aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)AuthorFilesLines
2012-09-24ath9k_hw: Update AR9565 initvalsSujith Manoharan1-51/+49
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k_hw: Add antenna diversity group for AR9565Sujith Manoharan2-0/+65
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k: Remove a couple of unused variablesSujith Manoharan1-2/+0
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k: Remove redundant variable assignmentSujith Manoharan1-48/+3
Set main_gaintb and alt_gaintb once instead of zero'ing them in every case. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k_hw: Use HW cap ATH9K_HW_CAP_ANT_DIV_COMBSujith Manoharan1-7/+3
Instead of trying to determine whether antenna diversity is enabled by parsing eeprom data, use ATH9K_HW_CAP_ANT_DIV_COMB which is already filled at init time. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k: update hw_timer_enabled to false when we stop generic timersMohammed Shafi Shajakhan1-5/+9
Update the 'hw_timer_enabled' to 'false' wherever we are stopping hardware generic timers, excecpt the case where we start them again immediately. Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24wireless: ath9k-htc: fix possible use after freeMing Lei1-2/+3
Inside ath9k_hif_usb_firmware_fail(), the instance of 'struct struct hif_device_usb' may be freed by ath9k_hif_usb_disconnect() after complete(&hif_dev->fw_done); But 'hif_dev' is still accessed after the line code above is executed. This patch fixes the issue by not accessing 'hif_dev' after 'complete(&hif_dev->fw_done)' inside ath9k_hif_usb_firmware_fail(). Cc: ath9k-devel@lists.ath9k.org Cc: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com> Cc: Jouni Malinen <jouni@qca.qualcomm.com> Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k: fix queuing MCI work twiceRajkumar Manoharan1-13/+17
Right now MCI work is being queued twice by profile and status updation. Queue MCI work once when it is needed. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k: fill led_pin before drv_startRajkumar Manoharan3-19/+30
Ensure that led pin is filled and set to OFF before starting the driver. With recent changes, drv_start is being called even before led_init is being completed. This is causing led is always OFF on driver load when the interface is UP. This patch splits the led init and fills the led pin before register hw. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k: move coex param updation within mci workRajkumar Manoharan1-11/+9
Update all coex parameters in sigle place. So that we can avoid redoing the same operation in mutiple places and it eases debugging. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k: flush bt profile whenever it is requestedRajkumar Manoharan3-2/+18
Before processing BT profiles or status messages, check whether it is requested to flush BT profile. Otherwise it might increase number of BT profiles that affects the WLAN performance. Also flush the profiles when MCI is recovering from broken rx. After flushing BT profiles, query BT topology to refetch them. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k_hw: fix ar9462 selfgen chainmaskRajkumar Manoharan2-3/+1
When the 9462 is operating in 2G mode and MCI is enabled then reduce the selfgen chain mask to chain 1. Otherwise poor performance was reported at short range at Rx side when COEX is enabled. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k_hw: move 2g5g switch before nfcal startRajkumar Manoharan1-3/+3
During fast channel change, perform 2g5g_switch before starting noisefloor calibration to avoid nfload timeout. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k: Enable SGI correctlySujith Manoharan1-4/+7
Set the driver specific SGI flag based on the station's HT capabilities, otherwise rate control uses the wrong rate. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextJohn W. Linville3-3/+3
2012-09-19cfg80211: constify name parameter to add_virtual_intfJohannes Berg2-3/+3
The name can't be modified by the driver, make it const. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-13Merge commit 'v3.6-rc5' into nextBjorn Helgaas11-16/+27
* commit 'v3.6-rc5': (1098 commits) Linux 3.6-rc5 HID: tpkbd: work even if the new Lenovo Keyboard driver is not configured Remove user-triggerable BUG from mpol_to_str xen/pciback: Fix proper FLR steps. uml: fix compile error in deliver_alarm() dj: memory scribble in logi_dj Fix order of arguments to compat_put_time[spec|val] xen: Use correct masking in xen_swiotlb_alloc_coherent. xen: fix logical error in tlb flushing xen/p2m: Fix one-off error in checking the P2M tree directory. powerpc: Don't use __put_user() in patch_instruction powerpc: Make sure IPI handlers see data written by IPI senders powerpc: Restore correct DSCR in context switch powerpc: Fix DSCR inheritance in copy_thread() powerpc: Keep thread.dscr and thread.dscr_inherit in sync powerpc: Update DSCR on all CPUs when writing sysfs dscr_default powerpc/powernv: Always go into nap mode when CPU is offline powerpc: Give hypervisor decrementer interrupts their own handler powerpc/vphn: Fix arch_update_cpu_topology() return value ARM: gemini: fix the gemini build ... Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c drivers/rapidio/devices/tsi721.c
2012-09-11ath9k: Choose correct LED pin for AR9565Sujith Manoharan1-1/+1
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Rename antenna diversity macrosSujith Manoharan3-54/+50
