aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/usb/lan78xx.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-08-25lan78xx: Limit number of driver warning messagesJohn Efstathiades1-2/+3
Device removal can result in a large burst of driver warning messages (20 - 30) sent to the kernel log. Most of these are register read/write failures. This change limits the rate at which these messages are emitted. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Fix race condition in disconnect handlingJohn Efstathiades1-9/+57
If there is a device disconnect at roughly the same time as a deferred PHY link reset there is a race condition that can result in a kernel lock up due to a null pointer dereference in the driver's deferred work handling routine lan78xx_delayedwork(). The following changes fix this problem. Add new status flag EVENT_DEV_DISCONNECT to indicate when the device has been removed and use it to prevent operations, such as register access, that will fail once the device is removed. Stop processing of deferred work items when the driver's USB disconnect handler is invoked. Disconnect the PHY only after the network device has been unregistered and all delayed work has been cancelled. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Fix race conditions in suspend/resume handlingJohn Efstathiades1-135/+284
If the interface is given an IP address while the device is suspended (as a result of an auto-suspend event) there is a race between lan78xx_resume() and lan78xx_open() that can result in an exception or failure to handle incoming packets. The following changes fix this problem. Introduce a mutex to serialise operations in the network interface open and stop entry points with respect to the USB driver suspend and resume entry points. Move Tx and Rx data path start/stop to lan78xx_start() and lan78xx_stop() respectively and flush the packet FIFOs before starting the Tx and Rx data paths. This prevents the MAC and FIFOs getting out of step and delivery of malformed packets to the network stack. Stop processing of received packets before disconnecting the PHY from the MAC to prevent a kernel exception caused by handling packets after the PHY device has been removed. Refactor device auto-suspend code to make it consistent with the the system suspend code and make the suspend handler easier to read. Add new code to stop wake-on-lan packets or PHY events resuming the host or device from suspend if the device has not been opened (typically after an IP address is assigned). This patch is dependent on changes to lan78xx_suspend() and lan78xx_resume() introduced in the previous patch of this patch set. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Fix partial packet errors on suspend/resumeJohn Efstathiades1-106/+197
The MAC can get out of step with the internal packet FIFOs if the system goes to sleep when the link is active, especially at high data rates. This can result in partial frames in the packet FIFOs that in result in malformed frames being delivered to the host. This occurs because the driver does not enable/disable the internal packet FIFOs in step with the corresponding MAC data path. The following changes fix this problem. Update code that enables/disables the MAC receiver and transmitter to the more general Rx and Tx data path, where the data path in each direction consists of both the MAC function (Tx or Rx) and the corresponding packet FIFO. In the receive path the packet FIFO must be enabled before the MAC receiver but disabled after the MAC receiver. In the transmit path the opposite is true: the packet FIFO must be enabled after the MAC transmitter but disabled before the MAC transmitter. The packet FIFOs can be flushed safely once the corresponding data path is stopped. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Fix exception on link speed changeJohn Efstathiades1-6/+48
An exception is sometimes seen when the link speed is changed from auto-negotiation to a fixed speed, or vice versa. The exception occurs when the MAC is reset (due to the link speed change) at the same time as the PHY state machine is accessing a PHY register. The following changes fix this problem. Rework the MAC reset to ensure there is no outstanding MDIO register transaction before the reset and then wait until the reset is complete before allowing any further MAC register access. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Add missing return code checksJohn Efstathiades1-66/+333
There are many places in the driver where the return code from a function call is captured but without a subsequent test of the return code and appropriate action taken. This patch adds the missing return code tests and action. In most cases the action is an early exit from the calling function. The function lan78xx_set_suspend() was also updated to make it consistent with lan78xx_suspend(). Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Remove unused pause frame queueJohn Efstathiades1-9/+0
Remove the pause frame queue from the driver. It is initialised but not actually used. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Set flow control threshold to prevent packet lossJohn Efstathiades1-2/+15
