aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ieee802154 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-05-31cc2520: fix CC2591 handlingVarka Bhadram1-2/+8
This patch changes tha way of handling of cc2591-cc2520 combination by moving amplified variable from platform data to private data. This will be useful in other sections like tx power support. Signed-off-by: Varka Bhadram <varkab@cdac.in> Cc: Brad Campbell <bradjc5@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-31cc2520: fix in default tx power settingVarka Bhadram1-8/+0
Initially we dont have the tx power settings from the user-space. Now we have the support for seeting the tx power level. So lets use the default tx power setting for the radio. Signed-off-by: Varka Bhadram <varkab@cdac.in> Cc: Brad Campbell <bradjc5@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-31ieee802154/atusb: Add .set_promiscuous_mode driver operationStefan Schmidt1-1/+29
Allow monitor mode operation with disabled AACK in hardware. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-31ieee802154/atusb: Add .set_txpower operation to the driverStefan Schmidt1-0/+26
Atusb uses the at86rf231 transceiver so we can use the same calculation for txpower settings for it. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-31ieee802154/atusb: Add function for partial register writesStefan Schmidt1-18/+27
With this function we can set individual bits in the registers if needed. With the old SR_VALUE macro we could only set one bit in the register which was ok for some scenarios but not for all. With this subreg write function we can now set more bits defined by the mask while not touching the rest. We start using it for the current SR_VALUE use case and will use it more in upcoming patches. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-27atusb: add support for at86rf230Alexander Aring1-1/+1
This patch adds support for the at86rf230 version check which is used by the rzusb stick. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-21ieee802154/atusb: Set default ed level to 0xbe like the rest of these driversStefan Schmidt1-2/+2
Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-21ieee802154/atusb: Mark driver as AACK enabled in hardware.Stefan Schmidt1-1/+2
Since firmware version 0.2 we use AACK handling directly in the firmware. Inform the stack that the hardware supports and uses it. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-21ieee802154/atusb: Warn about outdated device firmware.Stefan Schmidt1-0/+6
Together with mainlining the driver we released a first public binary version of the device firmware. This is version 0.2. With this change we warn users who run outdated versions of the firmware. While we have not seen problems with it yet (thus no error, but a warning only) it would be better to run the released and tested firmware. You can find released versions here: http://downloads.qi-hardware.com/people/werner/wpan/web/ Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-20at86rf230: add missing cca ed level valuesAlexander Aring1-2/+2
This patch add missing values for at86rf212 ed level values. Currently there are 15 values and the register setting supports 16 different ed level values. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reported-by: Craig Younkins <craig@freshtemp.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19fakelb: cleanup codeAlexander Aring1-17/+12
This patch just cleanups the code at several places. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19fakelb: add support for async xmit handlingAlexander Aring1-1/+2
This patch will add async xmit support for the fakelb driver. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19fakelb: remove fakelb_hw_deliverAlexander Aring1-12/+6
This patch cleanups the fakelb_hw_deliver function by removing them. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19fakelb: add virtual phy reset defaultsAlexander Aring1-0/+5
This patch adds reset defaults for the fakelb phy. I used the channel 13 and page 0 which is the same default like at86rf233. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19fakelb: use own channel and page attributesAlexander Aring1-3/+10
This patch adds an own phy attribute for page and channel into fakelb_phy. The current way is to use the internal mac802154 stored phy pib values which can occur in locking issues while using it inside the driver layer. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19fakelb: introduce fakelb ifup phys listAlexander Aring1-33/+25
This patch introduce a fakelb ifup phys list, which stores all registered phys which are in an operated mode. This will reduce the iterations of non-operated phys while transmit frames. There exists two locks now, one rwlock for the operated interfaces and the spinlock for protecting the list for all registered virtual phys. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19fakelb: move lock out of iterationAlexander Aring1-3/+4
The list need to be protected while iteration which is need when other list iterates at the same time over this list. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19fakelb: declare fakelb list staticAlexander Aring1-25/+7
This patch moves the fakelb list of all registered phy's in a static declaration in the fakelb driver. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19fakelb: declare rwlock staticAlexander Aring1-9/+7
This patch moves the rwlock declarition into a static variable. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19fakelb: don't deliver when one phyAlexander Aring1-12/+8
A real phy don't transmit the transmitted frame back to the phy. This behaviour will confuse the 6LoWPAN and the upper IPv6 neighbour discovery cache. We need now at least two virtual phy's to creating a virtual wpan network. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19fakelb: rename fakelb_dev_priv to fakelb_phyAlexander Aring1-46/+47
