aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/phy/phy_device.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-10-16net: phy: Fix "link partner" information disappear issueYonglong Liu1-1/+10
Some drivers just call phy_ethtool_ksettings_set() to set the links, for those phy drivers that use genphy_read_status(), if autoneg is on, and the link is up, than execute "ethtool -s ethx autoneg on" will cause "link partner" information disappear. The call trace is phy_ethtool_ksettings_set()->phy_start_aneg() ->linkmode_zero(phydev->lp_advertising)->genphy_read_status(), the link didn't change, so genphy_read_status() just return, and phydev->lp_advertising is zero now. This patch moves the clear operation of lp_advertising from phy_start_aneg() to genphy_read_lpa()/genphy_c45_read_lpa(), and if autoneg on and autoneg not complete, just clear what the generic functions care about. Fixes: 88d6272acaaa ("net: phy: avoid unneeded MDIO reads in genphy_read_status") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: phy: extract link partner advertisement readingRussell King1-25/+40
Move reading the link partner advertisement out of genphy_read_status() into its own separate function. This will allow re-use of this code by PHY drivers that are able to read the resolved status from the PHY. Tested-by: tinywrkb <tinywrkb@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+11
Merge conflict of mlx5 resolved using instructions in merge commit 9566e650bf7fdf58384bb06df634f7531ca3a97e. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17net: phy: remove genphy_config_initHeiner Kallweit1-51/+0
Now that all users have been removed we can remove genphy_config_init. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15net: phy: read MII_CTRL1000 in genphy_read_status only if neededHeiner Kallweit1-5/+6
Value of MII_CTRL1000 is needed only if LPA_1000MSFAIL is set. Therefore move reading this register. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-13net: phy: consider AN_RESTART status when reading link statusHeiner Kallweit1-1/+11
After configuring and restarting aneg we immediately try to read the link status. On some systems the PHY may not yet have cleared the "aneg complete" and "link up" bits, resulting in a false link-up signal. See [0] for a report. Clause 22 and 45 both require the PHY to keep the AN_RESTART bit set until the PHY actually starts auto-negotiation. Let's consider this in the generic functions for reading link status. The commit marked as fixed is the first one where the patch applies cleanly. [0] https://marc.info/?t=156518400300003&r=1&w=2 Fixes: c1164bb1a631 ("net: phy: check PMAPMD link status only in genphy_c45_read_link") Tested-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-08-11net: phy: prepare phylib to deal with PHY's extending Clause 22Heiner Kallweit1-15/+12
The integrated PHY in 2.5Gbps chip RTL8125 is the first (known to me) PHY that uses standard Clause 22 for all modes up to 1Gbps and adds 2.5Gbps control using vendor-specific registers. To use phylib for the standard part little extensions are needed: - Move most of genphy_config_aneg to a new function __genphy_config_aneg that takes a parameter whether restarting auto-negotiation is needed (depending on whether content of vendor-specific advertisement register changed). - Don't clear phydev->lp_advertising in genphy_read_status so that we can set non-C22 mode flags before. Basically both changes mimic the behavior of the equivalent Clause 45 functions. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-11net: phy: simplify genphy_config_advert by using the linkmode_adv_to_xxx_t functionsHeiner Kallweit1-16/+6
Using linkmode_adv_to_mii_adv_t and linkmode_adv_to_mii_ctrl1000_t allows to simplify the code. In addition avoiding the conversion to the legacy u32 advertisement format allows to remove the warning. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-02net: phy: fix race in genphy_update_linkHeiner Kallweit1-0/+6
In phy_start_aneg() autoneg is started, and immediately after that link and autoneg status are read. As reported in [0] it can happen that at time of this read the PHY has reset the "aneg complete" bit but not yet the "link up" bit, what can result in a false link-up detection. To fix this don't report link as up if we're in aneg mode and PHY doesn't signal "aneg complete". [0] https://marc.info/?t=156413509900003&r=1&w=2 Fixes: 4950c2ba49cc ("net: phy: fix autoneg mismatch case in genphy_read_status") Reported-by: liuyonglong <liuyonglong@huawei.com> Tested-by: liuyonglong <liuyonglong@huawei.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-12net: phy: make exported variables non-staticDenis Efremov1-3/+3
The variables phy_basic_ports_array, phy_fibre_port_array and phy_all_ports_features_array are declared static and marked EXPORT_SYMBOL_GPL(), which is at best an odd combination. Because the variables were decided to be a part of API, this commit removes the static attributes and adds the declarations to the header. Fixes: 3c1bcc8614db ("net: ethernet: Convert phydev advertize and supported from u32 to link mode") Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14net: phy: Add more 1000BaseX support detectionRobert Hancock1-0/+2
Commit "net: phy: Add detection of 1000BaseX link mode support" added support for not filtering out 1000BaseX mode from the PHY's supported modes in genphy_config_init, but we have to make a similar change in genphy_read_abilities in order to actually detect it as a supported mode in the first place. Add this in. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-06net: phy: Add detection of 1000BaseX link mode supportRobert Hancock1-0/+3
