aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/usb/smsc95xx.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-11-16usbnet: smsc95xx: check for csum being in last four bytesBen Dooks1-1/+18
The manual states that the checksum cannot lie in the last DWORD of the transmission, so add a basic check for this and fall back to software checksumming the packet. This only seems to trigger for ACK packets with no options or data to return to the other end, and the use of the tx-alignment option makes it more likely to happen. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-16usbnet: smsc95xx: fix memcpy for accessing rx-dataBen Dooks1-5/+2
Change the RX code to use get_unaligned_le32() instead of the combo of memcpy and cpu_to_le32s(&var). Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-16usbnet: smsc95xx: simplify tx_fixup codeBen Dooks1-15/+13
The smsc95xx_tx_fixup is doing multiple calls to skb_push() to put an 8-byte command header onto the packet. It would be easier to do one skb_push() and then copy the data in once the push is done. We also make the code smaller by using proper unaligned puts for the header. This merges in the CPU to LE32 conversion as well and makes the whole sequence easier to understand hopefully. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-16usbnet: smsc95xx: fix rx packet alignmentBen Dooks1-0/+1
The smsc95xx driver already takes into account the NET_IP_ALIGN parameter when setting up the receive packet data, which means we do not need to worry about aligning the packets in the usbnet driver. Adding the EVENT_NO_IP_ALIGN means that the IPv4 header is now passed to the ip_rcv() routine with the start on an aligned address. Tested on Raspberry Pi B3. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08net: smsc95xx: Fix MTU rangeStefan Wahren1-0/+2
The commit f77f0aee4da4 ("net: use core MTU range checking in USB NIC drivers") introduce a common MTU handling for usbnet. But it's missing the necessary changes for smsc95xx. So set the MTU range accordingly. This patch has been tested on a Raspberry Pi 3. Fixes: f77f0aee4da4 ("net: use core MTU range checking in USB NIC drivers") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-02usbnet: smsc95xx: disable carrier check while suspendingFrieder Schrempf1-0/+7
We need to make sure, that the carrier check polling is disabled while suspending. Otherwise we can end up with usbnet_read_cmd() being issued when only usbnet_read_cmd_nopm() is allowed. If this happens, read operations lock up. Fixes: d69d169493 ("usbnet: smsc95xx: fix link detection for disabled autonegotiation") Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Raghuram Chary J <RaghuramChary.Jallipalli@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-29smsc95xx: Check for Wake-on-LAN modesFlorian Fainelli1-0/+3
The driver does not check for Wake-on-LAN modes specified by an user, but will conditionally set the device as wake-up enabled or not based on that, which could be a very confusing user experience. Fixes: e0e474a83c18 ("smsc95xx: add wol magic packet support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2017-09-12smsc95xx: Configure pause time to 0xffff when tx flow control enabledNisar Sayed1-6/+5
Configure pause time to 0xffff when tx flow control enabled Set pause time to 0xffff in the pause frame to indicate the partner to stop sending the packets. When RX buffer frees up, the device sends pause frame with pause time zero for partner to resume transmission. Fixes: 2f7ca802bdae ("Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver") Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14smsc95xx: use ethtool_op_get_ts_info()Petr Kulhavy1-0/+1
This change enables the use of SW timestamping on Raspberry PI. smsc95xx uses the usbnet transmit function usbnet_start_xmit(), which implements software timestamping. However the SOF_TIMESTAMPING_TX_SOFTWARE capability was missing and only SOF_TIMESTAMPING_RX_SOFTWARE was announced. By using ethtool_op_get_ts_info() as get_ts_info() also the SOF_TIMESTAMPING_TX_SOFTWARE is announced. Signed-off-by: Petr Kulhavy <brain@jikos.cz> Reviewed-by: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21smsc95xx: Support only IPv4 TCP/UDP csum offloadNisar Sayed1-3/+10
When TX checksum offload is used, if the computed checksum is 0 the LAN95xx device do not alter the checksum to 0xffff. In the case of ipv4 UDP checksum, it indicates to receiver that no checksum is calculated. Under ipv6, UDP checksum yields a result of zero must be changed to 0xffff. Hence disabling checksum offload for ipv6 packets. Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Reported-by: popcorn mix <popcornmix@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-6/+6
