aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/wil6210/txrx.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-11-23wil6210: fix net queue stop/wakeDedy Lansky1-10/+100
Driver calls to netif_tx_stop_all_queues/netif_tx_wake_all_queues are inconsistent. In several cases, driver can get to a situation where net queues are stopped forever and data cannot be sent. The fix is to stop net queues if there is at least one vring which is "full" and to wake net queues if all vrings are not "full". Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-08-19wil6210: prevent usage of incorrect TX hwtailMaya Erez1-2/+7
txdata->enabled is used in order to determine if the TX vring is valid. As the data transmit is handled in a different context, in case txdata->enabled is set before vring->hwtail is updated, an old or corrupted vring->hwtail can be used. Protect setting of txdata->enabled and vring->hwtail to prevent a case where TX vring start handling TX packets before setting vring->hwtail. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-28wil6210: fix dma mapping error cleanup in __wil_tx_vring_tsoMaya Erez1-1/+1
In case we fail to map one of the TSO SKB fragments, we need to clear all the mapped descriptors, from swhead to swhead+descs_used-1. Change the desc index calculation to i = (swhead + descs_used - 1) % vring->size; to prevent unmpping of (swhead + descs_used) descriptor that wasn't mapped. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-28wil6210: protect wil_vring_fini_tx in parallel to tx completionsMaya Erez1-0/+14
napi_synchronize is called before releasing the vring, with the assumption that setting txdata->enabled to 0 will prevent handling of this vring in the next scheduled napi. To guarantee this assumption, a memory barrier is added after disabling the txdata. In addition, as the ctx is zeroed in wil_tx_complete after this descriptor is handled (protected by wmb), ctx needs to be checked before releasing this descriptor in wil_vring_free. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-28wil6210: guarantee safe access to rx descriptors shared memoryMaya Erez1-0/+6
add memory barrier after allocating new rx descriptors, before updating the hwtail. This will guarantee that all writes to descriptors (shared memory) are done before committing them to HW. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-28wil6210: fix race conditions between TX send and completionMaya Erez1-0/+20
There are 2 possible race conditions, both are solved by addition of memory barrier: 1. wil_tx_complete reads the swhead to determine if the vring is empty. In case the swhead was updated before the descriptor update was performed in __wil_tx_vring/__wil_tx_vring_tso, the completion loop will not end and as the DU bit may still be set from a previous run, this skb can be handled as completed before it was sent, which will lead to double free of the same SKB. 2. __wil_tx_vring/__wil_tx_vring_tso calculate the number of available descriptors according to the swtail. In case the swtail is updated before memset of ctx to zero is completed, we can handle this descriptor while later on ctx is zeroed. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-26wil6210: print debug message when transmitting while disconnectedMaya Erez1-1/+1
Network stack can try to transmit data while AP / STA is disconnected. Change this print-out to debug level as this should not be handled as error. This patch also adds wil_dbg_ratelimited, used to limit the above print-out. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-03-07wil6210: switch to generated wmi.hLior David1-2/+2
Switch to auto-generated version of wmi.h which is maintained by FW team. This will allow better sync between teams in the future and avoid bugs because of unexpected API changes. The wmi.h will have many differences but most are cosmetic. It also includes these real differences: 1. is_go parameter added to BCON_CTRL and START_PCP commands. 2. max_rx_pl_per_desc added to CFG_RX_CHAIN command. 3. various small API updates that are not currently used by driver. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-03-07wil6210: replay attack detectionVladimir Kondratiev1-0/+63