Add 1000BaseX to the link modes which are detected based on the MII_ESTATUS register as per 802.3 Clause 22. This allows PHYs which support 1000BaseX to work properly with drivers using phylink. Previously 1000BaseX support was not detected, and if that was the only mode the PHY indicated support for, phylink would refuse to attach it due to the list of supported modes being empty. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30net: phy: enable interrupts when PHY is attached alreadyHeiner Kallweit1-1/+1
This patch is a step towards allowing PHY drivers to handle more interrupt sources than just link change. E.g. several PHY's have built-in temperature monitoring and can raise an interrupt if a temperature threshold is exceeded. We may be interested in such interrupts also if the phylib state machine isn't started. Therefore move enabling interrupts to phy_request_interrupt(). v2: - patch added to series Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29net: phy: Add phy_standalone sysfs entryIoana Ciornei1-0/+22
Export a phy_standalone device attribute that is meant to give the indication that this PHY lacks an attached_dev and its corresponding sysfs link. The attribute will be created only when the phy_attach_direct() function will be called with a NULL net_device. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29net: phy: Check against net_device being NULLIoana Ciornei1-0/+6
In general, we don't want MAC drivers calling phy_attach_direct with the net_device being NULL. Add checks against this in all the functions calling it: phy_attach() and phy_connect_direct(). Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29net: phy: Guard against the presence of a netdevIoana Ciornei1-10/+23
A prerequisite for PHYLIB to work in the absence of a struct net_device is to not access pointers to it. Changes are needed in the following areas: - Printing: In some places netdev_err was replaced with phydev_err. - Incrementing reference count to the parent MDIO bus driver: If there is no net device, then the reference count should definitely be incremented since there is no chance that it was an Ethernet driver who registered the MDIO bus. - Sysfs links are not created in case there is no attached_dev. - No netif_carrier_off is done if there is no attached_dev. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29net: phy: Add phy_sysfs_create_links helper functionVladimir Oltean1-17/+26
This is a cosmetic patch that wraps the operation of creating sysfs links between the netdev->phydev and the phydev->attached_dev. This is needed to keep the indentation level in check in a follow-up patch where this function will be guarded against the existence of a phydev->attached_dev. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22net: phy: Make phy_basic_t1_features use base100t1.Andrew Lunn1-1/+1
Now that there is a link mode for 100BaseT1, use it in phy_basic_t1_features so T1 PHY drivers will indicate this mode via the Ethtool API. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+7
Minor conflict with the DSA legacy code removal. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net: phy: fix phy_validate_pauseHeiner Kallweit1-4/+7
We have valid scenarios where ETHTOOL_LINK_MODE_Pause_BIT doesn't need to be supported. Therefore extend the first check to check for rx_pause being set. See also phy_set_asym_pause: rx=0 and tx=1: advertise asym pause only rx=0 and tx=0: stop advertising both pause modes The fixed commit isn't wrong, it's just the one that introduced the linkmode bitmaps. Fixes: 3c1bcc8614db ("net: ethernet: Convert phydev advertize and supported from u32 to link mode") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: phy: improve pause handlingHeiner Kallweit1-7/+29
When probing the phy device we set sym and asym pause in the "supported" bitmap (unless the PHY tells us otherwise). However we don't know yet whether the MAC supports pause. Simply copying phy->supported to phy->advertising will trigger advertising pause, and that's not what we want. Therefore add phy_advertise_supported() that copies all modes but doesn't touch the pause bits. In phy_support_(a)sym_pause we shouldn't set any bits in the supported bitmap because we may set a bit the PHY intentionally disabled. Effective pause support should be the AND-combined PHY and MAC pause capabilities. If the MAC supports everything, then it's only relevant what the PHY supports. If MAC supports sym pause only, then we have to clear the asym bit in phydev->supported. Copy the pause flags only and don't touch the modes, because a driver may have intentionally removed a mode from phydev->advertising. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28net: phy: avoid unneeded MDIO reads in genphy_read_statusHeiner Kallweit1-1/+5
Considering that in polling mode each link drop will be latched, settings can't have changed if link was up and is up. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26net: phy: improve genphy_soft_resetHeiner Kallweit1-2/+14
PHY's behave differently when being reset. Some reset registers to defaults, some don't. Some trigger an autoneg restart, some don't. So let's also set the autoneg restart bit when resetting. Then PHY behavior should be more consistent. Clearing BMCR_ISOLATE serves the same purpose and is borrowed from genphy_restart_aneg. BMCR holds the speed / duplex settings in fixed mode. Therefore we may have an issue if a soft reset resets BMCR to its default. So better call genphy_setup_forced() afterwards in fixed mode. We've seen no related complaint in the last >10 yrs, so let's treat it as an improvement. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18net: phy: don't set autoneg if it's not supportedHeiner Kallweit1-0/+4
