aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/qlcnic/qlcnic_ethtool.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-07-14qlcnic: fix pause params settingRajesh Borundia1-0/+4
Turning off rx pause param and autoneg param is not supported so return error in that case. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09qlcnic: Check FW capability for TSOAnirban Chakraborty1-0/+3
Driver checks TSO capability from FW before enabling it. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-30netdev: Make ethtool_ops::set_flags() return -EINVAL for unsupported flagsBen Hutchings1-1/+1
The documented error code for attempts to set unsupported flags (or to clear flags that cannot be disabled) is EINVAL, not EOPNOTSUPP. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29qlcnic: fail when try to setup unsupported featuresStanislaw Gruszka1-3/+10
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23qlcnic: release device resources during interface downAmit Kumar Salecha1-2/+5
Previously we were allocating device resources during probe and release them during remove. Now alloc during interface up and release in interface down. This helps in device performance, as it doesn't need to keep track of inactive resources. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23qlcnic: cleanup skb allocationAmit Kumar Salecha1-2/+0
No need to maintian separate state for alloced and freed skb. This can be done by null check. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02qlcnic: NIC Partitioning - Add basic infrastructure supportAnirban Chakraborty1-5/+6
Following changes have been added to enable the adapter to work in NIC partitioning mode where multiple PCI functions of an adapter port can be configured to work as NIC functions. The first function that is enumerated on the PCI bus assumes the role of management function which, besides being able to do all the NIC functionality, can configure other NIC partitions. Other NIC functions can be configured as privileged or non privileged functions. Privileged function can not configure other NIC functions but can do all the NIC functionality including any firmware initialization, chip reset etc. Non privileged functions can do only basic IO. For chip reset etc, it depends on the privilege or management function. 1. Added code to determine PCI function number independent of kernel API. 2. Added Driver - FW version 2.0 support. 3. Changed producer and consumer register offset calculation. 4. Added management and privileged operation modes for npar functions. A module parameter has been added to control it. 5. Added support for configuring the eswitch in the adapter. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-14qlcnic: cleanup unused codeAmit Kumar Salecha1-1/+0
LRO ring, cut-thru mode and specific fw version are not valid to Qlogic CNA device. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-14qlcnic: remove obsolete registerAmit Kumar Salecha1-8/+1
MSI_MODE, CAPABILITIES_FW and SCRATCHPAD registers are obsolete. Driver should not use them. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22qlcnic: additional driver statisticsAmit Kumar Salecha1-0/+8
Added additional driver statistics to track errors in rcv/tx path. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03qlcnic: add driver debug supportAmit Kumar Salecha1-0/+16
Add debug print in driver, can be tuned by ethtool msg level callback. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08qlcnic: additional driver statistics.Sucheta Chakraborty1-0/+11
Statistics added for lro/lso bytes, count for tx stop queue and wake queue and skb alloc failure count. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08qlcnic: fix tx csum statusSucheta Chakraborty1-0/+6
Kernel default tx csum function (ethtool_op_get_tx_csum) doesn't show correct csum status. It takes various FLAGS (NETIF_F_ALL_CSUM) in account to show tx csum status, which driver doesn't set while disabling tx csum. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-02qlcnic: add loopback diagnostic testAmit Kumar Salecha1-1/+81
Loopback test (offline) added in ethtool self test. o Set device in loopback mode o Send packets o Process receive packets in qlcnic_process_rcv_ring_diag() o Compare packets o Reset device in normal mode. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-02qlcnic: add interrupt diagnostic testAmit Kumar Salecha1-1/+40
Interrupt test (offline) added in ethtool self test. Register a temporary interrupt handler and then send command to fw to raise an interrupt. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-02qlcnic: support LED blink for device identificationSucheta Chakraborty1-0/+26
Added support of device identification by blinking LED for specified time. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-02qlcnic: protect resoruce cleanup by rtnl lockAmit Kumar Salecha1-3/+3
o context resources can be in used, while resoruce cleanup is in progress, during fw recover. o Null pointer execption can occur in send_cmd_desc, if fw recovery module frees tx ring without rtnl lock. o Same applies to ethtool register dump and FW health registers should be dump in any case. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-16qlcnic: Qlogic ethernet driver for CNA devicesAmit Kumar Salecha1-0/+870
o 1G/10G Ethernet Driver for Qlgic QLE8240 and QLE8242 CNA devices. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.