aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2020-10-14ibmveth: Identify ingress large send packets.David Wilder1-1/+12
Ingress large send packets are identified by either: The IBMVETH_RXQ_LRG_PKT flag in the receive buffer or with a -1 placed in the ip header checksum. The method used depends on firmware version. Frame geometry and sufficient header validation is performed by the hypervisor eliminating the need for further header checks here. Fixes: 7b5967389f5a ("ibmveth: set correct gso_size and gso_type") Signed-off-by: David Wilder <dwilder@us.ibm.com> Reviewed-by: Thomas Falcon <tlfalcon@linux.ibm.com> Reviewed-by: Cristobal Forno <cris.forno@ibm.com> Reviewed-by: Pradeep Satyanarayana <pradeeps@linux.vnet.ibm.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-14ibmveth: Switch order of ibmveth_helper calls.David Wilder1-5/+5
ibmveth_rx_csum_helper() must be called after ibmveth_rx_mss_helper() as ibmveth_rx_csum_helper() may alter ip and tcp checksum values. Fixes: 66aa0678efc2 ("ibmveth: Support to enable LSO/CSO for Trunk VEA.") Signed-off-by: David Wilder <dwilder@us.ibm.com> Reviewed-by: Thomas Falcon <tlfalcon@linux.ibm.com> Reviewed-by: Cristobal Forno <cris.forno@ibm.com> Reviewed-by: Pradeep Satyanarayana <pradeeps@linux.vnet.ibm.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-14cxgb4: handle 4-tuple PEDIT to NAT mode translationHerat Ramani2-13/+177
The 4-tuple NAT offload via PEDIT always overwrites all the 4-tuple fields even if they had not been explicitly enabled. If any fields in the 4-tuple are not enabled, then the hardware overwrites the disabled fields with zeros, instead of ignoring them. So, add a parser that can translate the enabled 4-tuple PEDIT fields to one of the NAT mode combinations supported by the hardware and hence avoid overwriting disabled fields to 0. Any rule with unsupported NAT mode combination is rejected. Signed-off-by: Herat Ramani <herat@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-14Merge tag 'spdx-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdxLinus Torvalds23-45/+23
Pull SPDX updates from Greg KH: "Here are some SPDX-specific changes for 5.10-rc1. They include: - driver fixes to make spdxcheck.pl work properly - add GFDL licenses as "deprecated" but required due to some of our documentation using them - add Zlib license as "deprecated" but required because we have code with this license in the tree. - convert some drivers to have SPDX identifiers that previously didn't have them. All have been in linux-next for a very long time with no reported issues" * tag 'spdx-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: scripts/spdxcheck.py: handle license identifiers in XML comments net/mlx5: IPsec: make spdxcheck.py happy LICENSES/deprecated: add Zlib license text LICENSE: add GFDL deprecated licenses net/qla3xxx: Convert to SPDX license identifiers net/qlge: Convert to SPDX license identifiers net/qlcnic: Convert to SPDX license identifiers scsi/qla2xxx: Convert to SPDX license identifiers scsi/qla4xxx: Convert to SPDX license identifiers
2020-10-13Merge tag 'mlx5-updates-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski11-35/+400
Saeed Mahameed says: ==================== mlx5-updates-2020-10-12 Updates to mlx5 driver: - Cleanup fix of uininitialized pointer read - xfrm IPSec TX offload ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13e1000: remove unused and incorrect codeJesse Brandeburg1-9/+1
The e1000_clear_vfta function was triggering a warning in kbuild-bot testing. It's actually a bug but has no functional impact. drivers/net/ethernet/intel/e1000/e1000_hw.c:4415:58: warning: Same expression in both branches of ternary operator. [duplicateExpressionTernary] Fix this warning by removing the offending code and simplifying the routine to do exactly what it did before, no functional change. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13i40e: Allow changing FEC settings on X722 if supported by FWJaroslaw Gawin5-12/+49
Starting with API version 1.10 firmware for X722 devices has ability to change FEC settings in PHY. Code added in this patch allows changing FEC settings if the capability flag indicates the device supports this feature. Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13net: mscc: ocelot: remove duplicate ocelot_port_dev_checkVladimir Oltean1-8/+3
A helper for checking whether a net_device belongs to mscc_ocelot already existed and did not need to be rewritten. Use it. Fixes: 319e4dd11a20 ("net: mscc: ocelot: introduce conversion helpers between port and netdev") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20201011092041.3535101-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13macb: support the two tx descriptors on at91rm9200Willy Tarreau2-8/+40
