aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2020-11-17octeontx2-af: Generate key field bit mask from KEX profileSubbaraya Sundeep5-3/+658
Key Extraction(KEX) profile decides how the packet metadata such as layer information and selected packet data bytes at each layer are placed in MCAM search key. This patch reads the configured KEX profile parameters to find out the bit position and bit mask for each field. The information is used when programming the MCAM match data by SW to match a packet flow and take appropriate action on the flow. This patch also verifies the mandatory fields such as channel and DMAC are not overwritten by the KEX configuration of other fields. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17octeontx2-af: Verify MCAM entry channel and PF_FUNCSubbaraya Sundeep3-2/+82
This patch adds support to verify the channel number sent by mailbox requester before writing MCAM entry for Ingress packets. Similarly for Egress packets, verifying the PF_FUNC sent by the mailbox user. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Kiran Kumar K <kirankumark@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17octeontx2-af: Modify default KEX profile to extract TX packet fieldsStanislaw Kardach3-14/+120
The current default Key Extraction(KEX) profile can only use RX packet fields while generating the MCAM search key. The profile can't be used for matching TX packet fields. This patch modifies the default KEX profile to add support for extracting TX packet fields into MCAM search key. Enabled Tx KPU packet parsing by configuring TX PKIND in tx_parse_cfg. Modified the KEX profile to extract 2 bytes of VLAN TCI from an offset of 2 bytes from LB_PTR. The LB_PTR points to the byte offset where the VLAN header starts. The NPC KPU parser profile has been modified to point LB_PTR to the starting byte offset of VLAN header which points to the tpid field. Signed-off-by: Stanislaw Kardach <skardach@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17i40e: Use batched xsk Tx interfaces to increase performanceMagnus Karlsson4-33/+110
Use the new batched xsk interfaces for the Tx path in the i40e driver to improve performance. On my machine, this yields a throughput increase of 4% for the l2fwd sample app in xdpsock. If we instead just look at the Tx part, this patch set increases throughput with above 20% for Tx. Note that I had to explicitly loop unroll the inner loop to get to this performance level, by using a pragma. It is honored by both clang and gcc and should be ignored by versions that do not support it. Using the -funroll-loops compiler command line switch on the source file resulted in a loop unrolling on a higher level that lead to a performance decrease instead of an increase. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/1605525167-14450-6-git-send-email-magnus.karlsson@gmail.com
2020-11-17i40e: Remove unnecessary sw_ring access from xsk TxMagnus Karlsson1-5/+1
Remove the unnecessary access to the software ring for the AF_XDP zero-copy driver. This was used to record the length of the packet so that the driver Tx completion code could sum this up to produce the total bytes sent. This is now performed during the transmission of the packet, so no need to record this in the software ring. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/1605525167-14450-3-git-send-email-magnus.karlsson@gmail.com
2020-11-17enetc: Workaround for MDIO register access issueAlex Marginean4-25/+161