Check PN for encrypted frames. Maintain PN data for Rx keys, pairwise per TID and group. Print PN's in the debugfs "stations" entry, like: [0] 04:ce:14:0a:3c:3d connected [ 0] ([32] 0 TU) 0x0fe [____________________________|___] total 252 drop 0 (dup 0 + old 0) last 0x000 [ 0] PN [0+]000000000000 [1-]000000000000 [2-]000000000000 [3-]000000000000 [GR] PN [0-]000000000000 [1+]000000000000 [2+]000000000000 [3-]000000000000 Rx invalid frame: non-data 0, short 0, large 0, replay 0 Rx/MCS: 0 110 65 65 65 0 12 0 0 0 0 0 0 [1] 00:00:00:00:00:00 unused [2] 00:00:00:00:00:00 unused [3] 00:00:00:00:00:00 unused [4] 00:00:00:00:00:00 unused [5] 00:00:00:00:00:00 unused [6] 00:00:00:00:00:00 unused [7] 00:00:00:00:00:00 unused Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-02-02wil6210: prevent access to vring_tx_data lock during its initMaya Erez1-5/+21
wil_tx_vring locks the vring_tx_data lock before accessing the TX vring to check if it is enabled and valid for use. In case of quick disconnect / connect events for the same station, spin_lock(&txdata->lock) can be called during the lock initialization in the vring init function. To prevent such a race, the TX vrings spin lock should be initialized once during wil6210 driver initialization. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-01-26wil6210: handle multiple connect/disconnect eventsMaya Erez1-0/+3
In the current solution wil6210 configures the vring in a worker and holds only one pending CID. This implementation may lead to race conditions between connect and disconnect events of multiple stations or fast connect/disconnect events of the same station. In order to allow the removal of the connect worker and handling of WMI_VRING_CFG_DONE_EVENTID in the connect event, the WMI replies that provide the reply in a given buffer needs to be handled immediately in the WMI event interrupt thread. To prevent deadlocks, WMI replies that requires additional handling are still handled via the events list. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-01-26wil6210: find TX vring only if vring_tx_data is enabledMaya Erez1-5/+12
In TX vring allocation, vring_tx->va is allocated before WMI command to configure the vring is sent to the device. As the WMI command can take time to complete, it can lead to scenarios where vring_tx->va is not NULL but vring is still not enabled. This patch adds a check that vring_tx_data is enabled before returning a valid TX vring. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-16wil6210: hold wil->mutex while managing vringsVladimir Kondratiev1-1/+4
To prevent race when connect flow may run in parallel with the disconnect event. Scenario leading to the bug is: while running connect flow on the AP, STA sends disconnect. log follows. <7>[ 668.736269] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Configure for connection CID 1 <7>[ 668.736269] wil6210 0000:01:00.0: wlan0: DBG[MISC]wil_vring_init_tx() max_mpdu_size 2048 <7>[ 668.736301] wil6210 0000:01:00.0: wlan0: DBG[MISC]wil_vring_alloc() <7>[ 668.736363] wil6210 0000:01:00.0: wlan0: DBG[MISC]vring[1024] 0xffbe8000:d962ce08 0xdb244000 <7>[ 668.736394] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Head 0x00880300 -> 0x00880308 <7>[ 668.736394] wil6210 0000:01:00.0: wlan0: DBG[ WMI]WMI command 0x0821 [28] <7>[ 668.736426] DBG[ WMI]Cmd 00000000: 20 00 24 00 00 00 00 00 00 00 21 08 00 00 00 00 .$.......!..... <7>[ 668.736426] DBG[ WMI]cmd 00000000: 00 00 00 00 00 00 5f 5c 00 00 00 00 00 04 00 08 ......_\........ <7>[ 668.736457] DBG[ WMI]cmd 00000010: 01 01 00 00 00 00 00 00 00 00 ff 0f ............ <7>[ 668.736488] wil6210 0000:01:00.0: wlan0: DBG[ IRQ]Pseudo IRQ 0x00000004 <7>[ 668.736519] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Handle WMI 0x1824 (reply_id 0x1821) <7>[ 668.736519] wil6210 0000:01:00.0: wlan0: DBG[ IRQ]wil6210_mask_irq_pseudo() <7>[ 668.736519] wil6210 0000:01:00.0: wlan0: DBG[ IRQ]ISR MISC 0x20000000 <7>[ 668.736551] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Handle WMI 0x1003 (reply_id 0x1821) <7>[ 668.736551] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Disconnect 04:ce:14:00:07:70 reason [proto 3 wmi 4] <7>[ 668.736582] wil6210 0000:01:00.0: wlan0: DBG[MISC]wil6210_disconnect() <7>[ 668.736613] wil6210 0000:01:00.0: wlan0: DBG[ IRQ]Thread IRQ <7>[ 668.736613] wil6210 0000:01:00.0: wlan0: DBG[ IRQ]Thread ISR MISC 0x20000000 <7>[ 668.736644] wil6210 0000:01:00.0: wlan0: DBG[ IRQ]MBOX event <7>[ 668.736644] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Mbox head 00880330 tail 00880328 <7>[ 668.736676] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Mbox evt 001a 0010 0000 00 <7>[ 668.736676] wil6210 0000:01:00.0: wlan0: DBG[ WMI]WMI event 0x1821 MID 0 @3255145 msec <7>[ 668.736707] DBG[ WMI]evt 00000000: 1a 00 10 00 00 00 00 10 00 00 21 18 69 ab 31 00 ..........!.i.1. <7>[ 668.736707] DBG[ WMI]evt 00000010: 01 01 00 00 00 00 00 00 ........ <7>[ 668.736738] wil6210 0000:01:00.0: wlan0: DBG[ WMI]queue_work -> 0 <7>[ 668.736738] wil6210 0000:01:00.0: wlan0: DBG[ WMI]wmi_recv_cmd -> 1 events queued <7>[ 668.736769] wil6210 0000:01:00.0: wlan0: DBG[ IRQ]wil6210_unmask_irq_pseudo() <7>[ 668.736832] wil6210 0000:01:00.0: wlan0: DBG[MISC]Disconnect 04:ce:14:00:07:70, CID=1, reason=3 <7>[ 668.736832] wil6210 0000:01:00.0: wlan0: DBG[MISC]wil_disconnect_cid(CID 1, status 1) <7>[ 668.736894] wil6210 0000:01:00.0: wlan0: DBG[MISC]wil_vring_fini_tx() id=1 <7>[ 668.736894] wil6210 0000:01:00.0: wlan0: DBG[MISC]free Tx vring 1 [1024] 0xffbe8000:d962ce08 0xdb244000 <7>[ 668.736957] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Handle WMI 0x1821 (reply_id 0x1821) <7>[ 668.736988] wil6210 0000:01:00.0: wlan0: DBG[ WMI]Complete WMI 0x1821 <7>[ 668.737019] wil6210 0000:01:00.0: wlan0: DBG[ WMI]wmi_call(0x0821->0x1821) completed in 0 msec <3>[ 668.737019] wil6210 0000:01:00.0: wlan0: Tx config failed, status 0x01 <7>[ 668.739518] wil6210 0000:01:00.0: wlan0: DBG[MISC]wil_cfg80211_del_station(04:ce:14:00:07:70, reason=2) <7>[ 668.739550] wil6210 0000:01:00.0: wlan0: DBG[MISC]wil6210_disconnect() <7>[ 668.739550] wil6210 0000:01:00.0: wlan0: DBG[MISC]_wil6210_disconnect(bssid=04:ce:14:00:07:70, reason=2, ev-) <7>[ 668.739581] wil6210 0000:01:00.0: wlan0: DBG[MISC]Disconnect 04:ce:14:00:07:70, CID=-2, reason=2 <7>[ 668.742705] wil6210 0000:01:00.0: wlan0: DBG[MISC]free Tx vring 1 [1024] 0x (null):d962ce08 0x (null) <3>[ 668.742736] __dma_free_remap: trying to free invalid coherent area: (null) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29wil6210: Fix TSO overflow handlingHamad Kadmany1-15/+15
When Tx ring full is encountered with TSO, printout of "DMA error" was wrongly printed. In addition, in case of Tx ring full return proper error code so that NETDEV_TX_BUSY is returned to network stack in order not to drop the packets and retry transmission of the packets when ring is emptied. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-09wil6210: ratelimit Tx error messageVladimir Kondratiev1-1/+1
Situations observed when IP stack schedules lots of frames for Tx while no connection (connection lost, for example). In this case, dmesg bloated with error message "FW not connected", printed for every frame. Ratelimit this error message to avoid dmesg pollution. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-09wil6210: support BAR (BlockAck Req)Vladimir Kondratiev1-6/+34
BAR frames delivered to the host via Rx path; whole BAR frame get delivered. Advance sequence in the reorder buffer and release old frames, as per IEEE802.11 spec. Firmware will reply to BAR, driver responsibility is only reorder buffer management. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-09wil6210: Add proper handling for invalid frames on RxVladimir Kondratiev1-7/+13
On Rx, when invalid frame is received and dropped, reaping of next frames from Rx ring is stopped. This stops NAPI polling and re-enables the Rx interrupt. However, in cases where no more frames received, interrupt will not be triggered and rest of Rx frames will not be processed. Skip bad frames and continue to reap Rx packets when such frames are encountered, and add statistics for such frames for debug. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: allow to handle Rx on 2 coresVladimir Shulman1-0/+8
