aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/phy (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-12-19net: sfp: report error on failure to read sfp soft statusRussell King1-2/+9
Report a rate-limited error if we fail to read the SFP soft status, and preserve the current status in that case. This avoids I2C bus errors from triggering a link flap. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-19net: phy: marvell: use genphy_check_and_restart_aneg()Russell King1-20/+1
Use the helper to check and restart autonegotiation for the marvell fiber page negotiation setting. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-19net: phy: marvell: use phy_modify_changed()Russell King1-16/+10
Use phy_modify_changed() to change the fiber advertisement register rather than open coding this functionality. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-19net: phy: marvell: use existing clause 37 definitionsRussell King1-18/+8
Use existing clause 37 advertising/link partner definitions rather than private ones for the advertisement registers. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-19net: phy: marvell: consolidate phy status readingRussell King1-43/+17
marvell_read_status_page_an() always reads the PHY status register, but marvell_update_link() has already done this. Rather than wastefully reading the register twice in quick succession, read it once in marvell_read_status_page() and use the result for both. This makes marvell_update_link() rather pointless, so move it into marvell_read_status_page(). Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-19net: phy: marvell: use positive logic for link stateRussell King1-4/+3
Rather than using negative logic: if (there is no link) set link = 0 else set link = 1 use the more natural positive logic: if (there is link) set link = 1 else set link = 0 Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-19net: phy: marvell: initialise link partner state earlierRussell King1-20/+5
Move the initialisation of the link partner state earlier, inside marvell_read_status_page(), so we don't have the same initialisation scattered amongst the other files. This is in a similar place to the genphy implementation, so would result in the same behaviour if a PHY read error occurs. This allows us to get rid of marvell_read_status_page_fixed(), which became a pointless wrapper around genphy_read_status_fixed(). Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-19net: phy: marvell: rearrange to use genphy_read_lpa()Russell King1-34/+32
Rearrange the Marvell PHY driver to use genphy_read_lpa() rather than open-coding this functionality. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-19net: phy: provide and use genphy_read_status_fixed()Russell King3-47/+40
There are two drivers and generic code which contain exactly the same code to read the status of a PHY operating without autonegotiation enabled. Rather than duplicate this code, provide a helper to read this information. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-19net: phy: add genphy_check_and_restart_aneg()Russell King1-17/+31
Add a helper for restarting autonegotiation(), similar to the clause 45 variant. Use it in __genphy_config_aneg() Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-19net: phy: use phy_resolve_aneg_pause()Russell King3-14/+3
Several drivers code their own version of this, working from the LPA register, after setting the ethtool link partner advertisement bitmask. Use the generic function instead. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-19net: phy: remove redundant .aneg_done initialisersRussell King2-7/+0
Remove initialisers that set .aneg_done to genphy_aneg_done - this is the default for clause 22 PHYs, so the initialiser is redundant. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-17net: phylink: extend clause 45 PHY validation workaroundRussell King1-9/+13
Commit e45d1f5288b8 ("net: phylink: support Clause 45 PHYs on SFP+ modules") added a workaround to support clause 45 PHYs which dynamically switch their interface mode on SFP+ modules. This was implemented by validating the PHYs supported/advertising using PHY_INTERFACE_MODE_NA, rather than the specific interface mode that we attached the PHY with. However, we already have a situation where phylink is used to connect a Marvell 88X3310 PHY which also behaves in exactly the same way, but which seemingly doesn't need this. The reason seems to be that the mvpp2 driver sets a whole bunch of link modes for PHY_INTERFACE_MODE_10GKR down to 10Mb/s, despite 10GBASE-R not actually supporting anything but 10Gb/s speeds. When testing with drivers that (correctly) take the mvneta approach, where the validate() method only returns what can be supported / advertised for the specified link mode, we find that Clause 45 PHYs do not behave as we expect: their advertisement is restricted to what the current link will support, rather than what the PHY supports through its dynamic switching. Extend this workaround to all such cases; if we have a Clause 45 PHY attaching via any means, except in USXGMII, XAUI and RXAUI which are all unable to support this dynamic switching or have other solutions to it, then we need to validate using PHY_INTERFACE_MODE_NA. This should allow mvpp2 to switch to a more conformant validate() implementation. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-17net: phylink: improve clause 45 PHY ksettings_set implementationRussell King1-31/+53