Both conflict were simple overlapping changes. In the kaweth case, Eric Dumazet's skb_cow() bug fix overlapped the conversion of the driver in net-next to use in-netdev stats. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20smsc95xx: Use skb_cow_head to deal with cloned skbsJames Hughes1-6/+6
The driver was failing to check that the SKB wasn't cloned before adding checksum data. Replace existing handling to extend/copy the header buffer with skb_cow_head. Signed-off-by: James Hughes <james.hughes@raspberrypi.org> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17smsc95xx: Add comments to the registers definitionMartin Wetterwald1-2/+2
This chip is used by a lot of embedded devices and also by the Raspberry Pi 1, 2 & 3 which were created to promote the study of computer sciences. Students wanting to learn kernel / network device driver programming through those devices can only rely on the Linux kernel driver source to make their own. This commit adds a lot of comments to the registers definition to expand the register names. Cc: Steve Glendinning <steve.glendinning@shawell.net> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> CC: David Miller <davem@davemloft.net> Signed-off-by: Martin Wetterwald <martin@wetterwald.eu> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Steve Glendinning <steve.glendinning@shawell.net> Acked-by: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: usbnet: support 64bit statsGreg Ungerer1-0/+1
Add support for the net stats64 counters to the usbnet core. With that in place put the hooks into every usbnet driver to use it. This is a strait forward addition of 64bit counters for RX and TX packet and byte counts. It is done in the same style as for the other net drivers that support stats64. Note that the other stats fields remain as 32bit sized values (error counts, etc). The motivation to add this is that it is not particularly difficult to get the RX and TX byte counts to wrap on 32bit platforms. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21net: usb: smsc95xx: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-12/+12
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-06smsc95xx: Add mdix control via ethtoolWoojung Huh1-3/+106
Add mdix control through ethtool. Signed-off-by: Woojung Huh <Woojung.huh@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31usbnet: smsc95xx: fix link detection for disabled autonegotiationChristoph Fritz1-0/+51
To detect link status up/down for connections where autonegotiation is explicitly disabled, we don't get an irq but need to poll the status register for link up/down detection. This patch adds a workqueue to poll for link status. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04usbnet: smsc95xx: silence an uninitialized variable warningDan Carpenter1-1/+3
If the call to fn() fails then "buf" is uninitialized. Just return the error code in that case. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-01net/smscx5xx: use the device tree for mac addressArnd Bergmann1-1/+11
This takes the MAC address for smsc75xx/smsc95xx USB network devices from a the device tree. This is required to get a usable persistent address on the popular beagleboard, whose hardware designers accidentally forgot that an ethernet device really requires an a MAC address to be functional. The Raspberry Pi also ships smsc9514 without a serial EEPROM, stores the MAC address in ROM accessible via VC4 firmware. The smsc75xx and smsc95xx drivers are just two copies of the same code, so better fix both. [lkundrak@v3.sk: updated to use of_get_property() as per suggestion from Arnd, reworded the message and comments a bit] Tested-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-22usbnet: remove invalid checkAndrzej Hajda1-5/+0
skb->len is always non-negative. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2038576 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-11usbnet: smsc95xx: dereferencing NULL pointerSudip Mukherjee1-2/+4
we were dereferencing dev to initialize pdata. but just after that we have a BUG_ON(!dev). so we were basically dereferencing the pointer first and then tesing it for NULL. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10usbnet: smsc95xx: add reset_resume function with reset operationJoonyoung Shim1-1/+13
The smsc95xx needs to resume with reset operation. Otherwise it causes system hang by network error like below after resume. This case appears on odroid u3 board. [ 9.727600] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped [ 9.727648] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped [ 9.727689] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped [ 9.727728] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped [ 9.729486] PM: resume of devices complete after 2011.219 msecs [ 10.117609] Restarting tasks ... done. [ 11.725099] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped [ 13.480846] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped [ 13.481361] smsc95xx 1-2:1.0 eth0: kevent 2 may have been dropped ... Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17usbnet: remove generic hard_header_len checkEmil Goode1-0/+4
