aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2022-05-02octeontx2-pf: replace bitmap_weight with bitmap_empty where appropriateYury Norov2-3/+3
In some places, octeontx2 code calls bitmap_weight() to check if any bit of a given bitmap is set. It's better to use bitmap_empty() in that case because bitmap_empty() stops traversing the bitmap as soon as it finds first set bit, while bitmap_weight() counts all bits unconditionally. Signed-off-by: Yury Norov <yury.norov@gmail.com>
2022-05-02qed: rework qed_rdma_bmap_free()Yury Norov1-30/+13
qed_rdma_bmap_free() is mostly an opencoded version of printk("%*pb"). Using %*pb format simplifies the code, and helps to avoid inefficient usage of bitmap_weight(). While here, reorganize logic to avoid calculating bmap weight if check is false. Signed-off-by: Yury Norov <yury.norov@gmail.com>
2022-05-02net: mellanox: fix open-coded for_each_set_bit()Yury Norov1-17/+6
Mellanox driver has an open-coded for_each_set_bit(). Fix it. Signed-off-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
2022-05-02net: systemport: don't use bitmap_weight() in bcm_sysport_rule_set()Yury Norov1-5/+1
Don't call bitmap_weight() if the following code can get by without it. Signed-off-by: Yury Norov <yury.norov@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com>
2022-05-02nfp: support VxLAN inner TSO with GSO_PARTIAL offloadFei Qin1-2/+6
VxLAN belongs to UDP-based encapsulation protocol. Inner TSO for VxLAN packet with udpcsum requires offloading of outer header csum. The device doesn't support outer header csum offload. However, inner TSO for VxLAN with udpcsum can still work with GSO_PARTIAL offload, which means outer udp csum computed by stack and inner tcp segmentation finished by hardware. Thus, the patch enable features "NETIF_F_GSO_UDP_TUNNEL_CSUM" and "NETIF_F_GSO_PARTIAL" and set gso_partial_features. Signed-off-by: Fei Qin <fei.qin@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220430231150.175270-1-simon.horman@corigine.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-01pci_irq_vector() can't be used in atomic context any longer. This conflictsThomas Gleixner1-8/+8
with the usage of this function in nic_mbx_intr_handler(). Cache the Linux interrupt numbers in struct nicpf and use that cache in the interrupt handler to select the mailbox. Fixes: 495c66aca3da ("genirq/msi: Convert to new functions") Reported-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Sunil Goutham <sgoutham@marvell.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Link: https://bugzilla.redhat.com/show_bug.cgi?id=2041772 Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01net: stmmac: disable Split Header (SPH) for Intel platformsTan Tee Min2-1/+2
Based on DesignWare Ethernet QoS datasheet, we are seeing the limitation of Split Header (SPH) feature is not supported for Ipv4 fragmented packet. This SPH limitation will cause ping failure when the packets size exceed the MTU size. For example, the issue happens once the basic ping packet size is larger than the configured MTU size and the data is lost inside the fragmented packet, replaced by zeros/corrupted values, and leads to ping fail. So, disable the Split Header for Intel platforms. v2: Add fixes tag in commit message. Fixes: 67afd6d1cfdf("net: stmmac: Add Split Header support and enable it in XGMAC cores") Cc: <stable@vger.kernel.org> # 5.10.x Suggested-by: Ong, Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30eth: remove remaining copies of the NAPI_POLL_WEIGHT defineJakub Kicinski3-8/+5
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. This patch covers three more drivers which I missed in commit 5f012b40ef63 ("eth: remove copies of the NAPI_POLL_WEIGHT define"). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30net/funeth: simplify the return expression of fun_dl_info_get()Minghao Chi1-7/+1
Simplify the return expression. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30qede: Reduce verbosity of ptp tx timestampPrabhakar Kushwaha1-5/+5
Reduce verbosity of ptp tx timestamp error to reduce excessive log messages. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30net: ethernet: ocelot: remove the need for num_stats initializerColin Foster2-1/+6
