aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)AuthorFilesLines
2021-02-09ath10k: Fix lockdep assertion warning in ath10k_sta_statisticsAnand K Mistry1-0/+2
ath10k_debug_fw_stats_request just be called with conf_mutex held, otherwise the following warning is seen when lock debugging is enabled: WARNING: CPU: 0 PID: 793 at drivers/net/wireless/ath/ath10k/debug.c:357 ath10k_debug_fw_stats_request+0x12c/0x133 [ath10k_core] Modules linked in: snd_hda_codec_hdmi designware_i2s snd_hda_intel snd_intel_dspcfg snd_hda_codec i2c_piix4 snd_hwdep snd_hda_core acpi_als kfifo_buf industrialio snd_soc_max98357a snd_soc_adau7002 snd_soc_acp_da7219mx98357_mach snd_soc_da7219 acp_audio_dma ccm xt_MASQUERADE fuse ath10k_pci ath10k_core lzo_rle ath lzo_compress mac80211 zram cfg80211 r8152 mii joydev CPU: 0 PID: 793 Comm: wpa_supplicant Tainted: G W 5.10.9 #5 Hardware name: HP Grunt/Grunt, BIOS Google_Grunt.11031.104.0 09/05/2019 RIP: 0010:ath10k_debug_fw_stats_request+0x12c/0x133 [ath10k_core] Code: 1e bb a1 ff ff ff 4c 89 ef 48 c7 c6 d3 31 2e c0 89 da 31 c0 e8 bd f8 ff ff 89 d8 eb 02 31 c0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 <0f> 0b e9 04 ff ff ff 0f 1f 44 00 00 55 48 89 e5 41 56 53 48 89 fb RSP: 0018:ffffb2478099f7d0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9e432700cce0 RCX: 11c85cfd6b8e3b00 RDX: ffff9e432700cce0 RSI: ffff9e43127c5668 RDI: ffff9e4318deddf0 RBP: ffffb2478099f7f8 R08: 0000000000000002 R09: 00000003fd7068cc R10: ffffffffc01b2749 R11: ffffffffc029efaf R12: ffff9e432700c000 R13: ffff9e43127c33e0 R14: ffffb2478099f918 R15: ffff9e43127c33e0 FS: 00007f7ea48e2740(0000) GS:ffff9e432aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000059aa799ddf38 CR3: 0000000118de2000 CR4: 00000000001506f0 Call Trace: ath10k_sta_statistics+0x4d/0x270 [ath10k_core] sta_set_sinfo+0x1be/0xaec [mac80211] ieee80211_get_station+0x58/0x76 [mac80211] rdev_get_station+0xf1/0x11e [cfg80211] nl80211_get_station+0x7f/0x146 [cfg80211] genl_rcv_msg+0x32e/0x35e ? nl80211_stop_ap+0x19/0x19 [cfg80211] ? nl80211_get_station+0x146/0x146 [cfg80211] ? genl_rcv+0x19/0x36 ? genl_rcv+0x36/0x36 netlink_rcv_skb+0x89/0xfb genl_rcv+0x28/0x36 netlink_unicast+0x169/0x23b netlink_sendmsg+0x38a/0x402 sock_sendmsg+0x72/0x76 ____sys_sendmsg+0x153/0x1cc ? copy_msghdr_from_user+0x5d/0x85 ___sys_sendmsg+0x7c/0xb5 ? lock_acquire+0x181/0x23d ? syscall_trace_enter+0x15e/0x160 ? find_held_lock+0x3d/0xb2 ? syscall_trace_enter+0x15e/0x160 ? sched_clock_cpu+0x15/0xc6 __sys_sendmsg+0x62/0x9a do_syscall_64+0x43/0x55 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 4913e675630e ("ath10k: enable rx duration report default for wmi tlv") Signed-off-by: Anand K Mistry <amistry@google.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210202144033.1.I9e556f9fb1110d58c31d04a8a1293995fb8bb678@changeid
2021-02-09ath10k: Fix suspicious RCU usage warning in ath10k_wmi_tlv_parse_peer_stats_info()Anand K Mistry1-0/+3
The ieee80211_find_sta_by_ifaddr call in ath10k_wmi_tlv_parse_peer_stats_info must be called while holding the RCU read lock. Otherwise, the following warning will be seen when RCU usage checking is enabled: ============================= WARNING: suspicious RCU usage 5.10.3 #8 Tainted: G W ----------------------------- include/linux/rhashtable.h:594 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 no locks held by ksoftirqd/1/16. stack backtrace: CPU: 1 PID: 16 Comm: ksoftirqd/1 Tainted: G W 5.10.3 #8 Hardware name: HP Grunt/Grunt, BIOS Google_Grunt.11031.104.0 09/05/2019 Call Trace: dump_stack+0xab/0x115 sta_info_hash_lookup+0x71/0x1e9 [mac80211] ? lock_is_held_type+0xe6/0x12f ? __kasan_kmalloc+0xfb/0x112 ieee80211_find_sta_by_ifaddr+0x12/0x61 [mac80211] ath10k_wmi_tlv_parse_peer_stats_info+0xbd/0x10b [ath10k_core] ath10k_wmi_tlv_iter+0x8b/0x1a1 [ath10k_core] ? ath10k_wmi_tlv_iter+0x1a1/0x1a1 [ath10k_core] ath10k_wmi_tlv_event_peer_stats_info+0x103/0x13b [ath10k_core] ath10k_wmi_tlv_op_rx+0x722/0x80d [ath10k_core] ath10k_htc_rx_completion_handler+0x16e/0x1d7 [ath10k_core] ath10k_pci_process_rx_cb+0x116/0x22c [ath10k_pci] ? ath10k_htc_process_trailer+0x332/0x332 [ath10k_core] ? _raw_spin_unlock_irqrestore+0x34/0x61 ? lockdep_hardirqs_on+0x8e/0x12e ath10k_ce_per_engine_service+0x55/0x74 [ath10k_core] ath10k_ce_per_engine_service_any+0x76/0x84 [ath10k_core] ath10k_pci_napi_poll+0x49/0x141 [ath10k_pci] net_rx_action+0x11a/0x347 __do_softirq+0x2d3/0x539 run_ksoftirqd+0x4b/0x86 smpboot_thread_fn+0x1d0/0x2ab ? cpu_report_death+0x7f/0x7f kthread+0x189/0x191 ? cpu_report_death+0x7f/0x7f ? kthread_blkcg+0x31/0x31 ret_from_fork+0x22/0x30 Fixes: 0f7cb26830a6e ("ath10k: add rx bitrate report for SDIO") Signed-off-by: Anand K Mistry <amistry@google.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210202134451.1.I0d2e83c42755671b7143504b62787fd06cd914ed@changeid
2021-02-08Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo18-133/+257
ath.git patches for v5.12. Major changes: ath10k * support setting SAR limits via nl80211
2021-02-06Merge tag 'wireless-drivers-next-2021-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-nextJakub Kicinski14-84/+214
Kalle Valo says: ==================== wireless-drivers-next patches for v5.12 First set of patches for v5.12. A smaller pull request this time, biggest feature being a better key handling for ath9k. And of course the usual fixes and cleanups all over. Major changes: ath9k * more robust encryption key cache management brcmfmac * support BCM4365E with 43666 ChipCommon chip ID * tag 'wireless-drivers-next-2021-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (35 commits) iwl4965: do not process non-QOS frames on txq->sched_retry path mt7601u: process tx URBs with status EPROTO properly wlcore: Fix command execute failure 19 for wl12xx mt7601u: use ieee80211_rx_list to pass frames to the network stack as a batch rtw88: 8723de: adjust the LTR setting rtlwifi: rtl8821ae: fix bool comparison in expressions rtlwifi: rtl8192se: fix bool comparison in expressions rtlwifi: rtl8188ee: fix bool comparison in expressions rtlwifi: rtl8192c-common: fix bool comparison in expressions rtlwifi: rtl_pci: fix bool comparison in expressions wlcore: Downgrade exceeded max RX BA sessions to debug wilc1000: use flexible-array member instead of zero-length array brcmfmac: clear EAP/association status bits on linkdown events brcmfmac: Delete useless kfree code qtnfmac_pcie: Use module_pci_driver mt7601u: check the status of device in calibration mt7601u: process URBs in status EPROTO properly brcmfmac: support BCM4365E with 43666 ChipCommon chip ID wilc1000: fix spelling mistake in Kconfig "devision" -> "division" mwifiex: pcie: Drop bogus __refdata annotation ... ==================== Link: https://lore.kernel.org/r/20210205161901.C7F83C433ED@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04ath11k: remove h from printk format specifierTom Rix4-13/+13
