aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2020-12-01net: hns3: add more info to hns3_dbg_bd_info()Huazhong Tan1-10/+40
Since TX hardware checksum and RX completion checksum have been supported now, so add related information in hns3_dbg_bd_info(). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01net: hns3: add udp tunnel checksum segmentation supportHuazhong Tan8-8/+33
For the device who has the capability to handle udp tunnel checksum segmentation, add support for it. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01net: hns3: remove unsupported NETIF_F_GSO_UDP_TUNNEL_CSUMHuazhong Tan1-19/+5
Currently, device V1 and V2 do not support segmentation offload for UDP based tunnel packet who needs outer UDP checksum offload, so there is a workaround in the driver to set the checksum of the outer UDP checksum as zero. This is not what the user wants, so remove this feature for device V1 and V2, add support for it later(when the device has the ability to do that). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01net: hns3: add support for TX hardware checksum offloadHuazhong Tan8-18/+74
For the device that supports TX hardware checksum, the hardware can calculate the checksum from the start and fill the checksum to the offset position, which reduces the operations of calculating the type and header length of L3/L4. So add this feature for the HNS3 ethernet driver. The previous simple BD description is unsuitable, rename it as HW TX CSUM. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01net: hns3: add support for RX completion checksumHuazhong Tan3-0/+29
In some cases (for example ip fragment), hardware will calculate the checksum of whole packet in RX, and setup the HNS3_RXD_L2_CSUM_B flag in the descriptor, so add support to utilize this checksum. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01net: broadcom CNIC: requires MMURandy Dunlap1-0/+1
The CNIC kconfig symbol selects UIO and UIO depends on MMU. Since 'select' does not follow dependency chains, add the same MMU dependency to CNIC. Quietens this kconfig warning: WARNING: unmet direct dependencies detected for UIO Depends on [n]: MMU [=n] Selected by [m]: - CNIC [=m] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_BROADCOM [=y] && PCI [=y] && (IPV6 [=m] || IPV6 [=m]=n) Fixes: adfc5217e9db ("broadcom: Move the Broadcom drivers") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Rasesh Mody <rmody@marvell.com> Cc: GR-Linux-NIC-Dev@marvell.com Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20201129070843.3859-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01ibmvnic: Fix TX completion error handlingThomas Falcon1-3/+1
TX completions received with an error return code are not being processed properly. When an error code is seen, do not proceed to the next completion before cleaning up the existing entry's data structures. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-01ibmvnic: Ensure that SCRQ entry reads are correctly orderedThomas Falcon1-0/+18
Ensure that received Subordinate Command-Response Queue (SCRQ) entries are properly read in order by the driver. These queues are used in the ibmvnic device to process RX buffer and TX completion descriptors. dma_rmb barriers have been added after checking for a pending descriptor to ensure the correct descriptor entry is checked and after reading the SCRQ descriptor to ensure the entire descriptor is read before processing. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-11-30chelsio/chtls: fix panic during unload reload chtlsVinay Kumar Yadav1-0/+1
there is kernel panic in inet_twsk_free() while chtls module unload when socket is in TIME_WAIT state because sk_prot_creator was not preserved on connection socket. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Udai Sharma <udai.sharma@chelsio.com> Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Link: https://lore.kernel.org/r/20201125214913.16938-1-vinay.yadav@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30dpaa_eth: implement the A050385 erratum workaround for XDPCamelia Groza1-2/+82
For XDP TX, even tough we start out with correctly aligned buffers, the XDP program might change the data's alignment. For REDIRECT, we have no control over the alignment either. Create a new workaround for xdp_frame structures to verify the erratum conditions and move the data to a fresh buffer if necessary. Create a new xdp_frame for managing the new buffer and free the old one using the XDP API. Due to alignment constraints, all frames have a 256 byte headroom that is offered fully to XDP under the erratum. If the XDP program uses all of it, the data needs to be move to make room for the xdpf backpointer. Disable the metadata support since the information can be lost. Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30dpaa_eth: rename current skb A050385 erratum workaroundCamelia Groza1-2/+2
