aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/netxen/netxen_nic_ctx.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2011-06-21drivers/net: Remove casts of void *Joe Perches1-8/+8
Unnecessary casts of void * clutter the code. These are the remainder casts after several specific patches to remove netdev_priv and dev_priv. Done via coccinelle script (and a little editing): $ cat cast_void_pointer.cocci @@ type T; T *pt; void *pv; @@ - pt = (T *)pv; + pt = pv; Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Acked-By: Chris Snook <chris.snook@gmail.com> Acked-by: Jon Mason <jdmason@kudzu.us> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: David Dillow <dave@thedillows.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-15netxen: support for GbE port settingsSony Chacko1-0/+15
o Enable setting speed and auto negotiation parameters for GbE ports. o Hardware do not support half duplex setting currently. David Miller: Amit please update your patch to silently reject link setting attempts that are unsupported by the device. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-28netxen: fix kdumpRajesh Borundia1-15/+0
Reset the whole hw instead of freeing hw resources consumed by each pci function. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-14netxen: fix for kdumpRajesh Borundia1-1/+15
When the crash kernel is loaded after crash, the device is in unknown state. So reset the device contexts prior to its creation in case of kdump, depending upon kernel parameter reset_devices. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15netxen: fix memory leaks in error pathAmit Kumar Salecha1-1/+2
Fixes memory leak in error path when memory allocation for adapter data structures fails. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-26netxen: fix warning in ioaddr for NX3031 chipAmit Kumar Salecha1-6/+8
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> crb_intr_mask/crb_sts_consumer is predefined for NX2031 not for NX3031. For NX3031, these values get defined in rx context creation. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-15netxen: fix license headerAmit Kumar Salecha1-1/+1
GNU General Public License is in file "COPYING". Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11netxen: update copyrightDhananjay Phadke1-6/+1
o Add QLogic copyright, add linux-driver@qlogic.com to MAINTAINERS. o Delete old contact information. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-07netxen: pre calculate register addressesAmit Kumar Salecha1-7/+14
For registers accessed in fast path (interrupt / softirq) avoid expensive I/O address translation. These registers are directly mapped in PCI bar 0 and do not require any window checks. Signed-off-by: Amit Kumar Salecha <amit@netxen.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-07netxen: firmware hang detectionDhananjay Phadke1-0/+8
Implement state machine to detect firmware hung state and recover. Since firmware will be shared by all PCI functions that have different class drivers (NIC or FCOE or iSCSI), explicit hardware based serialization is required for initializing firmware. o Used global scratchpad register to maintain device reference count. Every probed pci function adds to ref count. o Implement timer (delayed work) for each pci func that checks firmware heartbit every 5 sec and detaches itself if firmware is dead. Last detaching function reloads firmware. Other functions wait for firmware init, and re-attach themselves. Heartbit is not supported by NX2031 firmware. Signed-off-by: Amit Kumar Salecha <amit@netxen.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-26netxen: remove netxen_nic_niu.cDhananjay Phadke1-0/+38
Consolidate all MAC/PHY access functions into netxen_nic_hw.c Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-26netxen: implement generic pcie semaphore functionsDhananjay Phadke1-35/+0
Implement common function for locking/unlocking 8 hardware semaphores used for serializing access to shared resouces on a NIC board by different PCI functions. As by definition, callers of these semaphore API can be put to sleep till the semaphore is locked. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-23netxen: remove netxen_nic_phan_reg.hDhananjay Phadke1-1/+0
Consolidate register definitions in netxen_nic_hdr.h Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-23netxen: ethtool statistics and control for LRONarender Kumar1-2/+0
Add ethtool -K knob to control LRO in firmware. LRO path is completely separated from GRO, LRO packets are still fed with netif_receive_skb(). Also fix ethtool statistics to include LRO packets. Also use correct message type while configuring interrupt coalescing. Signed-off-by: Narender Kumar <narender.kumar@qlogic.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05netxen: add hardware LRO supportDhananjay Phadke1-0/+2