Set threshold at which flow control is triggered to 3/4 full of the internal Rx packet FIFO to prevent packet drops at high data rates. The new setting reduces the number of dropped UDP frames and TCP retransmit requests especially on less capable CPUs. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Remove unused timerJohn Efstathiades1-3/+1
Remove kernel timer that is not used by the driver. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25lan78xx: Fix white space and style issuesJohn Efstathiades1-38/+42
Fix white space and code style issues identified by checkpatch. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-4/+12
Build failure in drivers/net/wwan/mhi_wwan_mbim.c: add missing parameter (0, assuming we don't want buffer pre-alloc). Conflict in drivers/net/dsa/sja1105/sja1105_main.c between: 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") 0fac6aa098ed ("net: dsa: sja1105: delete the best_effort_vlan_filtering mode") Follow the instructions from the commit message of the former commit - removed the if conditions. When looking at commit 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") note that the mask_iotag fields get removed by the following patch. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-04net: usb: lan78xx: don't modify phy_device state concurrentlyIvan T. Ivanov1-4/+12
Currently phy_device state could be left in inconsistent state shown by following alert message[1]. This is because phy_read_status could be called concurrently from lan78xx_delayedwork, phy_state_machine and __ethtool_get_link. Fix this by making sure that phy_device state is updated atomically. [1] lan78xx 1-1.1.1:1.0 eth0: No phy led trigger registered for speed(-1) Signed-off-by: Ivan T. Ivanov <iivanov@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann1-1/+1
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-01net: usb: Fix spelling mistakesZheng Yongjun1-1/+1
wierdness ==> weirdness multicat ==> multicast limite ==> limit adddress ==> address operater ==> operator intial ==> initial smaler ==> smaller Communcation ==> Communication funcitons ==> functions everytime ==> every time Neigbor ==> Neighbor performace ==> performance Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-18net: lan78xx: advertise tx software timestamping supportMarkus Bloechl1-0/+1
lan78xx already calls skb_tx_timestamp() in its lan78xx_start_xmit(). Override .get_ts_info to also advertise this capability (SOF_TIMESTAMPING_TX_SOFTWARE) via ethtool. Signed-off-by: Markus Blöchl <markus.bloechl@ipetronik.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25net: usb: lan78xx: remove unused including <linux/version.h>Zheng Yongjun1-1/+0
Remove including <linux/version.h> that don't need it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Acked-by: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-02net: usb: lan78xx: use new tasklet APIEmil Renner Berthing1-3/+3
This converts the driver to use the new tasklet API introduced in commit 12cc923f1ccc ("tasklet: Introduce new initialization API") Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-03net: usb: lan78xx: Remove lots of set but unused 'ret' variablesLee Jones1-90/+78
Fixes the following W=1 kernel build warning(s): drivers/net/usb/lan78xx.c: In function ‘lan78xx_read_raw_otp’: drivers/net/usb/lan78xx.c:825:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] drivers/net/usb/lan78xx.c: In function ‘lan78xx_write_raw_otp’: drivers/net/usb/lan78xx.c:879:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] drivers/net/usb/lan78xx.c: In function ‘lan78xx_deferred_multicast_write’: drivers/net/usb/lan78xx.c:1041:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] drivers/net/usb/lan78xx.c: In function ‘lan78xx_update_flowcontrol’: drivers/net/usb/lan78xx.c:1127:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] drivers/net/usb/lan78xx.c: In function ‘lan78xx_init_mac_address’: drivers/net/usb/lan78xx.c:1666:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] drivers/net/usb/lan78xx.c: In function ‘lan78xx_link_status_change’: drivers/net/usb/lan78xx.c:1841:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] drivers/net/usb/lan78xx.c: In function ‘lan78xx_irq_bus_sync_unlock’: drivers/net/usb/lan78xx.c:1920:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] drivers/net/usb/lan78xx.c: In function ‘lan8835_fixup’: drivers/net/usb/lan78xx.c:1994:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] drivers/net/usb/lan78xx.c: In function ‘lan78xx_set_rx_max_frame_length’: drivers/net/usb/lan78xx.c:2192:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] drivers/net/usb/lan78xx.c: In function ‘lan78xx_change_mtu’: drivers/net/usb/lan78xx.c:2270:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] drivers/net/usb/lan78xx.c: In function ‘lan78xx_set_mac_addr’: drivers/net/usb/lan78xx.c:2299:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] drivers/net/usb/lan78xx.c: In function ‘lan78xx_set_features’: drivers/net/usb/lan78xx.c:2333:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] drivers/net/usb/lan78xx.c: In function ‘lan78xx_set_suspend’: drivers/net/usb/lan78xx.c:3807:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201102114512.1062724-25-lee.jones@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-28net: lan78xx: replace bogus endpoint lookupJohan Hovold1-87/+30