This patch removes a generic hard_header_len check from the usbnet module that is causing dropped packages under certain circumstances for devices that send rx packets that cross urb boundaries. One example is the AX88772B which occasionally send rx packets that cross urb boundaries where the remaining partial packet is sent with no hardware header. When the buffer with a partial packet is of less number of octets than the value of hard_header_len the buffer is discarded by the usbnet module. With AX88772B this can be reproduced by using ping with a packet size between 1965-1976. The bug has been reported here: https://bugzilla.kernel.org/show_bug.cgi?id=29082 This patch introduces the following changes: - Removes the generic hard_header_len check in the rx_complete function in the usbnet module. - Introduces a ETH_HLEN check for skbs that are not cloned from within a rx_fixup callback. - For safety a hard_header_len check is added to each rx_fixup callback function that could be affected by this change. These extra checks could possibly be removed by someone who has the hardware to test. - Removes a call to dev_kfree_skb_any() and instead utilizes the dev->done list to queue skbs for cleanup. The changes place full responsibility on the rx_fixup callback functions that clone skbs to only pass valid skbs to the usbnet_skb_return function. Signed-off-by: Emil Goode <emilgoode@gmail.com> Reported-by: Igor Gnatenko <i.gnatenko.brain@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16drivers/net: delete non-required instances of include <linux/init.h>Paul Gortmaker1-1/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. This covers everything under drivers/net except for wireless, which has been submitted separately. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06usb: Fix FSF address in file headersJeff Kirsher1-2/+1
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: Oliver Neukum <oliver@neukum.org> CC: Steve Glendinning <steve.glendinning@shawell.net> CC: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-25usbnet: smsc95xx: don't recover device if suspend fails in system sleepMing Lei1-1/+5
If suspend callback fails in system sleep context, usb core will ignore the failure and let system sleep go ahead further, so this patch doesn't recover device under this situation. Also add comments on the case. Acked-by: David S. Miller <davem@davemloft.net> Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-25usbnet: smsc95xx: rename FEATURE_AUTOSUSPENDMing Lei1-7/+7
The name of FEATURE_AUTOSUSPEND is very misleading and the actual meaning is remote wakeup, but a device incapable of remote wakeup still can support USB autosuspend under some situations, so rename it to avoid misunderstanding. Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-25usbnet: smsc95xx: fix broken runtime suspendMing Lei1-10/+2
Commit b2d4b150(smsc95xx: enable dynamic autosuspend) implements autosuspend, but breaks current runtime suspend, such as: when the interface becomes down, the usb device can't be put into runtime suspend any more. This patch fixes the broken runtime suspend. Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-25usbnet: smsc95xx: fix suspend failureMing Lei1-3/+9
The three below functions: smsc95xx_enter_suspend0() smsc95xx_enter_suspend1() smsc95xx_enter_suspend2() return > 0 in case of success, so they will cause smsc95xx_suspend() to return > 0 and cause suspend failure. The bug is introduced in commit 3b9f7d(smsc95xx: fix error handling in suspend failure case). Cc: <stable@vger.kernel.org> [3.8] Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-04drivers: net: usb: Remove unnecessary alloc/OOM messagesJoe Perches1-4/+2
alloc failures already get standardized OOM messages and a dump_stack. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-04smsc95xx: enable dynamic autosuspendSteve Glendinning1-1/+150
This patch enables USB dynamic autosuspend for LAN9500A. This saves very little power in itself, but it allows power saving in upstream hubs/hosts. The earlier devices in this family (LAN9500/9512/9514) do not support this feature. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-04smsc95xx: eliminate duplicate warnings on io failureSteve Glendinning1-217/+67
The register read/write functions already log a warning if an access fails, so this patch removes the additional warnings logged by callers that don't add any more information. This patch makes the resulting driver smaller by not containing as many warning strings. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-10smsc95xx: fix async register writes on big endian platformsSteve Glendinning1-5/+9