There is a desire to share the oclot_stats_layout struct outside of the current vsc7514 driver. In order to do so, the length of the array needs to be known at compile time, and defined in the struct ocelot and struct felix_info. Since the array is defined in a .c file and would be declared in the header file via: extern struct ocelot_stat_layout[]; the size of the array will not be known at compile time to outside modules. To fix this, remove the need for defining the number of stats at compile time and allow this number to be determined at initialization. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30net: cpsw: add missing of_node_put() in cpsw_probe_dt()Yang Yingliang1-1/+4
'tmp_node' need be put before returning from cpsw_probe_dt(), so add missing of_node_put() in error path. Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30net: lan966x: remove PHY reset supportMichael Walle1-7/+1
The PHY subsystem as well as the MIIM mdio driver (in case of the integrated PHYs) will take care of the resets. A separate reset driver isn't needed. There is no in-tree user of this feature. Remove the support. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-29net: stmmac: dwmac-sun8i: add missing of_node_put() in sun8i_dwmac_register_mdio_mux()Yang Yingliang1-0/+1
The node pointer returned by of_get_child_by_name() with refcount incremented, so add of_node_put() after using it. Fixes: 634db83b8265 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220428095716.540452-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-29nfp: flower: utilize the tuple iifidx in offloading ct flowsYinjun Zhang1-3/+22
The device info from which conntrack originates is stored in metadata field of the ct flow to offload now, driver can utilize it to reduce the number of offloaded flows. v2: Drop inline keyword from get_netdev_from_rule() signature. The compiler can decide. Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220429075124.128589-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-29sfc: add EF100 VF support via a write to sriov_numvfsPieter Jansen van Vuuren5-3/+102
This patch extends the EF100 PF driver by adding .sriov_configure() which would allow users to enable and disable virtual functions using the sriov sysfs. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/r/75e74d9e-14ce-0524-9668-5ab735a7cf62@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-29hinic: fix bug of wq out of bound accessQiao Ma1-2/+5
If wq has only one page, we need to check wqe rolling over page by compare end_idx and curr_idx, and then copy wqe to shadow wqe to avoid out of bound access. This work has been done in hinic_get_wqe, but missed for hinic_read_wqe. This patch fixes it, and removes unnecessary MASKED_WQE_IDX(). Fixes: 7dd29ee12865 ("hinic: add sriov feature support") Signed-off-by: Qiao Ma <mqaio@linux.alibaba.com> Reviewed-by: Xunlei Pang <xlpang@linux.alibaba.com> Link: https://lore.kernel.org/r/282817b0e1ae2e28fdf3ed8271a04e77f57bf42e.1651148587.git.mqaio@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-29net: ethernet: mediatek: add missing of_node_put() in mtk_sgmii_init()Yang Yingliang1-0/+1
The node pointer returned by of_parse_phandle() with refcount incremented, so add of_node_put() after using it in mtk_sgmii_init(). Fixes: 9ffee4a8276c ("net: ethernet: mediatek: Extend SGMII related functions") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220428062543.64883-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-29eth: velocity: remove a copy of the NAPI_POLL_WEIGHT defineJakub Kicinski2-3/+1
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-29eth: spider: remove a copy of the NAPI_POLL_WEIGHT defineJakub Kicinski2-2/+1
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. Acked-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-29eth: vxge: remove a copy of the NAPI_POLL_WEIGHT defineJakub Kicinski2-3/+1
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-29eth: gfar: remove a copy of the NAPI_POLL_WEIGHT defineJakub Kicinski2-4/+1
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-29eth: benet: remove a copy of the NAPI_POLL_WEIGHT defineJakub Kicinski2-3/+2
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-29eth: atlantic: remove a copy of the NAPI_POLL_WEIGHT defineJakub Kicinski3-4/+2
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-29net: bgmac: remove a copy of the NAPI_POLL_WEIGHT defineJakub Kicinski2-3/+1
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-29slic: remove a copy of the NAPI_POLL_WEIGHT defineJakub Kicinski2-3/+1
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-29eth: mtk_eth_soc: remove a copy of the NAPI_POLL_WEIGHT defineJakub Kicinski2-3/+2
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-29eth: pch_gbe: remove a copy of the NAPI_POLL_WEIGHT defineJakub Kicinski1-7/+5
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-29eth: cpsw: remove a copy of the NAPI_POLL_WEIGHT defineJakub Kicinski4-11/+10
