aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ieee802154/mrf24j40.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-07-11drivers/net/ieee802154: don't use devm_pinctrl_get_select_default() in probeWolfram Sang1-7/+0
Since commit ab78029 (drivers/pinctrl: grab default handles from device core), we can rely on device core for setting the default pins. Compile tested only. Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-09mrf24j40: use module_spi_driver to simplify the codeWei Yongjun1-12/+1
module_spi_driver() makes the code simpler by eliminating boilerplate code. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08mrf24j40: Enable link-layer acknowledgement and retryAlan Ott1-2/+5
On the MRF24J40, link-layer acknowledgment request and retry must be turned on explicitly for each packet. Turn this on in the hardware based on the FC_ACK_REQ bit being set in the packet. Also, now that failure to receive an ACK will cause the hardware to report failure of transmission, change the log level for this failure to debug level. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-07net: ieee802154: mrf24j40: use spi_get_drvdata() and spi_set_drvdata()Jingoo Han1-3/+3
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19mrf24j40: Fix byte-order of IEEE addressAlan Ott1-1/+1
Load the 64-bit Extended (IEEE) address into the hardware in the proper byte order. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19mrf24j40: Increase max SPI speed to 10MHzAlan Ott1-3/+2
Upon consulting the datasheet further, it does indicates a maximum speed for SCK at 10MHz. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19mrf24j40: Warn if transmit interrupts timeoutAlan Ott1-0/+1
Issue a warning if a transmit complete interrupt doesn't happen in time. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19mrf24j40: pinctrl supportAlan Ott1-0/+7
Activate pinctrl settings when used with a DT system. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03ieee802154: remove __dev* attributesBill Pemberton1-3/+3
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-02workqueue: avoid using deprecated functionsLinus Torvalds1-1/+1
The network merge brought in a few users of functions that got deprecated by the workqueue cleanups: the 'system_nrt_wq' is now the same as the regular system_wq, since all workqueues are now non- reentrant. Similarly, remove one use of flush_work_sync() - the regular flush_work() has become synchronous, and the "_sync()" version is thus deprecated as being superfluous. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-04ieee802154: MRF24J40 driverAlan Ott1-0/+767
Driver for the Microchip MRF24J40 802.15.4 WPAN module. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.