aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/hyperv (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-07-25hv_netvsc: Fix VF register on bonding devicesHaiyang Zhang1-2/+2
Added a condition to avoid bonding devices with same MAC registering as VF. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-08netvsc: Use the new in-place consumption APIs in the rx pathK. Y. Srinivasan1-29/+59
Use the new APIs for eliminating a copy on the receive path. These new APIs also help in minimizing the number of memory barriers we end up issuing (in the ringbuffer code) since we can better control when we want to expose the ring state to the host. The patch is being resent to address earlier email issues. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09netvsc: get rid of completion timeoutsVitaly Kuznetsov2-100/+31
I'm hitting 5 second timeout in rndis_filter_set_rss_param() while setting RSS parameters for the device. When this happens we end up returning -ETIMEDOUT from the function and rndis_filter_device_add() falls back to setting net_device->max_chn = 1; net_device->num_chn = 1; net_device->num_sc_offered = 0; but after a moment the rndis request succeeds and subchannels start to appear. netvsc_sc_open() does unconditional nvscdev->num_sc_offered-- and it becomes U32_MAX-1. Consequent rndis_filter_device_remove() will hang while waiting for all U32_MAX-1 subchannels to appear and this is not going to happen. The immediate issue could be solved by adding num_sc_offered > 0 check to netvsc_sc_open() but we're getting out of sync with the host and it's not easy to adjust things later, e.g. in this particular case we'll be creating queues without a user request for it and races are expected. Same applies to other parts of the driver which have the same completion timeout. Following the trend in drivers/hv/* code I suggest we remove all these timeouts completely. As a guest we can always trust the host we're running on and if the host screws things up there is no easy way to recover anyway. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-05hv_netvsc: pass struct net_device to rndis_filter_set_offload_params()Vitaly Kuznetsov1-3/+2
The only caller rndis_filter_device_add() has 'struct net_device' pointer already. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-05hv_netvsc: pass struct net_device to rndis_filter_set_device_mac()Vitaly Kuznetsov3-6/+3
We unpack 'struct net_device' in netvsc_set_mac_addr() to get to 'struct hv_device' pointer which we use in rndis_filter_set_device_mac() to get back to 'struct net_device'. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-05hv_netvsc: pass struct netvsc_device to rndis_filter_{open, close}()Vitaly Kuznetsov3-19/+13
Both rndis_filter_open()/rndis_filter_close() use struct hv_device to reach to struct netvsc_device only and all callers have it already. While on it, rename net_device to nvdev in rndis_filter_open() as net_device is misleading. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-05hv_netvsc: introduce {net, hv}_device_to_netvsc_device() helpersVitaly Kuznetsov3-25/+22
Make it easier to get 'struct netvsc_device' from 'struct net_device' and 'struct hv_device' by introducing inline helpers. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-05hv_netvsc: remove redundant assignment in netvsc_recv_callback()Vitaly Kuznetsov1-1/+0
net_device_ctx is assigned in the very beginning of the function and 'net' pointer doesn't change. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-03hv_netvsc: Fix VF register on vlan devicesHaiyang Zhang1-0/+4
Added a condition to avoid vlan devices with same MAC registering as VF. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16hv_netvsc: set nvdev link after populating chn_tableVitaly Kuznetsov1-11/+18
Crash in netvsc_send() is observed when netvsc device is re-created on mtu change/set channels. The crash is caused by dereferencing of NULL channel pointer which comes from chn_table. The root cause is a mixture of two facts: - we set nvdev pointer in net_device_context in alloc_net_device() before we populate chn_table. - we populate chn_table[0] only. The issue could be papered over by checking channel != NULL in netvsc_send() but populating the whole chn_table and writing the nvdev pointer afterwards seems more appropriate. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16hv_netvsc: synchronize netvsc_change_mtu()/netvsc_set_channels() with netvsc_remove()Vitaly Kuznetsov1-2/+7
When netvsc device is removed during mtu change or channels setup we get into troubles as both paths are trying to remove the device. Synchronize them with start_remove flag and rtnl lock. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16hv_netvsc: get rid of struct net_device pointer in struct netvsc_deviceVitaly Kuznetsov4-64/+72
Simplify netvsvc pointer graph by getting rid of the redundant ndev pointer. We can always get a pointer to struct net_device from somewhere else. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16hv_netvsc: untangle the pointer messVitaly Kuznetsov4-122/+99