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-29eth: smsc: remove a copy of the NAPI_POLL_WEIGHT defineJakub Kicinski2-2/+1
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-29eth: remove copies of the NAPI_POLL_WEIGHT defineJakub Kicinski6-14/+7
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. Drop the special defines in a bunch of drivers where the removal is relatively simple so grouping into one patch does not impact reviewability. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Paul Durrant <paul@xen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-28net: prestera: add police action supportVolodymyr Mytnyk5-2/+149
- Add HW api to configure policer: - SR TCM policer mode is only supported for now. - Policer ingress/egress direction support. - Add police action support into flower Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Link: https://lore.kernel.org/r/1651061148-21321-1-git-send-email-volodymyr.mytnyk@plvision.eu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski18-194/+162
include/linux/netdevice.h net/core/dev.c 6510ea973d8d ("net: Use this_cpu_inc() to increment net->core_stats") 794c24e9921f ("net-core: rx_otherhost_dropped to core_stats") https://lore.kernel.org/all/20220428111903.5f4304e0@canb.auug.org.au/ drivers/net/wan/cosa.c d48fea8401cf ("net: cosa: fix error check return value of register_chrdev()") 89fbca3307d4 ("net: wan: remove support for COSA and SRP synchronous serial boards") https://lore.kernel.org/all/20220428112130.1f689e5e@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-28Revert "ibmvnic: Add ethtool private flag for driver-defined queue limits"Dany Madden2-100/+35
This reverts commit 723ad916134784b317b72f3f6cf0f7ba774e5dae When client requests channel or ring size larger than what the server can support the server will cap the request to the supported max. So, the client would not be able to successfully request resources that exceed the server limit. Fixes: 723ad9161347 ("ibmvnic: Add ethtool private flag for driver-defined queue limits") Signed-off-by: Dany Madden <drt@linux.ibm.com> Link: https://lore.kernel.org/r/20220427235146.23189-1-drt@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-28net: enetc: allow tc-etf offload even with NETIF_F_CSUM_MASKVladimir Oltean1-4/+0
The Time-Specified Departure feature is indeed mutually exclusive with TX IP checksumming in ENETC, but TX checksumming in itself is broken and was removed from this driver in commit 82728b91f124 ("enetc: Remove Tx checksumming offload code"). The blamed commit declared NETIF_F_HW_CSUM in dev->features to comply with software TSO's expectations, and still did the checksumming in software by calling skb_checksum_help(). So there isn't any restriction for the Time-Specified Departure feature. However, enetc_setup_tc_txtime() doesn't understand that, and blindly looks for NETIF_F_CSUM_MASK. Instead of checking for things which can literally never happen in the current code base, just remove the check and let the driver offload tc-etf qdiscs. Fixes: acede3c5dad5 ("net: enetc: declare NETIF_F_HW_CSUM and do it in software") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220427203017.1291634-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-28ixgbe: ensure IPsec VF<->PF compatibilityLeon Romanovsky1-1/+2
The VF driver can forward any IPsec flags and such makes the function is not extendable and prone to backward/forward incompatibility. If new software runs on VF, it won't know that PF configured something completely different as it "knows" only XFRM_OFFLOAD_INBOUND flag. Fixes: eda0333ac293 ("ixgbe: add VF IPsec management") Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Shannon Nelson <snelson@pensando.io> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220427173152.443102-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-27net: fec: add missing of_node_put() in fec_enet_init_stop_mode()Yang Yingliang1-1/+1
Put device node in error path in fec_enet_init_stop_mode(). Fixes: 8a448bf832af ("net: ethernet: fec: move GPR register offset and bit into DT") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220426125231.375688-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-27bnx2x: fix napi API usage sequenceManish Chopra1-4/+5