Drop the bogus endpoint-lookup helper which could end up accepting interfaces based on endpoints belonging to unrelated altsettings. Note that the returned bulk pipes and interrupt endpoint descriptor were never actually used. Instead the bulk-endpoint numbers are hardcoded to 1 and 2 (matching the specification), while the interrupt- endpoint descriptor was assumed to be the third descriptor created by USB core. Try to bring some order to this by dropping the bogus lookup helper and adding the missing endpoint sanity checks while keeping the interrupt- descriptor assumption for now. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28net: lan78xx: fix transfer-buffer memory leakJohan Hovold1-0/+1
The interrupt URB transfer-buffer was never freed on disconnect or after probe errors. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28net: lan78xx: add missing endpoint sanity checkJohan Hovold1-0/+5
Add the missing endpoint sanity check to prevent a NULL-pointer dereference should a malicious device lack the expected endpoints. Note that the driver has a broken endpoint-lookup helper, lan78xx_get_endpoints(), which can end up accepting interfaces in an altsetting without endpoints as long as *some* altsetting has a bulk-in and a bulk-out endpoint. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-0/+15
Minor conflict in mlx5 because changes happened to code that has moved meanwhile. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23net: convert suitable drivers to use phy_do_ioctl_runningHeiner Kallweit1-9/+1
Convert suitable drivers to use new helper phy_do_ioctl_running. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Timur Tabi <timur@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: usb: lan78xx: Add .ndo_features_checkJames Hughes1-0/+15
As reported by Eric Dumazet, there are still some outstanding cases where the driver does not handle TSO correctly when skb's are over a certain size. Most cases have been fixed, this patch should ensure that forwarded SKB's that are greater than MAX_SINGLE_PACKET_SIZE - TX_OVERHEAD are software segmented and handled correctly. Signed-off-by: James Hughes <james.hughes@raspberrypi.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-0/+1
2020-01-14net: usb: lan78xx: limit size of local TSO packetsEric Dumazet1-0/+1
lan78xx_tx_bh() makes sure to not exceed MAX_SINGLE_PACKET_SIZE bytes in the aggregated packets it builds, but does nothing to prevent large GSO packets being submitted. Pierre-Francois reported various hangs when/if TSO is enabled. For localy generated packets, we can use netif_set_gso_max_size() to limit the size of TSO packets. Note that forwarded packets could still hit the issue, so a complete fix might require implementing .ndo_features_check for this driver, forcing a software segmentation if the size of the TSO packet exceeds MAX_SINGLE_PACKET_SIZE. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: RENARD Pierre-Francois <pfrenard@gmail.com> Tested-by: RENARD Pierre-Francois <pfrenard@gmail.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-6/+3
The ungrafting from PRIO bug fixes in net, when merged into net-next, merge cleanly but create a build failure. The resolution used here is from Petr Machata. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-07net: usb: lan78xx: fix possible skb leakEric Dumazet1-6/+3
If skb_linearize() fails, we need to free the skb. TSO makes skb bigger, and this bug might be the reason Raspberry Pi 3B+ users had to disable TSO. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: RENARD Pierre-Francois <pfrenard@gmail.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+2
Mere overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15net: usb: lan78xx: Fix error message format specifierCristian Birsan1-1/+1
Display the return code as decimal integer. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-12-12netdev: pass the stuck queue to the timeout handlerMichael S. Tsirkin1-1/+1
This allows incrementing the correct timeout statistic without any mess. Down the road, devices can learn to reset just the specific queue. The patch was generated with the following script: use strict; use warnings; our $^I = '.bak'; my @work = ( ["arch/m68k/emu/nfeth.c", "nfeth_tx_timeout"], ["arch/um/drivers/net_kern.c", "uml_net_tx_timeout"], ["arch/um/drivers/vector_kern.c", "vector_net_tx_timeout"], ["arch/xtensa/platforms/iss/network.c", "iss_net_tx_timeout"], ["drivers/char/pcmcia/synclink_cs.c", "hdlcdev_tx_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/message/fusion/mptlan.c", "mpt_lan_tx_timeout"], ["drivers/misc/sgi-xp/xpnet.c", "xpnet_dev_tx_timeout"], ["drivers/net/appletalk/cops.c", "cops_timeout"], ["drivers/net/arcnet/arcdevice.h", "arcnet_timeout"], ["drivers/net/arcnet/arcnet.c", "arcnet_timeout"], ["drivers/net/arcnet/com20020.c", "arcnet_timeout"], ["drivers/net/ethernet/3com/3c509.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c515.c", "corkscrew_timeout"], ["drivers/net/ethernet/3com/3c574_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c589_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/typhoon.c", "typhoon_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "eip_tx_timeout"], ["drivers/net/ethernet/8390/8390.