Explicitly point that the current workaround addresses skbs. This change is in preparation for adding a workaround for XDP scenarios. Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30dpaa_eth: add XDP_REDIRECT supportCamelia Groza2-1/+48
After transmission, the frame is returned on confirmation queues for cleanup. For this, store a backpointer to the xdp_frame in the private reserved area at the start of the TX buffer. No TX batching support is implemented at this time. Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30dpaa_eth: add XDP_TX supportCamelia Groza2-5/+126
Use an xdp_frame structure for managing the frame. Store a backpointer to the structure at the start of the buffer before enqueueing for cleanup on TX confirmation. Reserve DPAA_TX_PRIV_DATA_SIZE bytes from the frame size shared with the XDP program for this purpose. Use the XDP API for freeing the buffer when it returns to the driver on the TX confirmation path. The frame queues are shared with the netstack. The DPAA driver is a LLTX driver so no explicit locking is required on transmission. This approach will be reused for XDP REDIRECT. Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30dpaa_eth: limit the possible MTU range when XDP is enabledCamelia Groza1-8/+31
Implement the ndo_change_mtu callback to prevent users from setting an MTU that would permit processing of S/G frames. The maximum MTU size is dependent on the buffer size. Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30dpaa_eth: add basic XDP supportCamelia Groza2-16/+153
Implement the XDP_DROP and XDP_PASS actions. Avoid draining and reconfiguring the buffer pool at each XDP setup/teardown by increasing the frame headroom and reserving XDP_PACKET_HEADROOM bytes from the start. Since we always reserve an entire page per buffer, this change only impacts Jumbo frame scenarios where the maximum linear frame size is reduced by 256 bytes. Multi buffer Scatter/Gather frames are now used instead in these scenarios. Allow XDP programs to access the entire buffer. The data in the received frame's headroom can be overwritten by the XDP program. Extract the relevant fields from the headroom while they are still available, before running the XDP program. Since the headroom might be resized before the frame is passed up to the stack, remove the check for a fixed headroom value when building an skb. Allow the meta data to be updated and pass the information up the stack. Scatter/Gather frames are dropped when XDP is enabled. Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30dpaa_eth: add struct for software backpointersCamelia Groza2-7/+17
We maintain an skb backpointer in the software annotations area of Tx frames. Introduce a structure for explicit handling. Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01xsk: Propagate napi_id to XDP socket Rx pathBjörn Töpel19-21/+21
Add napi_id to the xdp_rxq_info structure, and make sure the XDP socket pick up the napi_id in the Rx path. The napi_id is used to find the corresponding NAPI structure for socket busy polling. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/bpf/20201130185205.196029-7-bjorn.topel@gmail.com
2020-11-28ibmvnic: reduce wait for completion timeDany Madden1-3/+3
Reduce the wait time for Command Response Queue response from 30 seconds to 20 seconds, as recommended by VIOS and Power Hypervisor teams. Fixes: bd0b672313941 ("ibmvnic: Move login and queue negotiation into ibmvnic_open") Fixes: 53da09e92910f ("ibmvnic: Add set_link_state routine for setting adapter link state") Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-28ibmvnic: no reset timeout for 5 seconds after resetDany Madden2-2/+11
Reset timeout is going off right after adapter reset. This patch ensures that timeout is scheduled if it has been 5 seconds since the last reset. 5 seconds is the default watchdog timeout. Fixes: ed651a10875f1 ("ibmvnic: Updated reset handling") Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-28ibmvnic: send_login should check for crq errorsDany Madden1-6/+12
send_login() does not check for the result of ibmvnic_send_crq() of the login request. This results in the driver needlessly retrying the login 10 times even when CRQ is no longer active. Check the return code and give up in case of errors in sending the CRQ. The only time we want to retry is if we get a PARITALSUCCESS response from the partner. Fixes: 032c5e82847a2 ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-28ibmvnic: track pending loginSukadev Bhattiprolu2-0/+18
