aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/phy (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-02-06net: phy: make use of new MMD accessorsHeiner Kallweit5-94/+38
Make use of the new MMD accessors. v2: - fix SoB Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06net: phy: provide full set of accessor functions to MMD registersNikita Yushchenko1-13/+103
This adds full set of locked and unlocked accessor functions to read and write PHY MMD registers and/or bitfields. Set of functions exactly matches what is already available for PHY legacy registers. Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04net: phy: fixed-phy: Drop GPIO from fixed_phy_add()Linus Walleij1-22/+60
All users of the fixed_phy_add() pass -1 as GPIO number to the fixed phy driver, and all users of fixed_phy_register() pass -1 as GPIO number as well, except for the device tree MDIO bus. Any new users should create a proper device and pass the GPIO as a descriptor associated with the device so delete the GPIO argument from the calls and drop the code looking requesting a GPIO in fixed_phy_add(). In fixed phy_register(), investigate the "fixed-link" node and pick the GPIO descriptor from "link-gpios" if this property exists. Move the corresponding code out of of_mdio.c as the fixed phy code anyways requires OF to be in use. Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-03net: phy: aquantia: replace magic numbers with constantsHeiner Kallweit1-14/+66
Replace magic numbers with proper constants. The original patch is from Andrew, I extended / adjusted certain parts: - Use decimal bit numbers. The datasheet uses hex bit numbers 0 .. F. - Order defines from highest to lowest bit numbers - correct some typos - add constant MDIO_AN_TX_VEND_INT_MASK2_LINK - Remove few functional improvements from the patch, they will come as a separate patch. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-03net: phy: aquantia: use macro PHY_ID_MATCH_MODELHeiner Kallweit1-18/+12
Make use of macro PHY_ID_MATCH_MODEL to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-03net: phy: aquantia: remove unneeded includesHeiner Kallweit1-3/+0
Remove unneeded header includes. v2: - leave kernel.h in Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-03net: phy: aquantia: Shorten name space prefix to aqr_Andrew Lunn1-32/+32
aquantia_ as a name space prefix is rather long, resulting in lots of lines needing wrapping, reducing readability. Use the prefix aqr_ instead, which fits with the vendor naming there devices aqr107, for example. v2: - add SoB from Heiner Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-03net: phy: realtek: add generic Realtek PHY driverHeiner Kallweit1-0/+9
The integrated PHY's of later RTL8168 network chips report the generic PHYID 0x001cc800 (Realtek OUI, model and revision number both set to zero) and therefore currently the genphy driver is used. To be able to use the paged version of e.g. phy_write() we need a PHY driver with the read_page and write_page callbacks implemented. So basically make a copy of the genphy driver, just with the read_page and write_page callbacks being set. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-27net: phy: at803x: Use helpers to access MMD PHY registersCarlo Caione1-13/+3
Libphy provides a standard set of helpers to access the MMD PHY registers. Use those instead of relying on custom driver-specific functions. Signed-off-by: Carlo Caione <ccaione@baylibre.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-28/+5
2019-01-24net: phy: change phy_start_interrupts to phy_request_interruptHeiner Kallweit3-16/+15
Now that we enable the interrupts in phy_start() we don't have to do it before. Therefore remove enabling interrupts from phy_start_interrupts() and rename this function to reflect the changed functionality. v2: - improve warning to clearly state that we fall back to polling Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24net: phy: start interrupts in phy_startHeiner Kallweit1-20/+14
Interrupts don't have to be enabled before calling phy_start(). Therefore let's enable them in phy_start(). In a subsequent step we'll remove enabling interrupts from phy_connect_direct(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24net: phy: warn if phy_start is called from invalid stateHeiner Kallweit1-2/+9