This change fixes the checkpatch warning described in this commit commit cbacb5ab0aa0 ("docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]") Standard integer promotion is already done and %hx and %hhx is useless so do not encourage the use of %hh[xudi] or %h[xudi]. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210128144928.2557605-1-trix@redhat.com
2021-02-04ath10k: remove h from printk format specifierTom Rix7-36/+36
This change fixes the checkpatch warning described in this commit commit cbacb5ab0aa0 ("docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]") Standard integer promotion is already done and %hx and %hhx is useless so do not encourage the use of %hh[xudi] or %h[xudi]. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210127222344.2445641-1-trix@redhat.com
2021-01-28ath9k: fix build error with LEDS_CLASS=mArnd Bergmann1-6/+2
When CONFIG_ATH9K is built-in but LED support is in a loadable module, both ath9k drivers fails to link: x86_64-linux-ld: drivers/net/wireless/ath/ath9k/gpio.o: in function `ath_deinit_leds': gpio.c:(.text+0x36): undefined reference to `led_classdev_unregister' x86_64-linux-ld: drivers/net/wireless/ath/ath9k/gpio.o: in function `ath_init_leds': gpio.c:(.text+0x179): undefined reference to `led_classdev_register_ext' The problem is that the 'imply' keyword does not enforce any dependency but is only a weak hint to Kconfig to enable another symbol from a defconfig file. Change imply to a 'depends on LEDS_CLASS' that prevents the incorrect configuration but still allows building the driver without LED support. The 'select MAC80211_LEDS' is now ensures that the LED support is actually used if it is present, and the added Kconfig dependency on MAC80211_LEDS ensures that it cannot be enabled manually when it has no effect. Fixes: 197f466e93f5 ("ath9k_htc: Do not select MAC80211_LEDS by default") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210125113654.2408057-1-arnd@kernel.org
2021-01-28ath10k: fix wmi mgmt tx queue full due to race conditionMiaoqing Pan1-11/+4
Failed to transmit wmi management frames: [84977.840894] ath10k_snoc a000000.wifi: wmi mgmt tx queue is full [84977.840913] ath10k_snoc a000000.wifi: failed to transmit packet, dropping: -28 [84977.840924] ath10k_snoc a000000.wifi: failed to submit frame: -28 [84977.840932] ath10k_snoc a000000.wifi: failed to transmit frame: -28 This issue is caused by race condition between skb_dequeue and __skb_queue_tail. The queue of ‘wmi_mgmt_tx_queue’ is protected by a different lock: ar->data_lock vs list->lock, the result is no protection. So when ath10k_mgmt_over_wmi_tx_work() and ath10k_mac_tx_wmi_mgmt() running concurrently on different CPUs, there appear to be a rare corner cases when the queue length is 1, CPUx (skb_deuque) CPUy (__skb_queue_tail) next=list prev=list struct sk_buff *skb = skb_peek(list); WRITE_ONCE(newsk->next, next); WRITE_ONCE(list->qlen, list->qlen - 1);WRITE_ONCE(newsk->prev, prev); next = skb->next; WRITE_ONCE(next->prev, newsk); prev = skb->prev; WRITE_ONCE(prev->next, newsk); skb->next = skb->prev = NULL; list->qlen++; WRITE_ONCE(next->prev, prev); WRITE_ONCE(prev->next, next); If the instruction ‘next = skb->next’ is executed before ‘WRITE_ONCE(prev->next, newsk)’, newsk will be lost, as CPUx get the old ‘next’ pointer, but the length is still added by one. The final result is the length of the queue will reach the maximum value but the queue is empty. So remove ar->data_lock, and use 'skb_queue_tail' instead of '__skb_queue_tail' to prevent the potential race condition. Also switch to use skb_queue_len_lockless, in case we queue a few SKBs simultaneously. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1.c2-00033-QCAHLSWMTPLZ-1 Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608618887-8857-1-git-send-email-miaoqing@codeaurora.org
2021-01-28ath10k: pass the ssid info to get the correct bss entityWen Gong1-1/+2
When connect to an AP with WPA mode, ath10k need to set need_ptk_4_way to firmware in WMI_PEER_ASSOC_CMD, then the data path is disallow in firmware, it will be allowed untill firmware finish the 4 way handshake. It failed with a test case with below steps: 1. configure AP with WPA mode with ssid1 SimpleConnect_a_orbvt_ch1, bssid1 and channel 1. 2. connect to ssid1 and ping success. 3. wait 10 seconds which is less than IEEE80211_SCAN_RESULT_EXPIRE(30 seconds). 4. configure AP with OPEN mode with ssid2 SimpleConnect_b_z3a00_ch1, but use same bssid1 and channel 1 of step 1. 5. disconnect ssid1. 6. connect to ssid2 and ping fail. Fail reason: When run step 6, ath10k_peer_assoc_h_crypto() called cfg80211_get_bss() with bssid and chan info, but ssid1 and ssid2 have the same bssid and channel, then there have 2 entry for ssid1 and ssid2 in cfg80211. The ssid1's order is before ssid2 in bss_list, and ssid1's age is less than the expire time which is IEEE80211_SCAN_RESULT_EXPIRE(30 seconds). Then ssid1's entry is selected and ath10k_peer_assoc_h_crypto() parsed it and get the rsnie and then need_ptk_4_way is set to firmware, so data path is disallowed and it will not receive 4 way handshake for OPEN mode, so ping fail in step 6. This patch is to pass the ssid info to cfg80211_get_bss() as same as cfg80211_mlme_assoc() and cfg80211_mlme_auth(), then it will find the correct bss entry in above test case, then case success. For AP mode, the ssid info is filled in ieee80211_start_ap(), for STATION mode, it is filled in ieee80211_mgd_assoc(). Tested for both AP/STATION mode with QCA6174 hw3.2 PCI, it is success start/connect/ping for WPA/OPEN mode. Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607312195-3583-3-git-send-email-wgong@codeaurora.org