Allow network stack part of Rx processing to run on separate core, relaxing CPU utilization on the core used for Rx NAPI. If RXHASH feature is enabled, the driver sets rxhash of each skb to 1 to enable RPS. The core for processing the rx skb is determined by RPS mechanism according to rx_cpus bit mask which is configured at user level. For processing skbs on different core from the core which processes the interrupts, it is recommended not to enable core 0 in rx_cpus bit mask. Signed-off-by: Vladimir Shulman <QCA_shulmanv@QCA.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: use inline functions for register accessVladimir Kondratiev1-3/+3
Replace macros like "R", "W", "S", "C", defined multiple times, with inline functions "wil_[rwsc]". Use "readl" and "writel" instead of "ioread32" and "iowrite32" since it is granted that memory transactions are used, not port ones like IN/OUT Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: TSO implementationVladimir Kondratiev1-11/+360
Driver report supported TSO (v4 & v6) and IP checksum offload in addition to previously supported features. In data path skbs are checked for non-zero gso_size, and when detected sent to additional function for processing TSO SKBs. Since HW does not fully support TSO, additional effort is required from the driver. Driver partitions the data into mss sized descriptors which are then DMAed to the HW. Signed-off-by: Vladimir Shulman <QCA_shulmanv@QCA.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-06-09wil6210: add per-MCS Rx statsVladimir Kondratiev1-0/+2
Provide detailed statistics for the Rx frames per MCS Statistics printed in "stations" debugfs entry Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-05-04wil6210: broadcast for secure linkVladimir Kondratiev1-21/+25
Introduce 2 types of GTK, Tx (for this STA) and Rx (for each peer). Now, AP has only Tx GTK, STA - only Rx one. PBSS not supported yet; for it, continue using pseudo-DMS. Handle per-vring .1x state, update it from WMI_VRING_EN_EVENTID event. This allows unification for unicast and broadcast vrings. This mechanism replaces former per-CID "data_port_open" Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-05-04wil6210: update Rx descriptor fieldsVladimir Kondratiev1-1/+1
Rx descriptor fields accordingly to the updated hardware documentation Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-20wil6210: fall back to pseudo-DMS mcast for secure link and PBSSVladimir Kondratiev1-2/+101
Multicast is not yet properly supported for all connection types; actually, only non-secure AP is supported. For all other cases, fall back to old "pseudo-DMS" approach. Namely, for: - PBSS - secure connection When re-routing MCAST Rx->Tx on the AP, do not Tx back to the origin of the frame Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20wil6210: implement broadcast/multicast dataVladimir Kondratiev1-69/+106
Use dedicated vring for multicast frames; this vring allocated for AP and PBSS (both P2P GO and client) configurations For short frames, use MCS0; for long - MCS1 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20wil6210: Align Rx frames on 4*n+2 by having SNAPVladimir Kondratiev1-3/+24
For the networking code and for hardware network accelerators, it is better to have IP header 4*n aligned. On the other side, DMA on Rx path require buffer to be aligned on 4*n as well. Having 14 bytes of Ethernet header, these 2 alignment requests are in contradiction. To solve this, order hardware offload block to not remove SNAP header. This adds extra 6 bytes between addresses and ethertype, making it 20 bytes total. This way, both buffer and IP header are 4*n aligned. Remaining is only to remove SNAP by shifting addresses 6 bytes. This involves data copying, so this feature should be disabled unless required by the platform. Module parameter "rx_align_2" (bool, default - false) introduced to control this feature. Feature is completely disabled when parameter is false. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20wil6210: optimize index manipulation in wil_vring_reap_rxVladimir Kondratiev1-6/+11
Use temporal variable for often used vring->swhead; and use proper index in debug printing - vring->swhead used before was modified in wil_vring_advance_head and then increased value was used in debug print Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-13wil6210: support AP isolationVladimir Kondratiev1-1/+1
