aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/usb (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-10-18net/usb/usbnet: Convert timers to use timer_setup()Kees Cook1-7/+5
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Since the callback is called from both a timer and a tasklet, adjust the tasklet to pass the timer address too. When tasklets have their .data field removed, this can be refactored to call a central function after resolving the correct container_of() for a separate callback function for timer and tasklet. Cc: Oliver Neukum <oneukum@suse.com> Cc: netdev@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+13
2017-10-09cdc_ether: flag the u-blox TOBY-L2 and SARA-U2 as wwanAleksander Morgado1-0/+13
The u-blox TOBY-L2 is a LTE Cat 4 module with HSPA+ and 2G fallback. This module allows switching to different USB profiles with the 'AT+UUSBCONF' command, and provides a ECM network interface when the 'AT+UUSBCONF=2' profile is selected. The u-blox SARA-U2 is a HSPA module with 2G fallback. The default USB configuration includes a ECM network interface. Both these modules are controlled via AT commands through one of the TTYs exposed. Connecting these modules may be done just by activating the desired PDP context with 'AT+CGACT=1,<cid>' and then running DHCP on the ECM interface. Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-1/+26
Just simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04net: Add extack to upper device linkingDavid Ahern1-1/+1
Add extack arg to netdev_upper_dev_link and netdev_master_upper_dev_link Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03rndis_host: support Novatel Verizon USB730LAleksander Morgado2-1/+14
Treat the ef/04/01 interface class/subclass/protocol combination used by the Novatel Verizon USB730L (1410:9030) as a possible RNDIS interface. T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 3 P: Vendor=1410 ProdID=9030 Rev=03.10 S: Manufacturer=Novatel Wireless S: Product=MiFi USB730L S: SerialNumber=0123456789ABCDEF C: #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host I: If#= 2 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid Once the network interface is brought up, the user just needs to run a DHCP client to get IP address and routing setup. As a side note, other Novatel Verizon USB730L models with the same vid:pid end up exposing a standard ECM interface which doesn't require any other kernel update to make it work. Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Reviewed-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01r8152: add Linksys USB3GIGV1 idGrant Grundler2-0/+12
This linksys dongle by default comes up in cdc_ether mode. This patch allows r8152 to claim the device: Bus 002 Device 002: ID 13b1:0041 Linksys Signed-off-by: Grant Grundler <grundler@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-10/+24
2017-09-22net: Remove useless function skb_header_releaseGao Feng1-1/+1
There is no one which would invokes the function skb_header_release. So just remove it now. Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net: usb: catc: use setup_timer() helperAllen Pais1-3/+1
Use setup_timer function instead of initializing timer with the function and data fields. Signed-off-by: Allen Pais <allen.lkml@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21lan78xx: Use default values loaded from EEPROM/OTP after resetNisar Sayed1-1/+0
Use default value of auto duplex and auto speed values loaded from EEPROM/OTP after reset. The LAN78xx allows platform configurations to be loaded from EEPROM/OTP. Ex: When external phy is connected, the MAC can be configured to have correct auto speed, auto duplex, auto polarity configured from the EEPROM/OTP. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21lan78xx: Allow EEPROM write for less than MAX_EEPROM_SIZENisar Sayed1-5/+4
Allow EEPROM write for less than MAX_EEPROM_SIZE Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21lan78xx: Fix for eeprom read/write when device auto suspendNisar Sayed1-4/+20
Fix for eeprom read/write when device auto suspend Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-12smsc95xx: Configure pause time to 0xffff when tx flow control enabledNisar Sayed1-6/+5
Configure pause time to 0xffff when tx flow control enabled Set pause time to 0xffff in the pause frame to indicate the partner to stop sending the packets. When RX buffer frees up, the device sends pause frame with pause time zero for partner to resume transmission. Fixes: 2f7ca802bdae ("Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver") Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+7