We have the following structures keeping netvsc adapter state: - struct net_device - struct net_device_context - struct netvsc_device - struct rndis_device - struct hv_device and there are pointers/dependencies between them: - struct net_device_context is contained in struct net_device - struct hv_device has driver_data pointer which points to 'struct net_device' OR 'struct netvsc_device' depending on driver's state (!). - struct net_device_context has a pointer to 'struct hv_device'. - struct netvsc_device has pointers to 'struct hv_device' and 'struct net_device_context'. - struct rndis_device has a pointer to 'struct netvsc_device'. Different functions get different structures as parameters and use these pointers for traveling. The problem is (in addition to keeping in mind this complex graph) that some of these structures (struct netvsc_device and struct rndis_device) are being removed and re-created on mtu change (as we implement it as re-creation of hyper-v device) so our travel using these pointers is dangerous. Simplify this to a the following: - add struct netvsc_device pointer to struct net_device_context (which is a part of struct net_device and thus never disappears) - remove struct hv_device and struct net_device_context pointers from struct netvsc_device - replace pointer to 'struct netvsc_device' with pointer to 'struct net_device'. - always keep 'struct net_device' in hv_device driver_data. We'll end up with the following 'circular' structure: net_device: [net_device_context] -> netvsc_device -> rndis_device -> net_device -> hv_device -> net_device On MTU change we'll be removing the 'netvsc_device -> rndis_device' branch and re-creating it making the synchronization easier. There is one additional redundant pointer left, it is struct net_device link in struct netvsc_device, it is going to be removed in a separate commit. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16hv_netvsc: use start_remove flag to protect netvsc_link_change()Vitaly Kuznetsov1-4/+17
netvsc_link_change() can race with netvsc_change_mtu() or netvsc_set_channels() as these functions destroy struct netvsc_device and rndis filter. Use start_remove flag for syncronization. As netvsc_change_mtu()/netvsc_set_channels() are called with rtnl lock held we need to take it before checking start_remove value in netvsc_link_change(). Reported-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16hv_netvsc: move start_remove flag to net_device_contextVitaly Kuznetsov3-6/+13
struct netvsc_device is destroyed on mtu change so keeping the protection flag there is not a good idea. Move it to struct net_device_context which is preserved. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24hv_netvsc: Fix the list processing for network change eventHaiyang Zhang1-1/+1
RNDIS_STATUS_NETWORK_CHANGE event is handled as two "half events" -- media disconnect & connect. The second half should be added to the list head, not to the tail. So all events are processed in normal order. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-18hv_netvsc: Implement support for VF drivers on Hyper-VKY Srinivasan4-26/+335
Support VF drivers on Hyper-V. On Hyper-V, each VF instance presented to the guest has an associated synthetic interface that shares the MAC address with the VF instance. Typically these are bonded together to support live migration. By default, the host delivers all the incoming packets on the synthetic interface. Once the VF is up, we need to explicitly switch the data path on the host to divert traffic onto the VF interface. Even after switching the data path, broadcast and multicast packets are always delivered on the synthetic interface and these will have to be injected back onto the VF interface (if VF is up). This patch implements the necessary support in netvsc to support Linux VF drivers. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-23hv_netvsc: Fix the order of num_sc_offered decrementHaiyang Zhang1-6/+6
Reorder the code in netvsc_sc_open(), so num_sc_offered is only decremented after vmbus_open() is called. This avoid pontential race of removing device before all channels are setup. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-23hv_netvsc: Fix the array sizes to be max supported channelsHaiyang Zhang2-5/+6
The VRSS_CHANNEL_MAX is the max number of channels supported by Hyper-V hosts. We use it for the related array sizes instead of using NR_CPUS, which may be set to several thousands. This patch reduces possible memory allocation failures. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-23hv_netvsc: Fix accessing freed memory in netvsc_change_mtu()Haiyang Zhang1-1/+4
struct netvsc_device is freed in rndis_filter_device_remove(). So we save the nvdev->num_chn into a temp variable for later usage. (Please also include this patch into stable branch.) Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07hv_netvsc: Move subchannel waiting to rndis_filter_device_remove()Haiyang Zhang1-6/+13