This patch fixes a missing endian conversion which results in the interface failing to come up on BE platforms. It also removes an unnecessary pointer dereference from this function. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-10smsc95xx: fix register dump of last registerSteve Glendinning1-1/+1
This patch fixes the ethtool register dump for smsc95xx to dump all 4 bytes of the final register (COE_CR) instead of just the first byte. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-30smsc95xx: expand check_ macrosSteve Glendinning1-121/+391
These macros, while reducing the amount of code, hide flow control and make the code more confusing to follow and review. This patch expands them. It should have no functional effect on the driver. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-30smsc95xx: fix smsc_crc return typeSteve Glendinning1-2/+3
This patch fixes a bug introduced in bbd9f9e which could prevent some wakeups from working correctly if multiple wol options were selected. This helper function calculates a 16-bit crc and shifts it into either the high or low 16 bits of a u32 so the caller can or it directly into place. The function previously had a u16 return type so would always have returned zero when filter was odd. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Reported-by: Bjorn Mork <bjorn@mork.no> Cc: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-30smsc95xx: don't enable remote wakeup directlySteve Glendinning1-25/+5
As pointed out by Bjorn Mork, the generic "usb" driver sets this for us so no need to directly set it in this driver. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Cc: Bjorn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-30smsc95xx: fix error handling in suspend failure caseSteve Glendinning1-21/+29
This patch ensures that if we fail to suspend the LAN9500 device we call usbnet_resume before returning failure, instead of leaving the usbnet driver in an unusable state. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-30smsc95xx: fix suspend buffer overflowSteve Glendinning1-1/+6
This patch fixes a buffer overflow introduced by bbd9f9e, where the filter_mask array is accessed beyond its bounds. Updated to also add a check for kzalloc failure, as reported by Bjorn Mork and Joe Perches. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Cc: Bjorn Mork <bjorn@mork.no> Cc: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-25smsc: Add logging message newlinesJoe Perches1-92/+92
Avoid any possible message logging interleaving by adding missing newlines. Align arguments. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-23smsc95xx: refactor entering suspend modesSteve Glendinning1-79/+99
This patch splits out the logic for entering suspend modes to separate functions, to reduce the complexity of the smsc95xx_suspend function. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-23smsc95xx: support PHY wakeup sourceSteve Glendinning1-17/+147
This patch enables LAN9500 family devices to wake from suspend on either link up or link down events It also adds _nopm versions of mdio access functions, so we can safely call them from suspend and resume functions Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-23smsc95xx: detect chip revision specific featuresSteve Glendinning1-9/+20
Instead of storing the number of wake-up frame filter registers in the pdata structure, this patch changes the driver to detect the type of device we have and store its available features. The new two features will be used in future patches. This patch is intended to have no change in behaviour. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-23smsc95xx: fix error checking of usbnet_resumeSteve Glendinning1-1/+1
without this patch the two lines below won't ever execute Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
Minor line offset auto-merges. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13smsc95xx: set MII_BUSY bit to read/write PHY regsSteve Glendinning1-2/+2
The device datasheet specifies the BUSY bit must be set when reading or writing phy registers. This patch ensures we do that. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c Minor conflict between the BCM_CNIC define removal in net-next and a bug fix added to net. Based upon a conflict resolution patch posted by Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07usbnet: smsc95xx: apply the introduced usbnet_{read|write}_cmd_nopmMing Lei1-49/+85
This patch applies the introduced usbnet_read_cmd_nopm() and usbnet_write_cmd_nopm() in the callback of resume and suspend to avoid deadlock if USB runtime PM is considered into usbnet_read_cmd() and usbnet_write_cmd(). Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07usbnet: smsc95xx: fix memory leak in smsc95xx_suspendMing Lei1-3/+10
This patch fixes memory leak in smsc95xx_suspend. Also, it isn't necessary to bother mm to allocate 8bytes/16byte, and we can use stack variable safely. Acked-By: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.