aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/tg3.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-02-17tg3: Push phylib definitions to phylibMatt Carlson1-11/+3
This patch pushes phylib definitions out to phylib headers. For phy IDs, this removes some code duplication. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17tg3: Rename tg3 phy ID preprocessor definitionsMatt Carlson1-46/+45
The phylib presents the phy ID in a different format than the one tg3 has traditionally used. To highlight the distinction, this patch prepends the tg3 native phy ID format with TG3. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17tg3: Reformat SSID to phy ID tableMatt Carlson1-1/+33
This patch reformats the SSID to phy ID table, replacing constants with preprocessor definitions. This patch is also prep work for the following patch, which will push line lengths beyond 80 chars. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17tg3: Rename TG3_FLG3_RGMII_STD_IBND_DISABLEMatt Carlson1-2/+2
The STD part of this preprocessor definition is a bit of a misnomer. This flag is a coarse control of the RGMII inband status facilities. This patch renames the definition to be more accurate. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17tg3: Add support for 2 new selfboot formatsMatt Carlson1-0/+4
This patch adds new offsets to the bootcode version extraction code to support NVRAM format versions 4 and 5. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12tg3: Fix AC131 loopback test errors for 5785Matt Carlson1-0/+3
The AC131 does not enable the forced transmit clock settings immediately. The workaround is to read the register again to get the setting to take effect. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12tg3: Turn off multiple DMA reads for 5717Matt Carlson1-0/+1
The 5717's DMA read engine has a bug when initiating multiple DMA reads across the PCIe bus. This patch disables the feature. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12tg3: Fix 57765 A0 bootcode race conditionMatt Carlson1-0/+1
On A0 revision of 57765 asic rev devices, the bootcode will perform some hardware operations, after the magic signature is presented, that will collide with setup operations performed by the driver. The best way to avoid the contention is to have the driver delay an additional 10 milliseconds. B0 revisions of the chip will make this workaround unnecessary. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12tg3: Unwedge stuck MSI-X vectorsMatt Carlson1-0/+1
The previous patch changed the code so that new rx buffer submissions to the hardware stall if a new submission would overwrite data needed by an unserviced rx packet. On very busy 5717 and 57765 asic rev devices, there is a corner case where the hardware will fail to assert an MSI-X interrupt for rx traffic. If that vector's interrupt never has another reason to assert, any rx buffers held will never be serviced. If the buffers are never serviced and the hardware consumes all the available rx packets for other rx rings, deadlock will result. The most reliable and least intrusive way to work around the problem is to detect the case where new submissions would overwrite existing data and force all rx interrupt vectors to fire. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12tg3: Give MSI-X vec 1 rx backlog spaceMatt Carlson1-1/+1
RSS ring 1 is responsible for submitting new rx buffers to the hardware on behalf of all the other RSS rx return rings. Up until now this ring submitted its new rx buffers to the producer ring directly. The following patch will require that this ring have a place to put backlogged rx packets. As a consequence, it can no longer submit new buffers to the producer ring. This patch adds code to allocate an extra shadow producer ring for this RSS ring and adds RSS ring 1 to the list of rings needing buffer transfers. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-23Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller1-0/+3
2010-01-20tg3: Add 57765 phy ID and enable devices.Matt Carlson1-1/+2
This patch rounds out the 57765 asic rev support by adding the 57765 phy ID and entering the 57765 device IDs in the pci table. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-20tg3: Add 5717 serdes phy IDMatt Carlson1-2/+4
The serdes and copper phys of the 5717 asic rev have different phy IDs. This patch adds the serdes phy ID. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-20tg3: Improve internal resource allocationsMatt Carlson1-0/+4
The 5717 and the 57765 have more resources at their disposal internally. This patch tunes the driver to get better performance. The adjustments made here only apply to the 57765 and 5717 asic revs. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-20tg3: Enable PLL PD when CLKREQ disabled for 5717A0Matt Carlson1-0/+14
PCIe PLL power down cannot be used if CLKREQ is enabled because data corruption will occur. If CLKREQ is disabled though, enabling PCIE P1 PLL power-down saves some power. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13tg3: Update copyright and driver versionMatt Carlson1-0/+1
This patch updates the copyright notice for 2010 and updates the version number to 3.106. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13tg3: Add reliable serdes detection for 5717 A0Matt Carlson1-0/+2
The serdes status bit does not work as intended for the 5717 A0. This patch implements an alternative detection scheme that will only be valid for A0 revisions. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03tg3: Add some VPD preprocessor constantsMatt Carlson1-2/+8
This patch cleans up the VPD code by creating preprocessor definitions and using them in the place of hardcoded constants. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03tg3: Add 57765 asic revMatt Carlson1-0/+9
This patch adds the 57765 asic revision. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03tg3: Make TSS enable independent of MSI-X enableMatt Carlson1-0/+1
The 57765 asic rev has MSI-X capability, but does not support TSS. This patch changes the tx paths so that TSS is explicitly mentioned, rather than implied through the ENABLE_MSIX flag. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02tg3: remove use of skb_dma_map/unmapAlexander Duyck1-5/+1
Due to the fact that skb_dma_map/unmap do not work correctly when a HW IOMMU is enabled it has been recommended to go about removing the calls from the network device drivers. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Matt Carlson <mcarlson@broadcom.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Fix DIDs, Enable 5717 supportMatt Carlson1-4/+3
This patch fixes the 5717 variant device ID enumerations and adds those DIDs to the PCI ID table. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Add rx prod ring consolidationMatt Carlson1-0/+3
This patch adds code to funnel each MSI-X vector's rx packet buffers into a single set of producer rings which will then be submitted to the hardware. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Create aliases for rx producer mailbox regsMatt Carlson1-0/+4