During hot add, vmbus_device_register() is called from vmbus_onoffer(), on the same workqueue as the subchannel offer message work-queue, so subchannel offer won't be processed until the vmbus_device_register()/... /netvsc_probe() is done. Also, vmbus_device_register() is called with channel_mutex locked, which prevents subchannel processing too. So the "waiting for sub-channel processing" will not success in hot add case. But, in usual module loading, the netvsc_probe() is called from different code path, and doesn't fail. This patch resolves the deadlock during NIC hot-add, and speeds up NIC loading time. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-29hv_netvsc: add ethtool support for set and get of settingssixiao@microsoft.com2-0/+60
This patch allows the user to set and retrieve speed and duplex of the hv_netvsc device via ethtool. Example: $ ethtool eth0 Settings for eth0: ... Speed: Unknown! Duplex: Unknown! (255) ... $ ethtool -s eth0 speed 1000 duplex full $ ethtool eth0 Settings for eth0: ... Speed: 1000Mb/s Duplex: Full ... This is based on patches by Roopa Prabhu and Nikolay Aleksandrov. Signed-off-by: Simon Xiao <sixiao@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+3
Conflicts: drivers/net/phy/bcm7xxx.c drivers/net/phy/marvell.c drivers/net/vxlan.c All three conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-19hv_netvsc: add software transmit timestamp supportsixiao@microsoft.com1-0/+3
Enable skb_tx_timestamp in hyperv netvsc. Signed-off-by: Simon Xiao <sixiao@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-13hv_netvsc: Restore needed_headroom requestVitaly Kuznetsov1-0/+3
Commit c0eb454034aa ("hv_netvsc: Don't ask for additional head room in the skb") got rid of needed_headroom setting for the driver. With the change I hit the following issue trying to use ptkgen module: [ 57.522021] kernel BUG at net/core/skbuff.c:1128! [ 57.522021] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC ... [ 58.721068] Call Trace: [ 58.721068] [<ffffffffa0144e86>] netvsc_start_xmit+0x4c6/0x8e0 [hv_netvsc] ... [ 58.721068] [<ffffffffa02f87fc>] ? pktgen_finalize_skb+0x25c/0x2a0 [pktgen] [ 58.721068] [<ffffffff814f5760>] ? __netdev_alloc_skb+0xc0/0x100 [ 58.721068] [<ffffffffa02f9907>] pktgen_thread_worker+0x257/0x1920 [pktgen] Basically, we're calling skb_cow_head(skb, RNDIS_AND_PPI_SIZE) and crash on if (skb_shared(skb)) BUG(); We probably need to restore needed_headroom setting (but shrunk to RNDIS_AND_PPI_SIZE as we don't need more) to request the required headroom space. In theory, it should not give us performance penalty. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11hv_netvsc: cleanup netdev feature flags for netvscsixiao@microsoft.com1-4/+7
1. Adding NETIF_F_TSO6 feature flag; 2. Adding NETIF_F_HW_CSUM. NETIF_F_IPV6_CSUM and NETIF_F_IP_CSUM are being deprecated; 3. Cleanup the coding style of flag assignment by using macro. Signed-off-by: Simon Xiao <sixiao@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25hv_netvsc: Fix book keeping of skb during batching processHaiyang Zhang2-11/+23
Since eliminating send_completion_tid from struct hv_netvsc_packet, we haven't add proper book keeping for the skb of the batched packet. This patch fixes this issue and allows the previous skb is properly freed. Otherwise, a panic may happen. Thanks to Simon Xiao <sixiao@microsoft.com> for bisecting and analysis. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25hv_netvsc: use skb_get_hash() instead of a homegrown implementationVitaly Kuznetsov1-64/+3
Recent changes to 'struct flow_keys' (e.g commit d34af823ff40 ("net: Add VLAN ID to flow_keys")) introduced a performance regression in netvsc driver. Is problem is, however, not the above mentioned commit but the fact that netvsc_set_hash() function did some assumptions on the struct flow_keys data layout and this is wrong. Get rid of netvsc_set_hash() by switching to skb_get_hash(). This change will also imply switching to Jenkins hash from the currently used Toeplitz but it seems there is no good excuse for Toeplitz to stay. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14hv_netvsc: Fix race condition on Multi-Send Data fieldHaiyang Zhang1-0/+9
In commit 2a04ae8acb14 ("hv_netvsc: remove locking in netvsc_send()"), the locking for MSD (Multi-Send Data) field was removed. This could cause a race condition between RNDIS control messages and data packets processing, because these two types of traffic are not synchronized. This patch fixes this issue by sending control messages out directly without reading MSD field. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: Eliminate vlan_tci from struct hv_netvsc_packetKY Srinivasan3-13/+12
Eliminate vlan_tci from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: Eliminate status from struct hv_netvsc_packetKY Srinivasan4-22/+13