Due to a hardware issue, an access to MDIO registers that is concurrent with other ENETC register accesses may lead to the MDIO access being dropped or corrupted. The workaround introduces locking for all register accesses to the ENETC register space. To reduce performance impact, a readers-writers locking scheme has been implemented. The writer in this case is the MDIO access code (irrelevant whether that MDIO access is a register read or write), and the reader is any access code to non-MDIO ENETC registers. Also, the datapath functions acquire the read lock fewer times and use _hot accessors. All the rest of the code uses the _wa accessors which lock every register access. The commit introducing MDIO support is - commit ebfcb23d62ab ("enetc: Add ENETC PF level external MDIO support") but due to subsequent refactoring this patch is applicable on top of a later commit. Fixes: 6517798dd343 ("enetc: Make MDIO accessors more generic and export to include/linux/fsl") Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20201112182608.26177-1-claudiu.manoil@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net/mlx5: fix error return code in mlx5e_tc_nic_init()Wang Hai1-1/+3
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: aedd133d17bc ("net/mlx5e: Support CT offload for tc nic flows") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-17net/mlx5: E-Switch, Fail mlx5_esw_modify_vport_rate if qos disabledEli Cohen1-0/+4
Avoid calling mlx5_esw_modify_vport_rate() if qos is not enabled and avoid unnecessary syndrome messages from firmware. Fixes: fcb64c0f5640 ("net/mlx5: E-Switch, add ingress rate support") Signed-off-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-17net/mlx5: Disable QoS when min_rates on all VFs are zeroVladyslav Tarasiuk1-7/+8
Currently when QoS is enabled for VF and any min_rate is configured, the driver sets bw_share value to at least 1 and doesn’t allow to set it to 0 to make minimal rate unlimited. It means there is always a minimal rate configured for every VF, even if user tries to remove it. In order to make QoS disable possible, check whether all vports have configured min_rate = 0. If this is true, set their bw_share to 0 to disable min_rate limitations. Fixes: c9497c98901c ("net/mlx5: Add support for setting VF min rate") Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-17net/mlx5: Clear bw_share upon VF disableVladyslav Tarasiuk1-0/+1
Currently, if user disables VFs with some min and max rates configured, they are cleared. But QoS data is not cleared and restored upon next VF enable placing limits on minimal rate for given VF, when user expects none. To match cleared vport->info struct with QoS-related min and max rates upon VF disable, clear vport->qos struct too. Fixes: 556b9d16d3f5 ("net/mlx5: Clear VF's configuration on disabling SRIOV") Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-17net/mlx5: Add handling of port type in rule deletionMichael Guralnik1-0/+7
Handle destruction of rules with port destination type to enable full destruction of flow. Without this handling of TX rules the deletion of these rules fails. Dmesg of flow destruction failure: [ 203.714146] mlx5_core 0000:00:0b.0: mlx5_cmd_check:753:(pid 342): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x144b7a) [ 210.547387] ------------[ cut here ]------------ [ 210.548663] refcount_t: decrement hit 0; leaking memory. [ 210.550651] WARNING: CPU: 4 PID: 342 at lib/refcount.c:31 refcount_warn_saturate+0x5c/0x110 [ 210.550654] Modules linked in: mlx5_ib mlx5_core ib_ipoib rdma_ucm rdma_cm iw_cm ib_cm ib_umad ib_uverbs ib_core [ 210.550675] CPU: 4 PID: 342 Comm: test Not tainted 5.8.0-rc2+ #116 [ 210.550678] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 210.550680] RIP: 0010:refcount_warn_saturate+0x5c/0x110 [ 210.550685] Code: c6 d1 1b 01 00 0f 84 ad 00 00 00 5b 5d c3 80 3d b5 d1 1b 01 00 75 f4 48 c7 c7 20 d1 15 82 c6 05 a5 d1 1b 01 01 e8 a7 eb af ff <0f> 0b eb dd 80 3d 99 d1 1b 01 00 75 d4 48 c7 c7 c0 cf 15 82 c6 05 [ 210.550687] RSP: 0018:ffff8881642e77e8 EFLAGS: 00010282 [ 210.550691] RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000000000 [ 210.550694] RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffffed102c85ceef [ 210.550696] RBP: ffff888161720428 R08: ffffffff8124c10e R09: ffffed103243beae [ 210.550698] R10: ffff8881921df56b R11: ffffed103243bead R12: