aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/phy/fixed_phy.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-05-04net: phy: improve pause handlingHeiner Kallweit1-1/+1
When probing the phy device we set sym and asym pause in the "supported" bitmap (unless the PHY tells us otherwise). However we don't know yet whether the MAC supports pause. Simply copying phy->supported to phy->advertising will trigger advertising pause, and that's not what we want. Therefore add phy_advertise_supported() that copies all modes but doesn't touch the pause bits. In phy_support_(a)sym_pause we shouldn't set any bits in the supported bitmap because we may set a bit the PHY intentionally disabled. Effective pause support should be the AND-combined PHY and MAC pause capabilities. If the MAC supports everything, then it's only relevant what the PHY supports. If MAC supports sym pause only, then we have to clear the asym bit in phydev->supported. Copy the pause flags only and don't touch the modes, because a driver may have intentionally removed a mode from phydev->advertising. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24net: phy: fix reading fixed phy statusHeiner Kallweit1-0/+3
With the switch to phy_resolve_aneg_linkmode() we don't read from the chip any longer what is advertised but use phydev->advertising directly. For a fixed phy however this bitmap is empty so far, what results in no common mode being found. This breaks DSA. Fix this by advertising everything that is supported. For a normal phy this done by phy_probe(). Fixes: 5502b218e001 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-07net: fixed-phy: Add fixed_phy_register_with_gpiod() APIMoritz Fischer1-7/+25
Add fixed_phy_register_with_gpiod() API. It lets users create a fixed_phy instance that uses a GPIO descriptor which was obtained externally e.g. through platform data. This enables platform devices (non-DT based) to use GPIOs for link status. Signed-off-by: Moritz Fischer <mdf@kernel.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-07net: phy: fixed_phy: Fix fixed_phy not checking GPIOMoritz Fischer1-3/+3
Fix fixed_phy not checking GPIO if no link_update callback is registered. In the original version all users registered a link_update callback so the issue was masked. Fixes: a5597008dbc2 ("phy: fixed_phy: Add gpio to determine link up/down.") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04net: phy: fixed-phy: Drop GPIO from fixed_phy_add()Linus Walleij1-22/+60
All users of the fixed_phy_add() pass -1 as GPIO number to the fixed phy driver, and all users of fixed_phy_register() pass -1 as GPIO number as well, except for the device tree MDIO bus. Any new users should create a proper device and pass the GPIO as a descriptor associated with the device so delete the GPIO argument from the calls and drop the code looking requesting a GPIO in fixed_phy_add(). In fixed phy_register(), investigate the "fixed-link" node and pick the GPIO descriptor from "link-gpios" if this property exists. Move the corresponding code out of of_mdio.c as the fixed phy code anyways requires OF to be in use. Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: phy: Convert some PHY and MDIO driver files to SPDX headersAndrew Lunn1-5/+1
Where the license text and the MODULE_LICENSE() value agree, convert to using an SPDX header, removing the license text. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-17Fixed PHY: Add fixed_phy_change_carrier()Joakim Tjernlund1-1/+23
Drivers can use this as .ndo_change_carrier() to change carrier via /sys/class/net/ethX/carrier. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11net: ethernet: Convert phydev advertize and supported from u32 to link modeAndrew Lunn1-5/+14
There are a few MAC/PHYs combinations which now support > 1Gbps. These may need to make use of link modes with bits > 31. Thus their supported PHY features or advertised features cannot be implemented using the current bitmap in a u32. Convert to using a linkmode bitmap, which can support all the currently devices link modes, and is future proof as more modes are added. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-24net: phy: fixed-phy: Make the error path simplerFabio Estevam1-5/+2
When platform_device_register_simple() fails we can return the error immediately instead of jumping to the 'err_pdev' label. This makes the error path a bit simpler. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03net: phy: fixed-phy: remove fixed_phy_update_state()Russell King1-31/+0
mvneta is the only user of fixed_phy_update_state(), which has been converted to use phylink instead. Remove fixed_phy_update_state(). Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-17net: phy: fixed_phy: fix of_node leak in fixed_phy_unregisterJohan Hovold1-1/+1
Make sure to drop the of_node reference taken in fixed_phy_register() when deregistering a PHY. Fixes: a75951217472 ("net: phy: extend fixed driver with fixed_phy_register()") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-11/+11
Several cases of overlapping changes, except the packet scheduler conflicts which deal with the addition of the free list parameter to qdisc_enqueue(). Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net: phy: Manage fixed PHY address space using IDAFlorian Fainelli1-11/+11