phy_start() should be called from states PHY_READY or PHY_HALTED only. Check for this to detect misbehaving drivers. Also the state machine should be started only when being called from one of the valid states. Some more background: For all invalid states phy_start() basically was a no-op. All it did was triggering a state machine run, but for all "running" states the poll loop was active anyway. And if called from PHY_DOWN, the state machine does nothing. v3: - extended commit message Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24net: phy: start state machine in phy_start onlyHeiner Kallweit3-3/+1
The state machine is a no-op before phy_start() has been called. Therefore let's enable it in phy_start() only. In phy_start() let's call phy_start_machine() instead of phy_trigger_machine(). phy_start_machine is an alias for phy_trigger_machine but it makes clearer that we start the state machine here instead of just triggering a run. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: phy: Add SDPX tag based on COPYING fileAndrew Lunn7-34/+13
Some of the PHY and MDIO drivers refer to the COPYING file in the main directory of this archive. This is the main license for Linux, thus GPLv2 plus syscall extension. Fixup the MODULE_LICENSE() where needed and add an SDPX header for GPLv2. Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: phy: Fixup GPLv2 SPDX tags based on license textAndrew Lunn8-55/+16
A few PHY drivers have the GPLv2 license text. They then either have a MODULE_LICENSE() of GPLv2+, or an SPDX tag of GPLv2+. Since the license text is much easier to understand than either the SPDX tag or the MODULE_LICENSE, use it as the definitive source of the licence, and fixup with others when there are contradictions. Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: Laurent Pinchart <laurentp@cse-semaphore.com> Cc: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Cc: Scott Wood <scottwood@freescale.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Andrew F. Davis <afd@ti.com> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: phy: Fixup GPLv2+ SPDX tags based on license textAndrew Lunn3-28/+5
A few PHY drivers have the GPLv2+ license text. They then either have a MODULE_LICENSE() of GPLv2 only, or an SPDX tag of GPLv2 only. Since the license text is much easier to understand than either the SPDX tag or the MODULE_LICENSE, use it as the definitive source of the licence, and fixup the others when there are contradictions. Cc: David Wu <david.wu@rock-chips.com> Cc: Dongpo Li <lidongpo@hisilicon.com> Cc: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: phy: Remove redundent License text when SPDX header is presentAndrew Lunn2-14/+0
The SPDX header makes any license text redundent. Remove it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: phy: Convert some PHY and MDIO driver files to SPDX headersAndrew Lunn51-323/+52
Where the license text and the MODULE_LICENSE() value agree, convert to using an SPDX header, removing the license text. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: phy: at803x: Disable phy delay for RGMII modeVinod Koul1-10/+12
For RGMII mode, phy delay should be disabled. Add this case along with disable delay routines. Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: phy: improve phy_init_hwHeiner Kallweit1-2/+5
Currently the soft reset (if defined) is done only if the driver also implements the config_init callback. I think this dependency is a mistake, so let's remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: phy: fix issue with loading PHY driver w/o initramfsHeiner Kallweit1-3/+5
It was reported that on a system with nfsboot and w/o initramfs network fails because trying to load the PHY driver returns -ENOENT. Reason was that due to missing initramfs the modprobe binary isn't available. So we have to ignore error code -ENOENT. Fixes: 13d0ab6750b2 ("net: phy: check return code when requesting PHY driver module") Reported-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller9-14/+67
Completely minor snmp doc conflict. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19net: phy: phy driver features are mandatoryCamelia Groza1-0/+5
Since phy driver features became a link_mode bitmap, phy drivers that don't have a list of features configured will cause the kernel to crash when probed. Prevent the phy driver from registering if the features field is missing. Fixes: 719655a14971 ("net: phy: Replace phy driver features u32 with link_mode bitmap") Reported-by: Scott Wood <oss@buserror.net> Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: phy: remove phy_stop_interruptsHeiner Kallweit2-19/+2
Interrupts have been disabled in phy_stop() already. So we can remove phy_stop_interrupts() and free the interrupt in phy_disconnect() directly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: phy: ensure phylib state machine is stopped after calling phy_stopHeiner Kallweit2-2/+1