ffff8881841b4180 [ 210.550701] R13: ffff888161720428 R14: ffff8881616d0000 R15: ffff888161720380 [ 210.550704] FS: 00007fc27f025740(0000) GS:ffff888192000000(0000) knlGS:0000000000000000 [ 210.550706] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 210.550708] CR2: 0000557e4b41a6a0 CR3: 0000000002415004 CR4: 0000000000360ea0 [ 210.550711] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 210.550713] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 210.550715] Call Trace: [ 210.550717] mlx5_del_flow_rules+0x484/0x490 [mlx5_core] [ 210.550720] ? mlx5_cmd_set_fte+0xa80/0xa80 [mlx5_core] [ 210.550722] mlx5_ib_destroy_flow+0x17f/0x280 [mlx5_ib] [ 210.550724] uverbs_free_flow+0x4c/0x90 [ib_uverbs] [ 210.550726] destroy_hw_idr_uobject+0x41/0xb0 [ib_uverbs] [ 210.550728] uverbs_destroy_uobject+0xaa/0x390 [ib_uverbs] [ 210.550731] __uverbs_cleanup_ufile+0x129/0x1b0 [ib_uverbs] [ 210.550733] ? uverbs_destroy_uobject+0x390/0x390 [ib_uverbs] [ 210.550735] uverbs_destroy_ufile_hw+0x78/0x190 [ib_uverbs] [ 210.550737] ib_uverbs_close+0x36/0x140 [ib_uverbs] [ 210.550739] __fput+0x181/0x380 [ 210.550741] task_work_run+0x88/0xd0 [ 210.550743] do_exit+0x5f6/0x13b0 [ 210.550745] ? sched_clock_cpu+0x30/0x140 [ 210.550747] ? is_current_pgrp_orphaned+0x70/0x70 [ 210.550750] ? lock_downgrade+0x360/0x360 [ 210.550752] ? mark_held_locks+0x1d/0x90 [ 210.550754] do_group_exit+0x8a/0x140 [ 210.550756] get_signal+0x20a/0xf50 [ 210.550758] do_signal+0x8c/0xbe0 [ 210.550760] ? hrtimer_nanosleep+0x1d8/0x200 [ 210.550762] ? nanosleep_copyout+0x50/0x50 [ 210.550764] ? restore_sigcontext+0x320/0x320 [ 210.550766] ? __hrtimer_init+0xf0/0xf0 [ 210.550768] ? timespec64_add_safe+0x150/0x150 [ 210.550770] ? mark_held_locks+0x1d/0x90 [ 210.550772] ? lockdep_hardirqs_on_prepare+0x14c/0x240 [ 210.550774] __prepare_exit_to_usermode+0x119/0x170 [ 210.550776] do_syscall_64+0x65/0x300 [ 210.550778] ? trace_hardirqs_off+0x10/0x120 [ 210.550781] ? mark_held_locks+0x1d/0x90 [ 210.550783] ? asm_sysvec_apic_timer_interrupt+0xa/0x20 [ 210.550785] ? lockdep_hardirqs_on+0x112/0x190 [ 210.550787] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 210.550789] RIP: 0033:0x7fc27f1cd157 [ 210.550791] Code: Bad RIP value. [ 210.550793] RSP: 002b:00007ffd4db27ea8 EFLAGS: 00000246 ORIG_RAX: 0000000000000023 [ 210.550798] RAX: fffffffffffffdfc RBX: ffffffffffffff80 RCX: 00007fc27f1cd157 [ 210.550800] RDX: 00007fc27f025740 RSI: 00007ffd4db27eb0 RDI: 00007ffd4db27eb0 [ 210.550803] RBP: 0000000000000016 R08: 0000000000000000 R09: 000000000000000e [ 210.550805] R10: 00007ffd4db27dc7 R11: 0000000000000246 R12: 0000000000400c00 [ 210.550808] R13: 00007ffd4db285f0 R14: 0000000000000000 R15: 0000000000000000 [ 210.550809] irq event stamp: 49399 [ 210.550812] hardirqs last enabled at (49399): [<ffffffff81172d36>] console_unlock+0x556/0x6f0 [ 210.550815] hardirqs last disabled at (49398): [<ffffffff81172897>] console_unlock+0xb7/0x6f0 [ 210.550818] softirqs last enabled at (48706): [<ffffffff81e0037b>] __do_softirq+0x37b/0x60c [ 210.550820] softirqs last disabled at (48697): [<ffffffff81c00e2f>] asm_call_on_stack+0xf/0x20 [ 210.550822] ---[ end trace ad18c0e6fa846454 ]--- [ 210.581862] mlx5_core 0000:00:0c.0: mlx5_destroy_flow_table:2132:(pid 342): Flow table 262150 wasn't destroyed, refcount > 1 Fixes: a7ee18bdee83 ("RDMA/mlx5: Allow creating a matcher for a NIC TX flow table") Signed-off-by: Michael Guralnik <michaelgur@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-17net/mlx5e: Fix check if netdev is bond slaveMaor Dickman1-1/+1
Bond events handler uses bond_slave_get_rtnl to check if net device is bond slave. bond_slave_get_rtnl return the rcu rx_handler pointer from the netdev which exists for bond slaves but also exists for devices that are attached to linux bridge so using it as indication for bond slave is wrong. Fix by using netif_is_lag_port instead. Fixes: 7e51891a237f ("net/mlx5e: Use netdev events to set/del egress acl forward-to-vport rule") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-17net/mlx5e: Fix IPsec packet drop by mlx5e_tc_update_skbHuy Nguyen4-13/+16