For the AP, configuration may say not to bridge traffic between wireless clients. This is conveyed from user space (ex: hostapd has ap_isolate parameter) with NL80211_CMD_SET_BSS, to the driver's cfg80211 ops method change_bss Add support for this setting. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-13wil6210: re-submit Rx frames to the wireless media if appropriateVladimir Kondratiev1-14/+58
This is for AP only. If Rx data frame targeted to one of associated clients, transmit it back to the wireless media and don't deliver to the host. For the multicast frames, deliver to both host and wireless media. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-27wil6210: Change of threshold for tx vring idleness measurementVladimir Shulman1-17/+35
Change threshold to be variable debugfs entry from hard-coded 0. Default threshold value is 16 descriptors because HW is capable of fetching up to 16 descriptors at once. Signed-off-by: Vladimir Shulman <qca_shulmanv@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-27wil6210: branch prediction hintsVladimir Kondratiev1-20/+20
Mark expected branches using likely()/unlikely(). Do it on high performance route - data path and interrupts Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-27wil6210: enable fix for HW bug in 802.11->803.3 transformVladimir Kondratiev1-31/+0
In the old hardware, bug existed that caused DA and SA for every Rx packet to be swapped in the AP mode. New hardware has fix for this bug. Enable this fix in the hardware. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-03wil6210: more Tx debugVladimir Kondratiev1-13/+17
Print Tx descriptors Print ring index for all Tx related messages Sort prefixes: Tx for transmit, TxC for completion, added "D" for descriptor related prints Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-03wil6210: fix race between xmit and Tx vring de-allocationVladimir Kondratiev1-3/+22
Use spinlock, this should not impact Tx as lock is always free except for de-allocation. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-03wil6210: avoid Tx descriptor double writeVladimir Kondratiev1-3/+1
Non-cacheable Tx descriptor for the last fragment of multi-fragment frame used to be written back twice. Refactor code to always write non-cacheable descriptor only once Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-03wil6210: remove old Tx work-aroundVladimir Kondratiev1-3/+0
In the Tx, work around used to force destination index 0 to be used. This is no more necessary, as firmware supports multiple destinations Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29wil6210: implement skb Tx status reportingVladimir Kondratiev1-2/+17
Implement Tx status reporting using skb_complete_wifi_ack(). Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: Tx/Rx descriptors documentationVladimir Kondratiev1-1/+1
Sync documentation for the Tx/Rx descriptors with the firmware/hardware documentation. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: fix reordering for MCASTVladimir Kondratiev1-7/+1
In the reordering block, Ethernet DA was checked for MCAST, this is wrong. Check instead MCAST indication from 802.11 MAC header. Hardware saves this into Rx descriptor. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: fix Tx VRING for STA modeVladimir Kondratiev1-5/+41
In STA mode, all Tx should be directed to the same VRING towards the AP. Thus, look up for the 1-st eligible VRING and use it. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: use bitmap API for "status"Vladimir Kondratiev1-3/+3
wil->status used as bitmap; use DECLARE_BITMAP for it. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: fix max. MPDU sizeVladimir Kondratiev1-1/+1
When configuring Tx/Rx VRING's, driver need to specify max. MPDU size It should take into account all overhead introduced by 802.3->208.11 transformation. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: allow to configure ADDBA requestVladimir Kondratiev1-2/+2
For manual ADDBA configuration, allow to set desired window size or disable automatic mechanism. Introduce module parameter (int) agg_wsize. It can be changed on run time, will be taken into account on the next connect. Interpretation: - <0 - disable automatic ADDBA; intended for manual testing through debugfs - 0 - use automatically calculated window size - >0 - use this for window size. Clipped by maximum supported by the hardware with current environment. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: simple ADDBA on originator (Tx) sideVladimir Kondratiev1-0/+4