While handling PCI errors (AER flow) driver tries to disable NAPI [napi_disable()] after NAPI is deleted [__netif_napi_del()] which causes unexpected system hang/crash. System message log shows the following: ======================================= [ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures. [ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)' [ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->error_detected(IO frozen) [ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports: 'need reset' [ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking bnx2x->error_detected(IO frozen) [ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports: 'need reset' [ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset' [ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor: 168e14e4 [ 3222.583557] EEH: PCI cmd/status register: 00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow: [ 3222.583744] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20: 00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows: [ 3222.584079] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor: 168e14e4 [ 3222.584491] EEH: PCI cmd/status register: 00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow: [ 3222.584677] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20: 00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows: [ 3222.585011] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset' [ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->slot_reset() [ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing... [ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset --> driver unload Uninterruptible tasks ===================== crash> ps | grep UN 213 2 11 c000000004c89e00 UN 0.0 0 0 [eehd] 215 2 0 c000000004c80000 UN 0.0 0 0 [kworker/0:2] 2196 1 28 c000000004504f00 UN 0.1 15936 11136 wickedd 4287 1 9 c00000020d076800 UN 0.0 4032 3008 agetty 4289 1 20 c00000020d056680 UN 0.0 7232 3840 agetty 32423 2 26 c00000020038c580 UN 0.0 0 0 [kworker/26:3] 32871 4241 27 c0000002609ddd00 UN 0.1 18624 11648 sshd 32920 10130 16 c00000027284a100 UN 0.1 48512 12608 sendmail 33092 32987 0 c000000205218b00 UN 0.1 48512 12608 sendmail 33154 4567 16 c000000260e51780 UN 0.1 48832 12864 pickup 33209 4241 36 c000000270cb6500 UN 0.1 18624 11712 sshd 33473 33283 0 c000000205211480 UN 0.1 48512 12672 sendmail 33531 4241 37 c00000023c902780 UN 0.1 18624 11648 sshd EEH handler hung while bnx2x sleeping and holding RTNL lock =========================================================== crash> bt 213 PID: 213 TASK: c000000004c89e00 CPU: 11 COMMAND: "eehd" #0 [c000000004d477e0] __schedule at c000000000c70808 #1 [c000000004d478b0] schedule at c000000000c70ee0 #2 [c000000004d478e0] schedule_timeout at c000000000c76dec #3 [c000000004d479c0] msleep at c0000000002120cc #4 [c000000004d479f0] napi_disable at c000000000a06448 ^^^^^^^^^^^^^^^^ #5 [c000000004d47a30] bnx2x_netif_stop at c0080000018dba94 [bnx2x] #6 [c000000004d47a60] bnx2x_io_slot_reset at c0080000018a551c [bnx2x] #7 [c000000004d47b20] eeh_report_reset at c00000000004c9bc #8 [c000000004d47b90] eeh_pe_report at c00000000004d1a8 #9 [c000000004d47c40] eeh_handle_normal_event at c00000000004da64 And the sleeping source code ============================ crash> dis -ls c000000000a06448 FILE: ../net/core/dev.c LINE: 6702 6697 { 6698 might_sleep(); 6699 set_bit(NAPI_STATE_DISABLE, &n->state); 6700 6701 while (test_and_set_bit(NAPI_STATE_SCHED, &n->state)) * 6702 msleep(1); 6703 while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state)) 6704 msleep(1); 6705 6706 hrtimer_cancel(&n->timer); 6707 6708 clear_bit(NAPI_STATE_DISABLE, &n->state); 6709 } EEH calls into bnx2x twice based on the system log above, first through bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes the following call chains: bnx2x_io_error_detected() +-> bnx2x_eeh_nic_unload() +-> bnx2x_del_all_napi() +-> __netif_napi_del() bnx2x_io_slot_reset() +-> bnx2x_netif_stop() +-> bnx2x_napi_disable() +->napi_disable() Fix this by correcting the sequence of NAPI APIs usage, that is delete the NAPI after disabling it. Fixes: 7fa6f34081f1 ("bnx2x: AER revised") Reported-by: David Christensen <drc@linux.vnet.ibm.com> Tested-by: David Christensen <drc@linux.vnet.ibm.com> Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Link: https://lore.kernel.org/r/20220426153913.6966-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-27Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski8-59/+95