2021-01-28ath10k: allow dynamic SAR power limits via common APICarl Huang4-59/+192
ath10k assigns ath10k_mac_set_sar_specs to ath10k_ops, and this function is called when user space application calls NL80211_CMD_SET_SAR_SPECS. ath10k also registers SAR type, and supported frequency ranges to wiphy so user space can query SAR capabilities. This SAR power limitation is compared to regulatory txpower and selects the minimal one to set when station is connected. Otherwise, it delays until the station is connected. If the station is disconnected, it returns to regulatory txpower. This feature is controlled by hw parameter: dynamic_sar_support. Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Abhishek Kumar <kuabhs@chromium.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201203103728.3034-4-cjhuang@codeaurora.org
2021-01-26wcn36xx: Remove unnecessary memsetZheng Yongjun1-1/+0
memcpy operation is next to memset code, and the size to copy is equals to the size to memset, so the memset operation is unnecessary, remove it. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201223012516.24286-1-zhengyongjun3@huawei.com
2021-01-26ath11k: add ieee80211_unregister_hw to avoid kernel crash caused by NULL pointerWen Gong1-2/+5
When function return fail to __ath11k_mac_register after success called ieee80211_register_hw, then it set wiphy->dev.parent to NULL by SET_IEEE80211_DEV(ar->hw, NULL) in end of __ath11k_mac_register, then cfg80211_get_drvinfo will be called by below call stack, but the wiphy->dev.parent is NULL, so kernel crash. Call stack to cfg80211_get_drvinfo: NetworkManager 826 [001] 6696.731371: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0) ffffffffc107d8f1 cfg80211_get_drvinfo+0x1 (/lib/modules/5.10.0-rc1-wt-ath+/kernel/net/wireless-back/cfg80211.ko) ffffffff9d8fc529 ethtool_get_drvinfo+0x99 (vmlinux) ffffffff9d90080e dev_ethtool+0x1dbe (vmlinux) ffffffff9d8b88f7 dev_ioctl+0xb7 (vmlinux) ffffffff9d8668de sock_do_ioctl+0xae (vmlinux) ffffffff9d866d60 sock_ioctl+0x350 (vmlinux) ffffffff9d2ca30e __x64_sys_ioctl+0x8e (vmlinux) ffffffff9da0dda3 do_syscall_64+0x33 (vmlinux) ffffffff9dc0008c entry_SYSCALL_64_after_hwframe+0x44 (vmlinux) 7feb5f673007 __GI___ioctl+0x7 (/lib/x86_64-linux-gnu/libc-2.23.so) 0 [unknown] ([unknown]) Code of cfg80211_get_drvinfo, the pdev which is wiphy->dev.parent is NULL when kernel crash: void cfg80211_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { struct wireless_dev *wdev = dev->ieee80211_ptr; struct device *pdev = wiphy_dev(wdev->wiphy); if (pdev->driver) .... kernel crash log: [ 973.619550] ath11k_pci 0000:05:00.0: failed to perform regd update : -16 [ 973.619555] ath11k_pci 0000:05:00.0: ath11k regd update failed: -16 [ 973.619566] ath11k_pci 0000:05:00.0: failed register the radio with mac80211: -16 [ 973.619618] ath11k_pci 0000:05:00.0: failed to create pdev core: -16 [ 973.636035] BUG: kernel NULL pointer dereference, address: 0000000000000068 [ 973.636046] #PF: supervisor read access in kernel mode [ 973.636050] #PF: error_code(0x0000) - not-present page [ 973.636054] PGD 800000012452e067 P4D 800000012452e067 PUD 12452d067 PMD 0 [ 973.636064] Oops: 0000 [#1] SMP PTI [ 973.636072] CPU: 3 PID: 848 Comm: NetworkManager Kdump: loaded Tainted: G W OE 5.10.0-rc1-wt-ath+ #24 [ 973.636076] Hardware name: LENOVO 418065C/418065C, BIOS 83ET63WW (1.33 ) 07/29/2011 [ 973.636161] RIP: 0010:cfg80211_get_drvinfo+0x25/0xd0 [cfg80211] [ 973.636169] Code: e9 c9 fe ff ff 66 66 66 66 90 55 53 ba 20 00 00 00 48 8b af 08 03 00 00 48 89 f3 48 8d 7e 04 48 8b 45 00 48 8b 80 90 01 00 00 <48> 8b 40 68 48 85 c0 0f 84 8d 00 00 00 48 8b 30 e8 a6 cc 72 c7 48 [ 973.636174] RSP: 0018:ffffaafb4040bbe0 EFLAGS: 00010286 [ 973.636180] RAX: 0000000000000000 RBX: ffffaafb4040bbfc RCX: 0000000000000000 [ 973.636184] RDX: 0000000000000020 RSI: ffffaafb4040bbfc RDI: ffffaafb4040bc00 [ 973.636188] RBP: ffff8a84c9568950 R08: 722d302e30312e35 R09: 74612d74772d3163 [ 973.636192] R10: 3163722d302e3031 R11: 2b6874612d74772d R12: ffffaafb4040bbfc [ 973.636196] R13: 00007ffe453707c0 R14: ffff8a84c9568000 R15: 0000000000000000 [ 973.636202] FS: 00007fd3d179b940(0000) GS:ffff8a84fa2c0000(0000) knlGS:0000000000000000 [ 973.636206] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 973.636211] CR2: 0000000000000068 CR3: 00000001153b6002 CR4: 00000000000606e0 [ 973.636215] Call Trace: [ 973.636234] ethtool_get_drvinfo+0x99/0x1f0 [ 973.636246] dev_ethtool+0x1dbe/0x2be0 [ 973.636256] ? mntput_no_expire+0x35/0x220 [ 973.636264] ? inet_ioctl+0x1ce/0x200 [ 973.636274] ? tomoyo_path_number_perm+0x68/0x1d0 [ 973.636282] ? kmem_cache_alloc+0x3cb/0x430 [ 973.636290] ? dev_ioctl+0xb7/0x570 [ 973.636295] dev_ioctl+0xb7/0x570 [ 973.636307] sock_do_ioctl+0xae/0x150 [ 973.636315] ? sock_ioctl+0x350/0x3c0 [ 973.636319] sock_ioctl+0x350/0x3c0 [ 973.636332] ? __x64_sys_ioctl+0x8e/0xd0 [ 973.636339] ? dlci_ioctl_set+0x30/0x30 [ 973.636346] __x64_sys_ioctl+0x8e/0xd0 [ 973.636359] do_syscall_64+0x33/0x80 [ 973.636368] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Sequence of function call when wlan load for success case when function __ath11k_mac_register return 0: kworker/u16:3-e 2922 [001] 6696.729734: probe:ieee80211_register_hw: (ffffffffc116ae60) kworker/u16:3-e 2922 [001] 6696.730210: probe:ieee80211_if_add: (ffffffffc1185cc0) NetworkManager 826 [001] 6696.731345: probe:ethtool_get_drvinfo: (ffffffff9d8fc490) NetworkManager 826 [001] 6696.731371: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0) NetworkManager 826 [001] 6696.731639: probe:ethtool_get_drvinfo: (ffffffff9d8fc490) NetworkManager 826 [001] 6696.731653: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0) NetworkManager 826 [001] 6696.732866: probe:ethtool_get_drvinfo: (ffffffff9d8fc490) NetworkManager 826 [001] 6696.732893: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0) systemd-udevd 3850 [003] 6696.737199: probe:ethtool_get_drvinfo: (ffffffff9d8fc490) systemd-udevd 3850 [003] 6696.737226: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0) NetworkManager 826 [000] 6696.759950: probe:ethtool_get_drvinfo: (ffffffff9d8fc490) NetworkManager 826 [000] 6696.759967: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0) NetworkManager 826 [000] 6696.760057: probe:ethtool_get_drvinfo: (ffffffff9d8fc490) NetworkManager 826 [000] 6696.760062: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0) After apply this patch, kernel crash gone, and below is the test case's sequence of function call and log when wlan load with fail by function ath11k_regd_update, and __ath11k_mac_register return fail: kworker/u16:5-e 192 [001] 215.174388: probe:ieee80211_register_hw: (ffffffffc1131e60) kworker/u16:5-e 192 [000] 215.174973: probe:ieee80211_if_add: (ffffffffc114ccc0) NetworkManager 846 [001] 215.175857: probe:ethtool_get_drvinfo: (ffffffff928fc490) kworker/u16:5-e 192 [000] 215.175867: probe:ieee80211_unregister_hw: (ffffffffc1131970) NetworkManager 846 [001] 215.175880: probe:cfg80211_get_drvinfo: (ffffffffc107f8f0) NetworkManager 846 [001] 215.176105: probe:ethtool_get_drvinfo: (ffffffff928fc490) NetworkManager 846 [001] 215.176118: probe:cfg80211_get_drvinfo: (ffffffffc107f8f0) [ 215.175859] ath11k_pci 0000:05:00.0: ath11k regd update failed: -16 NetworkManager 846 [001] 215.196420: probe:ethtool_get_drvinfo: (ffffffff928fc490) NetworkManager 846 [001] 215.196430: probe:cfg80211_get_drvinfo: (ffffffffc107f8f0) [ 215.258598] ath11k_pci 0000:05:00.0: failed register the radio with mac80211: -16 [ 215.258613] ath11k_pci 0000:05:00.0: failed to create pdev core: -16 When ath11k_regd_update or ath11k_debugfs_register return fail, function ieee80211_unregister_hw of mac80211 will be called, then it will wait untill cfg80211_get_drvinfo finished, the wiphy->dev.parent is not NULL at this moment, after that, it set wiphy->dev.parent to NULL by SET_IEEE80211_DEV(ar->hw, NULL) in end of __ath11k_mac_register, so not happen kernel crash. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608607824-16067-1-git-send-email-wgong@codeaurora.org
2021-01-26cfg80211: avoid holding the RTNL when calling the driverJohannes Berg6-2/+17
Currently, _everything_ in cfg80211 holds the RTNL, and if you have a slow USB device (or a few) you can get some bad lock contention on that. Fix that by re-adding a mutex to each wiphy/rdev as we had at some point, so we have locking for the wireless_dev lists and all the other things in there, and also so that drivers still don't have to worry too much about it (they still won't get parallel calls for a single device). Then, we can restrict the RTNL to a few cases where we add or remove interfaces and really need the added protection. Some of the global list management still also uses the RTNL, since we need to have it anyway for netdev management, but we only hold the RTNL for very short periods of time here. Link: https://lore.kernel.org/r/20210122161942.81df9f5e047a.I4a8e1a60b18863ea8c5e6d3a0faeafb2d45b2f40@changeid Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> [marvell driver issues] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-22cfg80211: change netdev registration/unregistration semanticsJohannes Berg2-4/+4
We used to not require anything in terms of registering netdevs with cfg80211, using a netdev notifier instead. However, in the next patch reducing RTNL locking, this causes big problems, and the simplest way is to just require drivers to do things better. Change the registration/unregistration semantics to require the drivers to call cfg80211_(un)register_netdevice() when this is happening due to a cfg80211 request, i.e. add_virtual_intf() or del_virtual_intf() (or if it somehow has to happen in any other cfg80211 callback). Otherwise, in other contexts, drivers may continue to use the normal netdev (un)registration functions as usual. Internally, we still use the netdev notifier and track (by the new wdev->registered bool) if the wdev had already been added to cfg80211 or not. Link: https://lore.kernel.org/r/20210122161942.cf2f4b65e4e9.Ida8234e50da13eb675b557bac52a713ad4eddf71@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-18ath10k: remove unused struct ath10k::dev_typeKalle Valo1-1/+0
It's unused so let's get rid of it. Compile tested only, no functional changes. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608574994-30706-1-git-send-email-kvalo@codeaurora.org
2021-01-18ath11k: remove duplicate function declarationKarthikeyan Periyasamy1-8/+0
Removed the duplicated peer related function declaration from core.h since those functions are already declared in peer.h Founded in code review. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608304793-20612-1-git-send-email-periyasa@codeaurora.org
2021-01-18ath10k: increase rx buffer size to 2048Linus Lüssing1-1/+1
Before, only frames with a maximum size of 1528 bytes could be transmitted between two 802.11s nodes. For batman-adv for instance, which adds its own header to each frame, we typically need an MTU of at least 1532 bytes to be able to transmit without fragmentation. This patch now increases the maxmimum frame size from 1528 to 1656 bytes. Tested with two ath10k devices in 802.11s mode, as well as with batman-adv on top of 802.11s with forwarding disabled. Fix originally found and developed by Ben Greear. Link: https://github.com/greearb/ath10k-ct/issues/89 Link: https://github.com/greearb/ath10k-ct/commit/9e5ab25027e0971fa24ccf93373324c08c4e992d Cc: Ben Greear <greearb@candelatech.com> Signed-off-by: Linus Lüssing <ll@simonwunderlich.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200205191043.21913-1-linus.luessing@c0d3.blue
