aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)AuthorFilesLines
2020-09-21wcn36xx: Add wcn36xx_smd_set_sta_ht_ldpc_params()Bryan O'Donoghue1-0/+11
Adds a routine to allow setting the LDPC bit for HT parameter passing inside the version 1 STA parameters data structure. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150552.2178882-6-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wcn36xx_smd_set_sta_vht_params()Bryan O'Donoghue1-0/+25
This commit adds support for setting VHT parameters based on the declared VHT capability bits in the VHT capability structure. We cannot do 160MHz so VHT Channel width set should be zero. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150552.2178882-5-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wcn36xx_smd_set_sta_default_ht_ldpc_params()Bryan O'Donoghue1-0/+11
Toggling the LDPC enabled bit is possible only via the extended V1 data-structure. This function provides a means of setting the default depending on chip-type. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150552.2178882-4-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wcn36xx_smd_set_sta_default_vht_params()Bryan O'Donoghue1-0/+18
This commit adds support for setting default VHT parameters, which are exposed by the extended version 1 STA parameter type. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150552.2178882-3-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add wcn36xx_set_default_rates_v1Bryan O'Donoghue2-0/+9
Add a routine to set some additional default parameters associated with the V1 data structure. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150552.2178882-2-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Use V1 data structure to store supported ratesBryan O'Donoghue2-3/+4
This patch converts the internal data structure used to store data-rates from version 0 to version 1. This allows us to extend out the internal storage to represent VHT parameters. Using the extended version 1 data-structure allows us to avoid a whole raft of version 1 specific fixup functions. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150450.2178784-3-bryan.odonoghue@linaro.org
2020-09-21wcn36xx: Add VHT fields to parameter data structuresBryan O'Donoghue2-1/+15
In order to pass VHT parameters to wcn3680 we need to use a super-set of the V1 data-structures with additional VHT parameters tacked on. This patch adds the additional fields to the STA and BSS parameter structures. Since neither wcn3620 nor wcn3660 support VHT the size of the passed message is fixed to the previous message length. Subsequent changes will differentiate between wcn3620/wcn3660 and wcn3680 which does use the larger message size. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910150450.2178784-2-bryan.odonoghue@linaro.org
2020-09-21ath11k: Remove rproc references from common core layerGovind Singh4-37/+44
IPQ8074 HW uses rproc with AHB as underlying hif layer. Move rproc references from common core layer to target hif layer. Remove IS_ENABLED check for CONFIG_REMOTEPROC as it's not required anymore. No functional changes. Compile tested only. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1600090615-18904-1-git-send-email-govinds@codeaurora.org
2020-09-21ath9k: hif_usb: fix race condition between usb_get_urb() and usb_kill_anchored_urbs()Brooke Basile1-0/+19
Calls to usb_kill_anchored_urbs() after usb_kill_urb() on multiprocessor systems create a race condition in which usb_kill_anchored_urbs() deallocates the URB before the completer callback is called in usb_kill_urb(), resulting in a use-after-free. To fix this, add proper lock protection to usb_kill_urb() calls that can possibly run concurrently with usb_kill_anchored_urbs(). Reported-by: syzbot+89bd486af9427a9fc605@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=cabffad18eb74197f84871802fd2c5117b61febf Signed-off-by: Brooke Basile <brookebasile@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200911071427.32354-1-brookebasile@gmail.com
2020-09-18mac80211: swap NEED_TXPROCESSING and HW_80211_ENCAP tx flagsFelix Fietkau2-4/+4
In order to unify the tx status path, the hw 802.11 encapsulation flag needs to survive the trip to the tx status call. Since we don't have any free bits in info->flags, we need to move one. IEEE80211_TX_INTFL_NEED_TXPROCESSING is only used internally in mac80211, and only before the call into the driver. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-10-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: rework tx encapsulation offload APIFelix Fietkau1-27/+34