While testing ethtool with the Methode DM7052 module, it was noticed that attempting to set the advertising mask results in the mask being truncated to the support offered by the currently chosen PHY interface mode. When a PHY dynamically changes the PHY interface mode, limiting the advertising mask in this way is not correct - if the PHY happened to negotiate 10GBASE-T, and selected 10GBASE-R as the host interface, we don't want to restrict the advertisement to just 10GBASE-* modes. Rework setting the advertisement to take account of this; do not pass the requested advertisement through phylink_validate(), but rely on the advertisement restriction (supported mask) set when the PHY was initially setup. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-14net: phylink: propagate phy_attach_direct() return codeRussell King1-3/+6
of_phy_attach() hides the return value of phy_attach_direct(), forcing us to return a "generic" ENODEV error code that is indistinguishable from the lack-of-phy-property case. Switch to using of_phy_find_device() to find the PHY device, and then propagating any phy_attach_direct() error back to the caller. Link: https://lore.kernel.org/lkml/20191210113829.GT25745@shell.armlinux.org.uk Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-12-14net: phy: dp83869: Remove unneeded semicolonzhengbin1-1/+1
Fixes coccicheck warning: drivers/net/phy/dp83869.c:337:2-3: Unneeded semicolon Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-12-11net: sfp: re-attempt probing for phyRussell King1-17/+42
Some 1000BASE-T PHY modules take a while for the PHY to wake up. Retry the probe a number of times before deciding that the module has no PHY. Tested with: Sourcephotonics SPGBTXCNFC - PHY takes less than 50ms to respond. Champion One 1000SFPT - PHY takes about 200ms to respond. Mikrotik S-RJ01 - no PHY Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: sfp: error handling for phy probeRussell King1-9/+17
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: sfp: rename sm_retriesRussell King1-5/+5
Rename sm_retries as sm_fault_retries, as this is what this member is tracking. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: sfp: use a definition for the fault recovery attemptsRussell King1-3/+11
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: sfp: add support for Clause 45 PHYsRussell King1-4/+40
Some SFP+ modules have a Clause 45 PHY onboard, which is accessible via the normal I2C address. Detect 10G BASE-T PHYs which may have an accessible PHY and probe for it. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: phy: add Broadcom BCM84881 PHY driverRussell King3-0/+276
Add a rudimentary Clause 45 driver for the BCM84881 PHY, found on Methode DM7052 SFPs. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: phylink: make Broadcom BCM84881 based SFPs workRussell King1-2/+16
The Broadcom BCM84881 does not appear to send the SGMII control word when operating in SGMII mode, which causes network adapters to fail to link with the PHY, or decide to operate at fixed 1G speed, even if the PHY negotiated 100M. Work around this by detecting the Broadcom BCM84881 and switch to phy mode rather than inband mode. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: phylink: delay MAC configuration for copper SFP modulesRussell King2-10/+71
Knowing whether we need to delay the MAC configuration because a module may have a PHY is useful to phylink to allow NBASE-T modules to work on systems supporting no more than 2.5G speeds. This commit allows us to delay such configuration until after the PHY has been probed by recording the parsed capabilities, and if the module may have a PHY, doing no more until the module_start() notification is called. At that point, we either have a PHY, or we don't. We move the PHY-based setup a little later, and use the PHYs support capabilities rather than the EEPROM parsed capabilities to determine whether we can support the PHY. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: phylink: split phylink_sfp_module_insert()Russell King1-19/+28
Split out the configuration step from phylink_sfp_module_insert() so we can re-use this later. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: phylink: split link_an_mode configured and current settingsRussell King1-28/+31
Split link_an_mode between the configured setting and the current operating setting. This is an important distinction to make when we need to configure PHY mode for a plugged SFP+ module that does not use in-band signalling. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: phylink: support Clause 45 PHYs on SFP+ modulesRussell King1-5/+16