2021-01-18ath10k: sanitity check for ep connectivityZekun Shen1-0/+4
Function ep_rx_complete is being called without NULL checking in ath10k_htc_rx_completion_handler. Without such check, mal- formed packet is able to cause jump to NULL. ep->service_id seems a good candidate for sanity check as it is used in usb.c. Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200622022055.16028-1-bruceshenzk@gmail.com
2021-01-11Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo14-84/+214
ath.git patches for v5.12. Major changes: ath9k * more robust encryption key cache management
2021-01-05wil6210: select CONFIG_CRC32Arnd Bergmann1-0/+1
Without crc32, the driver fails to link: arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o: in function `wil_fw_verify': fw.c:(.text+0x74c): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o:fw.c:(.text+0x758): more undefined references to `crc32_le' follow Fixes: 151a9706503f ("wil6210: firmware download") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-22Merge tag 'wireless-drivers-2020-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-driversJakub Kicinski10-12/+101
Kalle Valo says: ==================== wireless-drivers fixes for v5.11 First set of fixes for v5.11, more fixes than usual this time. For ath11k we have several fixes for QCA6390 PCI support and mt76 has several. Also one build fix for mt76. mt76 * fix two NULL pointer dereference * fix build error when CONFIG_MAC80211_MESH is disabled rtlwifi * fix use-after-free in firmware handling code ath11k * error handling fixes * fix crash found during connect and disconnect test * handle HT disable better * avoid printing qmi memory failure during firmware bootup * disable ASPM during firmware bootup * tag 'wireless-drivers-2020-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers: MAINTAINERS: switch to different email address mt76: mt7915: fix MESH ifdef block mt76: mt76s: fix NULL pointer dereference in mt76s_process_tx_queue mt76: sdio: remove wake logic in mt76s_process_tx_queue mt76: usb: remove wake logic in mt76u_status_worker ath11k: pci: disable ASPM L0sLs before downloading firmware ath11k: qmi: try to allocate a big block of DMA memory first rtlwifi: rise completion at the last step of firmware callback mt76: mt76u: fix NULL pointer dereference in mt76u_status_worker ath11k: Fix ath11k_pci_fix_l1ss() ath11k: Fix error code in ath11k_core_suspend() ath11k: start vdev if a bss peer is already created ath11k: fix crash caused by NULL rx_channel ath11k: add missing null check on allocated skb ==================== Link: https://lore.kernel.org/r/20201222163727.D4336C433C6@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-18ath11k: dp: clean up a variable nameDan Carpenter1-1/+1
The "&ar->ab->base_lock" and "&ab->base_lock" locks are the same lock but it's nicer to use the same name consistently everywhere. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/X9s7QAHDM2OTIo3a@mwanda
2020-12-18ath11k: pci: remove unnecessary mask in ath11k_pci_enable_ltssm()Kalle Valo1-1/+1
0x10 is a leftover and unnecessary, GCC_GCC_PCIE_HOT_RST_VAL is already defined to 0x10. No functional changes, compile tested only. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608143051-5386-1-git-send-email-kvalo@codeaurora.org
2020-12-18ath11k: pci: disable ASPM L0sLs before downloading firmwareCarl Huang2-0/+38
Sometimes QCA6390 doesn't switch to amss state as device enters L1ss state, so disable L0sL1s during firmware downloading. Driver recovers the ASPM to default value in start callback or powerdown callback. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608218530-15426-1-git-send-email-kvalo@codeaurora.org
2020-12-18ath11k: qmi: try to allocate a big block of DMA memory firstCarl Huang2-2/+23
Not all firmware versions support allocating DMA memory in smaller blocks so first try to allocate big block of DMA memory for QMI. If the allocation fails, let firmware request multiple blocks of DMA memory with smaller size. This also fixes an unnecessary error message seen during ath11k probe on QCA6390: ath11k_pci 0000:06:00.0: Respond mem req failed, result: 1, err: 0 ath11k_pci 0000:06:00.0: qmi failed to respond fw mem req:-22 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608127593-15192-1-git-send-email-kvalo@codeaurora.org
2020-12-17ath10k: prevent deinitializing NAPI twiceWen Gong6-12/+41
It happened "Kernel panic - not syncing: hung_task: blocked tasks" when test simulate crash and ifconfig down/rmmod meanwhile. Test steps: 1.Test commands, either can reproduce the hang for PCIe, SDIO and SNOC. echo soft > /sys/kernel/debug/ieee80211/phy0/ath10k/simulate_fw_crash;sleep 0.05;ifconfig wlan0 down echo soft > /sys/kernel/debug/ieee80211/phy0/ath10k/simulate_fw_crash;rmmod ath10k_sdio echo hw-restart > /sys/kernel/debug/ieee80211/phy0/ath10k/simulate_fw_crash;rmmod ath10k_pci 2. dmesg: [ 5622.548630] ath10k_sdio mmc1:0001:1: simulating soft firmware crash [ 5622.655995] ieee80211 phy0: Hardware restart was requested [ 5776.355164] INFO: task shill:1572 blocked for more than 122 seconds. [ 5776.355687] INFO: task kworker/1:2:24437 blocked for more than 122 seconds. [ 5776.359812] Kernel panic - not syncing: hung_task: blocked tasks [ 5776.359836] CPU: 1 PID: 55 Comm: khungtaskd Tainted: G W 4.19.86 #137 [ 5776.359846] Hardware name: MediaTek krane sku176 board (DT) [ 5776.359855] Call trace: [ 5776.359868] dump_backtrace+0x0/0x170 [ 5776.359881] show_stack+0x20/0x2c [ 5776.359896] dump_stack+0xd4/0x10c [ 5776.359916] panic+0x12c/0x29c [ 5776.359937] hung_task_panic+0x0/0x50 [ 5776.359953] kthread+0x120/0x130 [ 5776.359965] ret_from_fork+0x10/0x18 [ 5776.359986] SMP: stopping secondary CPUs [ 5776.360012] Kernel Offset: 0x141ea00000 from 0xffffff8008000000 [ 5776.360026] CPU features: 0x0,2188200c [ 5776.360035] Memory Limit: none command "ifconfig wlan0 down" or "rmmod ath10k_sdio" will be blocked callstack of ifconfig: [<0>] __switch_to+0x120/0x13c [<0>] msleep+0x28/0x38 [<0>] ath10k_sdio_hif_stop+0x24c/0x294 [ath10k_sdio] [<0>] ath10k_core_stop+0x50/0x78 [ath10k_core] [<0>] ath10k_halt+0x120/0x178 [ath10k_core] [<0>] ath10k_stop+0x4c/0x8c [ath10k_core] [<0>] drv_stop+0xe0/0x1e4 [mac80211] [<0>] ieee80211_stop_device+0x48/0x54 [mac80211] [<0>] ieee80211_do_stop+0x678/0x6f8 [mac80211] [<0>] ieee80211_stop+0x20/0x30 [mac80211] [<0>] __dev_close_many+0xb8/0x11c [<0>] __dev_change_flags+0xe0/0x1d0 [<0>] dev_change_flags+0x30/0x6c [<0>] devinet_ioctl+0x370/0x564 [<0>] inet_ioctl+0xdc/0x304 [<0>] sock_do_ioctl+0x50/0x288 [<0>] compat_sock_ioctl+0x1b4/0x1aac [<0>] __se_compat_sys_ioctl+0x100/0x26fc [<0>] __arm64_compat_sys_ioctl+0x20/0x2c [<0>] el0_svc_common+0xa4/0x154 [<0>] el0_svc_compat_handler+0x2c/0x38 [<0>] el0_svc_compat+0x8/0x18 [<0>] 0xffffffffffffffff callstack of rmmod: [<0>] __switch_to+0x120/0x13c [<0>] msleep+0x28/0x38 [<0>] ath10k_sdio_hif_stop+0x294/0x31c [ath10k_sdio] [<0>] ath10k_core_stop+0x50/0x78 [ath10k_core] [<0>] ath10k_halt+0x120/0x178 [ath10k_core] [<0>] ath10k_stop+0x4c/0x8c [ath10k_core] [<0>] drv_stop+0xe0/0x1e4 [mac80211] [<0>] ieee80211_stop_device+0x48/0x54 [mac80211] [<0>] ieee80211_do_stop+0x678/0x6f8 [mac80211] [<0>] ieee80211_stop+0x20/0x30 [mac80211] [<0>] __dev_close_many+0xb8/0x11c [<0>] dev_close_many+0x70/0x100 [<0>] dev_close+0x4c/0x80 [<0>] cfg80211_shutdown_all_interfaces+0x50/0xcc [cfg80211] [<0>] ieee80211_remove_interfaces+0x58/0x1a0 [mac80211] [<0>] ieee80211_unregister_hw+0x40/0x100 [mac80211] [<0>] ath10k_mac_unregister+0x1c/0x44 [ath10k_core] [<0>] ath10k_core_unregister+0x38/0x7c [ath10k_core] [<0>] ath10k_sdio_remove+0x8c/0xd0 [ath10k_sdio] [<0>] sdio_bus_remove+0x48/0x108 [<0>] device_release_driver_internal+0x138/0x1ec [<0>] driver_detach+0x6c/0xa8 [<0>] bus_remove_driver+0x78/0xa8 [<0>] driver_unregister+0x30/0x50 [<0>] sdio_unregister_driver+0x28/0x34 [<0>] cleanup_module+0x14/0x6bc [ath10k_sdio] [<0>] __arm64_sys_delete_module+0x1e0/0x22c [<0>] el0_svc_common+0xa4/0x154 [<0>] el0_svc_compat_handler+0x2c/0x38 [<0>] el0_svc_compat+0x8/0x18 [<0>] 0xffffffffffffffff SNOC: [ 647.156863] Call trace: [ 647.162166] [<ffffff80080855a4>] __switch_to+0x120/0x13c [ 647.164512] [<ffffff800899d8b8>] __schedule+0x5ec/0x798 [ 647.170062] [<ffffff800899dad8>] schedule+0x74/0x94 [ 647.175050] [<ffffff80089a0848>] schedule_timeout+0x314/0x42c [ 647.179874] [<ffffff80089a0a14>] schedule_timeout_uninterruptible+0x34/0x40 [ 647.185780] [<ffffff80082a494>] msleep+0x28/0x38 [ 647.192546] [<ffffff800117ec4c>] ath10k_snoc_hif_stop+0x4c/0x1e0 [ath10k_snoc] [ 647.197439] [<ffffff80010dfbd8>] ath10k_core_stop+0x50/0x7c [ath10k_core] [ 647.204652] [<ffffff80010c8f48>] ath10k_halt+0x114/0x16c [ath10k_core] [ 647.211420] [<ffffff80010cad68>] ath10k_stop+0x4c/0x88 [ath10k_core] [ 647.217865] [<ffffff8000fdbf54>] drv_stop+0x110/0x244 [mac80211] [ 647.224367] [<ffffff80010147ac>] ieee80211_stop_device+0x48/0x54 [mac80211] [ 647.230359] [<ffffff8000ff3eec>] ieee80211_do_stop+0x6a4/0x73c [mac80211] [ 647.237033] [<ffffff8000ff4500>] ieee80211_stop+0x20/0x30 [mac80211] [ 647.243942] [<ffffff80087e39b8>] __dev_close_many+0xa0/0xfc [ 647.250435] [<ffffff80087e3888>] dev_close_many+0x70/0x100 [ 647.255651] [<ffffff80087e3a60>] dev_close+0x4c/0x80 [ 647.261244] [<ffffff8000f1ba54>] cfg80211_shutdown_all_interfaces+0x44/0xcc [cfg80211] [ 647.266383] [<ffffff8000ff3fdc>] ieee80211_remove_interfaces+0x58/0x1b4 [mac80211] [ 647.274128] [<ffffff8000fda540>] ieee80211_unregister_hw+0x50/0x120 [mac80211] [ 647.281659] [<ffffff80010ca314>] ath10k_mac_unregister+0x1c/0x44 [ath10k_core] [ 647.288839] [<ffffff80010dfc94>] ath10k_core_unregister+0x48/0x90 [ath10k_core] [ 647.296027] [<ffffff800117e598>] ath10k_snoc_remove+0x5c/0x150 [ath10k_snoc] [ 647.303229] [<ffffff80085625fc>] platform_drv_remove+0x28/0x50 [ 647.310517] [<ffffff80085601a4>] device_release_driver_internal+0x114/0x1b8 [ 647.316257] [<ffffff80085602e4>] driver_detach+0x6c/0xa8 [ 647.323021] [<ffffff800855e5b8>] bus_remove_driver+0x78/0xa8 [ 647.328571] [<ffffff800856107c>] driver_unregister+0x30/0x50 [ 647.334213] [<ffffff8008562674>] platform_driver_unregister+0x1c/0x28 [ 647.339876] [<ffffff800117fefc>] cleanup_module+0x1c/0x120 [ath10k_snoc] [ 647.346196] [<ffffff8008143ab8>] SyS_delete_module+0x1dc/0x22c PCIe: [ 615.392770] rmmod D 0 3523 3458 0x00000080 [ 615.392777] Call Trace: [ 615.392784] __schedule+0x617/0x7d3 [ 615.392791] ? __mod_timer+0x263/0x35c [ 615.392797] schedule+0x62/0x72 [ 615.392803] schedule_timeout+0x8d/0xf3 [ 615.392809] ? run_local_timers+0x6b/0x6b [ 615.392814] msleep+0x1b/0x22 [ 615.392824] ath10k_pci_hif_stop+0x68/0xd6 [ath10k_pci] [ 615.392844] ath10k_core_stop+0x44/0x67 [ath10k_core] [ 615.392859] ath10k_halt+0x102/0x153 [ath10k_core] [ 615.392873] ath10k_stop+0x38/0x75 [ath10k_core] [ 615.392893] drv_stop+0x9a/0x13c [mac80211] [ 615.392915] ieee80211_do_stop+0x772/0x7cd [mac80211] [ 615.392937] ieee80211_stop+0x1a/0x1e [mac80211] [ 615.392945] __dev_close_many+0x9e/0xf0 [ 615.392952] dev_close_many+0x62/0xe8 [ 615.392958] dev_close+0x54/0x7d [ 615.392975] cfg80211_shutdown_all_interfaces+0x6e/0xa5 [cfg80211] [ 615.393021] ieee80211_remove_interfaces+0x52/0x1aa [mac80211] [ 615.393049] ieee80211_unregister_hw+0x54/0x136 [mac80211] [ 615.393068] ath10k_mac_unregister+0x19/0x4a [ath10k_core] [ 615.393091] ath10k_core_unregister+0x39/0x7e [ath10k_core] [ 615.393104] ath10k_pci_remove+0x3d/0x7f [ath10k_pci] [ 615.393117] pci_device_remove+0x41/0xa6 [ 615.393129] device_release_driver_internal+0x123/0x1ec [ 615.393140] driver_detach+0x60/0x90 [ 615.393152] bus_remove_driver+0x72/0x9f [ 615.393164] pci_unregister_driver+0x1e/0x87 [ 615.393177] SyS_delete_module+0x1d7/0x277 [ 615.393188] do_syscall_64+0x6b/0xf7 [ 615.393199] entry_SYSCALL_64_after_hwframe+0x41/0xa6 The test command run simulate_fw_crash firstly and it call into ath10k_sdio_hif_stop from ath10k_core_restart, then napi_disable is called and bit NAPI_STATE_SCHED is set. After that, function ath10k_sdio_hif_stop is called again from ath10k_stop by command "ifconfig wlan0 down" or "rmmod ath10k_sdio", then command blocked. It is blocked by napi_synchronize, napi_disable will set bit with NAPI_STATE_SCHED, and then napi_synchronize will enter dead loop becuase bit NAPI_STATE_SCHED is set by napi_disable. function of napi_synchronize static inline void napi_synchronize(const struct napi_struct *n) { if (IS_ENABLED(CONFIG_SMP)) while (test_bit(NAPI_STATE_SCHED, &n->state)) msleep(1); else barrier(); } function of napi_disable void napi_disable(struct napi_struct *n) { might_sleep(); set_bit(NAPI_STATE_DISABLE, &n->state); while (test_and_set_bit(NAPI_STATE_SCHED, &n->state)) msleep(1); while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state)) msleep(1); hrtimer_cancel(&n->timer); clear_bit(NAPI_STATE_DISABLE, &n->state); } Add flag for it avoid the hang and crash. