aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/macvlan.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2014-12-09ipvlan: move the device check function into netdevice.hMahesh Bandewar3-15/+15
Move the port check [ipvlan_dev_master()] and device check [ipvlan_dev_slave()] functions to netdevice.h and rename them netif_is_ipvlan_port() and netif_is_ipvlan() resp. to be consistent with macvlan api naming. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09ipvlan: play well with macvlan deviceMahesh Bandewar1-0/+6
If a device is already a macvlan port then refuse to use it as an ipvlan port in the early stage of port creation. thost1:~# ip link add link eth0 mvl0 type macvlan thost1:~# echo $? 0 thost1:~# ip link add link eth0 ipvl0 type ipvlan RTNETLINK answers: Device or resource busy thost1:~# echo $? 2 thost1:~# Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09netdevice: Add a function to check macvlan portMahesh Bandewar1-0/+5
Similar to a check for macvlan device, netif_is_macvlan(), add another function to check if a device is used as macvlan port. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09dst: no need to take reference on DST_NOCACHE dstsHannes Frederic Sowa3-47/+4
Since commit f8864972126899 ("ipv4: fix dst race in sk_dst_get()") DST_NOCACHE dst_entries get freed by RCU. So there is no need to get a reference on them when we are in rcu protected sections. Cc: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Reviewed-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09dummy: add support for ethtool get_drvinfoFlavio Leitner1-2/+17
The command 'ethtool -i' is useful to find details about the interface like the device driver being used. This was missing for dummy driver. Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09Documentation (ixgbe.txt): use a decimal address.Rami Rosen1-1/+1
This patch fixes the erronous usage of an hexadecimal address in the example, by replacing it with a decimal address. Signed-off-by: Rami Rosen <ramirose@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09openvswitch: set correct protocol on route lookupJiri Benc1-1/+1
Respect what the caller passed to ovs_tunnel_get_egress_info. Fixes: 8f0aad6f35f7e ("openvswitch: Extend packet attribute for egress tunnel info") Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09macvlan: allow setting LRO independently of lower deviceMichal Kubeček1-4/+5
Since commit fbe168ba91f7 ("net: generic dev_disable_lro() stacked device handling"), dev_disable_lro() zeroes NETIF_F_LRO feature flag first for a macvlan device and then for its lower device. As an attempt to set NETIF_F_LRO to zero is ignored, dev_disable_lro() issues a warning and taints kernel. Allowing NETIF_F_LRO to be set independently of the lower device consists of three parts: - add the flag to hw_features to allow toggling it - allow setting it to 0 even if lower device has the flag set - add the flag to MACVLAN_FEATURES to restore copying from lower device on macvlan creation Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09i40e/i40evf: Convert macro to static inlineJeff Kirsher2-2/+8
Inline functions are preferred over macros when they can be used interchangeably. CC: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09i40e: add to NVM update debug messageShannon Nelson1-2/+4
Add a little more state context to an NVM update debug message. Change-ID: I512160259052bcdbe5bdf1adf403ab2bf7984970 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09i40e: check for AQ timeout in aq_rc decodeShannon Nelson3-14/+33
Decoding the AQ return code is great except when the AQ send timed out and there's no return code set. This changes the handy decoder interface to help catch and properly report the condition as a useful errno rather than returning a misleading '0'. Change-ID: I07a1f94f921606da49ffac7837bcdc37cd8222eb Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09i40e: poll on NVM semaphore only if not other errorShannon Nelson1-4/+9