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390p.c", "eip_tx_timeout"], ["drivers/net/ethernet/8390/ax88796.c", "ax_ei_tx_timeout"], ["drivers/net/ethernet/8390/axnet_cs.c", "axnet_tx_timeout"], ["drivers/net/ethernet/8390/etherh.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/hydra.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mac8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mcf8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/lib8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/ne2k-pci.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/pcnet_cs.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/smc-ultra.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/wd.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/zorro8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/adaptec/starfire.c", "tx_timeout"], ["drivers/net/ethernet/agere/et131x.c", "et131x_tx_timeout"], ["drivers/net/ethernet/allwinner/sun4i-emac.c", "emac_timeout"], ["drivers/net/ethernet/alteon/acenic.c", "ace_watchdog"], ["drivers/net/ethernet/amazon/ena/ena_netdev.c", "ena_tx_timeout"], ["drivers/net/ethernet/amd/7990.h", "lance_tx_timeout"], ["drivers/net/ethernet/amd/7990.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/a2065.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/am79c961a.c", "am79c961_timeout"], ["drivers/net/ethernet/amd/amd8111e.c", "amd8111e_tx_timeout"], ["drivers/net/ethernet/amd/ariadne.c", "ariadne_tx_timeout"], ["drivers/net/ethernet/amd/atarilance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/au1000_eth.c", "au1000_tx_timeout"], ["drivers/net/ethernet/amd/declance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/lance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/mvme147.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/ni65.c", "ni65_timeout"], ["drivers/net/ethernet/amd/nmclan_cs.c", "mace_tx_timeout"], ["drivers/net/ethernet/amd/pcnet32.c", "pcnet32_tx_timeout"], ["drivers/net/ethernet/amd/sunlance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/xgbe/xgbe-drv.c", "xgbe_tx_timeout"], ["drivers/net/ethernet/apm/xgene-v2/main.c", "xge_timeout"], ["drivers/net/ethernet/apm/xgene/xgene_enet_main.c", "xgene_enet_timeout"], ["drivers/net/ethernet/apple/macmace.c", "mace_tx_timeout"], ["drivers/net/ethernet/atheros/ag71xx.c", "ag71xx_tx_timeout"], ["drivers/net/ethernet/atheros/alx/main.c", "alx_tx_timeout"], ["drivers/net/ethernet/atheros/atl1c/atl1c_main.c", "atl1c_tx_timeout"], ["drivers/net/ethernet/atheros/atl1e/atl1e_main.c", "atl1e_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl1.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl2.c", "atl2_tx_timeout"], ["drivers/net/ethernet/broadcom/b44.c", "b44_tx_timeout"], ["drivers/net/ethernet/broadcom/bcmsysport.c", "bcm_sysport_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2.c", "bnx2_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnxt/bnxt.c", "bnxt_tx_timeout"], ["drivers/net/ethernet/broadcom/genet/bcmgenet.c", "bcmgenet_timeout"], ["drivers/net/ethernet/broadcom/sb1250-mac.c", "sbmac_tx_timeout"], ["drivers/net/ethernet/broadcom/tg3.c", "tg3_tx_timeout"], ["drivers/net/ethernet/calxeda/xgmac.c", "xgmac_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c", "lio_vf_rep_tx_timeout"], ["drivers/net/ethernet/cavium/thunder/nicvf_main.c", "nicvf_tx_timeout"], ["drivers/net/ethernet/cirrus/cs89x0.c", "net_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cortina/gemini.c", "gmac_tx_timeout"], ["drivers/net/ethernet/davicom/dm9000.c", "dm9000_timeout"], ["drivers/net/ethernet/dec/tulip/de2104x.c", "de_tx_timeout"], ["drivers/net/ethernet/dec/tulip/tulip_core.c", "tulip_tx_timeout"], ["drivers/net/ethernet/dec/tulip/winbond-840.c", "tx_timeout"], ["drivers/net/ethernet/dlink/dl2k.c", "rio_tx_timeout"], ["drivers/net/ethernet/dlink/sundance.c", "tx_timeout"], ["drivers/net/ethernet/emulex/benet/be_main.c", "be_tx_timeout"], ["drivers/net/ethernet/ethoc.c", "ethoc_tx_timeout"], ["drivers/net/ethernet/faraday/ftgmac100.c", "ftgmac100_tx_timeout"], ["drivers/net/ethernet/fealnx.c", "fealnx_tx_timeout"], ["drivers/net/ethernet/freescale/dpaa/dpaa_eth.c", "dpaa_tx_timeout"], ["drivers/net/ethernet/freescale/fec_main.c", "fec_timeout"], ["drivers/net/ethernet/freescale/fec_mpc52xx.c", "mpc52xx_fec_tx_timeout"], ["drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c", "fs_timeout"], ["drivers/net/ethernet/freescale/gianfar.c", "gfar_timeout"], ["drivers/net/ethernet/freescale/ucc_geth.c", "ucc_geth_timeout"], ["drivers/net/ethernet/fujitsu/fmvj18x_cs.c", "fjn_tx_timeout"], ["drivers/net/ethernet/google/gve/gve_main.c", "gve_tx_timeout"], ["drivers/net/ethernet/hisilicon/hip04_eth.c", "hip04_timeout"], ["drivers/net/ethernet/hisilicon/hix5hd2_gmac.c", "hix5hd2_net_timeout"], ["drivers/net/ethernet/hisilicon/hns/hns_enet.c", "hns_nic_net_timeout"], ["drivers/net/ethernet/hisilicon/hns3/hns3_enet.c", "hns3_nic_net_timeout"], ["drivers/net/ethernet/huawei/hinic/hinic_main.c", "hinic_tx_timeout"], ["drivers/net/ethernet/i825xx/82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/ether1.c", "ether1_timeout"], ["drivers/net/ethernet/i825xx/lib82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/sun3_82586.c", "sun3_82586_timeout"], ["drivers/net/ethernet/ibm/ehea/ehea_main.c", "ehea_tx_watchdog"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/ibmvnic.c", "ibmvnic_tx_timeout"], ["drivers/net/ethernet/intel/e100.c", "e100_tx_timeout"], ["drivers/net/ethernet/intel/e1000/e1000_main.