aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ieee802154 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-07-12mrf24j40: avoid uninitialized byte in SPI transfer to radio.Walter Mack1-0/+2
isr function issues SPI read command to mrf to obtain INTSTAT. SPI transfer is 2 bytes, but value of 2nd byte is not defined. This had the effect that only the first ISR worked as intended. The second ISR read incorrect INTSTAT values. Observed on Raspberry PI B+. Signed-off-by: Walter Mack <wmack@componentsw.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-08fakelb: allow to run as monitorAlexander Aring1-0/+8
For my RIOT-OS in userspace experiments I need to create a fakelb monitor interface. The fakelb doesn't filter anything on L2 and is a purely raw interface. Because nl802154 checks on promiscuous mode which need to supported by creating monitors this patch adds some no-op promiscuous mode setting and the promiscuous flag. Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-08atusb: don't change csma settings while set channelAlexander Aring1-5/+1
This patch fixes the behaviour to not overwrite csma settings when set channel afterwards. Cc: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-05-19net: ieee802154/adf7242: syntax error ifdef DEBUGxypron.glpk@gmx.de1-1/+0
If DEBUG is defined, a superfluous closing brace is introduced. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21ieee802154: atusb: update my copyright years for this driverStefan Schmidt1-0/+2
Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-21ieee802154: atusb: implement .set_cca_mode ops callbackStefan Schmidt1-1/+43
Catching up with the stack here and implement CCA mode setting. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-21ieee802154: atusb: implement .set_cca_ed_level ops callbackStefan Schmidt1-1/+26
Catching up with the stack here and implement CCA ED level setting. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-21ieee802154: atusb: implement .set_csma_params ops callbackStefan Schmidt1-1/+19
Catching up with the stack here and implement CSMA parameter setting. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-20at86rf230: increase sleep to off timingsAlexander Aring1-3/+3
I expierenced when setting channel while sleep mode it didn't changed the channel inside the hardware registers. Then I got another report of an user which has similar issues. I increased the sleep to off state change timing, which is according at86rf233 at maximum 1000 us. After this change I got no similar effects again. I tried another option to wait on AWAKE_END irq, which can be used to wait until the transceiver is awaked. I tested it and the IRQ took 4 seconds after starting state change. I don't believe it takes 4 seconds to go into the TRX_OFF state from SLEEP state. The alternative is to increase the timings which seems to work. Cc: Oleg Hahm <oliver.hahm@inria.fr> Signed-off-by: Alexander Aring <aar@pengutronix.de> Reviewed-by: Stefan Schmidt<stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-13mrf24j40: apply the security-enabled bit on secured outbound framesAlexandre Macabies1-0/+4
We set the TXNSECEN bit of register TXNCON to on when transmitting a security-enabled frame, as described in section 3.12.2 of the MRF datasheet. Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Alexandre Macabies <web+oss@zopieux.com> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-13mrf24j40: fix security-enabled processing on inbound framesAlexandre Macabies1-1/+9
When receiving a security-enabled IEEE 802.15.4 frame, the MRF24J40 triggers a SECIF interrupt that needs to be handled for RX processing to keep functioning properly. This patch enables the SECIF interrupt and makes the MRF ignores all hardware processing of security-enabled frames, that is handled by the ieee802154 stack instead. Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Alexandre Macabies <web+oss@zopieux.com> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-08ieee802154/adf7242: fix memory leak of firmwareSudip Mukherjee1-0/+2
If the firmware upload or the firmware verification fails then we printed the error message and exited but we missed releasing the firmware. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23mrf24j40: add writeable missing regAlexander Aring1-0/+1