Only poll on the NVM semaphore if there's time left on a previous reservation. Also, add a little more info to debug messages. Change-ID: I2439bf870b95a28b810dcb5cca1c06440463cf8a Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09i40e: fix up NVM update sm error handlingShannon Nelson1-10/+16
The state transitions after an error were not managed well, so these changes get us back to the INIT state or don't transition out of the INIT state after most errors. Change-ID: I90aa0e4e348dc4f58cbcdce9c5d4b7fd35981c6c Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Michal Kosiarz <michal.kosiarz@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09i40e: set max limit for access pollingShannon Nelson3-15/+10
Don't bother trying to set a smaller timeout on the polling, just simplify the code and always use the max limit. Also, rename a variable for clarity and fix a comment. Change-ID: I0300c3562ccc4fd5fa3088f8ae52db0c1eb33af5 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Michal Kosiarz <michal.kosiarz@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09i40e: remove unused nvm_semaphore_waitShannon Nelson3-4/+0
The nvm_semaphore_wait field is set but never used, so let's just get rid of it. Change-ID: I2107bd29b69f99b1a61d7591d087429527c9d8fa Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Michal Kosiarz <michal.kosiarz@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09i40e: init NVM update state on adminq initShannon Nelson1-0/+2
The adminq init is run after the EMPR that is triggered by the NVM update. The final write command will cause the reset and will want to wait for the ARQ event that signals the end of the update, but the reset precludes the event being sent. The state is probably already at INIT, but we set it so here anyway, and clear the release_on_done flag as well. Change-ID: Ie9d724a39e71f988741abc3d51b4cb198c7e0272 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Michal Kosiarz <michal.kosiarz@intel.com> Acked-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09i40e: add range check to i40e_aq_rc_to_posixShannon Nelson2-0/+4
Just to be sure, add a range check to avoid any possible array index-out-of-bound issues. CC: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Change-ID: I9323bee6732c2a47599816e1d6c6b3a1f8dcbf54 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Michal Kosiarz <michal.kosiarz@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09i40e: rework debug messages for NVM updateShannon Nelson1-27/+80
Rework the debug messages in the NVM update state machine so that we can turn them on and off dynamically rather than forcing a recompile/reload. These can now be turned on with something like: ethtool -s eth1 msglvl 0xf000008f and off with: ethtool -s eth1 msglvl 0xf000000f The high 0xf0000000 gets the driver's attention that we want to change the internal debug flags, and the 0x80 bit is the NVM debug. Change-ID: I5efb9039400304b29a0fd6ddea3f47bb362e6661 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09i40e: let firmware catch the NVM busy errorShannon Nelson4-19/+0
The NVM update operations take time finish asynchronously, and follow-on update requests need to wait for the current one to finish. Early firmware didn't handle this well, so the code had to track the busy state. The released firmware handles the busy state correctly, returning I40E_AQ_RC_EBUSY if an update is still in progress, so the code no longer needs to track this. Change-ID: I6e6b4adc26d6dcc5fd7adfee5763423858a7d921 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09i40e: better error messages for NVM update issuesShannon Nelson1-19/+33
Add more detail to the NVM update error messages so folks have a better chance at diagnosing issues without having to resort to heroic measures to reproduce an issue. Change-ID: I270d1a9c903baceaef0bebcc55d29108ac08b0bd Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09i40e: clear NVM update state on ethtool testShannon Nelson1-0/+3
Once in a great while the NVMUpdate tools and the driver get out of phase with each other. This gives us a way to reset things without having to unload the driver. Change-ID: I353f688236249a666a90ba3e7233e0ed8c1a04e9 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09net: sched: cls_basic: fix error path in basic_change()Jiri Pirko1-3/+2
