aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/usb/cdc_ncm.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2012-10-23net: cdc_ncm: workaround NTB input size firmware bugBjørn Mork1-33/+13
Some devices do not support the 8 byte variants of the NTB input size control messages despite announcing such support in their NCM or MBIM functional descriptor. According to the NCM specification, all devices must support the 4 byte variant regardless of whether or not the flag is set: If bit D5 is set in the bmNetworkCapabilities field of function’s NCM Functional Descriptor, the host may set wLength either to 4 or to 8. If wLength is 4, the function shall assume that wNtbInMaxDatagrams is to be set to zero. If wLength is 8, then the function shall use the provided value as the limit. The function shall return an error response (a STALL PID) if wLength is set to any other value. We do not set wNtbInMaxDatagrams in any case, so we can just as well unconditionally use the 4 byte variant without losing any functionality. This works around the known firmware bug, and simplifies the code considerably. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-03cdc-ncm: tag Ericsson WWAN devices (eg F5521gw) with FLAG_WWANPeter Meiser1-0/+20
Hello, looking at http://sourceforge.net/apps/mediawiki/mbm/index.php?title=Main_Page#Supported_devices, there are branded Ericsson devices from Dell and Toshiba. The to-be-added vendor IDs are 0x413c for Dell and 0x0930 for Toshiba. Please find attached a patch to add these vendor IDs. Signed-off-by: Peter Meiser <meiser@gmx-topmail.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-24cdc-ncm: tag Ericsson WWAN devices (eg F5521gw) with FLAG_WWANDan Williams1-23/+45
Tag Ericsson NCM devices as WWAN modems, since they almost certainly all are. This way userspace clients know that the device requires further setup on the AT-capable serial ports before connectivity is available. Signed-off-by: Dan Williams <dcbw@redhat.com>
2012-05-18USB: Disable hub-initiated LPM for comms devices.Sarah Sharp1-0/+1
Hub-initiated LPM is not good for USB communications devices. Comms devices should be able to tell when their link can go into a lower power state, because they know when an incoming transmission is finished. Ideally, these devices would slam their links into a lower power state, using the device-initiated LPM, after finishing the last packet of their data transfer. If we enable the idle timeouts for the parent hubs to enable hub-initiated LPM, we will get a lot of useless LPM packets on the bus as the devices reject LPM transitions when they're in the middle of receiving data. Worse, some devices might blindly accept the hub-initiated LPM and power down their radios while they're in the middle of receiving a transmission. The Intel Windows folks are disabling hub-initiated LPM for all USB communications devices under a xHCI USB 3.0 host. In order to keep the Linux behavior as close as possible to Windows, we need to do the same in Linux. Set the disable_hub_initiated_lpm flag for for all USB communications drivers. I know there aren't currently any USB 3.0 devices that implement these class specifications, but we should be ready if they do. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Hansjoerg Lipp <hjlipp@web.de> Cc: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Jan Dumon <j.dumon@option.com> Cc: Petko Manolov <petkan@users.sourceforge.net> Cc: Steve Glendinning <steve.glendinning@smsc.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com> Cc: Jouni Malinen <jouni@qca.qualcomm.com> Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Cc: Brett Rudley <brudley@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: "Franky (Zhenhui) Lin" <frankyl@broadcom.com> Cc: Kan Yan <kanyan@broadcom.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: Herton Ronaldo Krzesinski <herton@canonical.com> Cc: Hin-Tak Leung <htl10@users.sourceforge.net> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Chaoming Li <chaoming_li@realsil.com.cn> Cc: Daniel Drake <dsd@gentoo.org> Cc: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-03-16cdc_ncm: avoid discarding datagrams in rx pathAlexey Orishko1-55/+47
Changes: - removed a limit for amount of datagrams for IN NTB - using pointer to traverse NTB in rx_fixup() - renamed "temp" to "len" in rx_fixup() - do NTB sequence number check in rx path Tested on Intel/ARM. Reviewed-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Tested-by: Dmitry Tarnyagin <Dmitry.Tarnyagin@stericsson.com> Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-16cdc_ncm: fix MTU and max_datagram_size handlingAlexey Orishko1-18/+16
Changes/fixes: - inform device if max_datagram_size was changed by host - max_datagram_size can't be bigger MTU in ETH func descr - fix constants definitions to enable running CAIF service over NCM Tested on Intel/ARM. Reviewed-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Tested-by: Dmitry Tarnyagin <Dmitry.Tarnyagin@stericsson.com> Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-16cdc_ncm: reduce driver latency in the data pathAlexey Orishko1-43/+51
Changes: - use high resolution timer latency became approx. 10-15 times less than before - use taklet for sending remaining data in tx path Tested on Intel/ARM. Reviewed-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Tested-by: Dmitry Tarnyagin <Dmitry.Tarnyagin@stericsson.com> Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24usb/cdc_ncm: print MAC via printk format specifierDanny Kukawka1-5/+1
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-2/+2
