aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/mlx4/main.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.hTejun Heo1-0/+1
percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-19sysfs: fix sysfs lockdep warning in mlx4 codeGreg Kroah-Hartman1-0/+1
This fixes a sysfs lockdep warning in the mlx4 code. Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-23Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller1-1/+1
2010-01-07drivers/net/: use DEFINE_PCI_DEVICE_TABLE()Alexey Dobriyan1-1/+1
Use DEFINE_PCI_DEVICE_TABLE() so we get place PCI ids table into correct section in every case. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-06mlx4_core: Fix cleanup in __mlx4_init_one() error pathEli Cohen1-1/+1
If mlx4_init_port_info() fails, cleanup the initialized ports only. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-10-14mlx4_core: Add a new supported 40 GigE device IDEli Cohen1-0/+1
Add MT26438 (ConnectX EN 40GigE PCIe 2.0 5GT/s) to the list of supported devices. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-10-07mlx4_core: Add 40GigE device IDYevgeny Petrilin1-0/+1
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05mlx4_core: Avoid double free_icmsYevgeny Petrilin1-1/+1
On the error path of mlx4_init_hca(), mlx4_close_hca() is called, followed by mlx4_free_icms() and mlx4_UNMAP_FA(). But both those functions are also called from mlx4_close_hca(), which leads to a double free. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05mlx4_core: Allocate and map sufficient ICM memory for EQ contextRoland Dreier1-3/+6
The current implementation allocates a single host page for EQ context memory, which was OK when we only allocated a few EQs. However, since we now allocate an EQ for each CPU core, this patch removes the hard-coded limit (which we exceed with 4 KB pages and 128 byte EQ context entries with 32 CPUs) and uses the same ICM table code as all other context tables, which ends up simplifying the code quite a bit while fixing the problem. This problem was actually hit in practice on a dual-socket Nehalem box with 16 real hardware threads and sufficiently odd ACPI tables that it shows on boot SMP: Allowing 32 CPUs, 16 hotplug CPUs so num_possible_cpus() ends up 32, and mlx4 ends up creating 33 MSI-X interrupts and 33 EQs. This mlx4 bug means that mlx4 can't even initialize at all on this quite mainstream system. Cc: <stable@kernel.org> Reported-by: Eli Cohen <eli@mellanox.co.il> Tested-by: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05mlx4_core: Use pci_request_regions()Roland Dreier1-18/+8
The old code used two calls to pci_request_region() to get the two BARs for the mlx4 device, for no particularly good reason. Clean up the code a little by converting this to a single call to pci_request_regions(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-07-06mlx4_core: Add new ConnectX EN PCI ID 0x6764Yevgeny Petrilin1-0/+1
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-07-06mlx4_core: Handle multi-physical function devicesYevgeny Petrilin1-1/+4
MT26468 (PCI ID 0x6764) devices can expose multiple physical functions. The current driver only handles the primary physical function. For other functions, the QUERY_FW firmware command will fail with the CMD_STAT_MULTI_FUNC_REQ error code. Don't try to drive such devices, but print a message saying the driver is skipping those devices rather than just "QUERY_FW command failed." Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> [ Rather than keeping unsupported devices bound to the driver, simply print a more informative error message and exit - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-05-27mlx4_core: Add module parameter for number of MTTs per segmentEli Cohen1-2/+12
The current MTT allocator uses kmalloc() to allocate a buffer for its buddy allocator, and thus is limited in the amount of MTT segments that it can control. As a result, the size of memory that can be registered is limited too. This patch uses a module parameter to control the number of MTT entries that each segment represents, allowing more memory to be registered with the same number of segments. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-21mlx4_core: Fix memory leak in mlx4_enable_msi_x()Nicolas Morey-Chaisemartin1-1/+1
When the msi_x option is enabled but pci_enable_msix() fails (not enough vectors are available etc), the entries array was not freed on the error path. Signed-off-by: Nicolas Morey-Chaisemartin <nicolas.morey-chaisemartin@ext.bull.net> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang1-2/+2
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)Yang Hongyang1-2/+2
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-18mlx4_core: Add link type autosensingYevgeny Petrilin1-27/+77
When a port's link is down (except to driver restart) and the port is configured for auto sensing, we try to sense port link type (Ethernet or InfiniBand) in order to determine how to initialize the port. If the port type needs to be changed, all mlx4 for the device interfaces are unregistered and then registered again with the new port types. Sensing is done with intervals of 3 seconds. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-02-27mlx4_core: Add device IDs for MT25458 10GigE devicesJack Morgenstein1-0/+2
Add device IDs for Mellanox MT25458 ConnectX+10GBaseT 10GigE adapters. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-09mlx4_core: Fix warning from min()Roland Dreier1-2/+2
Recent cpumask changes changed num_possible_cpus() from returning an int to returning an unsigned int. This means that doing min(num_possible_cpus(), <int expression>) now produces a warning like drivers/net/mlx4/main.c: In function 'mlx4_enable_msi_x': drivers/net/mlx4/main.c:915: warning: comparison of distinct pointer types lacks a cast Fix this by using min_t(int, ...). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-22mlx4_core: Add support for multiple completion event vectorsYevgeny Petrilin1-14/+39