Both TC and IPsec crypto offload use metadata_regB to store private information. Since TC does not use bit 31 of regB, IPsec will use bit 31 as the IPsec packet marker. The IPsec's regB usage is changed to: Bit31: IPsec marker Bit30-24: IPsec syndrome Bit23-0: IPsec obj id Fixes: b2ac7541e377 ("net/mlx5e: IPsec: Add Connect-X IPsec Rx data path offload") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-17net/mlx5e: Set IPsec WAs only in IP's non checksum partial case.Huy Nguyen1-7/+6
The IP's checksum partial still requires L4 csum flag on Ethernet WQE. Make the IPsec WAs only for the IP's non checksum partial case (for example icmd packet) Fixes: 5be019040cb7 ("net/mlx5e: IPsec: Add Connect-X IPsec Tx data path offload") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Alaa Hleihel <alaa@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-17net/mlx5e: Fix refcount leak on kTLS RX resyncMaxim Mikityanskiy1-5/+8
On resync, the driver calls inet_lookup_established (__inet6_lookup_established) that increases sk_refcnt of the socket. To decrease it, the driver set skb->destructor to sock_edemux. However, it didn't work well, because the TCP stack also sets this destructor for early demux, and the refcount gets decreased only once, while increased two times (in mlx5e and in the TCP stack). It leads to a socket leak, a TLS context leak, which in the end leads to calling tls_dev_del twice: on socket close and on driver unload, which in turn leads to a crash. This commit fixes the refcount leak by calling sock_gen_put right away after using the socket, thus fixing all the subsequent issues. Fixes: 0419d8c9d8f8 ("net/mlx5e: kTLS, Add kTLS RX resync support") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-17net: hns3: rename gl_adapt_enable in struct hns3_enet_coalesceHuazhong Tan3-11/+11
Besides GL(Gap Limiting), QL(Quantity Limiting) can be modified dynamically when DIM is supported. So rename gl_adapt_enable as adapt_enable in struct hns3_enet_coalesce. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: hns3: add support for 1us unit GL configurationHuazhong Tan3-4/+31
For device whose version is above V3(include V3), the GL configuration can set as 1us unit, so adds support for configuring this field. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: hns3: add support for querying maximum value of GLHuazhong Tan8-7/+38
For maintainability and compatibility, add support for querying the maximum value of GL. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: hns3: add support for configuring interrupt quantity limitingHuazhong Tan5-18/+105
QL(quantity limiting) means that hardware supports the interrupt coalesce based on the frame quantity. QL can be configured when int_ql_max in device's specification is non-zero, so add support to configure it. Also, rename two coalesce init function to fit their purpose. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: ftgmac100: Fix crash when removing driverJoel Stanley1-0/+4
When removing the driver we would hit BUG_ON(!list_empty(&dev->ptype_specific)) in net/core/dev.c due to still having the NC-SI packet handler registered. # echo 1e660000.ethernet > /sys/bus/platform/drivers/ftgmac100/unbind ------------[ cut here ]------------ kernel BUG at net/core/dev.c:10254! Internal error: Oops - BUG: 0 [#1] SMP ARM CPU: 0 PID: 115 Comm: sh Not tainted 5.10.0-rc3-next-20201111-00007-g02e0365710c4 #46 Hardware name: Generic DT based system PC is at netdev_run_todo+0x314/0x394 LR is at cpumask_next+0x20/0x24 pc : [<806f5830>] lr : [<80863cb0>] psr: 80000153 sp : 855bbd58 ip : 00000001 fp : 855bbdac r10: 80c03d00 r9 : 80c06228 r8 : 81158c54 r7 : 00000000 r6 : 80c05dec r5 : 80c05d18 r4 : 813b9280 r3 : 813b9054 r2 : 8122c470 r1 : 