Three cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28cdc_ncm: flag the u-blox TOBY-L4 as wwanAleksander Morgado1-0/+7
The u-blox TOBY-L4 is a LTE Advanced (Cat 6) module with HSPA+ and 2G fallback. Unlike the TOBY-L2, this module has one single USB layout and exposes several TTYs for control and a NCM interface for data. Connecting this module may be done just by activating the desired PDP context with 'AT+CGACT=1,<cid>' and then running DHCP on the NCM interface. Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller5-19/+55
The UDP offload conflict is dealt with by simply taking what is in net-next where we have removed all of the UFO handling code entirely. The TCP conflict was a case of local variables in a function being removed from both net and net-next. In netvsc we had an assignment right next to where a missing set of u64 stats sync object inits were added. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08qmi_wwan: fix NULL deref on disconnectBjørn Mork1-1/+5
qmi_wwan_disconnect is called twice when disconnecting devices with separate control and data interfaces. The first invocation will set the interface data to NULL for both interfaces to flag that the disconnect has been handled. But the matching NULL check was left out when qmi_wwan_disconnect was added, resulting in this oops: usb 2-1.4: USB disconnect, device number 4 qmi_wwan 2-1.4:1.6 wwp0s29u1u4i6: unregister 'qmi_wwan' usb-0000:00:1d.0-1.4, WWAN/QMI device BUG: unable to handle kernel NULL pointer dereference at 00000000000000e0 IP: qmi_wwan_disconnect+0x25/0xc0 [qmi_wwan] PGD 0 P4D 0 Oops: 0000 [#1] SMP Modules linked in: <stripped irrelevant module list> CPU: 2 PID: 33 Comm: kworker/2:1 Tainted: G E 4.12.3-nr44-normandy-r1500619820+ #1 Hardware name: LENOVO 4291LR7/4291LR7, BIOS CBET4000 4.6-810-g50522254fb 07/21/2017 Workqueue: usb_hub_wq hub_event [usbcore] task: ffff8c882b716040 task.stack: ffffb8e800d84000 RIP: 0010:qmi_wwan_disconnect+0x25/0xc0 [qmi_wwan] RSP: 0018:ffffb8e800d87b38 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff8c8824f3f1d0 RDI: ffff8c8824ef6400 RBP: ffff8c8824ef6400 R08: 0000000000000000 R09: 0000000000000000 R10: ffffb8e800d87780 R11: 0000000000000011 R12: ffffffffc07ea0e8 R13: ffff8c8824e2e000 R14: ffff8c8824e2e098 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8c8835300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000e0 CR3: 0000000229ca5000 CR4: 00000000000406e0 Call Trace: ? usb_unbind_interface+0x71/0x270 [usbcore] ? device_release_driver_internal+0x154/0x210 ? qmi_wwan_unbind+0x6d/0xc0 [qmi_wwan] ? usbnet_disconnect+0x6c/0xf0 [usbnet] ? qmi_wwan_disconnect+0x87/0xc0 [qmi_wwan] ? usb_unbind_interface+0x71/0x270 [usbcore] ? device_release_driver_internal+0x154/0x210 Reported-and-tested-by: Nathaniel Roach <nroach44@gmail.com> Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08qmi_wwan: fix NULL deref on disconnectBjørn Mork1-1/+5
qmi_wwan_disconnect is called twice when disconnecting devices with separate control and data interfaces. The first invocation will set the interface data to NULL for both interfaces to flag that the disconnect has been handled. But the matching NULL check was left out when qmi_wwan_disconnect was added, resulting in this oops: usb 2-1.4: USB disconnect, device number 4 qmi_wwan 2-1.4:1.6 wwp0s29u1u4i6: unregister 'qmi_wwan' usb-0000:00:1d.0-1.4, WWAN/QMI device BUG: unable to handle kernel NULL pointer dereference at 00000000000000e0 IP: qmi_wwan_disconnect+0x25/0xc0 [qmi_wwan] PGD 0 P4D 0 Oops: 0000 [#1] SMP Modules linked in: <stripped irrelevant module list> CPU: 2 PID: 33 Comm: kworker/2:1 Tainted: G E 4.12.3-nr44-normandy-r1500619820+ #1 Hardware name: LENOVO 4291LR7/4291LR7, BIOS CBET4000 4.6-810-g50522254fb 07/21/2017 Workqueue: usb_hub_wq hub_event [usbcore] task: ffff8c882b716040 task.stack: ffffb8e800d84000 RIP: 0010:qmi_wwan_disconnect+0x25/0xc0 [qmi_wwan] RSP: 0018:ffffb8e800d87b38 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff8c8824f3f1d0 RDI: ffff8c8824ef6400 RBP: ffff8c8824ef6400 R08: 0000000000000000 R09: 0000000000000000 R10: ffffb8e800d87780 R11: 0000000000000011 R12: ffffffffc07ea0e8 R13: ffff8c8824e2e000 R14: ffff8c8824e2e098 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8c8835300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000e0 CR3: 0000000229ca5000 CR4: 00000000000406e0 Call Trace: ? usb_unbind_interface+0x71/0x270 [usbcore] ? device_release_driver_internal+0x154/0x210 ? qmi_wwan_unbind+0x6d/0xc0 [qmi_wwan] ? usbnet_disconnect+0x6c/0xf0 [usbnet] ? qmi_wwan_disconnect+0x87/0xc0 [qmi_wwan] ? usb_unbind_interface+0x71/0x270 [usbcore] ? device_release_driver_internal+0x154/0x210 Reported-and-tested-by: Nathaniel Roach <nroach44@gmail.com> Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08net: usb: rtl8150: constify usb_device_idArvind Yadav1-1/+1