Daniel Borkmann says: ==================== pull-request: bpf-next 2022-04-27 We've added 85 non-merge commits during the last 18 day(s) which contain a total of 163 files changed, 4499 insertions(+), 1521 deletions(-). The main changes are: 1) Teach libbpf to enhance BPF verifier log with human-readable and relevant information about failed CO-RE relocations, from Andrii Nakryiko. 2) Add typed pointer support in BPF maps and enable it for unreferenced pointers (via probe read) and referenced ones that can be passed to in-kernel helpers, from Kumar Kartikeya Dwivedi. 3) Improve xsk to break NAPI loop when rx queue gets full to allow for forward progress to consume descriptors, from Maciej Fijalkowski & Björn Töpel. 4) Fix a small RCU read-side race in BPF_PROG_RUN routines which dereferenced the effective prog array before the rcu_read_lock, from Stanislav Fomichev. 5) Implement BPF atomic operations for RV64 JIT, and add libbpf parsing logic for USDT arguments under riscv{32,64}, from Pu Lehui. 6) Implement libbpf parsing of USDT arguments under aarch64, from Alan Maguire. 7) Enable bpftool build for musl and remove nftw with FTW_ACTIONRETVAL usage so it can be shipped under Alpine which is musl-based, from Dominique Martinet. 8) Clean up {sk,task,inode} local storage trace RCU handling as they do not need to use call_rcu_tasks_trace() barrier, from KP Singh. 9) Improve libbpf API documentation and fix error return handling of various API functions, from Grant Seltzer. 10) Enlarge offset check for bpf_skb_{load,store}_bytes() helpers given data length of frags + frag_list may surpass old offset limit, from Liu Jian. 11) Various improvements to prog_tests in area of logging, test execution and by-name subtest selection, from Mykola Lysenko. 12) Simplify map_btf_id generation for all map types by moving this process to build time with help of resolve_btfids infra, from Menglong Dong. 13) Fix a libbpf bug in probing when falling back to legacy bpf_probe_read*() helpers; the probing caused always to use old helpers, from Runqing Yang. 14) Add support for ARCompact and ARCv2 platforms for libbpf's PT_REGS tracing macros, from Vladimir Isaev. 15) Cleanup BPF selftests to remove old & unneeded rlimit code given kernel switched to memcg-based memory accouting a while ago, from Yafang Shao. 16) Refactor of BPF sysctl handlers to move them to BPF core, from Yan Zhu. 17) Fix BPF selftests in two occasions to work around regressions caused by latest LLVM to unblock CI until their fixes are worked out, from Yonghong Song. 18) Misc cleanups all over the place, from various others. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits) selftests/bpf: Add libbpf's log fixup logic selftests libbpf: Fix up verifier log for unguarded failed CO-RE relos libbpf: Simplify bpf_core_parse_spec() signature libbpf: Refactor CO-RE relo human description formatting routine libbpf: Record subprog-resolved CO-RE relocations unconditionally selftests/bpf: Add CO-RE relos and SEC("?...") to linked_funcs selftests libbpf: Avoid joining .BTF.ext data with BPF programs by section name libbpf: Fix logic for finding matching program for CO-RE relocation libbpf: Drop unhelpful "program too large" guess libbpf: Fix anonymous type check in CO-RE logic bpf: Compute map_btf_id during build time selftests/bpf: Add test for strict BTF type check selftests/bpf: Add verifier tests for kptr selftests/bpf: Add C tests for kptr libbpf: Add kptr type tag macros to bpf_helpers.h bpf: Make BTF type match stricter for release arguments bpf: Teach verifier about kptr_get kfunc helpers bpf: Wire up freeing of referenced kptr bpf: Populate pairs of btf_id and destructor kfunc in btf bpf: Adapt copy_map_value for multiple offset case ... ==================== Link: https://lore.kernel.org/r/20220427224758.20976-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-27net: lan966x: Add support for PTP_PF_EXTTSHoratiu Vultur3-1/+127
Extend the PTP programmable pins to implement also PTP_PF_EXTTS function. The PTP pin can be configured to capture only on the rising edge of the PPS signal. And once an event is seen then an interrupt is generated and the local time counter is saved. The interrupt is shared between all the pins. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-27net: lan966x: Add support for PTP_PF_PEROUTHoratiu Vultur2-0/+169
Lan966x has 8 PTP programmable pins, where the last pins is hardcoded to be used by PHC0, which does the frame timestamping. All the rest of the PTP pins can be shared between the PHCs and can have different functions like perout or extts. For now add support for PTP_FS_PEROUT. The HW is not able to support absolute start time but can use the nsec for phase adjustment when generating PPS. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-27net: lan966x: Add registers used to configure the PTP pinHoratiu Vultur1-0/+40