In phy_device_create() we set phydev->autoneg = 1. This isn't changed even if the PHY doesn't support autoneg. This seems to affect very few PHY's, and they disable phydev->autoneg in their config_init callback. So it's more of an improvement, therefore net-next. The patch also wouldn't apply to older kernel versions because the link mode bitmaps have been introduced recently. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08net: phy: fix setting autoneg_complete in genphy_update_linkHeiner Kallweit1-6/+4
The original patch didn't set phydev->autoneg_complete in one exit path. Fix this. Fixes: 4950c2ba49cc ("net: phy: fix autoneg mismatch case in genphy_read_status") Reported-by: Simon Horman <horms@verge.net.au> Tested-by: Simon Horman <horms@verge.net.au> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08net: phy: replace genphy_10g_driver with genphy_c45_driverHeiner Kallweit1-8/+8
Recently a number of generic functions for Clause 45 PHY's has been added. So let's replace the old very limited genphy_10g_driver with a genphy_c45_driver. This driver isn't limited to 10G, however it's worth to be noted that Clause 45 doesn't cover 1000Base-T. For using 1000Base-T with a Clause 45 PHY a dedicated PHY driver using vendor registers is needed. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08net: phy: improve link partner capability detectionHeiner Kallweit1-4/+8
genphy_read_status() so far checks phydev->supported, not the actual PHY capabilities. This can make a difference if the supported speeds have been limited by of_set_phy_supported() or phy_set_max_speed(). It seems that this issue only affects the link partner advertisements as displayed by ethtool. Also this patch wouldn't apply to older kernels because linkmode bitmaps have been introduced recently. Therefore net-next. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04net: phy: allow a PHY driver to define neither features nor get_featuresHeiner Kallweit1-7/+12
Meanwhile we have generic functions for reading the abilities of Clause 22 / 45 PHY's. This allows to use them as fallback in case callback get_features isn't set. Benefit is the reduction of boilerplate code in PHY drivers. v2: - adjust the comment in phy_driver_register to match the code Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-03net: phy: fix autoneg mismatch case in genphy_read_statusHeiner Kallweit1-5/+3
The original patch didn't consider the case that autoneg process finishes successfully but both link partners have no mode in common. In this case there's no link, nevertheless we may be interested in what the link partner advertised. Like phydev->link we set phydev->autoneg_complete in genphy_update_link() and use the stored value in genphy_read_status(). This way we don't have to read register BMSR again. Fixes: b6163f194c69 ("net: phy: improve genphy_read_status") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-02net: phy: use genphy_read_abilities in genphy driverHeiner Kallweit1-2/+1
Currently the genphy driver populates phydev->supported like this: First all possible feature bits are set, then genphy_config_init() reads the available features from the chip and remove all unsupported features from phydev->supported. This can be simplified by using genphy_read_abilities(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-02net: phy: add genphy_read_abilitiesHeiner Kallweit1-0/+48
Similar to genphy_c45_pma_read_abilities() add a function to dynamically detect the abilities of a Clause 22 PHY. This is mainly copied from genphy_config_init(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01net: phy: improve genphy_read_statusHeiner Kallweit1-15/+8
This patch improves few aspects of genphy_read_status(): - Don't initialize lpagb, it's not needed. - Move initializing phydev->speed et al before the if clause. - In auto-neg case, skip populating lp_advertising if we don't have a link. This avoids quite some unnecessary MDIO reads in case of phylib polling mode. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-25net: phy: don't clear BMCR in genphy_soft_resetHeiner Kallweit1-1/+1
So far we effectively clear the BMCR register. Some PHY's can deal with this (e.g. because they reset BMCR to a default as part of a soft-reset) whilst on others this causes issues because e.g. the autoneg bit is cleared. Marvell is an example, see also thread [0]. So let's be a little bit more gentle and leave all bits we're not interested in as-is. This change is needed for PHY drivers to properly deal with the original patch. [0] https://marc.info/?t=155264050700001&r=1&w=2 Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") Tested-by: Phil Reid <preid@electromag.com.au> Tested-by: liweihang <liweihang@hisilicon.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: phy: export genphy_config_eee_advertHeiner Kallweit1-1/+2
We want to use this function in phy-c45.c too, therefore export it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: phy: don't use 10BaseT/half as default in genphy_read_statusHeiner Kallweit1-2/+2
If link partner and we can't agree on any mode, then it doesn't make sense to pretend we would have agreed on 10/half. Therefore set a proper default. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: phy: remove orphaned register read in genphy_read_statusHeiner Kallweit1-4/+0
After recent changes to genphy_read_status() this orphaned register read remained as leftover. So remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: phy: use phy_resolve_aneg_linkmode in genphy_read_statusHeiner Kallweit1-23/+1