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08net: usb: r8152: constify usb_device_idArvind Yadav1-1/+1
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08net: usb: kaweth: constify usb_device_idArvind Yadav1-1/+1
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08net: usb: ipheth: constify usb_device_idArvind Yadav1-1/+1
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08net: usb: cdc-phonet: constify usb_device_idArvind Yadav1-1/+1
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08net: usb: catc: constify usb_device_id and fix space before '[' errorArvind Yadav1-1/+1
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Fix checkpatch.pl error: ERROR: space prohibited before open square bracket '['. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07asix: Fix small memory leak in ax88772_unbind()Dean Jenkins3-0/+17
When Ethernet frames span mulitple URBs, the netdev buffer memory pointed to by the asix_rx_fixup_info structure remains allocated during the time gap between the 2 executions of asix_rx_fixup_internal(). This means that if ax88772_unbind() is called within this time gap to free the memory of the parent private data structure then a memory leak of the part filled netdev buffer memory will occur. Therefore, create a new function asix_rx_fixup_common_free() to free the memory of the netdev buffer and add a call to asix_rx_fixup_common_free() from inside ax88772_unbind(). Consequently when an unbind occurs part way through receiving an Ethernet frame, the netdev buffer memory that is holding part of the received Ethernet frame will now be freed. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07asix: Ensure asix_rx_fixup_info members are all resetDean Jenkins1-9/+25
There is a risk that the members of the structure asix_rx_fixup_info become unsynchronised leading to the possibility of a malfunction. For example, rx->split_head was not being set to false after an error was detected so potentially could cause a malformed 32-bit Data header word to be formed. Therefore add function reset_asix_rx_fixup_info() to reset all the members of asix_rx_fixup_info so that future processing will start with known initial conditions. Also, if (skb->len != offset) becomes true then call reset_asix_rx_fixup_info() so that the processing of the next URB starts with known initial conditions. Without the call, the check does nothing which potentially could lead to a malfunction when the next URB is processed. In addition, for robustness, call reset_asix_rx_fixup_info() before every error path's "return 0". This ensures that the next URB is processed from known initial conditions. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07asix: Add rx->ax_skb = NULL after usbnet_skb_return()Dean Jenkins1-1/+3
In asix_rx_fixup_internal() there is a risk that rx->ax_skb gets reused after passing the Ethernet frame into the network stack via usbnet_skb_return(). The risks include: a) asynchronously freeing rx->ax_skb after passing the netdev buffer to the NAPI layer which might corrupt the backlog queue. b) erroneously reusing rx->ax_skb such as calling skb_put_data() multiple times which causes writing off the end of the netdev buffer. Therefore add a defensive rx->ax_skb = NULL after usbnet_skb_return() so that it is not possible to free rx->ax_skb or to apply skb_put_data() too many times. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02usb: qmi_wwan: add D-Link DWM-222 device IDHector Martin1-0/+1
Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02lan78xx: Fix to handle hard_header_len updateNisar Sayed1-3/+3
Fix to handle hard_header_len update When ifconfig up/down sequence is initiated hard_header_len get updated incrementally for each ifconfig up /down sequence, this leads invalid hard_header_len, moving to lan78xx_bind to have one time update of hard_header_len addresses the issue. Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02lan78xx: USB fast connect/disconnect crash fixNisar Sayed1-6/+6
USB fast connect/disconnect crash fix When USB plugged/unplugged at fast rate, lan78xx_mdio_init() in lan78xx_bind() failing case is not handled. Whenever lan78xx_mdio_init() failed, dev->mdiobus will be freed, however since lan78xx_bind() not consider as error and try to proceed for further initialization in lan78xx_probe() which leads system hung/crash. Also when register_netdev() failed, netdev is freed without calling lan78xx_unbind(). Hence halting the failed cases right manner fixes the system crash/hung issue. Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-0/+35