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: igmp: Avoid zero delay when receiving odd mixture of IGMP queries netdev: make net_device_ops const bcm63xx: make ethtool_ops const usbnet: make ethtool_ops const net: Fix build with INET disabled. net: introduce netif_addr_lock_nested() and call if when appropriate net: correct lock name in dev_[uc/mc]_sync documentations. net: sk_update_clone is only used in net/core/sock.c 8139cp: fix missing napi_gro_flush. pktgen: set correct max and min in pktgen_setup_inject() smsc911x: Unconditionally include linux/smscphy.h in smsc911x.h asix: fix infinite loop in rx_fixup() net: Default UDP and UNIX diag to 'n'. r6040: fix typo in use of MCR0 register bits net: fix sock_clone reference mismatch with tcp memcontrol
2012-01-09usbnet: make ethtool_ops conststephen hemminger1-2/+2
The ethtool_ops table of function pointers should be const. Fix all the usb network drivers. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-07Merge branch 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds1-14/+1
* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (73 commits) arm: fix up some samsung merge sysdev conversion problems firmware: Fix an oops on reading fw_priv->fw in sysfs loading file Drivers:hv: Fix a bug in vmbus_driver_unregister() driver core: remove __must_check from device_create_file debugfs: add missing #ifdef HAS_IOMEM arm: time.h: remove device.h #include driver-core: remove sysdev.h usage. clockevents: remove sysdev.h arm: convert sysdev_class to a regular subsystem arm: leds: convert sysdev_class to a regular subsystem kobject: remove kset_find_obj_hinted() m86k: gpio - convert sysdev_class to a regular subsystem mips: txx9_sram - convert sysdev_class to a regular subsystem mips: 7segled - convert sysdev_class to a regular subsystem sh: dma - convert sysdev_class to a regular subsystem sh: intc - convert sysdev_class to a regular subsystem power: suspend - convert sysdev_class to a regular subsystem power: qe_ic - convert sysdev_class to a regular subsystem power: cmm - convert sysdev_class to a regular subsystem s390: time - convert sysdev_class to a regular subsystem ... Fix up conflicts with 'struct sysdev' removal from various platform drivers that got changed: - arch/arm/mach-exynos/cpu.c - arch/arm/mach-exynos/irq-eint.c - arch/arm/mach-s3c64xx/common.c - arch/arm/mach-s3c64xx/cpu.c - arch/arm/mach-s5p64x0/cpu.c - arch/arm/mach-s5pv210/common.c - arch/arm/plat-samsung/include/plat/cpu.h - arch/powerpc/kernel/sysfs.c and fix up cpu_is_hotpluggable() as per Greg in include/linux/cpu.h
2011-11-22CDC NCM: Use kzalloc rather than kmalloc followed by memset with 0Thomas Meyer1-3/+1
This considers some simple cases that are common and easy to validate Note in particular that there are no ...s in the rule, so all of the matched code has to be contiguous The semantic patch that makes this change is available in scripts/coccinelle/api/alloc/kzalloc-simple.cocci. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-18USB: convert drivers/net/* to use module_usb_driver()Greg Kroah-Hartman1-14/+1
This converts the drivers in drivers/net/* to use the module_usb_driver() macro which makes the code smaller and a bit simpler. Added bonus is that it removes some unneeded kernel log messages about drivers loading and/or unloading. Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Oliver Neukum <oliver@neukum.name> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Petko Manolov <petkan@users.sourceforge.net> Cc: Steve Glendinning <steve.glendinning@smsc.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: Herton Ronaldo Krzesinski <herton@canonical.com> Cc: Hin-Tak Leung <htl10@users.sourceforge.net> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Chaoming Li <chaoming_li@realsil.com.cn> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: "David S. Miller" <davem@davemloft.net> Cc: Roel Kluin <roel.kluin@gmail.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Jiri Pirko <jpirko@redhat.com> Cc: Pavel Roskin <proski@gnu.org> Cc: Yoann DI-RUZZA <y.diruzza@lim.eu> Cc: George <george0505@realtek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-13usbnet/cdc_ncm: Don't use stack variables for DMAJosh Boyer1-9/+38
The cdc_ncm driver still has a few places where stack variables are passed to the cdc_ncm_do_request function. This triggers a stack trace in lib/dma-debug.c if the CONFIG_DEBUG_DMA_API option is set. Adjust these calls to pass parameters that have been allocated with kzalloc. Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-04cdc_ncm: fix endianness problem.Giuseppe Scrivano1-100/+56
Fix a misusage of the struct usb_cdc_notification to pass arguments to the usb_control_msg function. The usb_control_msg function expects host endian arguments but usb_cdc_notification stores these values as little endian. Now usb_control_msg is directly invoked with host endian values. Signed-off-by: Giuseppe Scrivano <giuseppe@southpole.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-24net: Remove unneeded version.h includes from drivers/net/Jesper Juhl1-1/+0
It was pointed out by 'make versioncheck' that some includes of linux/version.h are not needed in drivers/net/. This patch removes them. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-01usbnet/cdc_ncm: add missing .reset_resume hookStefan Metzmacher1-1/+2