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049 Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1 Tested-on: WCN3990 hw1.0 SNOC hw1.0 WLAN.HL.3.1-01307.1-QCAHLSWMTPL-2 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1598617348-2325-1-git-send-email-wgong@codeaurora.org
2020-12-17ath9k: Postpone key cache entry deletion for TXQ frames reference itJouni Malinen2-1/+87
Do not delete a key cache entry that is still being referenced by pending frames in TXQs. This avoids reuse of the key cache entry while a frame might still be transmitted using it. To avoid having to do any additional operations during the main TX path operations, track pending key cache entries in a new bitmap and check whether any pending entries can be deleted before every new key add/remove operation. Also clear any remaining entries when stopping the interface. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201214172118.18100-6-jouni@codeaurora.org
2020-12-17ath: Modify ath_key_delete() to not need full key entryJouni Malinen5-23/+22
tkip_keymap can be used internally to avoid the reference to key->cipher and with this, only the key index value itself is needed. This allows ath_key_delete() call to be postponed to be handled after the upper layer STA and key entry have already been removed. This is needed to make ath9k key cache management safer. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201214172118.18100-5-jouni@codeaurora.org
2020-12-17ath: Export ath_hw_keysetmac()Jouni Malinen2-2/+3
ath9k is going to use this for safer management of key cache entries. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201214172118.18100-4-jouni@codeaurora.org
2020-12-17ath9k: Clear key cache explicitly on disabling hardwareJouni Malinen1-0/+5
Now that ath/key.c may not be explicitly clearing keys from the key cache, clear all key cache entries when disabling hardware to make sure no keys are left behind beyond this point. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201214172118.18100-3-jouni@codeaurora.org
2020-12-17ath: Use safer key clearing with key cache entriesJouni Malinen1-1/+10
It is possible for there to be pending frames in TXQs with a reference to the key cache entry that is being deleted. If such a key cache entry is cleared, those pending frame in TXQ might get transmitted without proper encryption. It is safer to leave the previously used key into the key cache in such cases. Instead, only clear the MAC address to prevent RX processing from using this key cache entry. This is needed in particularly in AP mode where the TXQs cannot be flushed on station disconnection. This change alone may not be able to address all cases where the key cache entry might get reused for other purposes immediately (the key cache entry should be released for reuse only once the TXQs do not have any remaining references to them), but this makes it less likely to get unprotected frames and the more complete changes may end up being significantly more complex. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201214172118.18100-2-jouni@codeaurora.org
2020-12-17ath10k: Remove voltage regulator votes during wifi disableRakesh Pillai1-46/+46
When the wlan is disabled, i.e when all the interfaces are deleted, voltage regulator votes are not removed. This leads to more power consumption even when wlan is disabled. Move the adding/removing of voltage regulator votes as part of hif power on/off in SNOC targets, so that these voltage regulator votes are there only when wlan is enabled. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1 Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607713230-18382-1-git-send-email-pillair@codeaurora.org
2020-12-17ath10k: Fix error handling in case of CE pipe init failureRakesh Pillai1-2/+3
Currently if the copy engine pipe init fails for snoc based chipsets, the rri is not freed. Fix this error handling for copy engine pipe init failure. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1 Fixes: 4945af5b264f ("ath10k: enable SRRI/DRRI support on ddr for WCN3990") Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607713210-18320-1-git-send-email-pillair@codeaurora.org
2020-12-17ath11k: Fix ath11k_pci_fix_l1ss()Dan Carpenter1-4/+4
All these conditions are reversed so presumably most of the function is dead code. This caused a spurious warning: [ 95.734922] ath11k_pci 0000:06:00.0: failed to set sysclk: 0 Fixes: 0699940755e9 ("ath11k: pci: fix L1ss clock unstable problem") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/X9nGDHiTh+Z+asDy@mwanda
2020-12-17ath11k: Fix error code in ath11k_core_suspend()Dan Carpenter1-1/+1
The "if (!ret)" condition is inverted and it should be "if (ret)". It means that we return success when we had intended to return an error code. This also caused a spurious warning even when the suspend was successful: [ 297.186612] ath11k_pci 0000:06:00.0: failed to suspend hif: 0 Fixes: d1b0c33850d2 ("ath11k: implement suspend for QCA6390 PCI devices") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/X9nF17L2/EKOSbn/@mwanda
2020-12-17ath11k: start vdev if a bss peer is already createdCarl Huang3-2/+25
