6c) [<c013b9ac>] (warn_slowpath_fmt) from [<c01e0368>] (check_unmap+0x4a8/0x968) [<c01e0368>] (check_unmap) from [<c01e08a8>] (debug_dma_unmap_page+0x80/0x90) [<c01e08a8>] (debug_dma_unmap_page) from [<c0752414>] (__cpdma_chan_free+0x114/0x16c) [<c0752414>] (__cpdma_chan_free) from [<c07525c4>] (__cpdma_chan_process+0x158/0x17c) [<c07525c4>] (__cpdma_chan_process) from [<c0753690>] (cpdma_chan_process+0x3c/0x5c) [<c0753690>] (cpdma_chan_process) from [<c0758660>] (cpsw_tx_mq_poll+0x48/0x94) [<c0758660>] (cpsw_tx_mq_poll) from [<c0803018>] (net_rx_action+0x108/0x4e4) [<c0803018>] (net_rx_action) from [<c010230c>] (__do_softirq+0xec/0x598) [<c010230c>] (__do_softirq) from [<c0143914>] (do_softirq.part.4+0x68/0x74) [<c0143914>] (do_softirq.part.4) from [<c0143a44>] (__local_bh_enable_ip+0x124/0x17c) [<c0143a44>] (__local_bh_enable_ip) from [<c0871590>] (ip_finish_output2+0x294/0xb7c) [<c0871590>] (ip_finish_output2) from [<c0875440>] (ip_output+0x210/0x364) [<c0875440>] (ip_output) from [<c0875e2c>] (ip_send_skb+0x1c/0xf8) [<c0875e2c>] (ip_send_skb) from [<c08a7fd4>] (raw_sendmsg+0x9a8/0xc74) [<c08a7fd4>] (raw_sendmsg) from [<c07d6b90>] (sock_sendmsg+0x14/0x24) [<c07d6b90>] (sock_sendmsg) from [<c07d8260>] (__sys_sendto+0xbc/0x100) [<c07d8260>] (__sys_sendto) from [<c01011ac>] (__sys_trace_return+0x0/0x14) Exception stack(0xea9a7fa8 to 0xea9a7ff0) ... The reason is that cpdma_chan_submit_si() now stores original buffer length (sw_len) in CPDMA descriptor instead of adjusted buffer length (hw_len) used to map the buffer. Hence, fix an issue by passing correct buffer length in CPDMA descriptor. Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Fixes: 6670acacd59e ("net: ethernet: ti: davinci_cpdma: add dma mapped submit") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-09 | net: ethernet: freescale: make UCC_GETH explicitly depend on PPC32 |   Rasmus Villemoes | 1 | -1/+1 | |
| Currently, QUICC_ENGINE depends on PPC32, so this in itself does not change anything. In order to allow removing the PPC32 dependency from QUICC_ENGINE and avoid allmodconfig build failures, add this explicit dependency. Also, the QE Ethernet has never been integrated on any non-PowerPC SoC and most likely will not be in the future. Reviewed-by: Timur Tabi <timur@kernel.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Li Yang <leoyang.li@nxp.com> | |||||
| 2019-12-09 | treewide: Use sizeof_field() macro |   Pankaj Bharadiya | 32 | -77/+77 | |
| Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except at places where these are defined. Later patches will remove the unused definition of FIELD_SIZEOF(). This patch is generated using following script: EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h" git grep -l -e "\bFIELD_SIZEOF\b" | while read file; do if [[ "$file" =~ $EXCLUDE_FILES ]]; then continue fi sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file; done Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David Miller <davem@davemloft.net> # for net | |||||
| 2019-12-09 | mlxsw: spectrum_router: Remove unlikely user-triggerable warning |   Ido Schimmel | 1 | -1/+6 | |
| In case the driver vetoes the addition of an IPv6 multipath route, the IPv6 stack will emit delete notifications for the sibling routes that were already added to the FIB trie. Since these siblings are not present in hardware, a warning will be generated. Have the driver ignore notifications for routes it does not have. Fixes: ebee3cad835f ("ipv6: Add IPv6 multipath notifications for add / replace") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-08 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net |   Linus Torvalds | 22 | -133/+212 | |
| Pull networking fixes from David Miller: 1) More jumbo frame fixes in r8169, from Heiner Kallweit. 2) Fix bpf build in minimal configuration, from Alexei Starovoitov. 3) Use after free in slcan driver, from Jouni Hogander. 4) Flower classifier port ranges don't work properly in the HW offload case, from Yoshiki Komachi. 5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin. 6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk. 7) Fix flow dissection in dsa TX path, from Alexander Lobakin. 8) Stale syncookie timestampe fixes from Guillaume Nault. [ Did an evil merge to silence a warning introduced by this pull - Linus ] * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits) r8169: fix rtl_hw_jumbo_disable for RTL8168evl net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add() r8169: add missing RX enabling for WoL on RTL8125 vhost/vsock: accept only packets with the right dst_cid net: phy: dp83867: fix hfs boot in rgmii mode net: ethernet: ti: cpsw: fix extra rx interrupt inet: protect against too small mtu values. gre: refetch erspan header from skb->data after pskb_may_pull() pppoe: remove redundant BUG_ON() check in pppoe_pernet tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE() tcp: tighten acceptance of ACKs not matching a child socket tcp: fix rejected syncookies due to stale timestamps lpc_eth: kernel BUG on remove tcp: md5: fix potential overestimation of TCP option space net: sched: allow indirect blocks to bind to clsact in TC net: core: rename indirect block ingress cb function net-sysfs: Call dev_hold always in netdev_queue_add_kobject net: dsa: fix flow dissection on Tx path net/tls: Fix return values to avoid ENOTSUPP net: avoid an indirect call in ____sys_recvmsg() ... | |||||
| 2019-12-07 | r8169: fix rtl_hw_jumbo_disable for RTL8168evl | Heiner Kallweit | 1 | -1/+1 | |