The at91rm9200 variant used by a few chips including the MSC313 supports two Tx descriptors (one frame being serialized and another one queued). However the driver only implemented a single one, which adds a dead time after each transfer to receive and process the interrupt and wake the queue up, preventing from reaching line rate. This patch implements a very basic 2-deep queue to address this limitation. The tests run on a Breadbee board equipped with an MSC313E show that at 1 GHz, HTTP traffic on medium-sized objects (45kB) was limited to exactly 50 Mbps before this patch, and jumped to 76 Mbps with this patch. And tests on a single TCP stream with an MTU of 576 jump from 10kpps to 15kpps. With 1500 byte packets it's now possible to reach line rate versus 75 Mbps before. Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/r/20201011090944.10607-4-w@1wt.eu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13macb: prepare at91 to use a 2-frame TX queueWilly Tarreau2-16/+18
The RM9200 supports one frame being sent while another one is waiting in queue. This avoids the dead time that follows the emission of a frame and which prevents one from reaching line speed. Right now the driver supports only a single skb, so we'll first replace the rm9200-specific skb info with an array of two macb_tx_skb (already used by other drivers). This patch only moves the skb_length to txq[0].size and skb_physaddr to skb[0].mapping but doesn't perform any other change. It already uses [desc] in order to minimize future changes. Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/r/20201011090944.10607-3-w@1wt.eu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13macb: add RM9200's interrupt flag TBREWilly Tarreau1-0/+2
Transmit Buffer Register Empty replaces TXERR on RM9200 and signals the sender may try to send again becase the last queued frame is no longer in queue (being transmitted or already transmitted). Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/r/20201011090944.10607-2-w@1wt.eu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-12Merge branch 'work.csum_and_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds2-3/+2
Pull copy_and_csum cleanups from Al Viro: "Saner calling conventions for csum_and_copy_..._user() and friends" [ Removing 800+ lines of code and cleaning stuff up is good - Linus ] * 'work.csum_and_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ppc: propagate the calling conventions change down to csum_partial_copy_generic() amd64: switch csum_partial_copy_generic() to new calling conventions sparc64: propagate the calling convention changes down to __csum_partial_copy_...() xtensa: propagate the calling conventions change down into csum_partial_copy_generic() mips: propagate the calling convention change down into __csum_partial_copy_..._user() mips: __csum_partial_copy_kernel() has no users left mips: csum_and_copy_{to,from}_user() are never called under KERNEL_DS sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic() i386: propagate the calling conventions change down to csum_partial_copy_generic() sh: propage the calling conventions change down to csum_partial_copy_generic() m68k: get rid of zeroing destination on error in csum_and_copy_from_user() arm: propagate the calling convention changes down to csum_partial_copy_from_user() alpha: propagate the calling convention changes down to csum_partial_copy.c helpers saner calling conventions for csum_and_copy_..._user() csum_and_copy_..._user(): pass 0xffffffff instead of 0 as initial sum csum_partial_copy_nocheck(): drop the last argument unify generic instances of csum_partial_copy_nocheck() icmp_push_reply(): reorder adding the checksum up skb_copy_and_csum_bits(): don't bother with the last argument
2020-10-12net/mlx5e: IPsec: Add Connect-X IPsec Tx data path offloadRaed Salem5-29/+202
In the TX data path, spot packets with xfrm stack IPsec offload indication. Fill Software-Parser segment in TX descriptor so that the hardware may parse the ESP protocol, and perform TX checksum offload on the inner payload. Support GSO, by providing the trailer data and ICV placeholder so HW can fill it post encryption operation. Padding alignment cannot be performed in HW (ConnectX-6Dx) due to a bug. Software can overcome this limitation by adding NETIF_F_HW_ESP to the gso_partial_features field in netdev so the packets being aligned by the stack. l4_inner_checksum cannot be offloaded by HW for IPsec tunnel type packet. Note that for GSO SKBs, the stack does not include an ESP trailer, unlike the non-GSO case. Below is the iperf3 performance report on two server of 24 cores Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz with ConnectX6-DX. All the bandwidth test uses iperf3 TCP traffic with packet size 128KB. Each tunnel uses one iperf3 stream with one thread (option -P1). TX crypto offload shows improvements on both bandwidth and CPU utilization. ---------------------------------------------------------------------- Mode | Num tunnel | BW | Send CPU util | Recv CPU util | | (Gbps) | (Average %) | (Average %) ---------------------------------------------------------------------- Cryto offload | | | | (RX only) | 1 | 4.7 | 4.2 | 3.5 ---------------------------------------------------------------------- Cryto offload | | | | (RX only) | 24 | 15.6 | 20 | 10 ---------------------------------------------------------------------- Non-offload | 1 | 4.6 | 4 | 5 ---------------------------------------------------------------------- Non-offload | 24 | 11.9 | 16 | 12 ---------------------------------------------------------------------- Cryto offload | | | | (TX & RX) | 1 | 11.9 | 2.1 | 