If we have a system which uses fixed PHY devices and calls fixed_phy_register() then fixed_phy_unregister() we can exhaust the number of fixed PHYs available after a while, since we keep incrementing the variable phy_fixed_addr, but we never decrement it. This patch fixes that by converting the fixed PHY allocation to using IDA, which takes care of the allocation/dealloaction of the PHY addresses for us. Fixes: a75951217472 ("net: phy: extend fixed driver with fixed_phy_register()") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-27phy: improve safety of fixed-phy MII register readingRussell King1-7/+21
There is no prevention of a concurrent call to both fixed_mdio_read() and fixed_phy_update_state(), which can result in the state being modified while it's being inspected. Fix this by using a seqcount to detect modifications, and memcpy()ing the state. We remain slightly naughty here, calling link_update() and updating the link status within the read-side loop - which would need rework of the design to change. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-27phy: generate swphy registers on the flyRussell King1-26/+5
Generate software phy registers as and when requested, rather than duplicating the state in fixed_phy. This allows us to eliminate the duplicate storage of of the same data, which is only different in format. As fixed_phy_update_regs() no longer updates register state, rename it to fixed_phy_update(). Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-27phy: separate swphy state validation from register generationRussell King1-8/+7
Separate out the generation of MII registers from the state validation. This allows us to simplify the error handing in fixed_phy() by allowing earlier error detection. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-27phy: move fixed_phy MII register generation to a libraryRussell King1-92/+3
Move the fixed_phy MII register generation to a library to allow other software phy implementations to use this code. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20phy: fix crash in fixed_phy_add()Rabin Vincent1-1/+5
Since e7f4dc3536a ("mdio: Move allocation of interrupts into core"), platforms which call fixed_phy_add() before fixed_mdio_bus_init() is called (for example, because the platform code and the fixed_phy driver use the same initcall level) crash in fixed_phy_add() since the ->mii_bus is not allocated. Also since e7f4dc3536a, these interrupts are initalized to polling by default. The few (old) platforms which directly use fixed_phy_add() from their platform code all pass PHY_POLL for the irq argument, so we can keep these platforms not crashing by simply not attempting to set the irq if PHY_POLL is passed. Also, even if problems have not been reported on more modern platforms which used fixed_phy_register() from drivers' probe functions, we return -EPROBE_DEFER if the MDIO bus is not yet registered so that the probe is retried later. Fixes: e7f4dc3536a400 ("mdio: Move allocation of interrupts into core") Signed-off-by: Rabin Vincent <rabinv@axis.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26fixed_phy: get_phy_device() doesn't return NULL anymoreSergei Shtylyov1-1/+1
Now that get_phy_device() no longer returns NULL on error, we don't need to check for it... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14phy: fixed: Fix removal of phys.Andrew Lunn1-2/+9
The fixed phys delete function simply removed the fixed phy from the internal linked list and freed the memory. It however did not unregister the associated phy device. This meant it was still possible to find the phy device on the mdio bus. Make fixed_phy_del() an internal function and add a fixed_phy_unregister() to unregisters the phy device and then uses fixed_phy_del() to free resources. Modify DSA to use this new API function, so we don't leak phys. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add an mdio_device structureAndrew Lunn1-5/+5
Not all devices attached to an MDIO bus are phys. So add an mdio_device structure to represent the generic parts of an mdio device, and place this structure into the phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio: Move allocation of interrupts into coreAndrew Lunn1-3/+1
Have mdio_alloc() create the array of interrupt numbers, and initialize it to POLLING. This is what most MDIO drivers want, so allowing code to be removed from the drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24phy: fixed-phy: properly validate phy in fixed_phy_update_state()Russell King1-1/+1
Validate that the phy_device passed into fixed_phy_update_state() is a fixed-phy device before walking the list of phys for a fixed phy at the same address. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-06fixed_phy: pass 'irq' to fixed_phy_add()Sergei Shtylyov1-1/+1
I've noticed that fixed_phy_register() ignores its 'irq' parameter instead of passing it to fixed_phy_add(). Luckily, fixed_phy_register() seems to always be called with PHY_POLL for 'irq'... :-) Fixes: a75951217472 ("net: phy: extend fixed driver with fixed_phy_register()") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31net: phy: fixed_phy: Set phy capabilities even when link down.Andrew Lunn1-25/+48