| In referenced fix we removed the RTL8168e-specific jumbo config for RTL8168evl in rtl_hw_jumbo_enable(). We have to do the same in rtl_hw_jumbo_disable(). v2: fix referenced commit id Fixes: 14012c9f3bb9 ("r8169: fix jumbo configuration for RTL8168evl") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-07 | r8169: add missing RX enabling for WoL on RTL8125 | Heiner Kallweit | 1 | -1/+1 | |
| RTL8125 also requires to enable RX for WoL. v2: add missing Fixes tag Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-07 | net: ethernet: ti: cpsw: fix extra rx interrupt | Grygorii Strashko | 1 | -1/+1 | |
| Now RX interrupt is triggered twice every time, because in cpsw_rx_interrupt() it is asked first and then disabled. So there will be pending interrupt always, when RX interrupt is enabled again in NAPI handler. Fix it by first disabling IRQ and then do ask. Fixes: 870915feabdc ("drivers: net: cpsw: remove disable_irq/enable_irq as irq can be masked from cpsw itself") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-06 | Merge tag 'mlx5-fixes-2019-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux |   David S. Miller | 10 | -75/+143 | |
| Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-12-05 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v4.19: ('net/mlx5e: Query global pause state before setting prio2buffer') For -stable v5.3 ('net/mlx5e: Fix SFF 8472 eeprom length') ('net/mlx5e: Fix translation of link mode into speed') ('net/mlx5e: Fix freeing flow with kfree() and not kvfree()') ('net/mlx5e: ethtool, Fix analysis of speed setting') ('net/mlx5e: Fix TXQ indices to be sequential') ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-06 | lpc_eth: kernel BUG on remove |   Bruno Carneiro da Cunha | 1 | -2/+0 | |
| We may have found a bug in the nxp/lpc_eth.c driver. The function platform_set_drvdata() is called twice, the second time it is called, in lpc_mii_init(), it overwrites the struct net_device which should be at pdev->dev->driver_data with pldat->mii_bus. When trying to remove the driver, in lpc_eth_drv_remove(), platform_get_drvdata() will return the pldat->mii_bus pointer and try to use it as a struct net_device pointer. This causes unregister_netdev to segfault and generate a kernel BUG. Is this reproducible? Signed-off-by: Daniel Martinez <linux@danielsmartinez.com> Signed-off-by: Bruno Carneiro da Cunha <brunocarneirodacunha@usp.br> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-06 | net: stmmac: reset Tx desc base address before restarting Tx |   Jongsung Kim | 1 | -0/+2 | |
| Refer to the databook of DesignWare Cores Ethernet MAC Universal: 6.2.1.5 Register 4 (Transmit Descriptor List Address Register If this register is not changed when the ST bit is set to 0, then the DMA takes the descriptor address where it was stopped earlier. The stmmac_tx_err() does zero indices to Tx descriptors, but does not reset HW current Tx descriptor address. To fix inconsistency, the base address of the Tx descriptors should be rewritten before restarting Tx. Signed-off-by: Jongsung Kim <neidhard.kim@lge.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-06 | enetc: disable EEE autoneg by default | Yangbo Lu | 1 | -0/+5 | |
| The EEE support has not been enabled on ENETC, but it may connect to a PHY which supports EEE and advertises EEE by default, while its link partner also advertises EEE. If this happens, the PHY enters low power mode when the traffic rate is low and causes packet loss. This patch disables EEE advertisement by default for any PHY that ENETC connects to, to prevent the above unwanted outcome. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-05 | net: hns3: fix VF ID issue for setting VF VLAN |   Jian Shen | 1 | -12/+6 | |
| Previously, when set VF VLAN with command "ip link set <pf name> vf <vf id> vlan <vlan id>", the VF ID 0 is handled as PF incorrectly, which should be the first VF. This patch fixes it. Fixes: 21e043cd8124 ("net: hns3: fix set port based VLAN for PF") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-05 | net: hns3: fix a use after free problem in hns3_nic_maybe_stop_tx() | Yunsheng Lin | 1 | -13/+6 | |
| Currently, hns3_nic_maybe_stop_tx() uses skb_copy() to linearize a SKB if the BD num required by the SKB does not meet the hardware limitation, and it linearizes the SKB by allocating a new linearized SKB and freeing the old SKB, if hns3_nic_maybe_stop_tx() returns -EBUSY because there are no enough space in the ring to send the linearized skb to hardware, the sch_direct_xmit() still hold reference to old SKB and try to retransmit the old SKB when dev_hard_start_xmit() return TX_BUSY, which may cause use after freed problem. This patch fixes it by using __skb_linearize() to linearize the SKB in hns3_nic_maybe_stop_tx(). Fixes: 51e8439f3496 ("net: hns3: add 8 BD limit for tx flow") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
| 2019-12-05 | net: hns3: fix for TX queue not restarted problem | Yunsheng Lin | 1 | -12/+21 | |
| There is timing window between ring_space checking and netif_stop_subqueue when transmiting a SKB, and the TX BD cleaning may be executed during the time window, which may caused TX queue not restarted problem. This patch fixes it by rechecking the ring_space after netif_stop_subqueue to make sure TX queue is restarted. Also, the ring->next_to_clean is updated even when pkts is zero, because all the TX BD cleaned may be non-SKB, so it needs to check if TX queue need to be restarted. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
 |
index : linux-dev | |
| Linux kernel development work - see feature branches | Jason A. Donenfeld |
| aboutsummaryrefslogtreecommitdiffstats |