5.9 ---------------------------------------------------------------------- Cryto offload | | | | (TX & RX) | 24 | 38 | 9.5 | 27.5 ---------------------------------------------------------------------- Cryto offload | | | | (TX only) | 1 | 4.7 | 0.7 | 5 ---------------------------------------------------------------------- Cryto offload | | | | (TX only) | 24 | 14.5 | 6 | 20 Regression tests show no degradation on non-ipsec and non-offload-ipsec traffics. The packet rate test uses pktgen UDP to transmit on single CPU, the instructions and cycles are measured on the transmit CPU. before: ---------------------------------------------------------------------- Non-offload | 1 | 4.7 | 4.2 | 5.1 ---------------------------------------------------------------------- Non-offload | 24 | 11.2 | 14 | 15 ---------------------------------------------------------------------- Non-ipsec | 1 | 28 | 4 | 5.7 ---------------------------------------------------------------------- Non-ipsec | 24 | 68.3 | 17.8 | 39.7 ---------------------------------------------------------------------- Non-ipsec packet rate(BURST=1000 BC=5 NCPUS=1 SIZE=60) 13.56Mpps, 456 instructions/pkt, 191 cycles/pkt after: ---------------------------------------------------------------------- Non-offload | 1 | 4.69 | 4.2 | 5 ---------------------------------------------------------------------- Non-offload | 24 | 11.9 | 13.5 | 15.1 ---------------------------------------------------------------------- Non-ipsec | 1 | 29 | 3.2 | 5.5 ---------------------------------------------------------------------- Non-ipsec | 24 | 68.2 | 18.5 | 39.8 ---------------------------------------------------------------------- Non-ipsec packet rate: 13.56Mpps, 472 instructions/pkt, 191 cycles/pkt Signed-off-by: Raed Salem <raeds@mellanox.com> Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-10-12net/mlx5e: IPsec: Add TX steering rule per IPsec stateHuy Nguyen2-4/+176
Add new FTE in TX IPsec FT per IPsec state. It has the same matching criteria as the RX steering rule. The IPsec FT is created/destroyed when the first/last rule is added/deleted respectively. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Boris Pismenny <borisp@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-10-12net/mlx5: Add NIC TX domain namespaceHuy Nguyen3-1/+22
Add new namespace that represents the NIC TX domain. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Raed Salem <raeds@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-10-12net/mlx5: Fix uininitialized pointer read on pointer attrColin Ian King1-1/+0
Currently the error exit path err_free kfree's attr. In the case where flow and parse_attr failed to be allocated this return path will free the uninitialized pointer attr, which is not correct. In the other case where attr fails to allocate attr does not need to be freed. So in both error exits via err_free attr should not be freed, so remove it. Addresses-Coverity: ("Uninitialized pointer read") Fixes: ff7ea04ad579 ("net/mlx5e: Fix potential null pointer dereference") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-10-12bnxt_en: Add stored FW version info to devlink info_get cb.Vasundhara Volam1-2/+45
This patch adds FW versions stored in the flash to devlink info_get callback. Return the correct fw.psid running version using the newly added bp->nvm_cfg_ver. v2: Ensure stored pkg_name string is NULL terminated when copied to devlink. Return directly from the last call to bnxt_dl_info_put(). If the FW call to get stored version fails for any reason, return success immediately to devlink without the stored versions. Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/1602493854-29283-10-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-12bnxt_en: Refactor bnxt_dl_info_get().Vasundhara Volam2-48/+71
Add a new function bnxt_dl_info_put() to simplify the code, as there are more stored firmware version fields to be added in the next patch. Also, rename fw_ver variable name to ncsi_ver for better naming while copying to devlink info_get cb. v2: Ensure active_pkg_name string is NULL terminated when copied to devlink. Return directly from the last call to bnxt_dl_info_put(). Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/1602493854-29283-9-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-12bnxt_en: Add bnxt_hwrm_nvm_get_dev_info() to query NVM info.Vasundhara Volam4-0/+31
Add a new bnxt_hwrm_nvm_get_dev_info() to query firmware version information via NVM_GET_DEV_INFO firmware command. Use it to get the running version of the NVM configuration information. This new function will also be used in subsequent patches to get the stored firmware versions. Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/1602493854-29283-8-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-12bnxt_en: Log unknown link speed appropriately.Michael Chan1-1/+5
If the VF virtual link is set to always enabled, the speed may be unknown when the physical link is down. The driver currently logs the link speed as 4294967295 Mbps which is SPEED_UNKNOWN. Modify the link up log message as "speed unknown" which makes more sense. Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/1602493854-29283-7-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-12bnxt_en: Log event_data1 and event_data2 when handling RESET_NOTIFY event.Michael Chan1-0/+3