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/e1000e/netdev.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/fm10k/fm10k_netdev.c", "fm10k_tx_timeout"], ["drivers/net/ethernet/intel/i40e/i40e_main.c", "i40e_tx_timeout"], ["drivers/net/ethernet/intel/iavf/iavf_main.c", "iavf_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/igb/igb_main.c", "igb_tx_timeout"], ["drivers/net/ethernet/intel/igbvf/netdev.c", "igbvf_tx_timeout"], ["drivers/net/ethernet/intel/ixgb/ixgb_main.c", "ixgb_tx_timeout"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c", "adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev);"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_main.c", "ixgbe_tx_timeout"], ["drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c", "ixgbevf_tx_timeout"], ["drivers/net/ethernet/jme.c", "jme_tx_timeout"], ["drivers/net/ethernet/korina.c", "korina_tx_timeout"], ["drivers/net/ethernet/lantiq_etop.c", "ltq_etop_tx_timeout"], ["drivers/net/ethernet/marvell/mv643xx_eth.c", "mv643xx_eth_tx_timeout"], ["drivers/net/ethernet/marvell/pxa168_eth.c", "pxa168_eth_tx_timeout"], ["drivers/net/ethernet/marvell/skge.c", "skge_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/mediatek/mtk_eth_soc.c", "mtk_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx5/core/en_main.c", "mlx5e_tx_timeout"], ["drivers/net/ethernet/micrel/ks8842.c", "ks8842_tx_timeout"], ["drivers/net/ethernet/micrel/ksz884x.c", "netdev_tx_timeout"], ["drivers/net/ethernet/microchip/enc28j60.c", "enc28j60_tx_timeout"], ["drivers/net/ethernet/microchip/encx24j600.c", "encx24j600_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.h", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/jazzsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/macsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/natsemi.c", "ns_tx_timeout"], ["drivers/net/ethernet/natsemi/ns83820.c", "ns83820_tx_timeout"], ["drivers/net/ethernet/natsemi/xtsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/neterion/s2io.h", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/s2io.c", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/vxge/vxge-main.c", "vxge_tx_watchdog"], ["drivers/net/ethernet/netronome/nfp/nfp_net_common.c", "nfp_net_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c", "pch_gbe_tx_timeout"], ["drivers/net/ethernet/packetengines/hamachi.c", "hamachi_tx_timeout"], ["drivers/net/ethernet/packetengines/yellowfin.c", "yellowfin_tx_timeout"], ["drivers/net/ethernet/pensando/ionic/ionic_lif.c", "ionic_tx_timeout"], ["drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c", "netxen_tx_timeout"], ["drivers/net/ethernet/qlogic/qla3xxx.c", "ql3xxx_tx_timeout"], ["drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c", "qlcnic_tx_timeout"], ["drivers/net/ethernet/qualcomm/emac/emac.c", "emac_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_spi.c", "qcaspi_netdev_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_uart.c", "qcauart_netdev_tx_timeout"], ["drivers/net/ethernet/rdc/r6040.c", "r6040_tx_timeout"], ["drivers/net/ethernet/realtek/8139cp.c", "cp_tx_timeout"], ["drivers/net/ethernet/realtek/8139too.c", "rtl8139_tx_timeout"], ["drivers/net/ethernet/realtek/atp.c", "tx_timeout"], ["drivers/net/ethernet/realtek/r8169_main.c", "rtl8169_tx_timeout"], ["drivers/net/ethernet/renesas/ravb_main.c", "ravb_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c", "sxgbe_tx_timeout"], ["drivers/net/ethernet/seeq/ether3.c", "ether3_timeout"], ["drivers/net/ethernet/seeq/sgiseeq.c", "timeout"], ["drivers/net/ethernet/sfc/efx.c", "efx_watchdog"], ["drivers/net/ethernet/sfc/falcon/efx.c", "ef4_watchdog"], ["drivers/net/ethernet/sgi/ioc3-eth.c", "ioc3_timeout"], ["drivers/net/ethernet/sgi/meth.c", "meth_tx_timeout"], ["drivers/net/ethernet/silan/sc92031.c", "sc92031_tx_timeout"], ["drivers/net/ethernet/sis/sis190.c", "sis190_tx_timeout"], ["drivers/net/ethernet/sis/sis900.c", "sis900_tx_timeout"], ["drivers/net/ethernet/smsc/epic100.c", "epic_tx_timeout"], ["drivers/net/ethernet/smsc/smc911x.c", "smc911x_timeout"], ["drivers/net/ethernet/smsc/smc9194.c", "smc_timeout"], ["drivers/net/ethernet/smsc/smc91c92_cs.c", "smc_tx_timeout"], ["drivers/net/ethernet/smsc/smc91x.c", "smc_timeout"], ["drivers/net/ethernet/stmicro/stmmac/stmmac_main.c", "stmmac_tx_timeout"], ["drivers/net/ethernet/sun/cassini.c", "cas_tx_timeout"], ["drivers/net/ethernet/sun/ldmvsw.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/niu.c", "niu_tx_timeout"], ["drivers/net/ethernet/sun/sunbmac.c", "bigmac_tx_timeout"], ["drivers/net/ethernet/sun/sungem.c", "gem_tx_timeout"], ["drivers/net/ethernet/sun/sunhme.c", "happy_meal_tx_timeout"], ["drivers/net/ethernet/sun/sunqe.c", "qe_tx_timeout"], ["drivers/net/ethernet/sun/sunvnet.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.h", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/synopsys/dwc-xlgmac-net.c", "xlgmac_tx_timeout"], ["drivers/net/ethernet/ti/cpmac.c", "cpmac_tx_timeout"], ["drivers/net/ethernet/ti/cpsw.