Eliminate status from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: Eliminate xmit_more from struct hv_netvsc_packetKY Srinivasan4-9/+8
Eliminate xmit_more from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: Eliminate completion_func from struct hv_netvsc_packetKY Srinivasan3-5/+0
Eliminate completion_func from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: Eliminate is_data_pkt from struct hv_netvsc_packetKY Srinivasan4-9/+8
Eliminate is_data_pkt from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: Eliminate send_completion_tid from struct hv_netvsc_packetKY Srinivasan4-33/+19
Eliminate send_completion_tid from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: Eliminate page_buf from struct hv_netvsc_packetKY Srinivasan4-31/+35
Eliminate page_buf from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: remove locking in netvsc_send()Vitaly Kuznetsov2-9/+0
Packet scheduler guarantees there won't be multiple senders for the same queue and as we use q_idx for multi_send_data the spinlock is redundant. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: move subchannel existence check to netvsc_select_queue()Vitaly Kuznetsov3-18/+5
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: Don't ask for additional head room in the skbKY Srinivasan2-19/+14
The rndis header is 116 bytes big and can be placed in the default head room that will be available in the skb. Since the netvsc packet is less than 48 bytes, we can use the skb control buffer for the netvsc packet. With these changes we don't need to ask for additional head room. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: Eliminate send_completion_ctx from struct hv_netvsc_packetKY Srinivasan3-4/+1
Eliminate send_completion_ctx from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: Eliminate send_completion from struct hv_netvsc_packetKY Srinivasan4-7/+6
Eliminate send_completion from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: Eliminatte the data field from struct hv_netvsc_packetKY Srinivasan4-10/+14
Eliminatte the data field from struct hv_netvsc_packet. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: Eliminate rndis_msg pointer from hv_netvsc_packet structureKY Srinivasan4-14/+13
Eliminate rndis_msg pointer from hv_netvsc_packet structure. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: Eliminate the channel field in hv_netvsc_packet structureKY Srinivasan4-21/+35
Eliminate the channel field in hv_netvsc_packet structure. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: Rearrange the hv_negtvsc_packet to be space efficientKY Srinivasan1-8/+10
Rearrange the elements of struct hv_negtvsc_packet for optimal layout - eliminate unnecessary padding. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02hv_netvsc: Resize some of the variables in hv_netvsc_packetKY Srinivasan1-7/+7
As part of reducing the size of the hv_netvsc_packet, resize some of the variables based on their usage. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-01hv_netvsc: rework link status change handlingVitaly Kuznetsov2-48/+108
There are several issues in hv_netvsc driver with regards to link status change handling: - RNDIS_STATUS_NETWORK_CHANGE results in calling userspace helper doing '/etc/init.d/network restart' and this is inappropriate and broken for many reasons. - link_watch infrastructure only sends one notification per second and in case of e.g. paired disconnect/connect events we get only one notification with last status. This makes it impossible to handle such situations in userspace. Redo link status changes handling in the following way: - Create a list of reconfig events in network device context. - On a reconfig event add it to the list of events and schedule netvsc_link_change(). - In netvsc_link_change() ensure 2-second delay between link status changes. - Handle RNDIS_STATUS_NETWORK_CHANGE as a paired disconnect/connect event. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01flow_dissector: Add flags argument to skb_flow_dissector functionsTom Herbert1-1/+1
The flags argument will allow control of the dissection process (for instance whether to parse beyond L3). Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18hv_netvsc: Fix dereference of nvdev before checkAndrew Schwartzmeyer1-2/+5
Passes static analysis by Smatch. Signed-off-by: Andrew Schwartzmeyer <andschwa@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12hv_netvsc: Implement set_channels ethtool opAndrew Schwartzmeyer1-0/+97
This enables the use of ethtool --set-channels devname combined N to change the number of vRSS queues. Separate rx, tx, and other parameters are not supported. The maximum is rsscap.num_recv_que. It passes the given value to rndis_filter_device_add through the device_info->num_chn field. If the procedure fails, it attempts to recover to the prior state. If the recovery fails, it logs an error and aborts. Current num_chn is saved and restored when changing the MTU. Signed-off-by: Andrew Schwartzmeyer <andschwa@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.