If after ibmvnic sends a LOGIN it gets a FAILOVER, it is possible that the worker thread will start reset process and free the login response buffer before it gets a (now stale) LOGIN_RSP. The ibmvnic tasklet will then try to access the login response buffer and crash. Have ibmvnic track pending logins and discard any stale login responses. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-28ibmvnic: delay next reset if hard reset failsSukadev Bhattiprolu1-0/+8
If auto-priority failover is enabled, the backing device needs time to settle if hard resetting fails for any reason. Add a delay of 60 seconds before retrying the hard-reset. Fixes: 2770a7984db5 ("ibmvnic: Introduce hard reset recovery") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-28ibmvnic: restore adapter state on failed resetDany Madden1-31/+36
In a failed reset, driver could end up in VNIC_PROBED or VNIC_CLOSED state and cannot recover in subsequent resets, leaving it offline. This patch restores the adapter state to reset_state, the original state when reset was called. Fixes: b27507bb59ed5 ("net/ibmvnic: unlock rtnl_lock in reset so linkwatch_event can run") Fixes: 2770a7984db58 ("ibmvnic: Introduce hard reset recovery") Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-28ibmvnic: avoid memset null scrq msgsDany Madden1-4/+15
scrq->msgs could be NULL during device reset, causing Linux to crash. So, check before memset scrq->msgs. Fixes: c8b2ad0a4a901 ("ibmvnic: Sanitize entire SCRQ buffer on reset") Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-28ibmvnic: stop free_all_rwi on failed resetDany Madden1-19/+3
When ibmvnic fails to reset, it breaks out of the reset loop and frees all of the remaining resets from the workqueue. Doing so prevents the adapter from recovering if no reset is scheduled after that. Instead, have the driver continue to process resets on the workqueue. Remove the no longer need free_all_rwi(). Fixes: ed651a10875f1 ("ibmvnic: Updated reset handling") Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-28ibmvnic: handle inconsistent login with resetDany Madden1-1/+1
Inconsistent login with the vnicserver is causing the device to be removed. This does not give the device a chance to recover from error state. This patch schedules a FATAL reset instead to bring the adapter up. Fixes: 032c5e82847a2 ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski15-162/+149
Trivial conflict in CAN, keep the net-next + the byteswap wrapper. Conflicts: drivers/net/can/usb/gs_usb.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27mlxsw: spectrum_router: Update adjacency index more efficientlyIdo Schimmel1-18/+10
The device supports an operation that allows the driver to issue one request to update the adjacency index for all the routes in a given virtual router (VR) from old index and size to new ones. This is useful in case the configuration of a certain nexthop group is updated and its adjacency index changes. Currently, the driver does not use this operation in an efficient manner. It iterates over all the routes using the nexthop group and issues an update request for the VR if it is not the same as the previous VR. Instead, use the VR tracking added in the previous patch to update the adjacency index once for each VR currently using the nexthop group. Example: 8k IPv6 routes were added in an alternating manner to two VRFs. All the routes are using the same nexthop object ('nhid 1'). Before: # perf stat -e devlink:devlink_hwmsg --filter='incoming==0' -- ip nexthop replace id 1 via 2001:db8:1::2 dev swp3 Performance counter stats for 'ip nexthop replace id 1 via 2001:db8:1::2 dev swp3': 16,385 devlink:devlink_hwmsg 4.255933213 seconds time elapsed 0.000000000 seconds user 0.666923000 seconds sys Number of EMAD transactions corresponds to number of routes using the nexthop group. After: # perf stat -e devlink:devlink_hwmsg --filter='incoming==0' -- ip nexthop replace id 1 via 2001:db8:1::2 dev swp3 Performance counter stats for 'ip nexthop replace id 1 via 2001:db8:1::2 dev swp3': 3 devlink:devlink_hwmsg 0.077655094 seconds time elapsed 0.000000000 seconds user 0.076698000 seconds sys Number of EMAD transactions corresponds to number of VRFs / VRs. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27mlxsw: spectrum_router: Track nexthop group virtual router membershipIdo Schimmel1-0/+164
For each nexthop group, track in which virtual routers (VRs) the group is used. This is going to be used by the next patch to perform a more efficient adjacency index update whenever the group's adjacency index changes. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27mlxsw: spectrum_router: Rollback virtual router adjacency pointer updateIdo Schimmel1-1/+14