The current API (which lets the driver turn on/off per vif directly) has a number of limitations: - it does not deal with AP_VLAN - conditions for enabling (no tkip, no monitor) are only checked at add_interface time - no way to indicate 4-addr support In order to address this, store offload flags in struct ieee80211_vif (easy to extend for decap offload later). mac80211 initially sets the enable flag, but gives the driver a chance to modify it before its settings are applied. In addition to the .add_interface op, a .update_vif_offload op is introduced, which can be used for runtime changes. If a driver can't disable encap offload at runtime, or if it has some extra limitations, it can simply override the flags within those ops. Support for encap offload with 4-address mode interfaces can be enabled by setting a flag from .add_interface or .update_vif_offload. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-6-nbd@nbd.name [resolved conflict with commit aa2092a9bab3 ("ath11k: add raw mode and software crypto support")] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-11Merge tag 'wireless-drivers-next-2020-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-nextDavid S. Miller114-1658/+6910
Kalle Valo says: ==================== wireless-drivers-next patches for v5.10 First set of patches for v5.10. Most noteworthy here is ath11k getting initial support for QCA6390 and IPQ6018 devices. But most of the patches are cleanup: W=1 warning fixes, fallthrough keywords, DMA API changes and tasklet API changes. Major changes: ath10k * support SDIO firmware codedumps * support station specific TID configurations ath11k * add support for IPQ6018 * add support for QCA6390 PCI devices ath9k * add support for NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 to improve PTK0 rekeying wcn36xx * add support for TX ack ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11ath10k: Remove unused macro ATH10K_ROC_TIMEOUT_HZYueHaibing1-2/+0
There is no caller in tree, so can remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200909135834.38448-1-yuehaibing@huawei.com
2020-09-11ath11k: Remove unused inline function htt_htt_stats_debug_dump()YueHaibing1-44/+0
There is no caller in tree, so can remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200909134533.19604-1-yuehaibing@huawei.com
2020-09-11ath11k: fix link error when CONFIG_REMOTEPROC is disabledKalle Valo1-0/+3
If CONFIG_REMOTEPROC was disabled the linking failed with: ERROR: modpost: "rproc_get_by_phandle" [drivers/net/wireless/ath/ath11k/ath11k.ko] undefined! Compile tested only. Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: 1ff8ed786d5d ("ath11k: use remoteproc only with AHB devices") Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/0101017476e38f40-c4168ac4-c00a-4220-a032-fe17e4a157cb-000000@us-west-2.amazonses.com
2020-09-11ath11k: remove calling ath11k_init_hw_params() second timeAnilkumar Kolli1-6/+0
During probe ath11k_init_hw_params() is called from ath11k_core_pre_init() and is not needed agian in ath11k_core_init(). Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1 Fixes: 1ff8ed786d5d (ath11k: use remoteproc only with AHB devices) Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/010101746d2a40d3-25cd7dbe-c0dd-4fdf-8735-366d7fb40207-000000@us-west-2.amazonses.com
2020-09-11ath11k: add raw mode and software crypto supportVenkateswara Naralasetty7-22/+91
Adding raw mode tx/rx support. Also, adding support for software crypto which depends on raw mode. To enable raw mode tx/rx: insmod ath11k.ko frame_mode=0 To enable software crypto: insmod ath11k.ko crypto_mode=1 These modes could be helpful in debugging crypto related issues. Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/010101746c6a52d9-18302a2c-0d6d-4057-aa4b-95960c809646-000000@us-west-2.amazonses.com
2020-09-11ath11k: add ipq6018 supportAnilkumar Kolli4-0/+136
IPQ6018 has one 5G and one 2G radio with 2x2, shares ipq8074 configurations. Tested on: IPQ6018 hw1.0 AHB WLAN.HK.2.2-02134-QCAHKSWPL_SILICONZ-1 Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/010101746cb68b63-c2bc31ec-a31e-442e-a572-26f4c045c06b-000000@us-west-2.amazonses.com
2020-09-11ath11k: move target ce configs to hw_paramsAnilkumar Kolli6-435/+442
Move target CE config and target CE service config to hw_params. No functional changes. Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/010101746cb685d9-6bedeccb-29a1-4d32-8664-fcfe7d105f4a-000000@us-west-2.amazonses.com
2020-09-09ath11k: Add peer max mpdu parameter in peer assoc commandTamizh Chelvam1-0/+25
Add peer max mpdu length configuration support in peer_assoc_he parameters. Noticed low throughput for the STA which supports HE, HT and not VHT in MU-MIMO case without this configuration Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1588611900-21185-2-git-send-email-tamizhr@codeaurora.org
2020-09-09ath11k: fix uninitialized return in ath11k_spectral_process_data()Dan Carpenter1-0/+2
There is a success path where "ret" isn't initialized where we never have a ATH11K_SPECTRAL_TAG_SCAN_SEARCH and then ret isn't initialized. Fixes: 9d11b7bff950 ("ath11k: add support for spectral scan") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200619142922.GA267142@mwanda