Now that we have phy_resolve_aneg_linkmode() we can make genphy_read_status() much simpler. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13net: phy: Move of_set_phy_eee_broken to phy-core.cMaxime Chevallier1-28/+0
Since of_set_phy_supported was moved to phy-core.c, we can also move of_set_phy_eee_broken to the same location, so that we have all OF functions in the same place. This patch doesn't intend to introduce any change in behaviour. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13net: phy: Mask-out non-compatible modes when setting the max-speedMaxime Chevallier1-53/+0
When setting a PHY's max speed using either the max-speed DT property or ethtool, we should mask-out all non-compatible modes according to the settings table, instead of just the 10/100BASET modes. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12net: phy: simplify genphy_config_eee_advertHeiner Kallweit1-21/+6
Use new function phy_modify_mmd_changed(), the result speaks for itself. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-10net: phy: use phy_modify_changed in genphy_config_advertHeiner Kallweit1-28/+15
Use phy_modify_changed() to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-09net: phy: Add support for asking the PHY its abilitiesAndrew Lunn1-16/+15
Add support for runtime determination of what the PHY supports, by adding a new function to the phy driver. The get_features call should set the phydev->supported member with the features the PHY supports. It is only called if phydrv->features is NULL. This requires minor changes to pause. The PHY driver should not set pause abilities, except for when it has odd cause capabilities, e.g. pause cannot be disabled. With this change, phydev->supported already contains the drivers abilities, including pause. So rather than considering phydrv->features, look at the phydev->supported, and enable pause if neither of the pause bits are already set. Signed-off-by: Andrew Lunn <andrew@lunn.ch> [hkallweit1@gmail.com: fixed small checkpatch complaint in one comment] Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-09net: phy: probe the PHY before determining the supported featuresAndrew Lunn1-11/+13
We will soon support asking the PHY at runtime to determine what features it supports, rather than forcing it to be compile time. But we should probe the PHY first. So probe the phy driver earlier. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-09net: phy: remove unneeded masking of PHY register read resultsHeiner Kallweit1-6/+6
PHY registers are only 16 bits wide, therefore, if the read was successful, there's no need to mask out the higher 16 bits. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08net: phy: disregard "Clause 22 registers present" bit in get_phy_c45_devs_in_pkgHeiner Kallweit1-0/+3
Bit 0 in register 1.5 doesn't represent a device but is a flag that Clause 22 registers are present. Therefore disregard this bit when populating the device list. If code needs this information it should read register 1.5 directly instead of accessing the device list. Because this bit doesn't represent a device don't define a MDIO_MMD_XYZ constant, just define a MDIO_DEVS_XYZ constant for the flag in the device list bitmap. v2: - make masking of bit 0 more explicit - improve commit message Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08net: phy: don't double-read link status register if link is upHeiner Kallweit1-1/+5
The link status register latches link-down events. Therefore, if link is reported as being up, there's no need for a second read. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08net: phy: consider latched link-down status in polling modeHeiner Kallweit1-4/+9
The link status value latches link-down events. To get the current status we read the register twice in genphy_update_link(). There's a potential risk that we miss a link-down event in polling mode. This may cause issues if the user e.g. connects his machine to a different network. On the other hand reading the latched value may cause issues in interrupt mode. Following scenario: - After boot link goes up - phy_start() is called triggering an aneg restart, hence link goes down and link-down info is latched. - After aneg has finished link goes up and triggers an interrupt. Interrupt handler reads link status, means it reads the latched "link is down" info. But there won't be another interrupt as long as link stays up, therefore phylib will never recognize that link is up. Deal with both scenarios by reading the register twice in interrupt mode only. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24net: phy: change phy_start_interrupts to phy_request_interruptHeiner Kallweit1-2/+2
Now that we enable the interrupts in phy_start() we don't have to do it before. Therefore remove enabling interrupts from phy_start_interrupts() and rename this function to reflect the changed functionality. v2: - improve warning to clearly state that we fall back to polling Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24net: phy: start state machine in phy_start onlyHeiner Kallweit1-1/+0
The state machine is a no-op before phy_start() has been called. Therefore let's enable it in phy_start() only. In phy_start() let's call phy_start_machine() instead of phy_trigger_machine(). phy_start_machine is an alias for phy_trigger_machine but it makes clearer that we start the state machine here instead of just triggering a run. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: phy: Convert some PHY and MDIO driver files to SPDX headersAndrew Lunn1-6/+1
Where the license text and the MODULE_LICENSE() value agree, convert to using an SPDX header, removing the license text. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.