In the rare case where the adjacency pointer cannot be updated for a given virtual router, rollback the operation so that virtual routers that are already using the new index will use the old one again. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27mlxsw: spectrum_router: Pass virtual router parameters directly instead of pointerIdo Schimmel1-4/+6
mlxsw_sp_adj_index_mass_update_vr() only needs the virtual router's identifier and protocol, so pass them directly. In a subsequent patch the caller will not have access to the pointer. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27mlxsw: spectrum_router: Fix error handling issueIdo Schimmel1-4/+2
Return error to the caller instead of suppressing it. Fixes: e3ddfb45bacd ("mlxsw: spectrum_router: Allow returning errors from mlxsw_sp_nexthop_group_refresh()") Addresses-Coverity: ("Error handling issues (CHECKED_RETURN)") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27Merge branch 'linus' into sched/core, to resolve semantic conflictIngo Molnar97-633/+1208
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-11-26net/mlx5: Treat host PF vport as other (non eswitch manager) vportParav Pandit3-41/+32
When eswitch manager is running on ECPF, host PF should be treated as non eswitch manager port, similar to other VF vports. Fail to do so, results in firmware treating PF's vport as ECPF vport for eswitch ACL tables. Non zero check to figure out if a given vport is other vport or not is not sufficient becase PF vport number = 0 on ECPF. Hence, create esw acl tables with an attribute of other vport. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-26net/mlx5: Enable host PF HCA after eswitch is initializedParav Pandit4-19/+66
Currently ECPF enables external host PF too early in the initialization sequence for Ethernet links when ECPF is eswitch manager. Due to this, when external host PF driver is loaded, host PF's HCA CAP has inner_ip_version supported by NIC RX flow table. This capability is later updated by firmware after ECPF driver enables ENCAP/DECAP as eswitch manager. This results into a timing race condition, where CREATE_TIR command fails with a below syndrome on host PF. mlx5_cmd_check:775:(pid 510): CREATE_TIR(0x900) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x562b00) Hence, enable the external host PF after necessary eswitch and per vport initialization is completed. Continue to enable host PF when eswitch manager capability is off for a ECPF. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Bodong Wang <bodong@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-26net/mlx5: Rename peer_pf to host_pfParav Pandit2-24/+39
To match the hardware spec, rename peer_pf to host_pf. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Bodong Wang <bodong@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-26net/mlx5: Export steering related functionsEli Cohen1-0/+3
Export mlx5_create_flow_table() mlx5_create_flow_group() mlx5_destroy_flow_group(). These symbols are required by the VDPA implementation to create rules that consume VDPA specific traffic. We do not deal with putting the prototypes in a header file since they already exist in include/linux/mlx5/fs.h. Signed-off-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-26net/mlx5: Update the list of the PCI supported devicesMeir Lichtinger1-0/+1
Add the upcoming BlueField-3 device ID. Signed-off-by: Meir Lichtinger <meirl@nvidia.com> Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-26net/mlx5: Avoid exposing driver internal command helpersParav Pandit2-3/+4
mlx5 command init and cleanup routines are internal to mlx5_core driver. Hence, avoid exporting them and move their definition to mlx5_core driver's internal file mlx5_core.h Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-26net/mlx5: Add misc4 to mlx5_ifc_fte_match_param_bitsMuhammad Sammar1-1/+1
Add misc4 match params to enable matching on prog_sample_fields. Signed-off-by: Muhammad Sammar <muhammads@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-26net/mlx5: Check dr mask size against mlx5_match_param sizeMuhammad Sammar3-3/+3
This is to allow passing misc4 match param from userspace when function like ib_flow_matcher_create is called. Signed-off-by: Muhammad Sammar <muhammads@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-26net/mlx5: Add sampler destination typeChris Mi2-0/+6
The flow sampler object is a new destination type. Add a new member for the flow destination. Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-25Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski3-5/+5
Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2020-11-24 This series contains updates to i40e and igbvf drivers. Marek removes a redundant assignment for i40e. Stefan Assmann corrects reporting of VF link speed for i40e. Karen revises a couple of error messages to warnings for igbvf as they could be misinterpreted as issues when they are not. v2: Dropped PTP patch as it's being updated. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: igbvf: Refactor traces i40e: report correct VF link speed when link state is set to enable i40e: remove redundant assignment ==================== Link: https://lore.kernel.org/r/20201124165245.2844118-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25ch_ktls: lock is not freedRohit Maheshwari1-1/+3
Currently lock gets freed only if timeout expires, but missed a case when HW returns failure and goes for cleanup. Fixes: efca3878a5fb ("ch_ktls: Issue if connection offload fails") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Link: https://lore.kernel.org/r/20201125072626.10861-1-rohitm@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25enetc: Let the hardware auto-advance the taprio base-time of 0Vladimir Oltean1-12/+2
The tc-taprio base time indicates the beginning of the tc-taprio schedule, which is cyclic by definition (where the length of the cycle in nanoseconds is called the cycle time). The base time is a 64-bit PTP time in the TAI domain. Logically, the base-time should be a future time. But that imposes some restrictions to user space, which has to retrieve the current PTP time from the NIC first, then calculate a base time that will still be larger than the base time by the time the kernel driver programs this value into the hardware. Actually ensuring that the programmed base time is in the future is still a problem even if the kernel alone deals with this. Luckily, the enetc hardware already advances a base-time that is in the past into a congruent time in the immediate future, according to the same formula that can be found in the software implementation of taprio (in taprio_get_start_time): /* Schedule the start time for the beginning of the next * cycle. */ n = div64_s64(ktime_sub_ns(now, base), cycle); *start = ktime_add_ns(base, (n + 1) * cycle); There's only one problem: the driver doesn't let the hardware do that. It interferes with the base-time passed from user space, by special-casing the situation when the base-time is zero, and replaces that with the current PTP time. This changes the intended effective base-time of the schedule, which will in the end have a different phase offset than if the base-time of 0.000000000 was to be advanced by an integer multiple of the cycle-time. Fixes: 34c6adf1977b ("enetc: Configure the Time-Aware Scheduler via tc-taprio offload") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20201124220259.3027991-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25mlxsw: spectrum_ptp: use PTP wide message type definitionsChristian Eggers2-11/+4
Use recently introduced PTP wide defines instead of a driver internal enumeration. Signed-off-by: Christian Eggers <ceggers@arri.de> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Cc: Petr Machata <petrm@mellanox.com> Cc: Jiri Pirko <jiri@nvidia.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25net: stmmac: fix incorrect merge of patch upstreamAntonio Borneo1-1/+1
Commit 757926247836 ("net: stmmac: add flexible PPS to dwmac 4.10a") was intended to modify the struct dwmac410_ops, but it got somehow badly merged and modified the struct dwmac4_ops. Revert the modification in struct dwmac4_ops and re-apply it properly in struct dwmac410_ops. Fixes: 757926247836 ("net: stmmac: add flexible PPS to dwmac 4.10a") Signed-off-by: Antonio Borneo <antonio.borneo@st.com> Reported-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.kernel.org/r/20201124223729.886992-1-antonio.borneo@st.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-24ibmvnic: enhance resetting status check during module exitLijun Pan2-4/+2
Based on the discussion with Sukadev Bhattiprolu and Dany Madden, we believe that checking adapter->resetting bit is preferred since RESETTING state flag is not as strict as resetting bit. RESETTING state flag is removed since it is verbose now. Fixes: 7d7195a026ba ("ibmvnic: Do not process device remove during device reset") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-24ibmvnic: fix NULL pointer dereference in ibmvic_reset_crqLijun Pan1-0/+3