This patch adds a missing reg for writeable stuff for regmap. Cc: Alan Ott <alan@signal11.us> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23at86rf230: fix state change handling on errorAlexander Aring1-4/+3
This patch force always to set "is_tx_from_off", when calibration timeout was not occurred. In case of error handling the is_tx_from_off can be inside in an invalid state. Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23at86rf230: fix race on error handlingAlexander Aring1-4/+14
The resource "ctx" can be still used by at86rf230_async_state_change, we need to free it at the complete handler of the async state change to avoid a use after free. Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-03ieee802154: cc2520: Check CRC & add promiscuousBrad Campbell1-23/+122
This patch adds checking the "CRC_OK" bit at the end of packets coming from the CC2520 radio. It also adds support for putting the radio in promiscuous mode (in which packets are not dropped if the CRC fails). In promiscuous mode the AUTOCRC flag is cleared so that the driver can pass the received CRC to the monitors. The radio now defaults to frame filtering (checking that the destination and PANID in the incoming packet matches the local node). This matches the other 15.4 radios and is what a user would expect to be the default. Other changes: 1. Adds LQI calculation 2. Makes #defines for relevant bit fields in CC2520 registers Signed-off-by: Brad Campbell <bradjc5@gmail.com> Acked-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-11ieee802154/adf7242: Driver for ADF7242 MAC IEEE802154Michael Hennerich3-0/+1297
This driver has been sitting in the linux-zigbee[2] repository for a long time. We updated it from time to time and made it available via our github kernel repository. The Linux MAC802.15.4 support has improved a lot since then. Thanks to all! So it’s finally time to upstream this driver. The ADF7242 requires an add-on firmware for the automatic IEEE 802.15.4 operating modes. The firmware file is currently made available on the ADF7242 wiki page here [1] [1] http://wiki.analog.com/resources/tools-software/linux-drivers/networking-mac802154/adf7242 [2] http://sourceforge.net/p/linux-zigbee/kernel/ci/devel/tree/drivers/ieee802154/adf7242.c Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-11ieee802154-atusb: Delete an unnecessary check before the function call "kfree_skb"Markus Elfring1-2/+1
The kfree_skb() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-05Merge tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds3-3/+0
Pull spi updates from Mark Brown: "Quite a lot of activity in SPI this cycle, almost all of it in drivers with a few minor improvements and tweaks in the core. - Updates to pxa2xx to support Intel Broxton and multiple chip selects. - Support for big endian in the bcm63xx driver. - Multiple slave support for the mt8173 - New driver for the auxiliary SPI controller in bcm2835 SoCs. - Support for Layerscale SoCs in the Freescale DSPI driver" * tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits) spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI spi: pxa2xx: Add support for Intel Broxton spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals spi: pxa2xx: Add output control for multiple Intel LPSS chip selects spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific spi: Add DSPI support for layerscape family spi: ti-qspi: improve ->remove() callback spi/spi-xilinx: Fix race condition on last word read spi: Drop owner assignment from spi_drivers spi: Add THIS_MODULE to spi_driver in SPI core spi: Setup the master controller driver before setting the chipselect spi: dw: replace magic constant by DW_SPI_DR spi: mediatek: mt8173 spi multiple devices support spi: mediatek: handle controller_data in mtk_spi_setup spi: mediatek: remove mtk_spi_config spi: mediatek: Update document devicetree bindings to support multiple devices spi: fix kernel-doc warnings about missing return desc in spi.c spi: fix kernel-doc warnings about missing return desc in spi.h spi: pxa2xx: Align a few defines spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select ...