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.h", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/davinci_emac.c", "emac_dev_tx_timeout"], ["drivers/net/ethernet/ti/netcp_core.c", "netcp_ndo_tx_timeout"], ["drivers/net/ethernet/ti/tlan.c", "tlan_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.h", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_wireless.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/spider_net.c", "spider_net_tx_timeout"], ["drivers/net/ethernet/toshiba/tc35815.c", "tc35815_tx_timeout"], ["drivers/net/ethernet/via/via-rhine.c", "rhine_tx_timeout"], ["drivers/net/ethernet/wiznet/w5100.c", "w5100_tx_timeout"], ["drivers/net/ethernet/wiznet/w5300.c", "w5300_tx_timeout"], ["drivers/net/ethernet/xilinx/xilinx_emaclite.c", "xemaclite_tx_timeout"], ["drivers/net/ethernet/xircom/xirc2ps_cs.c", "xirc_tx_timeout"], ["drivers/net/fjes/fjes_main.c", "fjes_tx_retry"], ["drivers/net/slip/slip.c", "sl_tx_timeout"], ["include/linux/usb/usbnet.h", "usbnet_tx_timeout"], ["drivers/net/usb/aqc111.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88172a.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88179_178a.c", "usbnet_tx_timeout"], ["drivers/net/usb/catc.c", "catc_tx_timeout"], ["drivers/net/usb/cdc_mbim.c", "usbnet_tx_timeout"], ["drivers/net/usb/cdc_ncm.c", "usbnet_tx_timeout"], ["drivers/net/usb/dm9601.c", "usbnet_tx_timeout"], ["drivers/net/usb/hso.c", "hso_net_tx_timeout"], ["drivers/net/usb/int51x1.c", "usbnet_tx_timeout"], ["drivers/net/usb/ipheth.c", "ipheth_tx_timeout"], ["drivers/net/usb/kaweth.c", "kaweth_tx_timeout"], ["drivers/net/usb/lan78xx.c", "lan78xx_tx_timeout"], ["drivers/net/usb/mcs7830.c", "usbnet_tx_timeout"], ["drivers/net/usb/pegasus.c", "pegasus_tx_timeout"], ["drivers/net/usb/qmi_wwan.c", "usbnet_tx_timeout"], ["drivers/net/usb/r8152.c", "rtl8152_tx_timeout"], ["drivers/net/usb/rndis_host.c", "usbnet_tx_timeout"], ["drivers/net/usb/rtl8150.c", "rtl8150_tx_timeout"], ["drivers/net/usb/sierra_net.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc75xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc95xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9700.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9800.c", "usbnet_tx_timeout"], ["drivers/net/usb/usbnet.c", "usbnet_tx_timeout"], ["drivers/net/vmxnet3/vmxnet3_drv.c", "vmxnet3_tx_timeout"], ["drivers/net/wan/cosa.c", "cosa_net_timeout"], ["drivers/net/wan/farsync.c", "fst_tx_timeout"], ["drivers/net/wan/fsl_ucc_hdlc.c", "uhdlc_tx_timeout"], ["drivers/net/wan/lmc/lmc_main.c", "lmc_driver_timeout"], ["drivers/net/wan/x25_asy.c", "x25_asy_timeout"], ["drivers/net/wimax/i2400m/netdev.c", "i2400m_tx_timeout"], ["drivers/net/wireless/intel/ipw2x00/ipw2100.c", "ipw2100_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/main.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco_usb.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco.h", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_dev.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.h", "islpci_eth_tx_timeout"], ["drivers/net/wireless/marvell/mwifiex/main.c", "mwifiex_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.c", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.h", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/rndis_wlan.c", "usbnet_tx_timeout"], ["drivers/net/wireless/wl3501_cs.c", "wl3501_tx_timeout"], ["drivers/net/wireless/zydas/zd1201.c", "zd1201_tx_timeout"], ["drivers/s390/net/qeth_core.h", "qeth_tx_timeout"], ["drivers/s390/net/qeth_core_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/staging/ks7010/ks_wlan_net.c", "ks_wlan_tx_timeout"], ["drivers/staging/qlge/qlge_main.c", "qlge_tx_timeout"], ["drivers/staging/rtl8192e/rtl8192e/rtl_core.c", "_rtl92e_tx_timeout"], ["drivers/staging/rtl8192u/r8192U_core.c", "tx_timeout"], ["drivers/staging/unisys/visornic/visornic_main.c", "visornic_xmit_timeout"], ["drivers/staging/wlan-ng/p80211netdev.c", "p80211knetdev_tx_timeout"], ["drivers/tty/n_gsm.c", "gsm_mux_net_tx_timeout"], ["drivers/tty/synclink.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclink_gt.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclinkmp.c", "hdlcdev_tx_timeout"], ["net/atm/lec.c", "lec_tx_timeout"], ["net/bluetooth/bnep/netdev.c", "bnep_net_timeout"] ); for my $p (@work) { my @pair = @$p; my $file = $pair[0]; my $func = $pair[1]; print STDERR $file , ": ", $func,"\n"; our @ARGV = ($file); while (<ARGV>) { if (m/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/) { print STDERR "found $1+$2 in $file\n"; } if (s/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/$1, unsigned int txqueue$2/) { print STDERR "$func found in $file\n"; } print; } } where the list of files and functions is simply from: git grep ndo_tx_timeout, with manual addition of headers in the rare cases where the function is from a header, then manually changing the few places which actually call ndo_tx_timeout. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Martin Habets <mhabets@solarflare.com> changes from v9: fixup a forward declaration changes from v9: more leftovers from v3 change changes from v8: fix up a missing direct call to timeout rebased on net-next changes from v7: fixup leftovers from v3 change changes from v6: fix typo in rtl driver changes from v5: add missing files (allow any net device argument name) changes from v4: add a missing driver header changes from v3: change queue # to unsigned Changes from v2: added headers Changes from v1: Fix errors found by kbuild: generalize the pattern a bit, to pick up a couple of instances missed by the previous version. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-12net: usb: lan78xx: Fix suspend/resume PHY register access errorCristian Birsan1-0/+1