When using MSI-X mode, create a completion event queue for each CPU. Report the number of completion EQs in a new struct mlx4_caps member, num_comp_vectors, and extend the mlx4_cq_alloc() interface with a vector parameter so that consumers can specify which completion EQ should be used to report events for the CQ being created. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-11-28mlx4_core: Save/restore default port IB capability maskJack Morgenstein1-0/+8
Commit 7ff93f8b ("mlx4_core: Multiple port type support") introduced support for different port types. As part of that support, SET_PORT is invoked to set the port type during driver startup. However, as a side-effect, for IB ports the invocation of this command also sets the port's capability mask to zero (losing the default value set by FW). To fix this, get the default ib port capabilities (via a MAD_IFC Port Info query) during driver startup, and save them for use in the mlx4_SET_PORT command when setting the port-type to Infiniband. This patch fixes problems with subnet manager (SM) failover such as <https://bugs.openfabrics.org/show_bug.cgi?id=1183>, which occurred because the IsTrapSupported bit in the capability mask was zeroed. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22mlx4_core: Add Ethernet PCI device IDsYevgeny Petrilin1-0/+2
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22mlx4_core: Multiple port type supportYevgeny Petrilin1-6/+205
Multi-protocol adapters support different port types. Each consumer of mlx4_core queries for supported port types; in particular mlx4_ib can no longer assume that all physical ports belong to it. Port type is configured through a sysfs interface. When the type of a port is changed, all mlx4 interfaces are unregistered, and then registered again with the new port types. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22mlx4_core: Ethernet MAC/VLAN managementYevgeny Petrilin1-0/+14
Add support for managing MAC and VLAN filters for each port. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Oren Duer <oren@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22mlx4_core: Get ethernet MTU and default address from firmwareYevgeny Petrilin1-1/+3
Get maximum ethernet MTU and default MAC address from the firmware QUERY_DEV_CAP command. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-22mlx4_core: Support multiple pre-reserved QP regionsYevgeny Petrilin1-6/+56
For ethernet support, we need to reserve QPs for the ethernet and fibre channel driver. The QPs are reserved at the end of the QP table. (This way we assure that they are aligned to their size) We need to consider these reserved ranges in bitmap creation, so we extend the mlx4 bitmap utility functions to allow reserved ranges at both the bottom and the top of the range. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-25mlx4: Update/add Mellanox Technologies copyright lines to mlx4 driver filesJack Morgenstein1-1/+1
Update existing Mellanox copyright lines to 2008, and add such lines to files where they are missing. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-23IB/mlx4: Add support for memory management extensions and local DMA L_KeyRoland Dreier1-0/+2
Add support for the following operations to mlx4 when device firmware supports them: - Send with invalidate and local invalidate send queue work requests; - Allocate/free fast register MRs; - Allocate/free fast register MR page lists; - Fast register MR send queue work requests; - Local DMA L_Key. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14mlx4_core: Use MOD_STAT_CFG command to get minimal page sizeVladimir Sokolovsky1-0/+7
There was a bug in some versions of the mlx4 driver in mlx4_alloc_fmr(), which hardcoded the minimum acceptable page_shift to be 12. However, new ConnectX firmware can support a minimum page_shift of 9 (log_pg_sz of 9 returned by QUERY_DEV_LIM) -- so with old drivers, ib_fmr_alloc() would fail for ULPs using the device minimum when creating FMRs. To preserve firmware compatibility with released mlx4 drivers, the firmware will continue to return 12 as before for log_page_sz in QUERY_DEV_CAP for these drivers. However, to enable new drivers to take advantage of the available smaller page size, the mlx4 driver now first sets the log_pg_sz to the device minimum by setting a log_page_sz value to 0 via the MOD_STAT_CFG command and then reading the real minimum via QUERY_DEV_CAP. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-23mlx4_core: Move kernel doorbell management into coreYevgeny Petrilin1-0/+3
In addition to mlx4_ib, there will be ethernet and FC consumers of mlx4_core, so move the code for managing kernel doorbells into the core module to avoid having to duplicate this multiple times. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/mlx4: Fix incorrect commentEli Cohen1-2/+1
mlx4 hardware does not support external DDR memory. Moreover, UAR area (BAR 2) can change depending on FW version. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16mlx4_core: Increase max number of QPs to 128KJack Morgenstein1-1/+1
With the advent large clusters which utilize multicore hosts, 64K QPs is not enough. We should increase the default maximum for QPs to 128K. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/mlx4: Add IPoIB LSO supportEli Cohen1-0/+1
Add TSO support to the mlx4_ib driver. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-04IB: Avoid marking __devinitdata as constRoland Dreier1-1/+1
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-04mlx4_core: Don't read reserved fields in mlx4_QUERY_ADAPTER()Jack Morgenstein1-1/+0