Log these values that contain useful firmware state information. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/1602493854-29283-6-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-12bnxt_en: Simplify bnxt_async_event_process().Michael Chan1-9/+3
event_data1 and event_data2 are used when processing most events. Store these in local variables at the beginning of the function to simplify many of the case statements. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/1602493854-29283-5-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-12bnxt_en: Set driver default message level.Michael Chan1-1/+3
Currently, bp->msg_enable has default value of 0. It is more useful to have the commonly used NETIF_MSG_DRV and NETIF_MSG_HW enabled by default. v2: Change the fall back bnxt_reset_task() inside bnxt_rx_ring_reset() to silent mode. With older fw, we would take the fall back path and it would be very noisy. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/1602493854-29283-4-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-12bnxt_en: Enable online self tests for multi-host/NPAR mode.Vasundhara Volam1-4/+4
Online self tests are not disruptive and can be run in NPAR mode and in multi-host NIC as well. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/1602493854-29283-3-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-12bnxt_en: Return -EROFS to user space, if NVM writes are not permitted.Vasundhara Volam1-0/+2
If NVRAM resources are locked, NVM writes are not permitted. In such scenarios, firmware returns HWRM_ERR_CODE_RESOURCE_LOCKED error to firmware commands. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/1602493854-29283-2-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-12net: fec: Fix phy_device lookup for phy_reset_after_clk_enable()Marek Vasut1-2/+23
The phy_reset_after_clk_enable() is always called with ndev->phydev, however that pointer may be NULL even though the PHY device instance already exists and is sufficient to perform the PHY reset. This condition happens in fec_open(), where the clock must be enabled first, then the PHY must be reset, and then the PHY IDs can be read out of the PHY. If the PHY still is not bound to the MAC, but there is OF PHY node and a matching PHY device instance already, use the OF PHY node to obtain the PHY device instance, and then use that PHY device instance when triggering the PHY reset. Fixes: 1b0a83ac04e3 ("net: fec: add phy_reset_after_clk_enable() support") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: David S. Miller <davem@davemloft.net> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Richard Leitner <richard.leitner@skidata.com> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-12mlx4: handle non-napi callers to napi_pollJonathan Lemon2-1/+4
netcons calls napi_poll with a budget of 0 to transmit packets. Handle this by: - skipping RX processing - do not try to recycle TX packets to the RX cache Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-12net: korina: fix kfree of rx/tx descriptor arrayValentin Vidic1-1/+2
kmalloc returns KSEG0 addresses so convert back from KSEG1 in kfree. Also make sure array is freed when the driver is unloaded from the kernel. Fixes: ef11291bcd5f ("Add support the Korina (IDT RC32434) Ethernet MAC") Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-11net: mscc: ocelot: offload VLAN mangle action to VCAP IS1Vladimir Oltean2-4/+40
The VCAP_IS1_ACT_VID_REPLACE_ENA action, from the VCAP IS1 ingress TCAM, changes the classified VLAN. We are only exposing this ability for switch ports that are under VLAN aware bridges. This is because in standalone ports mode and under a bridge with vlan_filtering=0, the ocelot driver configures the switch to operate as VLAN-unaware, so the classified VLAN is not derived from the 802.1Q header from the packet, but instead is always equal to the port-based VLAN ID of the ingress port. We _can_ still change the classified VLAN for packets when operating in this mode, but the end result will most likely be a drop, since both the ingress and the egress port need to be members of the modified VLAN. And even if we install the new classified VLAN into the VLAN table of the switch, the result would still not be as expected: we wouldn't see, on the output port, the modified VLAN tag, but the original one, even though the classified VLAN was indeed modified. This is because of how the hardware works: on egress, what is pushed to the frame is a "port tag", which gives us the following options: - Tag all frames with port tag (derived from the classified VLAN) - Tag all frames with port tag, except if the classified VLAN is 0 or equal to the native VLAN of the egress port - No port tag Needless to say, in VLAN-unaware mode we are disabling the port tag. Otherwise, the existing VLAN tag would be ignored, and a second VLAN tag (the port tag), holding the classified VLAN, would be pushed (instead of replacing the existing 802.1Q tag). This is definitely not what the user wanted when installing a "vlan modify" action. So it is simply not worth bothering with VLAN modify rules under other configurations except when the ports are fully VLAN-aware. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-11enetc: Migrate to PHYLINK and PCS_LYNXClaudiu Manoil7-165/+190