The call to the phylib state machine in phy_stop() just ensures that the state machine isn't re-triggered, but a state machine call may be scheduled already. So lets's call phy_stop_machine(). This also allows to get rid of the call to phy_stop_machine() in phy_disconnect(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: phy: stop PHY if needed when entering phy_disconnectHeiner Kallweit1-0/+3
Stop PHY if needed when entering phy_disconnect. This allows drivers that don't need a separate call to phy_stop() to omit this call. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: phy: improve get_phy_idHeiner Kallweit1-9/+2
Only caller of get_phy_id() is get_phy_device(). There a PHY ID of 0xffffffff is translated back to -ENODEV. So we can avoid some overhead by returning -ENODEV directly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: phy: remove state PHY_CHANGELINKHeiner Kallweit1-2/+0
Since recent changes to the phylib state machine state PHY_CHANGELINK isn't used any longer. Therefore let's remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: phy: mdio_bus: add missing device_del() in mdiobus_register() error handlingThomas Petazzoni1-0/+1
The current code in __mdiobus_register() doesn't properly handle failures returned by the devm_gpiod_get_optional() call: it returns immediately, without unregistering the device that was added by the call to device_register() earlier in the function. This leaves a stale device, which then causes a NULL pointer dereference in the code that handles deferred probing: [ 1.489982] Unable to handle kernel NULL pointer dereference at virtual address 00000074 [ 1.498110] pgd = (ptrval) [ 1.500838] [00000074] *pgd=00000000 [ 1.504432] Internal error: Oops: 17 [#1] SMP ARM [ 1.509133] Modules linked in: [ 1.512192] CPU: 1 PID: 51 Comm: kworker/1:3 Not tainted 4.20.0-00039-g3b73a4cc8b3e-dirty #99 [ 1.520708] Hardware name: Xilinx Zynq Platform [ 1.525261] Workqueue: events deferred_probe_work_func [ 1.530403] PC is at klist_next+0x10/0xfc [ 1.534403] LR is at device_for_each_child+0x40/0x94 [ 1.539361] pc : [<c0683fbc>] lr : [<c0455d90>] psr: 200e0013 [ 1.545628] sp : ceeefe68 ip : 00000001 fp : ffffe000 [ 1.550863] r10: 00000000 r9 : c0c66790 r8 : 00000000 [ 1.556079] r7 : c0457d44 r6 : 00000000 r5 : ceeefe8c r4 : cfa2ec78 [ 1.562604] r3 : 00000064 r2 : c0457d44 r1 : ceeefe8c r0 : 00000064 [ 1.569129] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 1.576263] Control: 18c5387d Table: 0ed7804a DAC: 00000051 [ 1.582013] Process kworker/1:3 (pid: 51, stack limit = 0x(ptrval)) [ 1.588280] Stack: (0xceeefe68 to 0xceef0000) [ 1.592630] fe60: cfa2ec78 c0c03c08 00000000 c0457d44 00000000 c0c66790 [ 1.600814] fe80: 00000000 c0455d90 ceeefeac 00000064 00000000 0d7a542e cee9d494 cfa2ec78 [ 1.608998] fea0: cfa2ec78 00000000 c0457d44 c0457d7c cee9d494 c0c03c08 00000000 c0455dac [ 1.617182] fec0: cf98ba44 cf926a00 cee9d494 0d7a542e 00000000 cf935a10 cf935a10 cf935a10 [ 1.625366] fee0: c0c4e9b8 c0457d7c c0c4e80c 00000001 cf935a10 c0457df4 cf935a10 c0c4e99c [ 1.633550] ff00: c0c4e99c c045a27c c0c4e9c4 ced63f80 cfde8a80 cfdebc00 00000000 c013893c [ 1.641734] ff20: cfde8a80 cfde8a80 c07bd354 ced63f80 ced63f94 cfde8a80 00000008 c0c02d00 [ 1.649936] ff40: cfde8a98 cfde8a80 ffffe000 c0139a30 ffffe000 c0c6624a c07bd354 00000000 [ 1.658120] ff60: ffffe000 cee9e780 ceebfe00 00000000 ceeee000 ced63f80 c0139788 cf8cdea4 [ 1.666304] ff80: cee9e79c c013e598 00000001 ceebfe00 c013e44c 00000000 00000000 00000000 [ 1.674488] ffa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000 [ 1.682671] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.690855] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 1.699058] [<c0683fbc>] (klist_next) from [<c0455d90>] (device_for_each_child+0x40/0x94) [ 1.707241] [<c0455d90>] (device_for_each_child) from [<c0457d7c>] (device_reorder_to_tail+0x38/0x88) [ 1.716476] [<c0457d7c>] (device_reorder_to_tail) from [<c0455dac>] (device_for_each_child+0x5c/0x94) [ 1.725692] [<c0455dac>] (device_for_each_child) from [<c0457d7c>] (device_reorder_to_tail+0x38/0x88) [ 1.734927] [<c0457d7c>] (device_reorder_to_tail) from [<c0457df4>] (device_pm_move_to_tail+0x28/0x40) [ 1.744235] [<c0457df4>] (device_pm_move_to_tail) from [<c045a27c>] (deferred_probe_work_func+0x58/0x8c) [ 1.753746] [<c045a27c>] (deferred_probe_work_func) from [<c013893c>] (process_one_work+0x210/0x4fc) [ 1.762888] [<c013893c>] (process_one_work) from [<c0139a30>] (worker_thread+0x2a8/0x5c0) [ 1.771072] [<c0139a30>] (worker_thread) from [<c013e598>] (kthread+0x14c/0x154) [ 1.778482] [<c013e598>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) [ 1.785689] Exception stack(0xceeeffb0 to 0xceeefff8) [ 1.790739] ffa0: 00000000 00000000 00000000 00000000 [ 1.798923] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.807107] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 1.813724] Code: e92d47f0 e1a05000 e8900048 e1a00003 (e5937010) [ 1.819844] ---[ end trace 3c2c0c8b65399ec9 ]--- The actual error that we had from devm_gpiod_get_optional() was -EPROBE_DEFER, due to the GPIO being provided by a driver that is probed later than the Ethernet controller driver. To fix this, we simply add the missing device_del() invocation in the error path. Fixes: 69226896ad636 ("mdio_bus: Issue GPIO RESET to PHYs") Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17net: phy: add missing phy driver featuresCamelia Groza2-0/+2
The phy drivers for CS4340 and TN2020 are missing their features attributes. Add them. Fixes: 719655a14971 ("net: phy: Replace phy driver features u32 with link_mode bitmap") Reported-by: Scott Wood <oss@buserror.net> Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17net: phy: micrel: use phy_read_mmd and phy_write_mmdHeiner Kallweit1-32/+11
This driver implements open-coded versions of phy_read_mmd() and phy_write_mmd() for KSZ9031. That's not needed, let's use the phylib functions directly. This is compile-tested only because I have no such hardware. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17net: phy: check return code when requesting PHY driver moduleHeiner Kallweit1-5/+30
When requesting the PHY driver module fails we'll bind the genphy driver later. This isn't obvious to the user and may cause, depending on the PHY, different types of issues. Therefore check the return code of request_module(). Note that we only check for failures in loading the module, not whether a module exists for the respective PHY ID. v2: - add comment explaining what is checked and what is not - return error from phy_device_create() if loading module fails Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17net: phy: Add helpers to determine if PHY driver is genericFlorian Fainelli1-2/+32
We are already checking in phy_detach() that the PHY driver is of generic kind (1G or 10G) and we are going to make use of that in the SFP layer as well for 1000BaseT SFP modules, so expose helper functions to return that information. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-16net: phy: don't include asm/irq.h directlyHeiner Kallweit3-6/+0
There's no need to and one shouldn't include asm/irq.h directly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-16net: phy: improve logging in phylibHeiner Kallweit2-6/+3
Some time ago phydev_info() and friends have been added. They allow to improve and simplify logging. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-16net: phy: remove preliminary workaround for not loading PHY driverHeiner Kallweit1-8/+0
This workaround attempt helped for some but not all affected users. With commit 11287b693d03 ("r8169: load Realtek PHY driver module before r8169") we have a better workaround now, so we an remove the first attempt. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-16net: phy: Add missing features to PHY driversAndrew Lunn3-0/+15
The bcm87xx and micrel driver has PHYs which are missing the .features value. Add them. The bcm87xx is a 10G FEC only PHY. Add the needed features definition of this PHY. Fixes: 719655a14971 ("net: phy: Replace phy driver features u32 with link_mode bitmap") Reported-by: Scott Wood <oss@buserror.net> Reported-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-15net: phy: meson-gxl: Use the genphy_soft_reset callbackTimotej Lazar1-0/+1
Since the referenced commit, Ethernet fails to come up at boot on the board meson-gxl-s905x-libretech-cc. Fix this by re-enabling the genphy_soft_reset callback for the Amlogic Meson GXL PHY driver. Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") Signed-off-by: Timotej Lazar <timotej.lazar@araneo.si> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-15net: phy: marvell: Fix deadlock from wrong lockingAndrew Lunn1-1/+1
m88e1318_set_wol() takes the lock as part of phy_select_page(). Don't take the lock again with phy_read(), use the unlocked __phy_read(). Fixes: 424ca4c55121 ("net: phy: marvell: fix paged access races") Reported-by: Åke Rehnman <ake.rehnman@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-15net: phy: marvell: Errata for mv88e6390 internal PHYsAndrew Lunn1-1/+34