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09net: macb: Remove obsolete comment from KconfigJames Byrne1-2/+2
The Kconfig file says that Gigabit mode is not supported, but it has been supported since commit 140b7552fdff04bbceeb842f0e04f0b4015fe97b ("net/macb: Add support for Gigabit Ethernet mode"). Signed-off-by: James Byrne <james.byrne@origamienergy.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09net: ethernet: rocker: Add dependency to CONFIG_BRIDGE in KconfigAndreas Ruprecht1-1/+1
In a configuration with CONFIG_BRIDGE set to 'm' and CONFIG_ROCKER set to 'y', undefined references occur at link time: > drivers/built-in.o: In function `rocker_port_fdb_learn_work': > /home/jim/linux/drivers/net/ethernet/rocker/rocker.c:3014: undefined > reference to `br_fdb_external_learn_del' > /home/jim/linux/drivers/net/ethernet/rocker/rocker.c:3016: undefined > reference to `br_fdb_external_learn_add' This patch fixes these by declaring CONFIG_ROCKER as being dependent on CONFIG_BRIDGE. Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Andreas Ruprecht <rupran@einserver.de> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09net/socket.c : introduce helper function do_sock_sendmsg to replace reduplicate codeGu Zheng1-12/+10
Introduce helper function do_sock_sendmsg() to simplify sock_sendmsg{_nosec}, and replace reduplicate code. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09tcp_cubic: refine Hystart delay thresholdEric Dumazet1-1/+1
In commit 2b4636a5f8ca ("tcp_cubic: make the delay threshold of HyStart less sensitive"), HYSTART_DELAY_MIN was changed to 4 ms. The remaining problem is that using delay_min + (delay_min/16) as the threshold is too sensitive. 6.25 % of variation is too small for rtt above 60 ms, which are not uncommon. Lets use 12.5 % instead (delay_min + (delay_min/8)) Tested: 80 ms RTT between peers, FQ/pacing packet scheduler on sender. 10 bulk transfers of 10 seconds : nstat >/dev/null for i in `seq 1 10` do netperf -H remote -- -k THROUGHPUT | grep THROUGHPUT done nstat | grep Hystart With the 6.25 % threshold : THROUGHPUT=20.66 THROUGHPUT=249.38 THROUGHPUT=254.10 THROUGHPUT=14.94 THROUGHPUT=251.92 THROUGHPUT=237.73 THROUGHPUT=19.18 THROUGHPUT=252.89 THROUGHPUT=21.32 THROUGHPUT=15.58 TcpExtTCPHystartTrainDetect 2 0.0 TcpExtTCPHystartTrainCwnd 4756 0.0 TcpExtTCPHystartDelayDetect 5 0.0 TcpExtTCPHystartDelayCwnd 180 0.0 With the 12.5 % threshold THROUGHPUT=251.09 THROUGHPUT=247.46 THROUGHPUT=250.92 THROUGHPUT=248.91 THROUGHPUT=250.88 THROUGHPUT=249.84 THROUGHPUT=250.51 THROUGHPUT=254.15 THROUGHPUT=250.62 THROUGHPUT=250.89 TcpExtTCPHystartTrainDetect 1 0.0 TcpExtTCPHystartTrainCwnd 3175 0.0 Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09tcp_cubic: add SNMP counters to track how effective is HystartEric Dumazet3-9/+30
When deploying FQ pacing, one thing we noticed is that CUBIC Hystart triggers too soon. Having SNMP counters to have an idea of how often the various Hystart methods trigger is useful prior to any modifications. This patch adds SNMP counters tracking, how many time "ack train" or "Delay" based Hystart triggers, and cumulative sum of cwnd at the time Hystart decided to end SS (Slow Start) myhost:~# nstat -a | grep Hystart TcpExtTCPHystartTrainDetect 9 0.0 TcpExtTCPHystartTrainCwnd 20650 0.0 TcpExtTCPHystartDelayDetect 10 0.0 TcpExtTCPHystartDelayCwnd 360 0.0 -> Train detection was triggered 9 times, and average cwnd was 20650/9=2294, Delay detection was triggered 10 times and average cwnd was 36 Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09x86: bpf_jit_comp: Remove inline from static function definitionsJoe Perches1-9/+9
Let the compiler decide instead. No change in object size x86-64 -O2 no profiling Signed-off-by: Joe Perches <joe@perches.com> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09x86: bpf_jit_comp: Reduce is_ereg() code sizeJoe Perches1-5/+5