This is a methodical transition of the driver from phylib to phylink, following the guidelines from sfp-phylink.rst. The MAC register configurations based on interface mode were moved from the probing path to the mac_config() hook. MAC enable and disable commands (enabling Rx and Tx paths at MAC level) were also extracted and assigned to their corresponding phylink hooks. As part of the migration to phylink, the serdes configuration from the driver was offloaded to the PCS_LYNX module, introduced in commit 0da4c3d393e4 ("net: phy: add Lynx PCS module"), the PCS_LYNX module being a mandatory component required to make the enetc driver work with phylink. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Ioana Ciornei <ioana.cionei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-11enetc: Clean up serdes configurationClaudiu Manoil1-53/+48
Decouple internal mdio bus creation from serdes configuration, as a prerequisite to offloading serdes configuration to a different module. Group together mdio bus creation routines, cleanup. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-11enetc: Clean up MAC and link configurationClaudiu Manoil1-48/+67
Decouple level MAC configuration based on phy interface type from general port configuration. Group together MAC and link configuration code. Decouple external mdio bus creation from interface type parsing. No longer return an (unhandled) error code when phy_node not found, use phy_node to indicate whether the port has a phy or not. No longer fall-through when serdes configuration fails for the link modes that require internal link configuration. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-10dpaa_eth: enable NETIF_MSG_HW by defaultMaxim Kochetkov1-1/+1
When packets are received on the error queue, this function under net_ratelimit(): netif_err(priv, hw, net_dev, "Err FD status = 0x%08x\n"); does not get printed. Instead we only see: [ 3658.845592] net_ratelimit: 244 callbacks suppressed [ 3663.969535] net_ratelimit: 230 callbacks suppressed [ 3669.085478] net_ratelimit: 228 callbacks suppressed Enabling NETIF_MSG_HW fixes this issue, and we can see some information about the frame descriptors of packets. Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-10r8169: factor out handling rtl8169_statsHeiner Kallweit1-21/+25
Factor out handling the private packet/byte counters to new functions rtl_get_priv_stats() and rtl_inc_priv_stats(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-10net: thunderx: Use struct_size() helper in kmalloc()Gustavo A. R. Silva1-2/+2
Make use of the new struct_size() helper instead of the offsetof() idiom. Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09net: tlan: Fix typo abitraryNaoki Hayama1-1/+1
Fix comment typo. s/abitrary/arbitrary/ Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09ice: fix adding IP4 IP6 Flow Director rulesDan Nowlin1-1/+61
A subsequent addition of an IP4 or IP6 rule after other rules would overwrite any existing TCAM entries of related L4 protocols(ex: tcp4 or udp6). This was due to the mask including too many TCAM entries. Add new packet type masks with bits properly excluded so rules are not overwritten. Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Tested-by: Brijesh Behera <brijeshx.behera@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09ice: Fix pointer cast warningsBixuan Cui1-2/+2
pointers should be casted to unsigned long to avoid -Wpointer-to-int-cast warnings: drivers/net/ethernet/intel/ice/ice_flow.h:197:33: warning: cast from pointer to integer of different size drivers/net/ethernet/intel/ice/ice_flow.h:198:32: warning: cast to pointer from integer of different size Signed-off-by: Bixuan Cui <cuibixuan@huawei.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09ice: add additional debug logging for firmware updateJacob Keller3-6/+33
While debugging a recent failure to update the flash of an ice device, I found it helpful to add additional logging which helped determine the root cause of the problem being a timeout issue. Add some extra dev_dbg() logging messages which can be enabled using the dynamic debug facility, including one for ice_aq_wait_for_event that will use jiffies to capture a rough estimate of how long we waited for the completion of a firmware command. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Brijesh Behera <brijeshx.behera@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09ice: refactor devlink_port to be per-VSIJacob Keller5-33/+45
