aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)AuthorFilesLines
2014-06-19wil6210: fix disconnect handling for APVladimir Kondratiev1-5/+13
For the AP-like interface, if "disconnect all" requested, every station should be deleted with cfg80211_del_sta(). Implement this behavior. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19wil6210: avoid dmesg pollution by Tx errorsVladimir Kondratiev1-2/+2
On Tx path, when vring for the destination not found, it was considered as error and message was printed unconditionally. However, this situation is normal after disconnect. If disconnect was while heavy traffic load, lots of Tx packets will be dropped and this would cause significant amount of prints in dmesg. Demote messages priority from 'error' to 'debug'. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19wil6210: Debug print GRO Rx resultVladimir Kondratiev1-0/+11
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19wil6210: add 'freq' and 'link' debugfs entriesVladimir Kondratiev3-2/+80
Expose operational frequency and link info Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19wil6210: Use "name = value" format in the debugfsVladimir Kondratiev1-2/+2
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19wil6210: debug print when scan request state changesVladimir Kondratiev3-0/+6
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19wil6210: print error when notifying about FW errorVladimir Kondratiev1-0/+1
Print to dmesg when FW error notification is about to be sent Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19wil6210: writeable ITR registersVladimir Kondratiev1-3/+3
Interrupt threshold registers may be written to. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19wil6210: debugfs interface to send raw WMI commandVladimir Kondratiev1-0/+41
Debug aid Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19wil6210: BACK: track last dropped SSNVladimir Kondratiev3-1/+3
Track and print on debugfs Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19wil6210: Allow driver load if FW not readyVladimir Kondratiev1-0/+6
Usable for debugging, to be able to obtain FW traces Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19wil6210: Tx performance monitoringVladimir Kondratiev3-4/+23
For performance monitoring, trace time intervals when Tx vring is idle/not idle. Use CPU cycle counter for this, because jiffies is too rough, and other precise time measurement methods involve overhead while get_cycles() should be fast. This used to provide some estimation for percentage when Tx vring was idle, i.e. when hardware is under-utilized. Estimation is not precise because of many reasons - CPU frequency scaling, grt_cycles() may be per core etc. But still, it is good estimation Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19wil6210: more debug info for vringVladimir Kondratiev2-2/+11
print used/available counters on debugfs; print to dmesg when Tx vring becomes empty This aids with performance investigation Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19wil6210: print more info about BSS foundVladimir Kondratiev1-0/+11
print essential info to dmesg Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19wil6210: trace wil->status on debugfsVladimir Kondratiev1-0/+22
For debug purposes Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19wil6210: print debug info when starting APVladimir Kondratiev1-1/+42
In the wil_cfg80211_start_ap(), debug print selected data: - beacon (before and after fix-up) - crypto parameters - mark start/stop AP invocation Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19wil6210: indicate mgmt_tx statusVladimir Kondratiev1-4/+9
Inform cfg80211 about Tx result Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19wil6210: Tx mgmt frame from debugfsVladimir Kondratiev3-4/+86
Provide 2 files on the debugfs: - "rxon": write channel (1..4) to open Rx on it, 0 to rxoff - "tx_mgmt": write binary frame, starting from MAC header one need to care about turning receiver on/off before/after tx_mgmt Correct sequence is: echo $channel > rxon cat mfmt_frame > tx_mgmt echo 0 > rxon Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Advertise multichannel supportRajkumar Manoharan1-2/+20
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: use separate HW queue for each channel contextRajkumar Manoharan4-7/+63
Use seperate tx queue for each AC in each channel context and expose these information to mac80211 to avoid stopping one channel context leads to stopping the entire traffic for that AC even on other contexts. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Add recovery mechanism for hw TSF timerFelix Fietkau4-7/+31
Configure the TSF based hardware timer for a channel switch. Also set up backup software timer, in case the gen timer fails. This could be caused by a hardware reset. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Update channel switch timerFelix Fietkau1-0/+11
TSF time might have been updated by the incoming beacon, need update the channel switch timer to reflect the change. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Handle beacon miss on multi channel contextFelix Fietkau2-4/+27
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Add periodic NoA supportFelix Fietkau3-8/+44
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Add multi-channel scheduling supportFelix Fietkau3-4/+99
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Implement mgd_prepare_txFelix Fietkau3-8/+46
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Adjust AP beacon tsf based on station contextFelix Fietkau3-0/+55
In multi channel context (AP + STA case), adjust the TSF time of the AP chanctx to keep its beacons at half beacon interval offset relative to the STA chanctx. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: switch channel after sending beaconFelix Fietkau1-1/+2
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Add p2p go NoA attributeFelix Fietkau4-5/+80
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Store current offchannel durationRajkumar Manoharan2-9/+20
Update current offchannel duration during scan or roc request. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: switch channel context for beaconingFelix Fietkau5-5/+126
Add a basic state machine for switch channel context for beacon transmission. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Summarize hw state per channel contextRajkumar Manoharan4-157/+183
Group and set hw state (opmode, primary_sta, beacon conf) per channel context instead of whole list of vifs. This would allow each channel context to run in different mode (STA/AP). Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Move beacon config to channel contextRajkumar Manoharan7-12/+12
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: save tsf in channel contextFelix Fietkau5-5/+37