This avoids messages like this after suspend: cdc_ncm 2-1.4:1.6: no reset_resume for driver cdc_ncm? cdc_ncm 2-1.4:1.7: no reset_resume for driver cdc_ncm? cdc_ncm 2-1.4:1.6: usb0: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, CDC NCM This is important for the Ericsson F5521gw GSM/UMTS modem. Otherwise modemmanager looses the fact that the cdc_ncm and cdc_acm devices belong together. The cdc_ether module does the same. Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-24CDC NCM: release interfaces fix in unbind()Alexey Orishko1-48/+25
Changes: - claim slave/data interface during bind() and release interfaces in unbind() unconditionally - in case of error during bind(), release claimed data interface in the same function - remove obsolited "*_claimed" entries from driver context Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-12CDC NCM: Add mising short packet in cdc_ncm driverAlexey Orishko1-5/+8
Changes: - while making NTB, driver shall check if device dwNtbOutMaxSize is higher than host value and shall add a short packet if this is the case - previous temporary patch for this issue is replaced by this one Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-24cdc_ncm: fix short packet issue on some devicesHans Petter Selasky1-2/+2
The default maximum transmit length for NCM USB frames should be so that a short packet happens at the end if the device supports a length greater than the defined maximum. This is achieved by adding 4 bytes to the maximum length so that the existing logic can fit a short packet there. Signed-off-by: Hans Petter Selasky <hselasky@c2i.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-01usbnet: use eth%d name for known ethernet devicesArnd Bergmann1-1/+1
The documentation for the USB ethernet devices suggests that only some devices are supposed to use usb0 as the network interface name instead of eth0. The logic used there, and documented in Kconfig for CDC is that eth0 will be used when the mac address is a globally assigned one, but usb0 is used for the locally managed range that is typically used on point-to-point links. Unfortunately, this has caused a lot of pain on the smsc95xx device that is used on the popular pandaboard without an EEPROM to store the MAC address, which causes the driver to call random_ether_address(). Obviously, there should be a proper MAC addressed assigned to the device, and discussions are ongoing about how to solve this, but this patch at least makes sure that the default interface naming gets a little saner and matches what the user can expect based on the documentation, including for new devices. The approach taken here is to flag whether a device might be a point-to-point link with the new FLAG_POINTTOPOINT setting in the usbnet driver_info. A driver can set both FLAG_POINTTOPOINT and FLAG_ETHER if it is not sure (e.g. cdc_ether), or just one of the two. The usbnet framework only looks at the MAC address for device naming if both flags are set, otherwise it trusts the flag. Signed-off-by: Arnd Bergmann <arnd.bergmann@linaro.org> Tested-by: Andy Green <andy.green@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-08USB CDC NCM errata updates for cdc_ncm host driverAlexey Orishko1-80/+147
Specification links: - CDC NCM errata link: http://www.usb.org/developers/devclass_docs/NCM10_012011.zip - CDC and WMC errata link: http://www.usb.org/developers/devclass_docs/CDC1.2_WMC1.1_012011.zip Changes: - driver updated to match cdc.h header with errata changes - added support for USB_CDC_SET_NTB_INPUT_SIZE control request with 8 byte length - fixes to comply with specification: send only control requests supported by device, set number of datagrams for IN direction, connection speed structure update, etc. - packet loss fixed for tx direction; misleading flag renamed. - adjusted hard_mtu value. Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18USB CDC NCM: tx_fixup() race condition fixAlexey Orishko1-7/+12
- tx_fixup() can be called from either timer callback or from xmit() in usbnet, so spinlock is added to avoid concurrency-related problem. - minor correction due to checkpatch warning for some line over 80 chars after previous patch was applied. Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-13USB CDC NCM: Don't deref NULL in cdc_ncm_rx_fixup() and don't use uninitialized variable.Jesper Juhl1-1/+3
skb_clone() dynamically allocates memory and may fail. If it does it returns NULL. This means we'll dereference a NULL pointer in drivers/net/usb/cdc_ncm.c::cdc_ncm_rx_fixup(). As far as I can tell, the proper way to deal with this is simply to goto the error label. Furthermore gcc complains that 'skb' may be used uninitialized: drivers/net/usb/cdc_ncm.c: In function ‘cdc_ncm_rx_fixup’: drivers/net/usb/cdc_ncm.c:922:18: warning: ‘skb’ may be used uninitialized in this function and I believe it is right. On the line where we pr_debug("invalid frame detected (ignored)" ... we are using the local variable 'skb' but nothing has ever been assigned to that variable yet. I believe the correct fix for that is to use 'skb_in' instead. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-06USB CDC NCM host driverAlexey Orishko1-0/+1213
The patch provides USB CDC NCM host driver support in the Linux Kernel. Changes: drivers/net/usb/cdc_ncm.c: - initial submission of the CDC NCM host driver; - verified on Intel 32/64 bit, Intel Atom, ST-Ericsson U8500 (ARM) - throughput measured over 100 Mbits duplex; - driver supports 16-bit NTB format only, but it is more than enough for transfers up to 64K; - driver can handle up to 32 datagrams in received NTB; - timer is used to collect several packets in Tx direction drivers/net/usb/Kconfig: - a new entry to compile CDC NCM host driver drivers/net/usb/Makefile: - a new entry to compile CDC NCM host driver Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.