Currently, the devlink_port structure is stored within the ice_pf. This made sense because we create a single devlink_port for each PF. This setup does not mesh with the abstractions in the driver very well, and led to a flow where we accidentally call devlink_port_unregister twice during error cleanup. In particular, if devlink_port_register or devlink_port_unregister are called twice, this leads to a kernel panic. This appears to occur during some possible flows while cleaning up from a failure during driver probe. If register_netdev fails, then we will call devlink_port_unregister in ice_cfg_netdev as it cleans up. Later, we again call devlink_port_unregister since we assume that we must cleanup the port that is associated with the PF structure. This occurs because we cleanup the devlink_port for the main PF even though it was not allocated. We allocated the port within a per-VSI function for managing the main netdev, but did not release the port when cleaning up that VSI, the allocation and destruction are not aligned. Instead of attempting to manage the devlink_port as part of the PF structure, manage it as part of the PF VSI. Doing this has advantages, as we can match the de-allocation of the devlink_port with the unregister_netdev associated with the main PF VSI. Moving the port to the VSI is preferable as it paves the way for handling devlink ports allocated for other purposes such as SR-IOV VFs. Since we're changing up how we allocate the devlink_port, also change the indexing. Originally, we indexed the port using the PF id number. This came from an old goal of sharing a devlink for each physical function. Managing devlink instances across multiple function drivers is not workable. Instead, lets set the port number to the logical port number returned by firmware and set the index using the VSI index (sometimes referred to as VSI handle). Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09ice: add the DDP Track ID to devlink infoJacob Keller1-0/+8
Add "fw.app.bundle_id" to display the DDP Track ID of the active DDP package. This id is similar to "fw.bundle_id" and is a unique identifier for the DDP package that is loaded in the device. Each new DDP has a unique Track ID generated for it, and the ID can be used to identify and track the DDP package. Add documentation for the new devlink info version. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09ice: Change ice_info_get_dsn to be voidAnirudh Venkataramanan1-8/+2
ice_info_get_dsn always returns 0, so just make it void. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09ice: remove repeated wordsBruce Allan4-5/+5
A new test in checkpatch detects repeated words; cleanup all pre-existing occurrences of those now. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Co-developed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09ice: devlink: use %*phD to print small bufferAndy Shevchenko1-3/+1
Use %*phD format to print small buffer as hex string. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09net/mlx5: Add support for devlink reload limit no resetMoshe Shemesh1-0/+25
Add support for devlink reload action fw_activate with reload limit no_reset which does firmware live patching, updating the firmware image without reset, no downtime and no configuration lose. The driver checks if the firmware is capable of handling the pending firmware changes as a live patch. If it is then it triggers firmware live patching flow. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09net/mlx5: Add support for fw live patch eventMoshe Shemesh3-0/+77
Firmware live patch event notifies the driver that the firmware was just updated using live patch. In such case the driver should not reload or re-initiate entities, part to updating the firmware version and re-initiate the firmware tracer which can be updated by live patch with new strings database to help debugging an issue. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09net/mlx5: Add devlink param enable_remote_dev_reset supportMoshe Shemesh3-0/+52
The enable_remote_dev_reset devlink param flags that the host admin allows resets by other hosts. In case it is cleared mlx5 host PF driver will send NACK on pci sync for firmware update reset request and the command will fail. By default enable_remote_dev_reset parameter is true, so pci sync for firmware update reset is enabled. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09net/mlx5: Add support for devlink reload action fw activateMoshe Shemesh3-11/+108
Add support for devlink reload action fw_activate. To activate firmware image the mlx5 driver resets the firmware and reloads it from flash. If a new image was stored on flash it will be loaded. Once this reload command is executed the driver initiates fw sync reset flow, where the firmware synchronizes all PFs on coming reset and driver reload. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09net/mlx5: Handle sync reset abort eventMoshe Shemesh1-0/+15
If firmware sends sync_reset_abort to driver the driver should clear the reset requested mode as reset is not expected any more. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09net/mlx5: Handle sync reset now eventMoshe Shemesh1-0/+119
On sync_reset_now event the driver does reload and PCI link toggle to activate firmware upgrade reset. When the firmware sends this event it syncs the event on all PFs, so all PFs will do PCI link toggle at once. To do PCI link toggle, the driver ensures that no other device ID under the same bridge by checking that all the PF functions under the same PCI bridge have same device ID. If no other device it uses PCI bridge link control to turn link down and up. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.