Some SFP+ modules have Clause 45 PHYs embedded on them, which need a little more handling in order to ensure that they are correctly setup, as they switch the PHY link mode according to the negotiated speed. With Clause 22 PHYs, we assumed that they would operate in SGMII mode, but this assumption is now false. Adapt phylink to support Clause 45 PHYs on SFP+ modules. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: phylink: re-split __phylink_connect_phy()Russell King1-15/+24
In order to support Clause 45 PHYs on SFP+ modules, which have an indeterminant phy interface mode, we need to be able to call phylink_bringup_phy() with a different interface mode to that used when binding the PHY. Reduce __phylink_connect_phy() to an attach operation, and move the call to phylink_bringup_phy() to its call sites. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: mdio-i2c: add support for Clause 45 accessesRussell King1-8/+20
Some SFP+ modules have PHYs on them just like SFP modules do, except they are Clause 45 PHYs. The I2C protocol used to access them is modified slightly in order to send the device address and 16-bit register index. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: sfp: move phy_start()/phy_stop() to phylinkRussell King2-2/+22
Move phy_start() and phy_stop() into the module_start and module_stop notifications in phylink, rather than having them in the SFP code. This gives phylink responsibility for controlling the PHY, rather than having SFP start and stop the PHY state machine. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: sfp: add module start/stop upstream notificationsRussell King3-0/+31
When dealing with some copper modules, we can't positively know the module capabilities are until we have probed the PHY. Without the full capabilities, we may end up failing a module that we could otherwise drive with a restricted set of capabilities. An example of this would be a module with a NBASE-T PHY plugged into a host that supports phy interface modes 2500BASE-X and SGMII. The PHY supports 10GBASE-R, 5000BASE-X, 2500BASE-X, SGMII interface modes, which means a subset of the capabilities are compatible with the host. However, reading the module EEPROM leads us to believe that the module only supports ethtool link mode 10GBASE-T, which is incompatible with the host - and thus results in the module being rejected. This patch adds an extra notification which are triggered after the SFP module's PHY probe, and a corresponding notification just before the PHY is removed. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: sfp: add more extended compliance codesRussell King2-26/+38
SFF-8024 is used to define various constants re-used in several SFF SFP-related specifications. Split these constants from the enum, and rename them to indicate that they're defined by SFF-8024. Add and use updated SFF-8024 extended compliance code definitions for 10GBASE-T, 5GBASE-T and 2.5GBASE-T modules. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: sfp: derive interface mode from ethtool link modesRussell King3-9/+6
We don't need the EEPROM ID to derive the phy interface mode as we can derive it merely from the ethtool link modes. Remove the EEPROM ID argument to sfp_select_interface(). Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: sfp: remove incomplete 100BASE-FX and 100BASE-LX supportRussell King2-15/+2
The 100BASE-FX and 100BASE-LX support assumes a PHY is present; this is probably an incorrect assumption. In any case, sfp_parse_support() will fail such a module. Let's stop pretending we support these modules. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09net: phy: dp83867: Add rx-fifo-depth and tx-fifo-depthDan Murphy1-13/+49
This code changes the TI specific ti,fifo-depth to the common tx-fifo-depth property. The tx depth is applicable for both RGMII and SGMII modes of operation. rx-fifo-depth was added as well but this is only applicable for SGMII mode. So in summary if RGMII mode write tx fifo depth only if SGMII mode write both rx and tx fifo depths If the property is not populated in the device tree then set the value to the default values. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09net: sfp: avoid tx-fault with Nokia GPON moduleRussell King1-12/+30
The Nokia GPON module can hold tx-fault active while it is initialising which can take up to 60s. Avoid this causing the module to be declared faulty after the SFP MSA defined non-cooled module timeout. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-07net: phy: dp83867: fix hfs boot in rgmii modeGrygorii Strashko1-48/+71
The commit ef87f7da6b28 ("net: phy: dp83867: move dt parsing to probe") causes regression on TI dra71x-evm and dra72x-evm, where DP83867 PHY is used in "rgmii-id" mode - the networking stops working. Unfortunately, it's not enough to just move DT parsing code to .probe() as it depends on phydev->interface value, which is set to correct value abter the .probe() is completed and before calling .config_init(). So, RGMII configuration can't be loaded from DT. To fix and issue - move RGMII validation code to .config_init() - parse RGMII parameters in dp83867_of_init(), but consider them as optional. Fixes: ef87f7da6b28 ("net: phy: dp83867: move dt parsing to probe") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06phy: mdio-thunder: add missed pci_release_regions in removeChuhong Yuan1-0/+1