Lan78xx driver accesses the PHY registers through MDIO bus over USB connection. When performing a suspend/resume, the PHY registers can be accessed before the USB connection is resumed. This will generate an error and will prevent the device to resume correctly. This patch adds the dependency between the MDIO bus and USB device to allow correct handling of suspend/resume. Fixes: ce85e13ad6ef ("lan78xx: Update to use phylib instead of mii_if_info.") Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+4
The only slightly tricky merge conflict was the netdevsim because the mutex locking fix overlapped a lot of driver reload reorganization. The rest were (relatively) trivial in nature. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28net: usb: lan78xx: Disable interrupts before calling generic_handle_irq()Daniel Wagner1-1/+4
lan78xx_status() will run with interrupts enabled due to the change in ed194d136769 ("usb: core: remove local_irq_save() around ->complete() handler"). generic_handle_irq() expects to be run with IRQs disabled. [ 4.886203] 000: irq 79 handler irq_default_primary_handler+0x0/0x8 enabled interrupts [ 4.886243] 000: WARNING: CPU: 0 PID: 0 at kernel/irq/handle.c:152 __handle_irq_event_percpu+0x154/0x168 [ 4.896294] 000: Modules linked in: [ 4.896301] 000: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.6 #39 [ 4.896310] 000: Hardware name: Raspberry Pi 3 Model B+ (DT) [ 4.896315] 000: pstate: 60000005 (nZCv daif -PAN -UAO) [ 4.896321] 000: pc : __handle_irq_event_percpu+0x154/0x168 [ 4.896331] 000: lr : __handle_irq_event_percpu+0x154/0x168 [ 4.896339] 000: sp : ffff000010003cc0 [ 4.896346] 000: x29: ffff000010003cc0 x28: 0000000000000060 [ 4.896355] 000: x27: ffff000011021980 x26: ffff00001189c72b [ 4.896364] 000: x25: ffff000011702bc0 x24: ffff800036d6e400 [ 4.896373] 000: x23: 000000000000004f x22: ffff000010003d64 [ 4.896381] 000: x21: 0000000000000000 x20: 0000000000000002 [ 4.896390] 000: x19: ffff8000371c8480 x18: 0000000000000060 [ 4.896398] 000: x17: 0000000000000000 x16: 00000000000000eb [ 4.896406] 000: x15: ffff000011712d18 x14: 7265746e69206465 [ 4.896414] 000: x13: ffff000010003ba0 x12: ffff000011712df0 [ 4.896422] 000: x11: 0000000000000001 x10: ffff000011712e08 [ 4.896430] 000: x9 : 0000000000000001 x8 : 000000000003c920 [ 4.896437] 000: x7 : ffff0000118cc410 x6 : ffff0000118c7f00 [ 4.896445] 000: x5 : 000000000003c920 x4 : 0000000000004510 [ 4.896453] 000: x3 : ffff000011712dc8 x2 : 0000000000000000 [ 4.896461] 000: x1 : 73a3f67df94c1500 x0 : 0000000000000000 [ 4.896466] 000: Call trace: [ 4.896471] 000: __handle_irq_event_percpu+0x154/0x168 [ 4.896481] 000: handle_irq_event_percpu+0x50/0xb0 [ 4.896489] 000: handle_irq_event+0x40/0x98 [ 4.896497] 000: handle_simple_irq+0xa4/0xf0 [ 4.896505] 000: generic_handle_irq+0x24/0x38 [ 4.896513] 000: intr_complete+0xb0/0xe0 [ 4.896525] 000: __usb_hcd_giveback_urb+0x58/0xd8 [ 4.896533] 000: usb_giveback_urb_bh+0xd0/0x170 [ 4.896539] 000: tasklet_action_common.isra.0+0x9c/0x128 [ 4.896549] 000: tasklet_hi_action+0x24/0x30 [ 4.896556] 000: __do_softirq+0x120/0x23c [ 4.896564] 000: irq_exit+0xb8/0xd8 [ 4.896571] 000: __handle_domain_irq+0x64/0xb8 [ 4.896579] 000: bcm2836_arm_irqchip_handle_irq+0x60/0xc0 [ 4.896586] 000: el1_irq+0xb8/0x140 [ 4.896592] 000: arch_cpu_idle+0x10/0x18 [ 4.896601] 000: do_idle+0x200/0x280 [ 4.896608] 000: cpu_startup_entry+0x20/0x28 [ 4.896615] 000: rest_init+0xb4/0xc0 [ 4.896623] 000: arch_call_rest_init+0xc/0x14 [ 4.896632] 000: start_kernel+0x454/0x480 Fixes: ed194d136769 ("usb: core: remove local_irq_save() around ->complete() handler") Cc: Woojung Huh <woojung.huh@microchip.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Stefan Wahren <wahrenst@gmx.net> Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Miller <davem@davemloft.net> Signed-off-by: Daniel Wagner <dwagner@suse.de> Tested-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-23net: lan78xx: remove set but not used variable 'event'YueHaibing1-3/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/usb/lan78xx.c:3995:6: warning: variable event set but not used [-Wunused-but-set-variable] It is never used, so can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-18net: usb: lan78xx: Connect PHY before registering MACAndrew Lunn1-6/+6
As soon as the netdev is registers, the kernel can start using the interface. If the driver connects the MAC to the PHY after the netdev is registered, there is a race condition where the interface can be opened without having the PHY connected. Change the order to close this race condition. Fixes: 92571a1aae40 ("lan78xx: Connect phy early") Reported-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-3/+5