crq->msgs could be NULL if the previous reset did not complete after freeing crq->msgs. Check for NULL before dereferencing them. Snippet of call trace: ... ibmvnic 30000003 env3 (unregistering): Releasing sub-CRQ ibmvnic 30000003 env3 (unregistering): Releasing CRQ BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc0000000000c1a30 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: ibmvnic(E-) rpadlpar_io rpaphp xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables xsk_diag tcp_diag udp_diag tun raw_diag inet_diag unix_diag bridge af_packet_diag netlink_diag stp llc rfkill sunrpc pseries_rng xts vmx_crypto uio_pdrv_genirq uio binfmt_misc ip_tables xfs libcrc32c sd_mod t10_pi sg ibmvscsi ibmveth scsi_transport_srp dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ibmvnic] CPU: 20 PID: 8426 Comm: kworker/20:0 Tainted: G E 5.10.0-rc1+ #12 Workqueue: events __ibmvnic_reset [ibmvnic] NIP: c0000000000c1a30 LR: c008000001b00c18 CTR: 0000000000000400 REGS: c00000000d05b7a0 TRAP: 0380 Tainted: G E (5.10.0-rc1+) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 44002480 XER: 20040000 CFAR: c0000000000c19ec IRQMASK: 0 GPR00: 0000000000000400 c00000000d05ba30 c008000001b17c00 0000000000000000 GPR04: 0000000000000000 0000000000000000 0000000000000000 00000000000001e2 GPR08: 000000000001f400 ffffffffffffd950 0000000000000000 c008000001b0b280 GPR12: c0000000000c19c8 c00000001ec72e00 c00000000019a778 c00000002647b440 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000006 0000000000000001 0000000000000003 0000000000000002 GPR24: 0000000000001000 c008000001b0d570 0000000000000005 c00000007ab5d550 GPR28: c00000007ab5c000 c000000032fcf848 c00000007ab5cc00 c000000032fcf800 NIP [c0000000000c1a30] memset+0x68/0x104 LR [c008000001b00c18] ibmvnic_reset_crq+0x70/0x110 [ibmvnic] Call Trace: [c00000000d05ba30] [0000000000000800] 0x800 (unreliable) [c00000000d05bab0] [c008000001b0a930] do_reset.isra.40+0x224/0x634 [ibmvnic] [c00000000d05bb80] [c008000001b08574] __ibmvnic_reset+0x17c/0x3c0 [ibmvnic] [c00000000d05bc50] [c00000000018d9ac] process_one_work+0x2cc/0x800 [c00000000d05bd20] [c00000000018df58] worker_thread+0x78/0x520 [c00000000d05bdb0] [c00000000019a934] kthread+0x1c4/0x1d0 [c00000000d05be20] [c00000000000d5d0] ret_from_kernel_thread+0x5c/0x6c Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-24ibmvnic: fix NULL pointer dereference in reset_sub_crq_queuesLijun Pan1-0/+3
adapter->tx_scrq and adapter->rx_scrq could be NULL if the previous reset did not complete after freeing sub crqs. Check for NULL before dereferencing them. Snippet of call trace: ibmvnic 30000006 env6: Releasing sub-CRQ ibmvnic 30000006 env6: Releasing CRQ ... ibmvnic 30000006 env6: Got Control IP offload Response ibmvnic 30000006 env6: Re-setting tx_scrq[0] BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc008000003dea7cc Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables xsk_diag tcp_diag udp_diag raw_diag inet_diag unix_diag af_packet_diag netlink_diag tun bridge stp llc rfkill sunrpc pseries_rng xts vmx_crypto uio_pdrv_genirq uio binfmt_misc ip_tables xfs libcrc32c sd_mod t10_pi sg ibmvscsi ibmvnic ibmveth scsi_transport_srp dm_mirror dm_region_hash dm_log dm_mod CPU: 80 PID: 1856 Comm: kworker/80:2 Tainted: G W 5.8.0+ #4 Workqueue: events __ibmvnic_reset [ibmvnic] NIP: c008000003dea7cc LR: c008000003dea7bc CTR: 0000000000000000 REGS: c0000007ef7db860 TRAP: 0380 Tainted: G W (5.8.0+) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28002422 XER: 0000000d CFAR: c000000000bd9520 IRQMASK: 0 GPR00: c008000003dea7bc c0000007ef7dbaf0 c008000003df7400 c0000007fa26ec00 GPR04: c0000007fcd0d008 c0000007fcd96350 0000000000000027 c0000007fcd0d010 GPR08: 0000000000000023 0000000000000000 0000000000000000 0000000000000000 GPR12: 0000000000002000 c00000001ec18e00 c0000000001982f8 c0000007bad6e840 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 fffffffffffffef7 GPR24: 0000000000000402 c0000007fa26f3a8 0000000000000003 c00000016f8ec048 GPR28: 0000000000000000 0000000000000000 0000000000000000 c0000007fa26ec00 NIP [c008000003dea7cc] ibmvnic_reset_init+0x15c/0x258 [ibmvnic] LR [c008000003dea7bc] ibmvnic_reset_init+0x14c/0x258 [ibmvnic] Call Trace: [c0000007ef7dbaf0] [c008000003dea7bc] ibmvnic_reset_init+0x14c/0x258 [ibmvnic] (unreliable) [c0000007ef7dbb80] [c008000003de8860] __ibmvnic_reset+0x408/0x970 [ibmvnic] [c0000007ef7dbc50] [c00000000018b7cc] process_one_work+0x2cc/0x800 [c0000007ef7dbd20] [c00000000018bd78] worker_thread+0x78/0x520 [c0000007ef7dbdb0] [c0000000001984c4] kthread+0x1d4/0x1e0 [c0000007ef7dbe20] [c00000000000cea8] ret_from_kernel_thread+0x5c/0x74 Fixes: 57a49436f4e8 ("ibmvnic: Reset sub-crqs during driver reset") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.