Add registers that are used to configure the PTP pins. These registers are used to enable the interrupts per PTP pin and to set the waveform generated by the pin. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-27net: lan966x: Change the PTP pin used to read/write the PHC.Horatiu Vultur1-1/+1
To read/write a value to a PHC, it is required to use a PTP pin. Currently it is used pin 5, but change to pin 7 as is the last pin. All the other pins will have different functions. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-26net: stmmac: dwmac-imx: comment spelling fixMarcel Ziswiler1-2/+2
Fix spelling in comment. Fixes: 94abdad6974a ("net: ethernet: dwmac: add ethernet glue logic for NXP imx8 chip") Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Link: https://lore.kernel.org/r/20220425154856.169499-1-marcel@ziswiler.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-26net: remove comments that mention obsolete __SLOW_DOWN_IOBjorn Helgaas2-4/+0
The only remaining definitions of __SLOW_DOWN_IO (for alpha and ia64) do nothing, and the only mentions in networking are in comments. Remove these mentions. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-26net: wan: atp: remove unused eeprom_delay()Bjorn Helgaas1-4/+0
atp.h is included only by atp.c, which does not use eeprom_delay(). Remove the unused definition. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-26ice: fix use-after-free when deinitializing mailbox snapshotJacob Keller1-1/+1
During ice_sriov_configure, if num_vfs is 0, we are being asked by the kernel to remove all VFs. The driver first de-initializes the snapshot before freeing all the VFs. This results in a use-after-free BUG detected by KASAN. The bug occurs because the snapshot can still be accessed until all VFs are removed. Fix this by freeing all the VFs first before calling ice_mbx_deinit_snapshot. [ +0.032591] ================================================================== [ +0.000021] BUG: KASAN: use-after-free in ice_mbx_vf_state_handler+0x1c3/0x410 [ice] [ +0.000315] Write of size 28 at addr ffff889908eb6f28 by task kworker/55:2/1530996 [ +0.000029] CPU: 55 PID: 1530996 Comm: kworker/55:2 Kdump: loaded Tainted: G S I 5.17.0-dirty #1 [ +0.000022] Hardware name: Dell Inc. PowerEdge R740/0923K0, BIOS 1.6.13 12/17/2018 [ +0.000013] Workqueue: ice ice_service_task [ice] [ +0.000279] Call Trace: [ +0.000012] <TASK> [ +0.000011] dump_stack_lvl+0x33/0x42 [ +0.000030] print_report.cold.13+0xb2/0x6b3 [ +0.000028] ? ice_mbx_vf_state_handler+0x1c3/0x410 [ice] [ +0.000295] kasan_report+0xa5/0x120 [ +0.000026] ? __switch_to_asm+0x21/0x70 [ +0.000024] ? ice_mbx_vf_state_handler+0x1c3/0x410 [ice] [ +0.000298] kasan_check_range+0x183/0x1e0 [ +0.000019] memset+0x1f/0x40 [ +0.000018] ice_mbx_vf_state_handler+0x1c3/0x410 [ice] [ +0.000304] ? ice_conv_link_speed_to_virtchnl+0x160/0x160 [ice] [ +0.000297] ? ice_vsi_dis_spoofchk+0x40/0x40 [ice] [ +0.000305] ice_is_malicious_vf+0x1aa/0x250 [ice] [ +0.000303] ? ice_restore_all_vfs_msi_state+0x160/0x160 [ice] [ +0.000297] ? __mutex_unlock_slowpath.isra.15+0x410/0x410 [ +0.000022] ? ice_debug_cq+0xb7/0x230 [ice] [ +0.000273] ? __kasan_slab_alloc+0x2f/0x90 [ +0.000022] ? memset+0x1f/0x40 [ +0.000017] ? do_raw_spin_lock+0x119/0x1d0 [ +0.000022] ? rwlock_bug.part.2+0x60/0x60 [ +0.000024] __ice_clean_ctrlq+0x3a6/0xd60 [ice] [ +0.000273] ? newidle_balance+0x5b1/0x700 [ +0.000026] ? ice_print_link_msg+0x2f0/0x2f0 [ice] [ +0.000271] ? update_cfs_group+0x1b/0x140 [ +0.000018] ? load_balance+0x1260/0x1260 [ +0.000022] ? ice_process_vflr_event+0x27/0x130 [ice] [ +0.000301] ice_service_task+0x136e/0x1470 [ice] [ +0.000281] process_one_work+0x3b4/0x6c0 [ +0.000030] worker_thread+0x65/0x660 [ +0.000023] ? __kthread_parkme+0xe4/0x100 [ +0.000021] ? process_one_work+0x6c0/0x6c0 [ +0.000020] kthread+0x179/0x1b0 [ +0.000018] ? kthread_complete_and_exit+0x20/0x20 [ +0.000022] ret_from_fork+0x22/0x30 [ +0.000026] </TASK> [ +0.000018] Allocated by task 10742: [ +0.000013] kasan_save_stack+0x1c/0x40 [ +0.000018] __kasan_kmalloc+0x84/0xa0 [ +0.000016] kmem_cache_alloc_trace+0x16c/0x2e0 [ +0.000015] intel_iommu_probe_device+0xeb/0x860 [ +0.000015] __iommu_probe_device+0x9a/0x2f0 [ +0.000016] iommu_probe_device+0x43/0x270 [ +0.000015] iommu_bus_notifier+0xa7/0xd0 [ +0.000015] blocking_notifier_call_chain+0x90/0xc0 [ +0.000017] device_add+0x5f3/0xd70 [ +0.000014] pci_device_add+0x404/0xa40 [ +0.000015] pci_iov_add_virtfn+0x3b0/0x550 [ +0.000016] sriov_enable+0x3bb/0x600 [ +0.000013] ice_ena_vfs+0x113/0xa79 [ice] [ +0.000293] ice_sriov_configure.cold.17+0x21/0xe0 [ice] [ +0.000291] sriov_numvfs_store+0x160/0x200 [ +0.000015] kernfs_fop_write_iter+0x1db/0x270 [ +0.000018] new_sync_write+0x21d/0x330 [ +0.000013] vfs_write+0x376/0x410 [ +0.000013] ksys_write+0xba/0x150 [ +0.000012] do_syscall_64+0x3a/0x80 [ +0.000012] entry_SYSCALL_64_after_hwframe+0x44/0xae [ +0.000028] Freed by task 10742: [ +0.000011] kasan_save_stack+0x1c/0x40 [ +0.000015] kasan_set_track+0x21/0x30 [ +0.000016] kasan_set_free_info+0x20/0x30 [ +0.000012] __kasan_slab_free+0x104/0x170 [ +0.000016] kfree+0x9b/0x470 [ +0.000013] devres_destroy+0x1c/0x20 [ +0.000015] devm_kfree+0x33/0x40 [ +0.000012] ice_mbx_deinit_snapshot+0x39/0x70 [ice] [ +0.000295] ice_sriov_configure+0xb0/0x260 [ice] [ +0.000295] sriov_numvfs_store+0x1bc/0x200 [ +0.000015] kernfs_fop_write_iter+0x1db/0x270 [ +0.000016] new_sync_write+0x21d/0x330 [ +0.000012] vfs_write+0x376/0x410 [ +0.000012] ksys_write+0xba/0x150 [ +0.000012] do_syscall_64+0x3a/0x80 [ +0.000012] entry_SYSCALL_64_after_hwframe+0x44/0xae [ +0.000024] Last potentially related work creation: [ +0.000010] kasan_save_stack+0x1c/0x40 [ +0.000016] __kasan_record_aux_stack+0x98/0xa0 [ +0.000013] insert_work+0x34/0x160 [ +0.000015] __queue_work+0x20e/0x650 [ +0.000016] queue_work_on+0x4c/0x60 [ +0.000015] nf_nat_masq_schedule+0x297/0x2e0 [nf_nat] [ +0.000034] masq_device_event+0x5a/0x60 [nf_nat] [ +0.000031] raw_notifier_call_chain+0x5f/0x80 [ +0.000017] dev_close_many+0x1d6/0x2c0 [ +0.000015] unregister_netdevice_many+0x4e3/0xa30 [ +0.000015] unregister_netdevice_queue+0x192/0x1d0 [ +0.000014] iavf_remove+0x8f9/0x930 [iavf] [ +0.000058] pci_device_remove+0x65/0x110 [ +0.000015] device_release_driver_internal+0xf8/0x190 [ +0.000017] pci_stop_bus_device+0xb5/0xf0 [ +0.000014] pci_stop_and_remove_bus_device+0xe/0x20 [ +0.000016] pci_iov_remove_virtfn+0x19c/0x230 [ +0.000015] sriov_disable+0x4f/0x170 [ +0.000014] ice_free_vfs+0x9a/0x490 [ice] [ +0.000306] ice_sriov_configure+0xb8/0x260 [ice] [ +0.000294] sriov_numvfs_store+0x1bc/0x200 [ +0.000015] kernfs_fop_write_iter+0x1db/0x270 [ +0.000016] new_sync_write+0x21d/0x330 [ +0.000012] vfs_write+0x376/0x410 [ +0.000012] ksys_write+0xba/0x150 [ +0.000012] do_syscall_64+0x3a/0x80 [ +0.000012] entry_SYSCALL_64_after_hwframe+0x44/0xae [ +0.000025] The buggy address belongs to the object at ffff889908eb6f00 which belongs to the cache kmalloc-96 of size 96 [ +0.000016] The buggy address is located 40 bytes inside of 96-byte region [ffff889908eb6f00, ffff889908eb6f60) [ +0.000026] The buggy address belongs to the physical page: [ +0.000010] page:00000000b7e99a2e refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1908eb6 [ +0.000016] flags: 0x57ffffc0000200(slab|node=1|zone=2|lastcpupid=0x1fffff) [ +0.000024] raw: 0057ffffc0000200 ffffea0069d9fd80 dead000000000002 ffff88810004c780 [ +0.000015] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 [ +0.000009] page dumped because: kasan: bad access detected [ +0.000016] Memory state around the buggy address: [ +0.000012] ffff889908eb6e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc [ +0.000014] ffff889908eb6e80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc [ +0.000014] >ffff889908eb6f00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc [ +0.000011] ^ [ +0.000013] ffff889908eb6f80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc [ +0.000013] ffff889908eb7000: fa fb fb fb fb fb fb fb fc fc fc fc fa fb fb fb [ +0.000012] ================================================================== Fixes: 0891c89674e8 ("ice: warn about potentially malicious VFs") Reported-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-26ice: wait 5 s for EMP reset after firmware flashPetr Oros1-0/+3
We need to wait 5 s for EMP reset after firmware flash. Code was extracted from OOT driver (ice v1.8.3 downloaded from sourceforge). Without this wait, fw_activate let card in inconsistent state and recoverable only by second flash/activate. Flash was tested on these fw's: From -> To 3.00 -> 3.10/3.20 3.10 -> 3.00/3.20 3.20 -> 3.00/3.10 Reproducer: [root@host ~]# devlink dev flash pci/0000:ca:00.0 file E810_XXVDA4_FH_O_SEC_FW_1p6p1p9_NVM_3p10_PLDMoMCTP_0.11_8000AD7B.bin Preparing to flash [fw.mgmt] Erasing [fw.mgmt] Erasing done [fw.mgmt] Flashing 100% [fw.mgmt] Flashing done 100% [fw.undi] Erasing [fw.undi] Erasing done [fw.undi] Flashing 100% [fw.undi] Flashing done 100% [fw.netlist] Erasing [fw.netlist] Erasing done [fw.netlist] Flashing 100% [fw.netlist] Flashing done 100% Activate new firmware by devlink reload [root@host ~]# devlink dev reload