The firmware QUERY_ADAPTER command does not return vendor_id, device_id, and revision_id; eliminate these fields from the query. Initialize the rev_id field of the mlx4 device via init_node_data (MAD IFC query), as is done in the query_device verb implementation. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-04mlx4_core: Fix more section mismatchesRoland Dreier1-4/+4
Commit 3d73c288 ("mlx4_core: Fix section mismatches") fixed some of the section mismatches introduced when error recovery was added, but there were still more cases of errory recovery code calling into __devinit code from regular .text. Fix this by getting rid of the now-incorrect __devinit annotations. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-13mlx4_core: Fix infinite loop on device initializationRoland Dreier1-1/+1
Commit 3d73c288 ("mlx4_core: Fix section mismatches") introduced a stupid bug in device init: when some of mlx4_init_one() was split off into __mlx4_init_one(), the call from the main mlx4_init_one() function was back to mlx4_init_one() rather than to __mlx4_init_one(), which leads to an obvious infinite loop if the function is every called. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-10mlx4_core: Fix section mismatchesRoland Dreier1-17/+21
Commit ee49bd93 ("mlx4_core: Reset device when internal error is detected") introduced some section mismatch problems when CONFIG_HOTPLUG=n, because the error recovery code tears down and reinitializes the device after everything is loaded, which ends up calling into lots of code marked __devinit and __devexit from regular .text. Fix this by getting rid of these now-incorrect section markers. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09mlx4_core: Write MTTs from CPU instead with of WRITE_MTT FW commandJack Morgenstein1-0/+11
Write MTT entries directly to ICM from the driver (eliminating use of WRITE_MTT command). This reduces the number of FW commands needed to register an MR by at least a factor of 2 and speeds up memory registration significantly. This code will also be used to implement FMRs. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09mlx4_core: Fix meaning of dev->caps.reserved_mttsRoland Dreier1-1/+2
Everything that uses caps.reserved_mtts expects it to be a count of MTT segments, not MTT entries. So convert the value that the FW gives us to a count of segments. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09mlx4_core: Support ICM tables in coherent memoryJack Morgenstein1-20/+20
Enable having ICM tables in coherent memory, and use coherent memory for the dMPT table. This will allow writing MPT entries for MRs both via the SW2HW_MPT command and also directly by the driver for FMR remapping without needing to flush or worry about cacheline boundaries. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB/mlx4: Display misc device information under /sys/class/infiniband/Jack Morgenstein1-2/+2
display the following device information under /sys/class/infiniband/mlx4_X: board_id, fw_ver, hw_rev, hca_type. This patch makes this information available to userspace utilities such as ibstat and ibv_devinfo. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09mlx4_core: Enable MSI-X by defaultMichael S. Tsirkin1-12/+22
Recover from MSI-X errors by automatically falling back on regular interrupt, instead of asking the user to do this manually. This makes it possible to enable MSI-X by default, and will make it possible to get rid of the msi_x module option in the future. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-17IB/mlx4: Increase max outstanding RDMA reads as targetJack Morgenstein1-1/+1
Change the maximum number of outstanding RDMA reads allowed as a target from 4 to 16 to per QP. This allows RDMA read operations to pipeline better. Pointed out by Dotan Barak and Sagi Rotem. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-17mlx4_core: Reset device when internal error is detectedJack Morgenstein1-11/+13
Reset the device when an internal error is detected. Also, detect errors by polling the error buffer rather than using interrupts. This is more robust and doesn't depend on MSI-X. Remove the old interrupt handler entirely, since we don't want to support two mechanisms for detecting internal errors. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09mlx4_core: Get the maximum message size from reported device capabilitiesDotan Barak1-0/+1
Get the maximum message size from the device capabilities returned from the QUERY_DEV_CAP firmware command, rather than hard-coding 2 GB. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-02mlx4_core: Add new Mellanox device IDsJack Morgenstein1-0/+2
Add new IDs for PCIe gen2 devices. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-18IB/mlx4: Handle FW command interface rev 3Roland Dreier1-5/+9
Upcoming firmware introduces command interface revision 3, which changes the way port capabilities are queried and set. Update the driver to handle both the new and old command interfaces by adding a new MLX4_FLAG_OLD_PORT_CMDS that it is set after querying the firmware interface revision and then using the correct interface based on the setting of the flag. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-07mlx4_core: Initialize ctx_list and ctx_lock earlierRoland Dreier1-0/+2
We may call mlx4_dispatch_event() before mlx4_register_device() is called for a device, because for example a catastrophic error happens immediately after we enable interrupts. Therefore priv->ctx_list and priv->ctx_lock need to be initialized earlier. This bug was actually exposed by the MSI-X bug that returned IRQ numbers to drivers in reverse order, so that the first FW command interrupt looked to mlx4 like a catastrophic error. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-13mlx4_core: Remove unused doorbell_lockRoland Dreier1-2/+0
struct mlx4_priv.doorbell_lock is never used, so delete it. Signed-off-by: Roland Dreier <rolandd@cisco.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.