Upon Tx vring creation, initiate BACK establishment with maximum possible window size. When establishing secure connection, there is EAPOL data exchange between connection itself and "data port open", where security is done and non-EAPOL data may be transferred. It is better to send EAPOL frames using normal ACK because of firmware considerations. send ADDBA only is 2 conditions met: - data port open for the corresponded STA - vring created Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: ADDBA/DELBA flowsVladimir Kondratiev1-1/+1
Introduce BACK establishment procedures; decision logic is not implemented yet; debugfs entry 'addba' used to manually trigger addba/delba for ringid 0. debugfs usage: to establish BACK with agg_wsize 16: echo 16 > /sys/kernel/debug/ieee80211/phy0/wil6210/addba to delete BACK: echo 0 > /sys/kernel/debug/ieee80211/phy0/wil6210/addba to change agg_wsize, one need to delete BACK and establish it anew ADDBA flow for: - originator Tx side (initiator) sends WMI_VRING_BA_EN_CMDID providing agg_wsize and timeout parameters. Eventually, it gets event confirming BACK agreement - WMI_BA_STATUS_EVENTID with negotiated parameters. On this event, update Tx vring data (struct vring_tx_data) and display BACK parameters on debugfs - recipient Rx side (recipient) firmware informs driver about ADDBA with WMI_RCP_ADDBA_REQ_EVENTID, driver process it in service work queue wq_service. It adjusts parameters and sends response with WMI_RCP_ADDBA_RESP_CMDID, and final confirmation provided by firmware with WMI_ADDBA_RESP_SENT_EVENTID. In case of success, driver updates Rx BACK reorder buffer. policy for BACK parameters: - aggregation size (agg_wsize * MPDUsize)) to not exceed 64Kbytes DELBA flow for: - originator driver decides to terminate BACK, it sends WMI_VRING_BA_DIS_CMDID and updates struct vring_tx_data associated with vring; ignore WMI_DELBA_EVENTID. - recipient firmware informs driver with WMI_DELBA_EVENTID, driver deletes correspondent reorder buffer ADDBA request processing requires sending WMI command, therefore it is processed in work queue context. Same work queue used as for connect, it get renamed to wq_service Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-12-01wil6210: remove TODO wrt buffer alignmentVladimir Kondratiev1-2/+0
Hardware doesn't place any restrictions on the buffer alignment, consider this TODO resolved. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01wil6210: Rate limit "ring full" error messageVladimir Kondratiev1-2/+3
In the wil_tx_ring, error message printed when tx attempted while vring has no space to accommodate all fragments of frame. Normally, such situation handled by stopping tx queue. But, if tx queue is by-passed (like pktgen does), this error will be triggered at high rate and dmesg will be flooded with this message. Whole system may become unstable and hang with no possible recover except power cycle. Rate-limit it to prevent dmesg flooding. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01wil6210: configurable vring sizesVladimir Kondratiev1-2/+2
Allow to configure VRING size for both Rx and Tx via module parameters: rx_ring_order and tx_ring_order. Parameters are ring size orders, i.e. ring size calculated as 1 << order. Defaults for both Tx and Rx are order 9, i.e. size 512 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30wil6210: Add support for large packetsVladimir Kondratiev1-3/+4
It is possible to configure driver using mtu_max module parameter by setting it to value in range of 68..7920 inclusive. This is sub-optimal performance-wise in case packet is larger than 1 page. mtu_max default value is 2228. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: enlarge TX/RX buffer lengthVladimir Kondratiev1-1/+2
HW supports upto 2304 packet size on the air. HW is responsible for adding (Tx) or removing (Rx) the following headers: 802.11 hdr: 26B SNAP: 8B CRC: 4B Security (optional): 24B HW adds max 62B to the payload passed from driver. It means driver can use max packet size of 2304-62 = 2242B Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.