00000002 r0 : 00000002 Flags: Nzcv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none Control: 00c5387d Table: 85514008 DAC: 00000051 Process sh (pid: 115, stack limit = 0x7cb5703d) ... Backtrace: [<806f551c>] (netdev_run_todo) from [<80707eec>] (rtnl_unlock+0x18/0x1c) r10:00000051 r9:854ed710 r8:81158c54 r7:80c76bb0 r6:81158c10 r5:8115b410 r4:813b9000 [<80707ed4>] (rtnl_unlock) from [<806f5db8>] (unregister_netdev+0x2c/0x30) [<806f5d8c>] (unregister_netdev) from [<805a8180>] (ftgmac100_remove+0x20/0xa8) r5:8115b410 r4:813b9000 [<805a8160>] (ftgmac100_remove) from [<805355e4>] (platform_drv_remove+0x34/0x4c) Fixes: bd466c3fb5a4 ("net/faraday: Support NCSI mode") Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201117024448.1170761-1-joel@jms.id.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: b44: fix error return code in b44_init_one()Zhang Changzhong1-1/+2
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 39a6f4bce6b4 ("b44: replace the ssb_dma API with the generic DMA API") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/1605582131-36735-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17lan743x: replace devicetree phy parse code with library functionSven Van Asbroeck2-28/+8
The code in this driver which parses the devicetree to determine the phy/fixed link setup, can be replaced by a single library function: of_phy_get_and_connect(). Behaviour is identical, except that the library function will complain when 'phy-connection-type' is omitted, instead of blindly using PHY_INTERFACE_MODE_NA, which would result in an invalid phy configuration. The library function no longer brings out the exact phy_mode, but the driver doesn't need this, because phy_interface_is_rgmii() queries the phydev directly. Remove 'phy_mode' from the private adapter struct. While we're here, log info about the attached phy on connect, this is useful because the phy type and connection method is now fully configurable via the devicetree. Tested on a lan7430 chip with built-in phy. Verified that adding fixed-link/phy-connection-type in the devicetree results in a fixed-link setup. Used ethtool to verify that the devicetree settings are used. Tested-by: Sven Van Asbroeck <thesven73@gmail.com> # lan7430 Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201116170155.26967-1-TheSven73@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17qed: fix error return code in qed_iwarp_ll2_start()Zhang Changzhong1-3/+9
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 469981b17a4f ("qed: Add unaligned and packed packet processing") Fixes: fcb39f6c10b2 ("qed: Add mpa buffer descriptors for storing and processing mpa fpdus") Fixes: 1e28eaad07ea ("qed: Add iWARP support for fpdu spanned over more than two tcp packets") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Link: https://lore.kernel.org/r/1605532033-27373-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17r8169: remove nr_frags argument from rtl_tx_slots_availHeiner Kallweit1-9/+6
The only time when nr_frags isn't SKB_MAX_FRAGS is when entering rtl8169_start_xmit(). However we can use SKB_MAX_FRAGS also here because when queue isn't stopped there should always be room for MAX_SKB_FRAGS + 1 descriptors. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/3d1f2ad7-31d5-2cac-4f4a-394f8a3cab63@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16bnxt_en: Avoid unnecessary NVM_GET_DEV_INFO cmd error log on VFs.Vasundhara Volam1-0/+3
VFs do not have access permissions to issue NVM_GET_DEV_INFO firmware command. Fixes: 4933f6753b50 ("bnxt_en: Add bnxt_hwrm_nvm_get_dev_info() to query NVM info.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16bnxt_en: Fix counter overflow logic.Michael Chan1-0/+1