pci/0000:ca:00.0 action fw_activate reload_actions_performed: fw_activate [root@host ~]# ip link show ens7f0 71: ens7f0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000 link/ether b4:96:91:dc:72:e0 brd ff:ff:ff:ff:ff:ff altname enp202s0f0 dmesg after flash: [ 55.120788] ice: Copyright (c) 2018, Intel Corporation. [ 55.274734] ice 0000:ca:00.0: Get PHY capabilities failed status = -5, continuing anyway [ 55.569797] ice 0000:ca:00.0: The DDP package was successfully loaded: ICE OS Default Package version 1.3.28.0 [ 55.603629] ice 0000:ca:00.0: Get PHY capability failed. [ 55.608951] ice 0000:ca:00.0: ice_init_nvm_phy_type failed: -5 [ 55.647348] ice 0000:ca:00.0: PTP init successful [ 55.675536] ice 0000:ca:00.0: DCB is enabled in the hardware, max number of TCs supported on this port are 8 [ 55.685365] ice 0000:ca:00.0: FW LLDP is disabled, DCBx/LLDP in SW mode. [ 55.692179] ice 0000:ca:00.0: Commit DCB Configuration to the hardware [ 55.701382] ice 0000:ca:00.0: 126.024 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x8 link at 0000:c9:02.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) Reboot doesn’t help, only second flash/activate with OOT or patched driver put card back in consistent state. After patch: [root@host ~]# devlink dev flash pci/0000:ca:00.0 file E810_XXVDA4_FH_O_SEC_FW_1p6p1p9_NVM_3p10_PLDMoMCTP_0.11_8000AD7B.bin Preparing to flash [fw.mgmt] Erasing [fw.mgmt] Erasing done [fw.mgmt] Flashing 100% [fw.mgmt] Flashing done 100% [fw.undi] Erasing [fw.undi] Erasing done [fw.undi] Flashing 100% [fw.undi] Flashing done 100% [fw.netlist] Erasing [fw.netlist] Erasing done [fw.netlist] Flashing 100% [fw.netlist] Flashing done 100% Activate new firmware by devlink reload [root@host ~]# devlink dev reload pci/0000:ca:00.0 action fw_activate reload_actions_performed: fw_activate [root@host ~]# ip link show ens7f0 19: ens7f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether b4:96:91:dc:72:e0 brd ff:ff:ff:ff:ff:ff altname enp202s0f0 Fixes: 399e27dbbd9e94 ("ice: support immediate firmware activation via devlink reload") Signed-off-by: Petr Oros <poros@redhat.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-26ice: Protect vf_state check by cfg_lock in ice_vc_process_vf_msg()Ivan Vecera1-7/+5
Previous patch labelled "ice: Fix incorrect locking in ice_vc_process_vf_msg()" fixed an issue with ignored messages sent by VF driver but a small race window still left. Recently caught trace during 'ip link set ... vf 0 vlan ...' operation: [ 7332.995625] ice 0000:3b:00.0: Clearing port VLAN on VF 0 [ 7333.001023] iavf 0000:3b:01.0: Reset indication received from the PF [ 7333.007391] iavf 0000:3b:01.0: Scheduling reset task [ 7333.059575] iavf 0000:3b:01.0: PF returned error -5 (IAVF_ERR_PARAM) to our request 3 [ 7333.059626] ice 0000:3b:00.0: Invalid message from VF 0, opcode 3, len 4, error -1 Setting of VLAN for VF causes a reset of the affected VF using ice_reset_vf() function that runs with cfg_lock taken: 1. ice_notify_vf_reset() informs IAVF driver that reset is needed and IAVF schedules its own reset procedure 2. Bit ICE_VF_STATE_DIS is set in vf->vf_state 3. Misc initialization steps 4. ice_sriov_post_vsi_rebuild() -> ice_vf_set_initialized() and that clears ICE_VF_STATE_DIS in vf->vf_state Step 3 is mentioned race window because IAVF reset procedure runs in parallel and one of its step is sending of VIRTCHNL_OP_GET_VF_RESOURCES message (opcode==3). This message is handled in ice_vc_process_vf_msg() and if it is received during the mentioned race window then it's marked as invalid and error is returned to VF driver. Protect vf_state check in ice_vc_process_vf_msg() by cfg_lock to avoid this race condition. Fixes: e6ba5273d4ed ("ice: Fix race conditions between virtchnl handling and VF ndo ops") Tested-by: Fei Liu <feliu@redhat.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-26ice: Fix incorrect locking in ice_vc_process_vf_msg()Ivan Vecera1-14/+7
Usage of mutex_trylock() in ice_vc_process_vf_msg() is incorrect because message sent from VF is ignored and never processed. Use mutex_lock() instead to fix the issue. It is safe because this mutex is used to prevent races between VF related NDOs and handlers processing request messages from VF and these handlers are running in ice_service_task() context. Additionally move this mutex lock prior ice_vc_is_opcode_allowed() call to avoid potential races during allowlist access. Fixes: e6ba5273d4ed ("ice: Fix race conditions between virtchnl handling and VF ndo ops") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.