The register macros for antenna diversity are common for AR9462 and AR9565, rename them. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Handle gentimer termination properlySujith Manoharan1-0/+10
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: add 8 points for 5G temp slopRajkumar Manoharan3-8/+22
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: use peak detection for 5GHzRajkumar Manoharan1-1/+1
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Wait BT calibration to completeRajkumar Manoharan3-2/+19
Whenever BT calibration requested, WLAN has to wait for the calibration to be completed. But right now we defer the waiting which might cause BT calibration to fail. Fix that. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k: Add PCI ID for AR9565Sujith Manoharan1-0/+1
Enable AR9565. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Program correct PLL value for AR9565Sujith Manoharan1-1/+2
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Fix spur mitigation for AR9565Sujith Manoharan2-10/+72
Exclude CCK spur mitigation, freq 2437 for OFDM and add AR9565-specific logic. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k: Set correct max streams for AR9565Sujith Manoharan2-2/+5
Also, set the correct chainmask. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Add AR9565 HW supportSujith Manoharan7-29/+31
Various parts of the code require AR9565 checks, this patch adds them. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Add AR9565 initvalsSujith Manoharan3-8/+1291
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Add version/revision macros for AR9565Sujith Manoharan3-2/+15
And recognize the device in the init path. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11drivers/net/wireless/ath/ath9k/ar9003_mac.c: removes unnecessary semicolonPeter Senna Tschudin1-1/+1
removes unnecessary semicolon Found by Coccinelle: http://coccinelle.lip6.fr/ Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k: Add Generic hardware timer interrupt in debugfsMohammed Shafi Shajakhan2-0/+6
Having generic hardware timer interrupt in debugfs would come handy when we are debugging 3 WIRE BTCOEX issues. Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Read and configure thermocal for AR9462Rajkumar Manoharan2-0/+25
Read and configure thermometer calibration results read from OTP card. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Read and apply thermometer settings from EEPROMRajkumar Manoharan2-0/+41
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_htc: Cancel BTCOEX related work before disabling BTCOEXMohammed Shafi Shajakhan1-1/+1
Before disabling BTCOEX in the h/w cancel all BTCOEX related works. This is similar to the commit in ath9k(c32cdbd8) ath9k: Stop the BTCOEX timers before disabling BTCOEX Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_htc: Add a modparam to enable BTCOEX rather than defaultMohammed Shafi Shajakhan2-0/+14
Enable BTCOEX for WB193(which seems to be the only supported ath9k_htc BTCOEX chipset)only when it is enabled via modparam, rather than enabling it by default. Cc: Vivek Natarajan <nataraja@qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_htc: minor cleanup in ath9k_htc_add_stationMohammed Shafi Shajakhan1-9/+5
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k: Cleanup add/change_interface callbacksMohammed Shafi Shajakhan1-47/+10
*Remove all the checks that will be handled by cfg80211 based on the interface combination advertised. For instance, driver supports at the maximum 8 beaconing interface, while we advertise maximum 8 beaconing interface in the interface combination support. *cfg80211 will take care of not allowing us to add an interface that is not supported by the driver, further if the change_interface changes the old interface to a beaconing interface while we had reached the max limit of 8 beaconing interface, again cfg80211 takes care of this stuff! So remove all these checks. *Beautify placing PS wrappers in the appropriate position. Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k: Remove an obselete function declarationMohammed Shafi Shajakhan1-1/+0
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k: Make use of ath_stop_ani wrapperMohammed Shafi Shajakhan1-1/+1
Additionally it has a neat debug message informing us that we are stopping the ANI algorithm. Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k: Fix BTCOEX timer triggering comparisionMohammed Shafi Shajakhan2-2/+7
Its more correct to convert btcoex_period to 'us' while comparing with btcoex_no_stomp which is in 'us'. Did not find any functionality issues being fixed, as the generic hardware timer triggers are usually refreshed with the newer duty cycle. Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Fix invalid MCI GPM index access/cachingMohammed Shafi Shajakhan1-0/+8
There is a possibility that AR_MCI_GPM_1 register can return 0xdeadbeef and this results in caching of invalid GPM index in ar9003_mci_is_gpm_valid. Ensure we have appropriate checks to avoid this. Cc: xijin luo <xijin@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-10ath9k: make PA linearization optional, disabled by default and fix checksFelix Fietkau5-7/+8
Some checks for PA linearization support checked ATH9K_HW_CAP_PAPRD and some used the EEPROM ops, leading to issues in tx power handling, since those two can be out of sync. Disable the feature by default, since it has been reported that it can cause damage to the rx path under some circumstances. It can now be enabled for testing via debugfs. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-10mac80211: add key flag for management keysJohannes Berg3-3/+3