The VOD can be out of spec, unless some magic value is poked into an undocumented register in an undocumented page. Fixes: e4cf8a38fc0d ("net: phy: Marvell: Add mv88e6390 internal PHY") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-15net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ9031Heiner Kallweit1-0/+1
So far genphy_soft_reset was used automatically if the PHY driver didn't implement the soft_reset callback. This changed with the mentioned commit and broke KSZ9031. To fix this configure the KSZ9031 PHY driver to use genphy_soft_reset. Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-15net: phy: fix too strict check in phy_start_anegHeiner Kallweit1-12/+7
When adding checks to detect wrong usage of the phylib API we added a check to phy_start_aneg() which is too strict. If the phylib state machine is in state PHY_HALTED we should allow reconfiguring and restarting aneg, and just don't touch the state. Fixes: 2b3e88ea6528 ("net: phy: improve phy state checking") Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-5/+2
Lots of conflicts, by happily all cases of overlapping changes, parallel adds, things of that nature. Thanks to Stephen Rothwell, Saeed Mahameed, and others for their guidance in these resolutions. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net: phy: mscc: Fix the VSC 8531/41 Chip Init sequenceRaju Lakkaraju1-1/+54
- Turn on Broadcast writes - UNH 1.8.1 clear bias for UNH 1000BT distortion - UNH 1.8.7 optimize pre-emphasis for 100BasTx UNH 100W fix - Enable Token-ring during 'Coma Mode' Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18net: phy: Fix the issue that netif always links up after resumingKunihiko Hayashi1-5/+2
Even though the link is down before entering hibernation, there is an issue that the network interface always links up after resuming from hibernation. If the link is still down before enabling the network interface, and after resuming from hibernation, the phydev->state is forcibly set to PHY_UP in mdio_bus_phy_restore(), and the link becomes up. In suspend sequence, only if the PHY is attached, mdio_bus_phy_suspend() calls phy_stop_machine(), and mdio_bus_phy_resume() calls phy_start_machine(). In resume sequence, it's enough to do the same as mdio_bus_phy_resume() because the state has been preserved. This patch fixes the issue by calling phy_start_machine() in mdio_bus_phy_restore() in the same way as mdio_bus_phy_resume(). Fixes: bc87922ff59d ("phy: Move PHY PM operations into phy_device") Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18net: phy: remove unused code in phy_probeHeiner Kallweit1-2/+0
3c1bcc8614db ("net: ethernet: Convert phydev advertize and supported from u32 to link mode") left some unused code in phy_probe(), remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18net: phy: print stack trace in phy_errorHeiner Kallweit1-0/+2
So far phy_error() silently stops the PHY state machine. If the network driver doesn't inform about a MDIO error then the user may wonder why his network is down. Let's print the stack trace to facilitate search for the root cause of the error. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18net: phy: improve phy state checkingHeiner Kallweit1-13/+21
Add helpers phy_is_started() and __phy_is_started() to avoid open-coded checks whether PHY has been started. To make the check easier move PHY_HALTED before PHY_UP in enum phy_state. Further improvements: phy_start_aneg(): Return -EBUSY and print warning if function is called from a non-started state (DOWN, READY, HALTED). Better check because function is exported and drivers may use it incorrectly. phy_interrupt(): Return IRQ_NONE also if state is DOWN or READY. We should never receive an interrupt in one of these states, but better play safe. phy_stop(): Just return and print a warning if PHY is in a non-started state. This warning should help to identify drivers with unbalanced calls to phy_start() / phy_stop(). phy_state_machine(): Schedule state machine run only if PHY is in a started state. E.g. if state is READY we don't need the state machine, it will be started by phy_start(). v2: - don't use __func__ within phy_warn_state v3: - use WARN() instead of printing error message to facilitate debugging Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-17Fixed PHY: Add fixed_phy_change_carrier()Joakim Tjernlund1-1/+23
Drivers can use this as .ndo_change_carrier() to change carrier via /sys/class/net/ethX/carrier. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.