Use the (1 << reg) & mask trick to reduce code size. x86-64 size difference -O2 without profiling for various gcc versions: $ size arch/x86/net/bpf_jit_comp.o* text data bss dec hex filename 9266 4 0 9270 2436 arch/x86/net/bpf_jit_comp.o.4.4.new 10042 4 0 10046 273e arch/x86/net/bpf_jit_comp.o.4.4.old 9109 4 0 9113 2399 arch/x86/net/bpf_jit_comp.o.4.6.new 9717 4 0 9721 25f9 arch/x86/net/bpf_jit_comp.o.4.6.old 8789 4 0 8793 2259 arch/x86/net/bpf_jit_comp.o.4.7.new 10245 4 0 10249 2809 arch/x86/net/bpf_jit_comp.o.4.7.old 9671 4 0 9675 25cb arch/x86/net/bpf_jit_comp.o.4.9.new 10679 4 0 10683 29bb arch/x86/net/bpf_jit_comp.o.4.9.old Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09net: sched: cls: remove unused op put from tcf_proto_opsJiri Pirko10-49/+0
It is never called and implementations are void. So just remove it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09bnx2x: Use correct fastpath version for VFs.Yuval Mintz7-5/+88
Our FW can support several fastpath HSI [for backward compatibility] but up until now VFs were always configured to use latest fastpath HSI [although VF driver might be older and use an older fastpath HSI]. For linux drivers, the differences are insignificant since driver never utilized features that were overridden by the HSI change. But for VMs running other operating systems this might be a problem. In addition, eventually FW might change fastpath HSI in such a manner that backward compatibility WILL break unless configured with proper version. This patch fixes the issue for other operating system VMs, as well as lays the ground work for forward compatibility in regard to the fastpath HSI. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09net: tulip: Remove private "strncmp"Rasmus Villemoes1-17/+3
The comment says that the built-in strncmp didn't work. That is not surprising, as apparently "str" semantics are not really what is wanted (hint: de4x5_strncmp only stops when two different bytes are encountered or the end is reached; not if either byte happens to be 0). de4x5_strncmp is actually a memcmp (except for the signature and that bytes are not necessarily treated as unsigned char); since only the boolean value of the result is used we can just replace de4x5_strncmp with memcmp. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09drivers: net : cpsw: Update Kconfig for CPSWLokesh Vutla1-4/+4
CPSW is present in AM33xx, AM43xx, DRA7xx. Updating the Kconfig to depend on ARCH_OMAP2PLUS instead of listing all SoC's. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09tipc: fix missing spinlock init and nullptr oopsErik Hugne1-3/+6
commit 908344cdda80 ("tipc: fix bug in multicast congestion handling") introduced two bugs with the bclink wakeup function. This commit fixes the missing spinlock init for the waiting_sks list. We also eliminate the race condition between the waiting_sks length check/dequeue operations in tipc_bclink_wakeup_users by simply removing the redundant length check. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Acked-by: Tero Aho <Tero.Aho@coriant.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09r8152: redefine REALTEK_USB_DEVICEhayeswang1-6/+20
Redefine REALTEK_USB_DEVICE for the desired USB interface for probe(). There are three USB interfaces for the device. USB_CLASS_COMM and USB_CLASS_CDC_DATA are for ECM mode (config #2). USB_CLASS_VENDOR_SPEC is for the vendor mode (config #1). However, we are not interesting in USB_CLASS_CDC_DATA for probe(), so redefine REALTEK_USB_DEVICE to ignore the USB interface class of USB_CLASS_CDC_DATA. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09net: avoid two atomic operations in fast clonesEric Dumazet2-19/+19
Commit ce1a4ea3f125 ("net: avoid one atomic operation in skb_clone()") took the wrong way to save one atomic operation. It is actually possible to avoid two atomic operations, if we do not change skb->fclone values, and only rely on clone_ref content to signal if the clone is available or not. skb_clone() can simply use the fast clone if clone_ref is 1. kfree_skbmem() can avoid the atomic_dec_and_test() if clone_ref is 1. Note that because we usually free the clone before the original skb, this particular attempt is only done for the original skb to have better branch prediction. SKB_FCLONE_FREE is removed. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Chris Mason <clm@fb.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Cc: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09rtnetlink: delay RTM_DELLINK notification until after ndo_uninit()Mahesh Bandewar3-7/+35