The driver forgets to call pci_release_regions() in remove like that in probe failure. Add the missed call to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04net: sfp: fix hwmonRussell King1-9/+4
The referenced commit below allowed more than one hwmon device to be created per SFP, which is definitely not what we want. Avoid this by only creating the hwmon device just as we transition to WAITDEV state. Fixes: 139d3a212a1f ("net: sfp: allow modules with slow diagnostics to probe") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04net: sfp: fix unbindRussell King1-0/+4
When unbinding, we don't correctly tear down the module state, leaving (for example) the hwmon registration behind. Ensure everything is properly removed by sending a remove event at unbind. Fixes: 6b0da5c9c1a3 ("net: sfp: track upstream's attachment state in state machine") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-01net: phy: realtek: fix using paged operations with RTL8105e / RTL8208Heiner Kallweit1-0/+9
It was reported [0] that since the referenced commit a warning is triggered in phylib that complains about paged operations being used with a PHY driver that doesn't support this. The commit isn't wrong, just for one chip version (RTL8105e) no dedicated PHY driver exists yet. So add the missing PHY driver. [0] https://bugzilla.kernel.org/show_bug.cgi?id=202103 Fixes: 3a129e3f9ac4 ("r8169: switch to phylib functions in more places") Reported-by: jhdskag3 <jhdskag3@tutanota.com> Tested-by: jhdskag3 <jhdskag3@tutanota.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-27net: phy: Use the correct style for SPDX License IdentifierNishad Kamdar5-6/+6
This patch corrects the SPDX License Identifier style in header files related to PHY Layer for Ethernet drivers. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). This patch also gives an explicit block comment to the SPDX License Identifier. Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-26net: phy: dp83869: Fix return paths to return proper valuesDan Murphy1-23/+26
Fix the return paths for all I/O operations to ensure that the I/O completed successfully. Then pass the return to the caller for further processing Fixes: 01db923e8377 ("net: phy: dp83869: Add TI dp83869 phy") Reported-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-2/+4
Merge in networking bug fixes for merge window. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-25net: phy: add helpers phy_(un)lock_mdio_busHeiner Kallweit1-14/+14
Add helpers to make locking/unlocking the MDIO bus easier. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-25mdio_bus: don't use managed reset-controllerDavid Bauer1-2/+4
Geert Uytterhoeven reported that using devm_reset_controller_get leads to a WARNING when probing a reset-controlled PHY. This is because the device devm_reset_controller_get gets supplied is not actually the one being probed. Acquire an unmanaged reset-control as well as free the reset_control on unregister to fix this. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> CC: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David Bauer <mail@david-bauer.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-23net: phylink: rename mac_link_state() op to mac_pcs_get_state()Russell King1-9/+6
Rename the mac_link_state() method to mac_pcs_get_state() to make it clear that it should be returning the MACs PCS current state, which is used for inband negotiation rather than just reading back what the MAC has been configured for. Update the documentation to explicitly mention that this is for inband. We drop the return value as well; most of phylink doesn't check the return value and it is not clear what it should do on error - instead arrange for state->link to be false. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23net: phy: initialise phydev speed and duplex sanelyRussell King1-2/+2
When a phydev is created, the speed and duplex are set to zero and -1 respectively, rather than using the predefined SPEED_UNKNOWN and DUPLEX_UNKNOWN constants. There is a window at initialisation time where we may report link down using the 0/-1 values. Tidy this up and use the predefined constants, so debug doesn't complain with: "Unsupported (update phy-core.c)/Unsupported (update phy-core.c)" when the speed and duplex settings are printed. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23net: phy: remove phy_ethtool_sset()Russell King1-60/+0
There are no users of phy_ethtool_sset() in the kernel anymore, and as of commit 3c1bcc8614db ("net: ethernet: Convert phydev advertize and supported from u32 to link mode"), the implementation is slightly buggy - it doesn't correctly check the masked advertising mask as it used to. Remove it, and update the phy documentation to refer to its replacement function. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-10/+24
Minor conflict in drivers/s390/net/qeth_l2_main.c, kept the lock from commit c8183f548902 ("s390/qeth: fix potential deadlock on workqueue flush"), removed the code which was removed by commit 9897d583b015 ("s390/qeth: consolidate some duplicated HW cmd code"). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.