Merge conflict of mlx5 resolved using instructions in merge commit 9566e650bf7fdf58384bb06df634f7531ca3a97e. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-16lan78xx: Fix memory leaksWenwen Wang1-3/+5
In lan78xx_probe(), a new urb is allocated through usb_alloc_urb() and saved to 'dev->urb_intr'. However, in the following execution, if an error occurs, 'dev->urb_intr' is not deallocated, leading to memory leaks. To fix this issue, invoke usb_free_urb() to free the allocated urb before returning from the function. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: usb: Merge cpu_to_le32s + memcpy to put_unaligned_le32Chuhong Yuan1-7/+4
Merge the combo uses of cpu_to_le32s and memcpy. Use put_unaligned_le32 instead. This simplifies the code. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: lan78xx: Merge memcpy + lexx_to_cpus to get_unaligned_lexxChuhong Yuan1-8/+4
Merge the combo use of memcpy and lexx_to_cpus. Use get_unaligned_lexx instead. This simplifies the code. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Acked-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04net: phy: fixed-phy: Drop GPIO from fixed_phy_add()Linus Walleij1-2/+1
All users of the fixed_phy_add() pass -1 as GPIO number to the fixed phy driver, and all users of fixed_phy_register() pass -1 as GPIO number as well, except for the device tree MDIO bus. Any new users should create a proper device and pass the GPIO as a descriptor associated with the device so delete the GPIO argument from the calls and drop the code looking requesting a GPIO in fixed_phy_add(). In fixed phy_register(), investigate the "fixed-link" node and pick the GPIO descriptor from "link-gpios" if this property exists. Move the corresponding code out of of_mdio.c as the fixed phy code anyways requires OF to be in use. Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+4
Lots of conflicts, by happily all cases of overlapping changes, parallel adds, things of that nature. Thanks to Stephen Rothwell, Saeed Mahameed, and others for their guidance in these resolutions. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18lan78xx: Resolve issue with changing MAC addressJason Martinsen1-0/+4
Current state for the lan78xx driver does not allow for changing the MAC address of the interface, without either removing the module (if you compiled it that way) or rebooting the machine. If you attempt to change the MAC address, ifconfig will show the new address, however, the system/interface will not respond to any traffic using that configuration. A few short-term options to work around this are to unload the module and reload it with the new MAC address, change the interface to "promisc", or reboot with the correct configuration to change the MAC. This patch enables the ability to change the MAC address via fairly normal means... ifdown <interface> modify entry in /etc/network/interfaces OR a similar method ifup <interface> Then test via any network communication, such as ICMP requests to gateway. My only test platform for this patch has been a raspberry pi model 3b+. Signed-off-by: Jason Martinsen <jasonmartinsen@msn.com> ----- Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11net: ethernet: Convert phydev advertize and supported from u32 to link modeAndrew Lunn1-11/+16
There are a few MAC/PHYs combinations which now support > 1Gbps. These may need to make use of link modes with bits > 31. Thus their supported PHY features or advertised features cannot be implemented using the current bitmap in a u32. Convert to using a linkmode bitmap, which can support all the currently devices link modes, and is future proof as more modes are added. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-13/+4
Minor conflict in net/core/rtnetlink.c, David Ahern's bug fix in 'net' overlapped the renaming of a netlink attribute in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29lan78xx: Check for supported Wake-on-LAN modesFlorian Fainelli1-13/+4
The driver supports a fair amount of Wake-on-LAN modes, but is not checking that the user specified one that is supported. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Woojung Huh <Woojung.Huh@Microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21net: lan78xx: Avoid unnecessary self assignmentNathan Chancellor1-4/+2
Clang warns when a variable is assigned to itself. drivers/net/usb/lan78xx.c:940:11: warning: explicitly assigning value of variable of type 'u32' (aka 'unsigned int') to itself [-Wself-assign] offset = offset; ~~~~~~ ^ ~~~~~~ 1 warning generated. Reorder the if statement to acheive the same result and avoid a self assignment warning. Link: https://github.com/ClangBuiltLinux/linux/issues/129 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17net: usb: remove redundant null pointer check before of_node_putzhong jiang1-2/+1
of_node_put has taken the null pointer check into account. So it is safe to remove the duplicated check before of_node_put. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: ethernet: Add helper to remove a supported link modeAndrew Lunn1-1/+1
Some MAC hardware cannot support a subset of link modes. e.g. often 1Gbps Full duplex is supported, but Half duplex is not. Add a helper to remove such a link mode. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.