bnxt_add_one_ctr() adds a hardware counter to a software counter and adjusts for the hardware counter wraparound against the mask. The logic assumes that the hardware counter is always smaller than or equal to the mask. This assumption is mostly correct. But in some cases if the firmware is older and does not provide the accurate mask, the driver can use a mask that is smaller than the actual hardware mask. This can cause some extra carry bits to be added to the software counter, resulting in counters that far exceed the actual value. Fix it by masking the hardware counter with the mask passed into bnxt_add_one_ctr(). Fixes: fea6b3335527 ("bnxt_en: Accumulate all counters.") Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16bnxt_en: Free port stats during firmware reset.Michael Chan1-1/+2
Firmware is unable to retain the port counters during any kind of fatal or non-fatal resets, so we must clear the port counters to avoid false detection of port counter overflow. Fixes: fea6b3335527 ("bnxt_en: Accumulate all counters.") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16bnxt_en: read EEPROM A2h address using page 0Edwin Peer1-1/+1
The module eeprom address range returned by bnxt_get_module_eeprom() should be 256 bytes of A0h address space, the lower half of the A2h address space, and page 0 for the upper half of the A2h address space. Fix the firmware call by passing page_number 0 for the A2h slave address space. Fixes: 42ee18fe4ca2 ("bnxt_en: Add Support for ETHTOOL_GMODULEINFO and ETHTOOL_GMODULEEEPRO") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16net: qualcomm: rmnet: Fix incorrect receive packet handling during cleanupSubash Abhinov Kasiviswanathan1-0/+5
During rmnet unregistration, the real device rx_handler is first cleared followed by the removal of rx_handler_data after the rcu synchronization. Any packets in the receive path may observe that the rx_handler is NULL. However, there is no check when dereferencing this value to use the rmnet_port information. This fixes following splat by adding the NULL check. Unable to handle kernel NULL pointer dereference at virtual address 000000000000000d pc : rmnet_rx_handler+0x124/0x284 lr : rmnet_rx_handler+0x124/0x284 rmnet_rx_handler+0x124/0x284 __netif_receive_skb_core+0x758/0xd74 __netif_receive_skb+0x50/0x17c process_backlog+0x15c/0x1b8 napi_poll+0x88/0x284 net_rx_action+0xbc/0x23c __do_softirq+0x20c/0x48c Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Link: https://lore.kernel.org/r/1605298325-3705-1-git-send-email-subashab@codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16net: mvneta: fix possible memory leak in mvneta_swbm_add_rx_fragmentLorenzo Bianconi1-2/+3
Recycle the page running page_pool_put_full_page() in mvneta_swbm_add_rx_fragment routine when the last descriptor contains just the FCS or if the received packet contains more than MAX_SKB_FRAGS fragments Fixes: ca0e014609f0 ("net: mvneta: move skb build after descriptors processing") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/df6a2bad70323ee58d3901491ada31c1ca2a40b9.1605291228.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16net: stmmac: Use rtnl_lock/unlock on netif_set_real_num_rx_queues() callWong Vee Khee1-0/+2
Fix an issue where dump stack is printed on suspend resume flow due to netif_set_real_num_rx_queues() is not called with rtnl_lock held(). Fixes: 686cff3d7022 ("net: stmmac: Fix incorrect location to set real_num_rx|tx_queues") Reported-by: Christophe ROULLIER <christophe.roullier@st.com> Tested-by: Christophe ROULLIER <christophe.roullier@st.com> Cc: Alexandre TORGUE <alexandre.torgue@st.com> Reviewed-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Wong Vee Khee <vee.khee.wong@intel.com> Link: https://lore.kernel.org/r/20201115074210.23605-1-vee.khee.wong@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16net: ethernet: ti: cpsw: fix error return code in cpsw_probe()Zhang Changzhong1-0/+1
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 83a8471ba255 ("net: ethernet: ti: cpsw: refactor probe to group common hw initialization") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1605250173-18438-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16net: stmmac: dwmac-intel-plat: fix error return code in intel_eth_plat_probe()Zhang Changzhong1-1/+3