2015-10-28spi: Drop owner assignment from spi_driversAndrew F. Davis3-3/+0
An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-24mrf24j40: remove trailing semicolonAlexander Aring1-1/+1
This patch removes a trailing semicolon which was introduced by commit d3f1bc3 ("mrf24j40: add cca mode support") and reported by kbuild test robot. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: replace magic numbersAlexander Aring1-38/+98
This patch replaces some magic numbers with defines for register bits, mask and shifts. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: change irq trigger type behaviourAlexander Aring1-3/+28
This patch changes the irq trigger type value while calling devm_request_irq by using IRQF_TRIGGER_LOW when no irq type was given. Additional we add support for change the irq polarity while hw init if high level or low level triggered irq type are given. For rising edge triggered irq's the mrf24j40 can't deal with that, this races at position of tx completion irq, while the irq is disabled we readout the irq status registers. This will resets the irq line so other irq's can occur. Wile readout the irq status register the irq is still disabled and edge triggered interrupts will be ignored. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: add promiscuous mode supportAlexander Aring1-1/+21
This patch adds support for promiscuous mode by setting promiscuous (no frame filtering), disable automatic ack handling and not filtering frames where the crc is invalid. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: add tx power supportAlexander Aring1-0/+71
This patch supports setting of transmit power for the mrf24j40ma transceiver only. The mrf24j40mc has some amplifier to change the transmit power, I am currently not sure how the mapping for this amplifier looks like. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: add cca ed level supportAlexander Aring1-1/+49
This patch supports handling to set the cca energy detection level for the mrf24j40 transceiver. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: add cca mode supportAlexander Aring1-0/+40
This patch supports cca mode handling for mrf24j40. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: add csma params supportAlexander Aring1-1/+26
This patch adds supports to change the CSMA parameters. The datasheet doesn't say anything about max_be value. Seems not configurable and we assume the 802.15.4 default. But this value must exists because there is a min_be value. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: async interrupt handlingAlexander Aring1-53/+40
This patch removes the threaded irq handling and do a hardirq instead. We need to switch to spi_async for this step for getting the irq status register. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: rework rx handling to async rx handlingAlexander Aring1-164/+118
This patch prepares that we can do the receive handling inside interrupt context by using spi_async. This is necessary for introduce a non-threaded irq handling. Also we drop the bit setting for "RXDECINV" at register "BBREG1", we do a driectly full write of register "BBREG1", because it contains the bit RXDECINV only. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: rework tx handling to async tx handlingAlexander Aring1-83/+78
This patch reworks the current transmit API to spi_async handling. We removed the error handling check, because mac802154 has no chance to report it. Also the transmit timeout handling can't be handled by xmit async handling, for this usecase we need to implement the netdev watchdog. These are all unlikely cases which we drop now and should be provided by netdev watchdog. We also drop the bit setting for TXNACKREQ at register TXNCON, this is not necessary. The TXNCON register should set only once for each frame, previous settings doesn't matter. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: change to frame delivery with crcAlexander Aring1-4/+1
This patch changes the frame delivery to mac802154 with crc. This is useful for monitor interface types which deliver the crc to userspace. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: use regmap for register accessAlexander Aring1-97/+50
This patch uses the regmap functions for transceiver register settings where it's possible. This means everything except the hotpaths like receive/transmit handling. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: add regmap supportAlexander Aring2-0/+313
This patch introduce regmap support for short and long address space of mrf24j40. It's only possible to use regmap_read/write/update_bits for long address range. This is because I added lowlevel bus operation because the write operation need to set the 12th bit to mark a register write, but regmap only supports to set bits for register write access in the first byte. We use other regmap register functions than read/write/update_bits, so this should be fine. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: add more register definesAlexander Aring1-0/+68
For supporting regmap, this patch will add more register defines to prepare a full register dump by regmap debugfs. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: add random extended addr generationAlexander Aring1-0/+1
The mrf24j40 has no source to get a permanent extended address. This patch will add a random generated permanent extended address source. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: add default channel settingAlexander Aring1-0/+7
Per default mrf24j40 has the channel 11 after reset. This patch adds the right phy default value for the channel setting. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: add device-tree supportAlexander Aring1-0/+9