The commit 56bfa7ee7c ("unregister_netdevice : move RTM_DELLINK to until after ndo_uninit") tried to do this ealier but while doing so it created a problem. Unfortunately the delayed rtmsg_ifinfo() also delayed call to fill_info(). So this translated into asking driver to remove private state and then query it's private state. This could have catastropic consequences. This change breaks the rtmsg_ifinfo() into two parts - one takes the precise snapshot of the device by called fill_info() before calling the ndo_uninit() and the second part sends the notification using collected snapshot. It was brought to notice when last link is deleted from an ipvlan device when it has free-ed the port and the subsequent .fill_info() call is trying to get the info from the port. kernel: [ 255.139429] ------------[ cut here ]------------ kernel: [ 255.139439] WARNING: CPU: 12 PID: 11173 at net/core/rtnetlink.c:2238 rtmsg_ifinfo+0x100/0x110() kernel: [ 255.139493] Modules linked in: ipvlan bonding w1_therm ds2482 wire cdc_acm ehci_pci ehci_hcd i2c_dev i2c_i801 i2c_core msr cpuid bnx2x ptp pps_core mdio libcrc32c kernel: [ 255.139513] CPU: 12 PID: 11173 Comm: ip Not tainted 3.18.0-smp-DEV #167 kernel: [ 255.139514] Hardware name: Intel RML,PCH/Ibis_QC_18, BIOS 1.0.10 05/15/2012 kernel: [ 255.139515] 0000000000000009 ffff880851b6b828 ffffffff815d87f4 00000000000000e0 kernel: [ 255.139516] 0000000000000000 ffff880851b6b868 ffffffff8109c29c 0000000000000000 kernel: [ 255.139518] 00000000ffffffa6 00000000000000d0 ffffffff81aaf580 0000000000000011 kernel: [ 255.139520] Call Trace: kernel: [ 255.139527] [<ffffffff815d87f4>] dump_stack+0x46/0x58 kernel: [ 255.139531] [<ffffffff8109c29c>] warn_slowpath_common+0x8c/0xc0 kernel: [ 255.139540] [<ffffffff8109c2ea>] warn_slowpath_null+0x1a/0x20 kernel: [ 255.139544] [<ffffffff8150d570>] rtmsg_ifinfo+0x100/0x110 kernel: [ 255.139547] [<ffffffff814f78b5>] rollback_registered_many+0x1d5/0x2d0 kernel: [ 255.139549] [<ffffffff814f79cf>] unregister_netdevice_many+0x1f/0xb0 kernel: [ 255.139551] [<ffffffff8150acab>] rtnl_dellink+0xbb/0x110 kernel: [ 255.139553] [<ffffffff8150da90>] rtnetlink_rcv_msg+0xa0/0x240 kernel: [ 255.139557] [<ffffffff81329283>] ? rhashtable_lookup_compare+0x43/0x80 kernel: [ 255.139558] [<ffffffff8150d9f0>] ? __rtnl_unlock+0x20/0x20 kernel: [ 255.139562] [<ffffffff8152cb11>] netlink_rcv_skb+0xb1/0xc0 kernel: [ 255.139563] [<ffffffff8150a495>] rtnetlink_rcv+0x25/0x40 kernel: [ 255.139565] [<ffffffff8152c398>] netlink_unicast+0x178/0x230 kernel: [ 255.139567] [<ffffffff8152c75f>] netlink_sendmsg+0x30f/0x420 kernel: [ 255.139571] [<ffffffff814e0b0c>] sock_sendmsg+0x9c/0xd0 kernel: [ 255.139575] [<ffffffff811d1d7f>] ? rw_copy_check_uvector+0x6f/0x130 kernel: [ 255.139577] [<ffffffff814e11c9>] ? copy_msghdr_from_user+0x139/0x1b0 kernel: [ 255.139578] [<ffffffff814e1774>] ___sys_sendmsg+0x304/0x310 kernel: [ 255.139581] [<ffffffff81198723>] ? handle_mm_fault+0xca3/0xde0 kernel: [ 255.139585] [<ffffffff811ebc4c>] ? destroy_inode+0x3c/0x70 kernel: [ 255.139589] [<ffffffff8108e6ec>] ? __do_page_fault+0x20c/0x500 kernel: [ 255.139597] [<ffffffff811e8336>] ? dput+0xb6/0x190 kernel: [ 255.139606] [<ffffffff811f05f6>] ? mntput+0x26/0x40 kernel: [ 255.139611] [<ffffffff811d2b94>] ? __fput+0x174/0x1e0 kernel: [ 255.139613] [<ffffffff814e2129>] __sys_sendmsg+0x49/0x90 kernel: [ 255.139615] [<ffffffff814e2182>] SyS_sendmsg+0x12/0x20 kernel: [ 255.139617] [<ffffffff815df092>] system_call_fastpath+0x12/0x17 kernel: [ 255.139619] ---[ end trace 5e6703e87d984f6b ]--- Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reported-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Cc: Eric Dumazet <edumazet@google.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09tc_act: export uapi header filestephen hemminger1-0/+1