For QCA6390, bss peer must be created before vdev is to start. This change is to start vdev if a bss peer is created. Otherwise, ath11k delays to start vdev. This fixes an issue in a case where HT/VHT/HE settings change between authentication and association, e.g., due to the user space request to disable HT. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201211051358.9191-1-cjhuang@codeaurora.org
2020-12-17ath11k: fix crash caused by NULL rx_channelCarl Huang1-3/+7
During connect and disconnect stress test, crashed happened because ar->rx_channel is NULL. Fix it by checking whether ar->rx_channel is NULL. Crash stack is as below: RIP: 0010:ath11k_dp_rx_h_ppdu+0x110/0x230 [ath11k] [ 5028.808963] ath11k_dp_rx_wbm_err+0x14a/0x360 [ath11k] [ 5028.808970] ath11k_dp_rx_process_wbm_err+0x41c/0x520 [ath11k] [ 5028.808978] ath11k_dp_service_srng+0x25e/0x2d0 [ath11k] [ 5028.808982] ath11k_pci_ext_grp_napi_poll+0x23/0x80 [ath11k_pci] [ 5028.808986] net_rx_action+0x27e/0x400 [ 5028.808990] __do_softirq+0xfd/0x2bb [ 5028.808993] irq_exit+0xa6/0xb0 [ 5028.808995] do_IRQ+0x56/0xe0 [ 5028.808997] common_interrupt+0xf/0xf Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201211055613.9310-1-cjhuang@codeaurora.org
2020-12-17ath11k: add missing null check on allocated skbColin Ian King1-0/+3
Currently the null check on a newly allocated skb is missing and this can lead to a null pointer dereference is the allocation fails. Fix this by adding a null check and returning -ENOMEM. Addresses-Coverity: ("Dereference null return") Fixes: 43ed15e1ee01 ("ath11k: put hw to DBS using WMI_PDEV_SET_HW_MODE_CMDID") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201214232417.84556-1-colin.king@canonical.com
2020-12-15ath9k: make relay callbacks constJani Nikula1-1/+1
Now that relay_open() accepts const callbacks, make relay callbacks const. Link: https://lkml.kernel.org/r/7db0286c428f3a478dd7544afef04a3b131f1aa0.1606153547.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15ath11k: make relay callbacks constJani Nikula1-1/+1
Now that relay_open() accepts const callbacks, make relay callbacks const. Link: https://lkml.kernel.org/r/44e3d65b71025c462948d0c554061dc7b40ab488.1606153547.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15ath10k: make relay callbacks constJani Nikula1-1/+1
Now that relay_open() accepts const callbacks, make relay callbacks const. Link: https://lkml.kernel.org/r/85cabc6d4b0d0ca43d4e0fb94897ccd16e3b7930.1606153547.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-12ath11k: implement suspend for QCA6390 PCI devicesCarl Huang8-2/+124
Now that all the needed pieces are in place implement suspend support QCA6390 PCI devices. All other devices will return -EOPNOTSUPP during suspend. The suspend is implemented by switching the firmware to WoW mode during suspend, so the firmware will be running on low power mode while host is in suspend. At the moment we are not able to shutdown and fully power off the device due to bugs in MHI subsystem, so WoW mode is a workaround for the time being. During suspend we enable WoW mode, disable CE irq and DP irq, then put MHI to suspend state. During resume, driver resumes MHI firstly, then enables CE irq and dp IRQ, and sends WoW wakeup command to firmware. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-11-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: hif: add ce irq enable and disable functionsCarl Huang2-1/+32
Add ce irq enable and disable hif layer functions, so core module can enable enable them without cleaning pipe and refilling pipe. Needed for suspend. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-10-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: implement WoW enable and wakeup commandsCarl Huang7-1/+355
Implement wow enable ane wow wakeup commands which are needed for suspend. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-9-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: set credit_update flag for flow controlled ep onlyCarl Huang1-3/+5
Firmware will check all the pipes before entering WoW mode during suspend. If ATH11K_HTC_FLAG_NEED_CREDIT_UPDATE is set, firmware treats this pipe needed to return credit even though it's actually not required. If any pipe needs to return credit, the suspend_complete message doesn't send to host but is dropped. So host gets time out and WoW suspend failed. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-8-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: dp: stop rx pktlog before suspendCarl Huang4-0/+56
Stop dp rx pktlog when entering suspend and reap the mon_status buffer to keep it empty. During resume restart the reap timer. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-7-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: htc: implement suspend handlingCarl Huang4-2/+31
When ath11k sends suspend command to firmware, firmware will return suspend_complete events and add handlers for those. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-6-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: htc: remove unused struct ath11k_htc_opsKalle Valo1-6/+0
No need for it so remove. Compile tested only. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-5-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: pci: read select_window register to ensure write is finishedCarl Huang1-0/+1
Just when resume from WoW, the write to select_window doesn't take effect immediately, so read the register again to ensure the write operation is finished. Another change is to reset select_window to ZERO because this register isn't restored after WoW, so the content of this register becomes ZERO too. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-4-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: hif: implement suspend and resume functionsCarl Huang2-0/+38
For suspend support add suspend and resume to HIF layer. These ops are optional and, for example, AHB bus driver does not need to implement these. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-3-git-send-email-kvalo@codeaurora.org
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.