What features a phy supports is masked in genphy_config_init() by looking at the PHYs BMSR register. If the link is down, fixed_phy_update_regs() will only set the auto- negotiation capable bit in BMSR. Thus genphy_config_init() comes to the conclusion the PHY can only perform 10/Half, and masks out the higher speed features. If however the link it up, BMSR is set to indicate the speed the PHY is capable of auto-negotiating, and genphy_config_init() does not mask out the high speed features. To fix this, when the link is down, have fixed_phy_update_regs() leave the link status, auto-negotiation complete, and link partner capabilities unset, but set all the local capabilities depending on the fixed phy speed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31phy: fixed_phy: Add gpio to determine link up/down.Andrew Lunn1-3/+23
An SFP module may have a link up/down status pin which can be connection to a GPIO line of the host. Add support for reading such an GPIO in the fixed_phy driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31phy: fixed_phy: Set supported speed in phydevAndrew Lunn1-0/+12
Set the supported field of the phydev to indicate the speed features of the phy. If the phy is never attached to a netdev, but used in an adjust_link() function, the speed will be incorrectly evaluated to 10/half rather than the correct speed/duplex. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31net: phy: Allow PHY devices to identify themselves as Ethernet switches, etc.Florian Fainelli1-0/+1
Some Ethernet MAC drivers using the PHY library require the hardcoding of link parameters when interfaced to a switch device, SFP module, switch to switch port, etc. This has typically lead to various ad-hoc implementations looking like this: - using a "fixed PHY" emulated device, which will provide link indication towards the Ethernet MAC driver and hardware - pretend there is no PHY and hardcode link parameters, ala mv643x_eth Based on that, it is desireable to have the PHY drivers advertise the correct link parameters, just like regular Ethernet PHYs towards their CPU Ethernet MAC drivers, however, Ethernet MAC drivers should be able to tell whether this link should be monitored or not. In the context of an Ethernet switch, SFP module, switch to switch link, we do not need to monitor this link since it should be always up. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+9
2015-08-27net: phy: fixed: propagate fixed link values to structMadalin Bucur1-0/+9
The fixed link values parsed from the device tree are stored in the struct fixed_phy member status. The struct phy_device members speed, duplex were not updated. Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21net: phy: fixed_phy: handle link-down caseStas Sergeev1-3/+5
fixed_phy_register() currently hardcodes the fixed PHY link to 1, and expects to find a "speed" parameter to provide correct information towards the fixed PHY consumer. In a subsequent change, where we allow "managed" (e.g: (RS)GMII in-band status auto-negotiation) fixed PHYs, none of these parameters can be provided since they will be auto-negotiated, hence, we just provide a zero-initialized fixed_phy_status to fixed_phy_register() which makes it fail when we call fixed_phy_update_regs() since status.speed = 0 which makes us hit the "default" label and error out. Without this change, we would also see potentially inconsistent speed/duplex parameters for fixed PHYs when the link is DOWN. CC: netdev@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net> [florian: add more background to why this is correct and desirable] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-03add fixed_phy_update_state() - update state of fixed_phyStas Sergeev1-0/+29
Currently fixed_phy uses a callback to periodically poll the link state. This patch adds the fixed_phy_update_state() API. It solves the following problems: - On link state interrupt, MAC driver can't update status. Instead it needs to provide the callback to periodically query the HW about the link state. It is more efficient to update status after interrupt. - The callback needs to be unregistered before phy_disconnect(), or otherwise it will be called with net_dev==NULL. phy_disconnect() does not have enough info to unregister the callback automatically. - The callback needs to be registered before of_phy_connect() to avoid running with outdated state, but of_phy_connect() returns the phy_device pointer, which is needed to register the callback. Registering it before of_phy_connect() will therefore require a hack to get the pointer earlier. Overall, this addition makes the subsequent patch that implements SGMII link status for mvneta, much cleaner. CC: Florian Fainelli <f.fainelli@gmail.com> CC: netdev@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25net: phy: fixed: allow setting no update_link callbackFlorian Fainelli1-1/+1
fixed_phy_set_link_update() contains an early check against a NULL callback pointer, which basically prevents us from removing any previous callback we may have set. The users of the fp->link_update callback deal with a NULL callback just fine, so we really want to allow "removing" a link_update callback to avoid dangling callback pointers during e.g: module removal. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-16net: Allow FIXED_PHY to be modular.David S. Miller1-0/+337
Otherwise we get things like: warning: (NET_DSA_BCM_SF2 && BCMGENET && SYSTEMPORT) selects FIXED_PHY which has unmet direct dependencies (NETDEVICES && PHYLIB=y) In order to make this work we have to rename fixed.c to fixed_phy.c because the regulator drivers already have a module named "fixed.o". Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.