This file is used by iproute2 and should be exported. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09cxgb4: Update firmware version after flashing it via ethtoolHariprasad Shenai1-0/+2
After successfully loading new firmware, reload the new firmware's version number information so "ethtool -i", etc. will report the right value Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09cxgb4/cxgb4vf: Use new interfaces to calculate BAR2 SGE Queue Register addressesHariprasad Shenai7-140/+288
Use BAR2 Going To Sleep (GTS) for T5 and later. Use new BAR2 User Doorbells for T5 for both cxgb4 and cxgb4vf driver. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09cxgb4/cxgb4vf: Add code to calculate T5 BAR2 Offsets for SGE Queue RegistersHariprasad Shenai5-7/+247
Add new Common Code facilities for calculating T5 BAR2 Offsets for SGE Queue Registers. This new code can handle situations where Queues Per Page * SGE BAR2 Queue Register Area Size > Page Size Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09cxgb4vf: Add and initialize some sge params for VF driverHariprasad Shenai4-5/+120
Add sge_vf_eq_qpp and sge_vf_iq_qpp to (struct sge_params), initialize sge_queues_per_page and sge_vf_qpp in t4vf_get_sge_params(), add new t4vf_prep_adapter() which initializes basic adapter parameters. Grab both SGE_EGRESS_QUEUES_PER_PAGE_VF and SGE_INGRESS_QUEUES_PER_PAGE_VF for VF Drivers since we need both to calculate the User Doorbell area offsets for Egress and Ingress Queues. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09tipc: drop tx side permission checksErik Hugne1-37/+1
Part of the old remote management feature is a piece of code that checked permissions on the local system to see if a certain operation was permitted, and if so pass the command to a remote node. This serves no purpose after the removal of remote management with commit 5902385a2440 ("tipc: obsolete the remote management feature") so we remove it. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09rocker: fix eth_type type in struct rocker_ctrlJiri Pirko1-1/+1
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09rocker: introduce be put/get variants and use it when appropriateJiri Pirko1-31/+48
This kills the sparse warnings. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09ipv6: remove useless spin_lock/spin_unlockDuan Jiong1-5/+1
xchg is atomic, so there is no necessary to use spin_lock/spin_unlock to protect it. At last, remove the redundant opt = xchg(&inet6_sk(sk)->opt, opt); statement. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09amd-xgbe: IRQ names require allocated memoryLendacky, Thomas2-4/+5
When requesting an irq, the name passed in must be (part of) allocated memory. The irq name was a local variable and resulted in random characters when listing /proc/interrupts. Add a character field to the xgbe_channel structure to hold the irq name and use that. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-08sunvnet: fix incorrect rcu_read_unlock() in vnet_start_xmit()David L Stevens1-3/+1
This patch removes an extra rcu_read_unlock() on an allocation failure in vnet_skb_shape(). The needed rcu_read_unlock() is already done in the out_dropped label. Reported-by: Rashmi Narasimhan <rashmi.narasimhan@oracle.com> Signed-off-by: David L Stevens <david.stevens@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-08net: phy: bcm7xxx: add an explicit version check for GPHY rev G0Florian Fainelli1-0/+2
GPHY revision G0 has its version rolled over to 0x10, introduce an explicit check for that revision and invoke the proper workaround function for it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-08net: bcmgenet: add support for new GENET PHY revision schemeFlorian Fainelli1-1/+23
Starting with GPHY revision G0, the GENET register layout has changed to use the same numbering scheme as the Starfighter 2 switch. This means that GPHY major revision is in bits 15:12, minor in bits 11:8 and patch level is in bits 7:4. Introduce a small heuristic which checks for the old scheme first, tests for the new scheme and finally attempts to catch reserved values and aborts. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.