Mark keys that might be used to receive management frames so drivers can fall back on software crypto for them if they don't support hardware offload. As the new flag is only set correctly for RX keys and the existing IEEE80211_KEY_FLAG_SW_MGMT flag can only affect TX, also rename the latter to IEEE80211_KEY_FLAG_SW_MGMT_TX. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-07Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessJohn W. Linville16-34/+154
2012-09-07ath9k: Fix TX filter usageSujith Manoharan1-1/+1
The TX filter bit for a station would be set by the HW when a frame is not acked. A frame would be completed with ATH9K_TXERR_FILT status only when the corresponding filter bit for the destination station is already set. Currently, un-acknowledged packets are added to the pending queue and retried, but the "clear_dest_mask" bit in the descriptor is set only when the TX status has been ATH9K_TXERR_FILT. This results in packet loss and the log shows: wlan0: dropped TX filtered frame, queue_len=0 PS=0 @4309746071 wlan0: dropped TX filtered frame, queue_len=0 PS=0 @4309746076 wlan0: dropped TX filtered frame, queue_len=0 PS=0 @4309746377 ... ... This issue can be resolved by making sure that the destination mask is cleared when the packet is being retried and the earlier TX status is ATH9K_TXERR_XRETRY. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07ath9k_hw: small optimizationMohammed Shafi Shajakhan3-9/+1
Assign the MCI BT state locally, rather than unnecessarily calling ar9003_mci_state and updating it. Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07wireless: ath9k-htc: only load firmware in needMing Lei2-12/+25
It is not necessary to hold the firmware memory during the whole driver lifetime, and obviously it does waste memory. Suppose there are 4 ath9k-htc usb dongles working, kernel has to consume about 4*50KBytes RAM to cache firmware for all dongles. After applying the patch, kernel only caches one single firmware image in RAM for all ath9k-htc devices just during system suspend/resume cycle. When system is ready for loading firmware, ath9k-htc can request the loading from usersapce. During system resume, ath9k-htc still can load the firmware which was cached in kernel memory before system suspend. Cc: ath9k-devel@lists.ath9k.org Cc: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com> Cc: Jouni Malinen <jouni@qca.qualcomm.com> Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-05ath9k: Fix a crash in 2 WIRE btcoex chipsetsMohammed Shafi Shajakhan1-1/+2
Generic timers for BTCOEX functionality is applicable only for 3 WIRE BTCOEX (and MCI) chipsets. Hence btcoex->no_stomp_timer is allocated only 3 WIRE btcoex chipsets and in all the other cases its NULL. Make sure we stop the generic timer only if 'btcoex->hw_timer_enabled' is true(only if its up and running) Fixes the following crash [68757.020454] BUG: unable to handle kernel NULL pointer dereference at 0000000c [68757.020916] IP: [<f9b055c3>] ath9k_hw_gen_timer_stop+0x13/0x80 [ath9k_hw] [68757.021251] *pde = 00000000 [68757.024384] EIP: 0060:[<f9b055c3>] EFLAGS: 00010082 CPU: 0 [68757.024384] EIP is at ath9k_hw_gen_timer_stop+0x13/0x80 [ath9k_hw] [68757.024384] EAX: d32d0000 EBX: d32d0000 ECX: 00000000 EDX: 00000000 [68757.024384] ESI: e67c24c0 EDI: 00000296 EBP: e137be2c ESP: e137be20 [68757.024384] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [68757.024384] CR0: 8005003b CR2: 0000000c CR3: 00b99000 CR4: 000407d0 [68757.024384] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [68757.024384] DR6: ffff0ff0 DR7: 00000400 [68757.024384] Process kworker/u:2 (pid: 8917, ti=e137a000 task=ea7a6860 task.ti=e137a000) [68757.024384] Stack: [68757.024384] c06c4676 d32d0000 e67c24c0 e137be38 f81c9590 e67c1ca0 e137be40 f81c95d9 [68757.024384] e137be64 f81cd1c5 00000246 00000002 d32d0000 e67c05e0 e67c1ca0 e67c05e0 [68757.024384] 00000000 e137beac f81cdfa0 e137be84 00000246 00000246 e67c1ca0 e67c1ca0 [68757.024384] Call Trace: [68757.024384] [<c06c4676>] ? _raw_spin_lock_irqsave+0x86/0xa0 [68757.024384] [<f81c9590>] ath9k_gen_timer_stop+0x10/0x40 [ath9k] [68757.024384] [<f81c95d9>] ath9k_btcoex_stop_gen_timer+0x19/0x20 [ath9k] [68757.024384] [<f81cd1c5>] ath9k_ps_restore+0x85/0x110 [ath9k] [68757.024384] [<f81cdfa0>] ath9k_config+0x220/0x520 [ath9k] [68757.024384] [<f81cd47d>] ? ath9k_flush+0x15d/0x1b0 [ath9k] [68757.024384] [<f85c7ca5>] ieee80211_hw_config+0x135/0x2c0 [mac80211] [68757.024384] [<f860e3c8>] ieee80211_dynamic_ps_enable_work+0x198/0x5f0 [mac80211] Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Cc: Bala Shanmugam <bkamatch@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-05ath9k_hw: enable PA linearizationFelix Fietkau1-3/+0
This feature had been disabled in ath9k because the code to support it was incomplete, but now the code is in sync with the internal QCA codebase, so it's time to enable it. On many newer devices, the calibration is assumed to be done with PA linearization enabled. Tests with a particular AR933x device showed that the signal emitted at full power was highly distorted and unreliable with PA linearization disabled. With this patch, the signal becomes clear and stability is improved. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.