The rx producer mailbox registers are used in several spots in the code. The addition of TG3_64BIT_REG_LOW makes register references uncomfortably long. This patch creates an alias for the standard and jumbo ring producer index registers to make the code cleaner. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Lay proucer ring handling groundworkMatt Carlson1-1/+1
The patch increases the number of producer rings available and implements the constructor and destructor code that deals with them. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: rename rx_[std|jmb]_ptrMatt Carlson1-2/+2
A later patch is going to add consumer indicies for the producer rings. To keep things readable, this patch renames rx_[std|jmb]_ptr to rx_[std|jmb]_prod_idx. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Allow DMAs to cross cacheline boundariesMatt Carlson1-2/+1
By default, the 5717 (and future chips) break up PCIe DMA packets across cacheline boundaries. This isn't necessary on x86. This patch selectively loosens the restriction. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Use tg3_start_xmit_dma_bug for 5717 A0Matt Carlson1-0/+1
The A0 revision of the 5717 has problems with short packet fragments. It needs to use the tg3_start_xmit_dma_bug() routine. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Add new HW_TSO_3 flag for 5717Matt Carlson1-1/+4
The 5717 sets up TSO slightly differently in the transmit path. It looks like this method will be the new way of doing things. This patch defines a flag to indicate this. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Move TG3_FLG2_PROTECTED_NVRAM to tg3_flags3Matt Carlson1-1/+1
We need room for another TSO flag and it would be most efficient if it resided in tg3_flags2. This patch moves the TG3_FLG2_PROTECTED_NVRAM to tg3_flags3 to make room. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15tg3: Add 5717 phy IDMatt Carlson1-1/+2
This patch adds the 5717 phy ID. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02tg3: Add 50610M phy ID for 5785Matt Carlson1-0/+1
This patch adds the 50610M phy ID for 5785. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02tg3: Add AC131 power down supportMatt Carlson1-0/+3
The AC131 does not respect the power down bit (bit 11) of the MII Control Register (reg 0x0). Instead, software is required to put the phy into standby power down mode through the shadow register set. This patch implements support for the AC131 standby power down mode. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02tg3: Improve 5785 PCIe performanceMatt Carlson1-1/+2
This patch improves 5785 performance by allowing the write DMA engine to request larger DMA burst sizes than it otherwise would. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02tg3: Prevent a PCIe tx glitchMatt Carlson1-1/+25
This patch prevents a PCIe tx glitch by allowing the transmitter to go to a low power state. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02tg3: Convert PHY_ADDR => TG3_PHY_MII_ADDRMatt Carlson1-1/+1
This patch renames the PHY_ADDR preprocessor definition. The following patch will identify a new member on the MDIO bus, so we want this preprocessor definition to be a little more descriptive. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02tg3: Fix disappearing 57780 devicesMatt Carlson1-1/+0
Under certain power saving conditions, 57780 asic rev devices might disappear from the system. The fix is to disallow the PCIe PLL from powering down. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02tg3: Fix 5906 transmit hangsMatt Carlson1-0/+1
The 5906 has trouble with fragments that are less than 8 bytes in size. This patch works around the problem by pivoting the 5906's transmit routine to tg3_start_xmit_dma_bug() and introducing a new SHORT_DMA_BUG flag that enables code to detect and react to the problematic condition. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02tg3: Assign flags to fixes in start_xmit_dma_bugMatt Carlson1-0/+2
This patch adds a flag for each bug workaround in tg3_start_xmit_dma_bug(). This is prep work for the following patch. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07tg3: Fix phylib locking strategyMatt Carlson1-1/+0
Felix Radensky noted that chip resets were generating stack trace dumps. This is because the driver is attempting to acquire the mdio bus mutex while holding the tp->lock spinlock. The fix is to change the code such that every phy access takes the tp->lock spinlock instead. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-01tg3: Remove prev_vlan_tag from struct tx_ring_infoEric Dumazet1-1/+0
prev_vlan_tag field is not used. Patch saves 512*8 bytes per tx queue ring on 64bit arches. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Matthew Carlson <mcarlson@broadcom.com>
2009-09-02tg3: Add MDIO bus address assignmentsMatt Carlson1-0/+3
The 5717 is a dual port chip that has a shared MDIO bus design. While it is impossible for one function to interface with the wrong phy, that function still needs to know which MDIO bus address to use when interfacing with its own phy. This patch adds code to determine which MDIO bus address to use. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02tg3: Add 5717 NVRAM detection routinesMatt Carlson1-1/+22
This patch adds NVRAM detection routines for the 5717. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02tg3: Add 5717 asic revMatt Carlson1-7/+18
This patch adds the 5717 asic rev. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02tg3: Assign rx ret producer indexes by vectorMatt Carlson1-0/+1
When RSS is enabled, the status block format changes slightly. The "rx_jumbo_consumer", "reserved", and "rx_mini_consumer" members get mapped to the other three rx return ring producer indexes. This patch introduces a new per-interrupt member which identifies which location in the status block a particular vector should look for return ring updates. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02tg3: Add RSS supportMatt Carlson1-1/+24
This patch adds code needed to enable RSS. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02tg3: Add coalesce parameters for msix vectorsMatt Carlson1-1/+9
This patch adds code to tune the coalescing parameters for the other msix vectors. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02tg3: Add TSS supportMatt Carlson1-0/+1
This patch exposes the additional transmit rings to the kernel and makes the necessary modifications to transmit, open, and close paths. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02tg3: Add tx and rx ring resource trackingMatt Carlson1-1/+2
This patch adds code to assign status block, tx producer ring and rx return ring resources needed for the other interrupt vectors. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02tg3: Add MSI-X supportMatt Carlson1-0/+6
This patch adds MSI-X support. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.