Save TSF in channel context for multiple operating channels. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Add ATH_OP_MULTI_CHANNELFelix Fietkau2-0/+14
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Move caldata into channel contextFelix Fietkau4-5/+5
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Fetch appropriate operating channel contextRajkumar Manoharan3-24/+34
Retrieve appropriate operating channel context while switching between operating and off channels. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Implement channel context opsFelix Fietkau4-12/+102
Add channel context operations (add, remove, change, assign and unassign) to enable support for multiple channels. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Implement remain-on-channal supportFelix Fietkau4-15/+124
Add remain on channel support in order to enable multi-channel concurrency. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Implement hw_scan supportFelix Fietkau6-2/+255
Implement hw_scan support for enabling multi-channel cuncurrency. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: send powersave frame on channel switchFelix Fietkau3-0/+106
While leaving from or entering to active channel context, send out nullfunc frame to inform to the AP about the presence of station. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: channel context based transmissionFelix Fietkau2-4/+23
Force queueing of all frames that belong to a virtual interface on a different channel context, to ensure that they are sent on the correct channel. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Add channel context worker threadFelix Fietkau8-21/+99
The channel context worker is used to switch to next requested channel context. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Move acq to channel contextFelix Fietkau4-28/+63
Add support to maintain per-channel ACs list. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Move txpower limit to channel contextFelix Fietkau5-12/+8
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Add channel context structureFelix Fietkau7-103/+169
The channel context structure is defined to enable multi-channel concurrency support. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds80-2340/+2927
Pull networking updates from David Miller: 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov. 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J Benniston. 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn Mork. 4) BPF now has a "random" opcode, from Chema Gonzalez. 5) Add more BPF documentation and improve test framework, from Daniel Borkmann. 6) Support TCP fastopen over ipv6, from Daniel Lee. 7) Add software TSO helper functions and use them to support software TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia. 8) Support software TSO in fec driver too, from Nimrod Andy. 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli. 10) Handle broadcasts more gracefully over macvlan when there are large numbers of interfaces configured, from Herbert Xu. 11) Allow more control over fwmark used for non-socket based responses, from Lorenzo Colitti. 12) Do TCP congestion window limiting based upon measurements, from Neal Cardwell. 13) Support busy polling in SCTP, from Neal Horman. 14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru. 15) Bridge promisc mode handling improvements from Vlad Yasevich. 16) Don't use inetpeer entries to implement ID generation any more, it performs poorly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits) rtnetlink: fix userspace API breakage for iproute2 < v3.9.0 tcp: fixing TLP's FIN recovery net: fec: Add software TSO support net: fec: Add Scatter/gather support net: fec: Increase buffer descriptor entry number net: fec: Factorize feature setting net: fec: Enable IP header hardware checksum net: fec: Factorize the .xmit transmit function bridge: fix compile error when compiling without IPv6 support bridge: fix smatch warning / potential null pointer dereference via-rhine: fix full-duplex with autoneg disable bnx2x: Enlarge the dorq threshold for VFs bnx2x: Check for UNDI in uncommon branch bnx2x: Fix 1G-baseT link bnx2x: Fix link for KR with swapped polarity lane sctp: Fix sk_ack_backlog wrap-around problem net/core: Add VF link state control policy net/fsl: xgmac_mdio is dependent on OF_MDIO net/fsl: Make xgmac_mdio read error message useful net_sched: drr: warn when qdisc is not work conserving ...
2014-06-04Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial into nextLinus Torvalds2-3/+3
Pull trivial tree changes from Jiri Kosina: "Usual pile of patches from trivial tree that make the world go round" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) staging: go7007: remove reference to CONFIG_KMOD aic7xxx: Remove obsolete preprocessor define of: dma: doc fixes doc: fix incorrect formula to calculate CommitLimit value doc: Note need of bc in the kernel build from 3.10 onwards mm: Fix printk typo in dmapool.c modpost: Fix comment typo "Modules.symvers" Kconfig.debug: Grammar s/addition/additional/ wimax: Spelling s/than/that/, wording s/destinatary/recipient/ aic7xxx: Spelling s/termnation/termination/ arm64: mm: Remove superfluous "the" in comment of: Spelling s/anonymouns/anonymous/ dma: imx-sdma: Spelling s/determnine/determine/ ath10k: Improve grammar in comments ath6kl: Spelling s/determnine/determine/ of: Improve grammar for of_alias_get_id() documentation drm/exynos: Spelling s/contro/control/ radio-bcm2048.c: fix wrong overflow check doc: printk-formats: do not mention casts for u64/s64 doc: spelling error changes ...
2014-06-02ath10k: fix 8th virtual AP interface with DFSBartosz Markowski1-1/+5
Firmware 10.x supports up to 8 virtual AP interfaces, but in a DFS channel it was possible to create only 7 interfaces as ath10k internal creates a monitor interface for DFS. Previous vdev map initialization was missing enough space for 8 + 1 vdevs due to wrong define used and that's why there was no space for 8th interface. Use the correct define TARGET_10X_NUM_VDEVS with 10.x firmware to make it possible to create the 8th virtual interface. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-06-02ath10k: remove unnecessary htt rx corruption checkMichal Kazior1-18/+0
While fixing a bug reported by Avery I went ahead and added a warning suspecting there might be something more to the bug. This ended up with people reporting they see warnings during heavy traffic. This bought me some time and helped me understand the problem better - apparently fw/hw can report a chained msdus as follows: 1 msdu, 1 chained, 1 msdu (0 length). The patch removes the extra check but leaves the other change that fixed the original skb_push panic bug (msdu_chaining was overwritten in an unfortunate way which made the above example to be treated as non-chained case). Reported-by: Yeoh Chun-Yeow <yeohchunyeow@gmail.com> Reported-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.