This patch renames fakelb_dev_priv to fakelb_phy. We don't faking devices here, we fake wpan phys. This avoids also confusing with the variable priv, which is used several times in this driver to represent this structure. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19fakelb: use list_for_each_entry_safeAlexander Aring1-2/+2
Iterate and removing items from a list, we should use list_for_each_entry_safe instead list_for_each_entry to avoid accidents by removing. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19fakelb: creating two virtual phys per defaultAlexander Aring1-1/+1
This patch change the default virtual wpan phys of fakelb driver from one to two. To have one virtual phy makes no sense, because it need at least two virtual phy's to speak to each other. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19ieee802154: add support for atusb transceiverAlexander Aring6-197/+1009
This patch adds support for the atusb transceiver. The current driver supports basic functionality only. Possible further tasks would be to sync functionality with the at86rf230 driver, because the atusb use internally an at86rf231 transceiver. Some of these features need a firmware update like AACK and ARET handling. I did small changes to this driver to work with xmit_async callback and setting of a random extended perm address. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Werner Almesberger <werner@almesberger.net> Cc: Stefan Schmidt <s.schmidt@samsung.com> Cc: Richard Sharpe <realrichardsharpe@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19at86rf230: fix callback for aret handlingAlexander Aring1-1/+1
This patch fix the complete callback for going into aret on. Currently we starting after a state change into aret on again a state change into aret on which is not necessary. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19mac802154: fakelb: Fix potential NULL pointer dereference.Martin Townsend1-1/+2
fakelb_hw_deliver creates a copy of the skb's header which can potentially return NULL so we now check for this before actually delivering to the 802.15.4 MAC layer. Signed-off-by: Martin Townsend <martin.townsend@xsilon.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19at86rf230: add reset states of tx power levelAlexander Aring1-0/+1
This patch adds the reset states for tx power levels after running reset procedure. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19at86rf230: add cca ed level reset valueAlexander Aring1-2/+5
This patch adds reset values for cca ed level values after running reset procedure. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19at86rf230: rework tx cca energy detection levelAlexander Aring1-20/+59
This patch reworks the cca energy detection level handling. This contains a calculation which works on all transceiver types and add support for dump cca energy detection levels. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19at86rf230: rework tx power supportAlexander Aring1-19/+64
This patch adds support for get transmit power levels and reworks the set of transmit power levels which was broken before. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19at86rf230: set cca_modes supported flagsAlexander Aring1-0/+6
This patch sets the at86rf230 supported cca modes. In case of at86rf212 it also can support listen before transmit. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19cfg802154: introduce wpan phy flagsAlexander Aring1-2/+7
This patch introduce a flag property for the wpan phy structure. The current flag settings in ieee802154_hw are accessable in mac802154 layer only which is okay for flags which indicates MAC handling which are done by phy. For real PHY layer settings like cca mode, transmit power, cca energy detection level. The difference between these flags are that the MAC handling flags are only handled in mac802154/HardMac layer e.g. on an interface up. The phy settings are direct netlink calls from nl802154 into the driver layer and the nl802154 need to have a chance to check if the driver supports this handling before sending to the next layer. We also check now on PHY flags while dumping and setting pib attributes. In comparing with MIB attributes the 802.15.4 gives us an default value which we assume when a transceiver implement less functionality. In case of MIB settings the nl802154 layer doesn't need to check on the ieee802154_hw flags then. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19ieee802154: introduce wpan_phy_supportedAlexander Aring4-21/+21
This patch introduce the wpan_phy_supported struct for wpan_phy. There is currently no way to check if a transceiver can handle IEEE 802.15.4 complaint values. With this struct we can check before if the transceiver supports these values before sending to driver layer. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Suggested-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Acked-by: Varka Bhadram <varkabhadram@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19ieee802154: change cca ed level to mbmAlexander Aring1-1/+2
This patch change the handling of cca energy detection level from dbm to mbm. This prepares to handle floating point cca energy detection levels values. The old netlink 802.15.4 will convert the dbm value to mbm for handling backward compatibility. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19ieee802154: change transmit power to mbmAlexander Aring1-1/+2
This patch change the handling of transmit power level from dbm to mbm. This prepares to handle floating point transmit power levels values. The old netlink 802.15.4 will convert the dbm value to mbm for handling backward compatibility. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19ieee802154: change transmit power to s32Alexander Aring1-1/+1