2017-07-18net: cdc_ncm: constify attribute_group structures.Arvind Yadav1-1/+1
attribute_group are not supposed to change at runtime. All functions working with attribute_group provided by <linux/netdevice.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 13275 928 1 14204 377c drivers/net/usb/cdc_ncm.o File size After adding 'const': text data bss dec hex filename 13339 864 1 14204 377c drivers/net/usb/cdc_ncm.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14smsc95xx: use ethtool_op_get_ts_info()Petr Kulhavy1-0/+1
This change enables the use of SW timestamping on Raspberry PI. smsc95xx uses the usbnet transmit function usbnet_start_xmit(), which implements software timestamping. However the SOF_TIMESTAMPING_TX_SOFTWARE capability was missing and only SOF_TIMESTAMPING_RX_SOFTWARE was announced. By using ethtool_op_get_ts_info() as get_ts_info() also the SOF_TIMESTAMPING_TX_SOFTWARE is announced. Signed-off-by: Petr Kulhavy <brain@jikos.cz> Reviewed-by: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14cdc_ncm: Set NTB format again after altsetting switch for Huawei devicesEnrico Mioso2-0/+34
Some firmwares in Huawei E3372H devices have been observed to switch back to NTB 32-bit format after altsetting switch. This patch implements a driver flag to check for the device settings and set NTB format to 16-bit again if needed. The flag has been activated for devices controlled by the huawei_cdc_ncm.c driver. V1->V2: - fixed broken error checks - some corrections to the commit message V2->V3: - variable name changes, to clarify what's happening - check (and possibly set) the NTB format later in the common bind code path Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Reported-and-tested-by: Christian Panton <christian@panton.org> Reviewed-by: Bjørn Mork <bjorn@mork.no> CC: Bjørn Mork <bjorn@mork.no> CC: Christian Panton <christian@panton.org> CC: linux-usb@vger.kernel.org CC: netdev@vger.kernel.org CC: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03net: cdc_mbim: apply "NDP to end" quirk to HP lt4132Tore Anderson1-0/+7
The HP lt4132 LTE/HSPA+ 4G Module (03f0:a31d) is a rebranded Huawei ME906s-158 device. It, like the ME906s-158, requires the "NDP to end" quirk for correct operation. Signed-off-by: Tore Anderson <tore@fud.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03net: cdc_ncm: Reduce memory use when kernel memory lowJim Baxter1-12/+42
The CDC-NCM driver can require large amounts of memory to create skb's and this can be a problem when the memory becomes fragmented. This especially affects embedded systems that have constrained resources but wish to maximise the throughput of CDC-NCM with 16KiB NTB's. The issue is after running for a while the kernel memory can become fragmented and it needs compacting. If the NTB allocation is needed before the memory has been compacted the atomic allocation can fail which can cause increased latency, large re-transmissions or disconnections depending upon the data being transmitted at the time. This situation occurs for less than a second until the kernel has compacted the memory but the failed devices can take a lot longer to recover from the failed TX packets. To ease this temporary situation I modified the CDC-NCM TX path to temporarily switch into a reduced memory mode which allocates an NTB that will fit into a USB_CDC_NCM_NTB_MIN_OUT_SIZE (default 2048 Bytes) sized memory block and only transmit NTB's with a single network frame until the memory situation is resolved. Each time this issue occurs we wait for an increasing number of reduced size allocations before requesting a full size one to not put additional pressure on a low memory system. Once the memory is compacted the CDC-NCM data can resume transmitting at the normal tx_max rate once again. Signed-off-by: Jim Baxter <jim_baxter@mentor.com> Reviewed-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+16
A set of overlapping changes in macvlan and the rocker driver, nothing serious. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-27net: usb: asix88179_178a: Add support for the Belkin B2B128Andrew F. Davis1-0/+16
The Belkin B2B128 is a USB 3.0 Hub + Gigabit Ethernet Adapter, the Ethernet adapter uses the ASIX AX88179 USB 3.0 to Gigabit Ethernet chip supported by this driver, add the USB ID for the same. This patch is based on work by Geoffrey Tran <geoffrey.tran@gmail.com> who has indicated they would like this upstreamed by someone more familiar with the upstreaming process. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-21r8152: correct the definitionhayeswang1-11/+11