Add support to handle aggregate packets from firmware. Local TCP flows are automatically identified by firmware based on the dest IP hash added by driver for local IP addresses. The packets are sent down on the jumbo rx ring. Signed-off-by: Narender Kumar <narender.kumar@qlogic.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27netxen: clean up firmware version checksDhananjay Phadke1-3/+3
NX2031 firmware version will never be > 4.0.0, so replace (adapter->fw_major < 4) checks with pci revision ID check. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-20netxen: fix context deletion sequenceDhananjay Phadke1-6/+7
o Use D3 reset context deletion for NX2031, it cleans up more resources in the firmware. o Release rx buffers after hardware context has been reset. o Delete tx context after rx context, some firmware control commands are sent on tx context, so it should be the last to go. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-28netxen: refactor netxen_recv_context structDhananjay Phadke1-22/+27
o move related fields into netxen_recv_context struct. o allocate rx buffer and descriptor rings dynamically. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-08netxen: enable rss for NX2031Dhananjay Phadke1-32/+95
Enable multiple rx rings for older NX2031 chip, firmware 3.4.336 or newer supports this feature. Signed-off-by: Amit Kumar Salecha <amit@netxen.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-08netxen: sanitize function namesDhananjay Phadke1-16/+13
Replace superfluous wrapper functions with two macros: NXWR32 replaces netxen_nic_reg_write, netxen_nic_write_w0, netxen_nic_read_w1, netxen_crb_writelit_adapter. NXRD32 replaces netxen_nic_reg_read, netxen_nic_read_w0, netxen_nic_read_w1. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-08netxen: annotate register access functionsDhananjay Phadke1-10/+8
o remove unnecessary length parameter since register access width is fixed 4 byte. o remove superfluous pci_read_normalize and pci_write_normalize functions. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-08netxen: refactor transmit codeDhananjay Phadke1-30/+19
o move tx stuff into nx_host_tx_ring structure, this will help managing multiple tx rings in future. o sanitize some variable names Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-08netxen: refactor netxen_adapterDhananjay Phadke1-7/+0
Rearrange members to align them at right offset. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14netxen: add receive side scaling (rss) supportDhananjay Phadke1-49/+68
This patch enables the load balancing capability of firmware and hardware to spray traffic into different cpus through separate rx msix interrupts. The feature is being enabled for NX3031, NX2031 (old) will be enabled later. This depends on msi-x and compatibility with msi and legacy is maintained by enabling single rx ring. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14netxen: sanitize variable namesDhananjay Phadke1-8/+8
o remove max_ prefix from ring sizes, since they don't really represent max possible sizes. o cleanup naming of rx ring types (normal, jumbo, lro). o simplify logic to choose rx ring size, gig ports get half rx ring of 10 gig ports. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10netxen: cleanup superfluous multi-context codeDhananjay Phadke1-68/+62
MAX_RCV_CTX was set to 1, there's only rx context per PCI function. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27netxen: update copyrightDhananjay Phadke1-4/+4
Extend copyright into 2009 and update address. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14netxen: fix endianness in firmware commandsDhananjay Phadke1-29/+21
o Set restricted (little endian) data types in firmware command requests and responses. o Remove unnecessary conversion to LE when writing registers. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-07netxen: fix promisc mode, mtu settingDhananjay Phadke1-3/+6
For NX3031, multicast filtering, promisc mode, and max frame size setting is handled by firmware, driver needs to send request to enable/disable it. For old chip revisions / firmware, driver still sets it directly. Added function pointer to set mtu according to chip revision. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22netxen: cut-through rx changesDhananjay Phadke1-0/+710
NX3031 supports cut-through operation where ingress packets are directly dma'ed into host buffers to reduce latency. This requires larger dma buffers (2kb) and different alignemnt. The buffer posting logic is changed a bit. The free rx buffers are maintained in linked list, since the received reference handles can be out of order. However rx descriptors are still posted sequentially, indexed by producer. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.