This patch change the transmit power from s8 to s32. This prepares to store a mbm value instead dbm inside the transmit power variable. The old interface keep the a s8 dbm value, which should be backward compatibility when assign s8 to s32. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-04-30at86rf230: add slp_tr support to start txAlexander Aring1-6/+21
This patch adds support for one of the slp_tr gpio use cases which indicates the TX_START command without doing some spi bus traffic. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-04-30at86rf230: change state change if from trx_offAlexander Aring1-6/+18
If a transmit ends in a calibration which means the transceiver do a TRX_OFF state change, we can directly change into TX_ARET state instead doing a TX_ON to TX_ARET statechange. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-04-30at86rf230: remove unnecessary tx state changeAlexander Aring1-13/+3
All supported transceivers can do a valid state change from TRX_OFF to AACK_ON. This patch removes the state change chain from TRX_OFF -> TX_ON -> AACK_ON instead we doing a directly state change from TRX_OFF to AACK_ON. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-04-30at86rf230: add TX_ARET_ON for calibration timeoutAlexander Aring1-2/+3
This patch adds a calibration timeout reset when change from TRX_OFF to TX_ARET_ON which also occurs a calibration. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-04-30at86rf230: move cal_timeout to state changeAlexander Aring1-3/+5
This patch moves the calculation timeout of TRX_OFF to RX_AACK_ON handling to the async state change functionality. With this patch we can do a reset of calculation timeout when others TRX_OFF to RX_AACK_ON happens instead of doing this on interface up only. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-04-30at86rf230: remove tabs after defineAlexander Aring1-152/+152
This patch cleanups the at86rf230 driver to use a space instead a tab after define. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-04-30at86rf230: Add macro for TRX STATE MASKChristoffer Holmstedt1-2/+4
Instead of using the 'magic' number of 0x1f the TRX_STATE_MASK macro is introduced. Signed-off-by: Christoffer Holmstedt <christoffer.holmstedt@gmail.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-04-09mac802154: fix transmission power datatypeVarka Bhadram1-1/+1
Netlink attribute for the power is s8. But for the driver level operations we are collection power level value into integer. It has to be change to s8 from int. Signed-off-by: Varka Bhadram <varkab@cdac.in> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-27at86rf230: fix is_tx while error handlingAlexander Aring1-0/+1
This patch fix the error handling when is_tx is true. The error handling tries to get the transceiver into RX_AACK_ON mode then we need to be sure that is_tx is false. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-27at86rf230: remove unnecessary spinlockAlexander Aring1-9/+0
This spinlock isn't necessary because if we are in TX_ON/TX_ARET_ON state the transceiver can't be interrupted e.g. by receiving a frame when a SHR was detected. In this time the transceiver doesn't leave the TX_ON/TX_ARET_ON state until the tx complete irq change the state into RX_AACK_ON again. This means a receiving interrupt in state TX_ON/TX_ARET_ON can't happen and is_tx is protected by transceiver. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-18cc2520: Add support for CC2591 amplifier.Brad Campbell1-8/+47
The TI CC2521 is an RF power amplifier that is designed to interface with the CC2520. Conveniently, it directly interfaces with the CC2520 and does not require any pins to be connected to a microcontroller/processor. Adding a CC2591 increases the CC2520's range, which is useful for border router and other wall-powered applications. Using the CC2591 with the CC2520 requires configuring the CC2520 GPIOs that are connected to the CC2591 to correctly set the CC2591 into TX and RX modes. Further, TI recommends that the CC2520_TXPOWER and CC2520_AGCCTRL1 registers are set differently to maximize the CC2591's performance. These settings are covered in TI Application Note AN065. This patch adds an optional `amplified` field to the cc2520 entry in the device tree. If present, the CC2520 will be configured to operate with a CC2591. The expected pin mapping is: CC2520 GPIO0 --> CC2591 EN CC2520 GPIO5 --> CC2591 PAEN Signed-off-by: Brad Campbell <bradjc5@gmail.com> Acked-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-18cc2520: Do not store platform_data in spi_deviceBrad Campbell1-49/+46
Storing the `platform_data` struct inside of the SPI struct when using the device tree allows for a later function to edit the content of that struct. This patch refactors the `cc2520_get_platformat_data` function to accept a pointer to a `cc2520_platform_data` struct and populates the fields inside of it. This change mirrors commit aaa1c4d226e4cd730075d3dac99a6d599a0190c7 ("at86rf230: copy pdata to driver allocated space"). Signed-off-by: Brad Campbell <bradjc5@gmail.com> Acked-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-17at86rf230: fix at86rf230_read_subreg succeed handlingAlexander Aring1-1/+1
This patch fix an issue when at86rf230_read_subreg was successful. The function at86rf230_read_subreg will directly call regmap_read which returns zero on successful. Nobody figured out issues yet because it was only necessary to evaluate dvdd state while probing. This could make trouble because the stack variable could have an random value. The function is also used by reset the irq line before requesting irq, but the value isn't evaluated afterwards. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-14at86rf230: fix volatile regmap registersAlexander Aring1-0/+2
These registers are also changed by transceiver and should be volatile for right accessing via regmap debugfs. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.