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 9efc9b2b04c7 ("net: stmmac: Add dwmac-intel-plat for GBE driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1605249243-17262-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16qlcnic: fix error return code in qlcnic_83xx_restart_hw()Zhang Changzhong1-1/+2
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 3ced0a88cd4c ("qlcnic: Add support to run firmware POST") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1605248186-16013-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16net: fec: Fix reference count leak in fec series opsZhang Qilong1-7/+5
pm_runtime_get_sync() will increment pm usage at first and it will resume the device later. If runtime of the device has error or device is in inaccessible state(or other error state), resume operation will fail. If we do not call put operation to decrease the reference, it will result in reference count leak. Moreover, this device cannot enter the idle state and always stay busy or other non-idle state later. So we fixed it by replacing it with pm_runtime_resume_and_get. Fixes: 8fff755e9f8d0 ("net: fec: Ensure clocks are enabled while using mdio bus") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16r8169: improve rtl8169_start_xmitHeiner Kallweit1-9/+6
Improve the following in rtl8169_start_xmit: - tp->cur_tx can be accessed in parallel by rtl_tx(), therefore annotate the race by using WRITE_ONCE - avoid checking stop_queue a second time by moving the doorbell check - netif_stop_queue() uses atomic operation set_bit() that includes a full memory barrier on some platforms, therefore use smp_mb__after_atomic to avoid overhead Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/80085451-3eaf-507a-c7c0-08d607c46fbc@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14mlxsw: spectrum_router: Remove outdated commentIdo Schimmel1-6/+0
Since commit 21151f64a458 ("mlxsw: Add new FIB entry type for reject routes") this comment is no longer correct. Remove it. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14mlxsw: spectrum_router: Consolidate mlxsw_sp_nexthop{4, 6}_type_fini()Ido Schimmel1-15/+3
The two functions are identical, so consolidate them to mlxsw_sp_nexthop_type_fini(). Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14mlxsw: spectrum_router: Consolidate mlxsw_sp_nexthop{4, 6}_type_init()Ido Schimmel1-57/+21
The two functions are now identical, so consolidate them to mlxsw_sp_nexthop_type_init(). Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14mlxsw: spectrum_router: Remove unused argument from mlxsw_sp_nexthop6_type_init()Ido Schimmel1-2/+1
Remove it as it is unused. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14mlxsw: spectrum_router: Pass nexthop netdev to mlxsw_sp_nexthop4_type_init()Ido Schimmel1-4/+3
Instead of passing the nexthop and resolving the nexthop netdev from it, pass the nexthop netdev directly. This will later allow us to consolidate code paths between IPv4 and IPv6 code. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14mlxsw: spectrum_router: Pass nexthop netdev to mlxsw_sp_nexthop6_type_init()Ido Schimmel1-3/+2
Instead of passing the route and resolving the nexthop netdev from it, pass the nexthop netdev directly. This will later allow us to consolidate code paths between IPv4 and IPv6 code. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14mlxsw: spectrum_ipip: Remove overlay protocol from can_offload() callbackIdo Schimmel3-13/+5
The overlay protocol (i.e., IPv4/IPv6) that is being encapsulated has no impact on whether a certain IP tunnel can be offloaded or not. Only the underlay protocol matters. Therefore, remove the unused overlay protocol parameter from the callback. This will later allow us to consolidate code paths between IPv4 and IPv6 code. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14mlxsw: spectrum_router: Split nexthop group configuration to a different structIdo Schimmel1-149/+228