This patch adds devicetree support to mrf24j40 with proper devicetree compatible strings. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: remove spi settings overwriteAlexander Aring1-3/+5
This patch removes spi settings while mrf24j40 probing. These settings cannot be overwrite while device probing where spi controller should be already configured. These settings need to be setup by device tree or platform data. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: calling ieee802154_register_hw at lastAlexander Aring1-10/+7
The function ieee802154_register_hw should always called at last. Currently we do hardware init and such things after register hardware into the subsystem. It could be that the subsystem already call driver operations while running hardware init. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: use ieee802154_alloc_hw for private dataAlexander Aring1-16/+15
This patch removes the own private dataroom allocation by calling devm_kzalloc for devrec and assign this pointer to "devrec->hw->priv". Instead we using like all other drivers ieee802154_alloc_hw and give the size for the private driver dataroom at the first argument. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22mrf24j40: cleanup define identationAlexander Aring1-38/+38
This patch replaces the spaces after define by a tab. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22at86rf230: support edge triggered irqAlexander Aring1-122/+89
This patch adds support for edge triggered irq types. We remove the locking for irq resources by enable/disable irq and allocate directly some heap buffer at isr. We have still a enable/disable irq path but this is for level-triggered irq's which need to be disabled until spi_async clear the irq line. There is usually a little race condition between "irq line cleared" and "enable_irq". When in this time a edge triggered irq arrived, we will not recognize this interrupt. This case can't happend at at86rf230. The reason is that we unmask TRX_END irq's only which indicates a transmit or receive completion, which depends on the current state. On Transmit: TRX_END arrived and transceiver is in TX_ARET_ON state again, in this state no other TRX_END can happen until we leave the state. On Receive: This is protected with the RX_SAFE_MODE bit which leaves the transceiver in RX_AACK_BUSY until we readed the framebuffer. In this state no other TRX_END can happen. Tested with RPi where I first detected issues between edge/level irq's. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-21drivers/net/ieee802154/at86rf230.c: seq_printf() now returns NULLStephen Rothwell1-25/+10
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Alexander Aring <alex.aring@gmail.com> Cc: Stefan Schmidt <stefan@osg.samsung.com> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-17atusb: add handling for different chipnamesAlexander Aring1-2/+11
This patch supports handling for printout different chipnames between atusb and rzusb. The rzusb contains an at86rf230 and atusb an at86rf231 transceiver. Cc: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17at86rf230: detailed edge triggered irq warningAlexander Aring1-1/+1
This patch introduce a more detailed information why edge triggered irq's are currently not recommended. It could be that rising/falling edge detection can happen while the irq is disabled. Suggested-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17at86rf230: add debugfs supportAlexander Aring3-14/+159
This patch introduce debugfs support for collect trac status stats. To clear the stats ifdown the interface of at86rf230 and start the interface again. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17at86rf230: interrupt tx with force trx_offAlexander Aring1-9/+1
To abort a TX_ARET_BUSY state it's recommended to switch into TRX_OFF state by doing STATE_TRX_FORCE_OFF. This patch will do always a TRX_OFF state change when the transceiver stucks in any state. From TRX_OFF we can switch to the states which are also possible by TX_ON state. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17at86rf230: change trac status check behaviourAlexander Aring1-25/+4
When transmit is done, indicated by trx_end irq, we do first a force state change to TX_ON and then checking the trac status, if the trac status is unequal zero we do a state change to TRX_OFF. This patch changes to the following behaviour, we first check on trac status after trx_end occurs and then doing a normal change to TX_ON without do the state change to TRX_OFF when trac status is unequal zero. The reasons are that the datasheet doesn't described when the trac status register is cleared, we should doing to evaluate the trac status at first. The reason to remove the TRX_OFF change if the trac status is unequal to zero and it was force is the following paragraph inside The at86rf2xx datasheets: "Using FORCE_PLL_ON to interrupt an TX_ARET transaction, it is recommended to check register bits [7:5] of register address 0x32 for value 0. If this value is different, TRX_CMD sequence FORCE_TRX_OFF shall be used immediately followed by TRX_CMD sequence PLL_ON. This performs a state transition to PLL_ON." The meaning is here "to interrupt an TX_ARET transaction" in case of trx_end interrupt the "TX_ARET transaction" is already done and we don't interrupt the "TX_ARET transaction" by doing the change to TX_ON (PLL_ON) here. Additional I changed the force change to normal TX_ON which seems to work here. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-11cc2520: set the default fifo pin value from platform dataYong Li1-0/+1
When the device tree support is disabled, the fifo_pin is uninitialized, this patch will set the fifo_pin value based on platform data Signed-off-by: Yong Li <sdliyong@gmail.com> Acked-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.