Replace VLAN_HLEN and CRC_SIZE with ETH_FCS_LEN. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20net: manual clean code which call skb_put_[data:zero]yuan linyu2-10/+8
Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20net: replace more place to skb_put_[data:zero]yuan linyu1-2/+2
spatch file, @@ expression skb, len, data; type t; @@ -memcpy((t *)skb_put(skb, len), data, len); +skb_put_data(skb, data, len); @@ identifier p; expression skb, len, data; type t; @@ -p = (t *)memset(skb_put(skb, len), data, len); +p = skb_put_zero(skb, len); @@ expression skb, len, data; type t; @@ -memcpy((t *)__skb_put(skb, len), data, len); +__skb_put_data(skb, data, len); @@ identifier p; expression skb, len, data; type t; @@ -p = (t *)memset(__skb_put(skb, len), data, len); +p = __skb_put_zero(skb, len); Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20net: introduce __skb_put_[zero, data, u8]yuan linyu1-1/+1
follow Johannes Berg, semantic patch file as below, @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = __skb_put(skb, len); +p = __skb_put_zero(skb, len); | -p = (t)__skb_put(skb, len); +p = __skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ identifier p; expression len; expression skb; type t; @@ ( -t p = __skb_put(skb, len); +t p = __skb_put_zero(skb, len); ) ... when != p ( -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = __skb_put(skb, sizeof(t)); +p = __skb_put_zero(skb, sizeof(t)); | -p = (t *)__skb_put(skb, sizeof(t)); +p = __skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(__skb_put(skb, len), 0, len); +__skb_put_zero(skb, len); @@ expression skb, len, data; @@ -memcpy(__skb_put(skb, len), data, len); +__skb_put_data(skb, data, len); @@ expression SKB, C, S; typedef u8; identifier fn = {__skb_put}; fresh identifier fn2 = fn ## "_u8"; @@ - *(u8 *)fn(SKB, S) = C; + fn2(SKB, C); Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: add and use skb_put_u8()Johannes Berg3-6/+6
Joe and Bjørn suggested that it'd be nicer to not have the cast in the fairly common case of doing *(u8 *)skb_put(skb, 1) = c; Add skb_put_u8() for this case, and use it across the code, using the following spatch: @@ expression SKB, C, S; typedef u8; identifier fn = {skb_put}; fresh identifier fn2 = fn ## "_u8"; @@ - *(u8 *)fn(SKB, S) = C; + fn2(SKB, C); Note that due to the "S", the spatch isn't perfect, it should have checked that S is 1, but there's also places that use a sizeof expression like sizeof(var) or sizeof(u8) etc. Turns out that nobody ever did something like *(u8 *)skb_put(skb, 2) = c; which would be wrong anyway since the second byte wouldn't be initialized. Suggested-by: Joe Perches <joe@perches.com> Suggested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg7-7/+7
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_put & friends return void pointersJohannes Berg3-7/+7
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg9-19/+17
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: convert many more places to skb_put_zero()Johannes Berg2-3/+3
There were many places that my previous spatch didn't find, as pointed out by yuan linyu in various patches. The following spatch found many more and also removes the now unnecessary casts: @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_zero(skb, len); | -p = (t)skb_put(skb, len); +p = skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(skb_put(skb, len), 0, len); +skb_put_zero(skb, len); Apply it to the tree (with one manual fixup to keep the comment in vxlan.c, which spatch removed.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16r8152: move calling delay_autosuspend functionhayeswang1-7/+5
Move calling delay_autosuspend() in rtl8152_runtime_suspend(). Calling delay_autosuspend() as late as possible. The original flows are 1. check if the driver/device is busy now. 2. set wake events. 3. enter runtime suspend. If the wake event occurs between (1) and (2), the device may miss it. Besides, to avoid the runtime resume occurs after runtime suspend immediately, move the checking to the end of rtl8152_runtime_suspend(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16r8152: split rtl8152_resume functionhayeswang1-38/+61
Split rtl8152_resume() into rtl8152_runtime_resume() and rtl8152_system_resume(). Besides, replace GFP_KERNEL with GFP_NOIO for usb_submit_urb(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.