Currently, the individual nexthops member in the group and attributes of the group (e.g., its type) are stored in the same struct (i.e., 'struct mlxsw_sp_nexthop_group'). This is fine since the individual nexthops cannot change during the lifetime of the group. With nexthop objects this is no longer the case. An existing nexthop group can be replaced to use a new set of nexthops. Creating a new struct whenever a group is replaced entails replacing the group pointer of all the routes (i.e., 'struct mlxsw_sp_fib_entry') using the group. Avoid this inefficient step by splitting the nexthop group configuration to a different struct (i.e., 'struct mlxsw_sp_nexthop_group_info'). When a nexthop group is replaced a new group info struct is created and the individual rotues do not need to be touched. Illustration after the change: mlxsw_sp_fib_entry mlxsw_sp_nexthop_group mlxsw_sp_nexthop_group_info +-------------------+ +----------------------+ +---------------------------+ | nh_group; +--> nhgi; +--> | | | | | | | +-------------------+ +----------------------+ +---------------------------+ No functional changes intended. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14mlxsw: spectrum_router: Move IPv4 FIB info into a union in nexthop group structIdo Schimmel1-11/+9
Instead of storing the FIB info as 'priv' when the nexthop group represents an IPv4 nexthop group, simply store it as a FIB info with a proper comment. When nexthop objects are supported, this field will become a union with the nexthop object's identifier. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14mlxsw: spectrum_router: Remove unused field 'prio' from IPv4 FIB entry structIdo Schimmel1-2/+0
Not used anywhere. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14mlxsw: spectrum_router: Store FIB info in routeIdo Schimmel1-6/+7
When needed, IPv4 routes fetch the FIB info (i.e., 'struct fib_info') from their associated nexthop group. This will not work when the nexthop group represents a nexthop object (i.e., 'struct nexthop'), as it will only have access to the nexthop's identifier. Instead, store the FIB info in the route itself. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14mlxsw: spectrum_router: Associate neighbour table with nexthop instead of groupIdo Schimmel1-11/+9
As explained in the previous patch, nexthop objects can have both IPv4 and IPv6 nexthops in the same group. Therefore, move the neighbour table to be a property of the nexthop instead of the nexthop group. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14mlxsw: spectrum_router: Use nexthop group type in hash table keyIdo Schimmel1-13/+12
Both IPv4 and IPv6 nexthop groups are hashed in the same table. The protocol field is used to indicate how the hash should be computed for each group. When nexthop group objects are supported, the hash will be computed for them based on the nexthop identifier. To differentiate between all the nexthop group types, encode the type of the group in the key instead of the protocol. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14mlxsw: spectrum_router: Add nexthop group type fieldIdo Schimmel1-16/+18
Currently, the type (i.e., IPv4/IPv6) of the nexthop group is derived from the neighbour table associated with the group. This is problematic when nexthop objects are taken into account, as a nexthop group object can contain both IPv4 and IPv6 nexthops. Instead, add a new field that indicates the type of the group and initialize it during the group's creation. Currently, the types are IPv4 ('struct fib_info') and IPv6 ('struct fib6_info'). In the future another type will be added for nexthop objects ('struct nexthop'). Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.