2020-09-08ath11k: fix a double free and a memory leakTom Rix1-1/+3
clang static analyzer reports this problem mac.c:6204:2: warning: Attempt to free released memory kfree(ar->mac.sbands[NL80211_BAND_2GHZ].channels); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The channels pointer is allocated in ath11k_mac_setup_channels_rates() When it fails midway, it cleans up the memory it has already allocated. So the error handling needs to skip freeing the memory. There is a second problem. ath11k_mac_setup_channels_rates(), allocates 3 channels. err_free misses releasing ar->mac.sbands[NL80211_BAND_6GHZ].channels Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200906212625.17059-1-trix@redhat.com
2020-09-08ath10k: Add support for chain1 regulator supply votingRakesh Pillai1-0/+1
Add support to vote for chain-1 voltage regulator in WCN3990. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1 Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1593194502-13164-3-git-send-email-pillair@codeaurora.org
2020-09-02wcn36xx: Set feature DOT11AC for wcn3680Bryan O'Donoghue1-0/+2
In order for the firmware to process extended V1 parameters with the addtional VHT fields added we need to first enable the feature bit DOT11AC. Once done the version number in the HAL message header will be acted upon by the firmware. Extended V1 parameters are a prerequisite for 802.11ac speeds since we cannot communicate VHT parameters to the firmware absent the extended data structures. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200829033846.2167619-11-bryan.odonoghue@linaro.org
2020-09-02wcn36xx: Use existing pointers in wcn36xx_smd_config_bss_v1Bryan O'Donoghue1-58/+42
Two pointers are already defined in this function "bss" and "sta" which point to fields within msg_body->bss_params. We can substantially reduce the amount of extraneous text in this function by making use of those pointers. This change makes the code easier to read and modify. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200829033846.2167619-10-bryan.odonoghue@linaro.org
2020-09-02wcn36xx: Add Supported rates V1 structureBryan O'Donoghue1-0/+70
This commit adds the supported rates V1 structure as defined in Prima riva/inc/wlan_hal_msg.h Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200829033846.2167619-9-bryan.odonoghue@linaro.org
2020-09-02wcn36xx: Add 802.11ac HAL param bitfieldsBryan O'Donoghue1-1/+5
This patch enumerates four previously unused bits in wcn36xx_hal_config_sta_params_v1 describing - HT LDPC enable - VHT LDPC enable - VHT TX BF enable - VHT MU Beamformee enable Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200829033846.2167619-8-bryan.odonoghue@linaro.org
2020-09-02wcn36xx: Specify ieee80211_rx_status.nssBryan O'Donoghue1-0/+1
Specify the number of spatial streams in ieee80211_rx_status. For non VHT data-rates the wireless core doesn't care about this field, however for VHT data-rates it does. Every version of wcn36xx has one spatial stream, so specify nss for wcn3620, wcn3660 and wcn3680 now. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200829033846.2167619-7-bryan.odonoghue@linaro.org
2020-09-02wcn36xx: Fix warning due to bad rate_idxLoic Poulain1-0/+9
The rate_idx is the index of the bitrate in the supported rate table. However the 5Ghz band has a smaller legacy bitrate table than 2.4Ghz since it does not have the DSSS bitrates (1, 2, 5.5, 11). So in 5Ghz band the index should adjusted accrodingly (-4). Signed-off-by: Loic Poulain <loic.poulain@linaro.org> [bod: Made sure fix is only applied if the rate_idx > n_bitrates] Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200829033846.2167619-6-bryan.odonoghue@linaro.org
2020-09-02wcn36xx: Add 802.11ac MCS ratesBryan O'Donoghue1-1/+108
This commit incorporates the 802.11ac table defined in downstream into upstream wcn36xx. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200829033846.2167619-5-bryan.odonoghue@linaro.org
2020-09-02wcn36xx: Hook and identify RF_IRIS_WCN3680Bryan O'Donoghue1-0/+2
If DT indicates we are dealing with a WCN3680 mark the rf_id field as RF_IRIS_WCN3680 allowing for further chip-specific logic. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200829033846.2167619-3-bryan.odonoghue@linaro.org
2020-09-02wcn36xx: Add a chip identifier for WCN3680Bryan O'Donoghue1-0/+1
The WCN3680 has some specific behaviours that we want to capture to distinguish it from the WCN3620 and WCN3660 respectively. Add an identifier for this purpose. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200829033846.2167619-2-bryan.odonoghue@linaro.org
2020-09-01ath10k: Get rid of "per_ce_irq" hw paramDouglas Anderson2-16/+0
As of the patch ("ath10k: Keep track of which interrupts fired, don't poll them") we now have no users of this hardware parameter. Remove it. Suggested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200709082024.v2.2.I083faa4e62e69f863311c89ae5eb28ec5a229b70@changeid
2020-09-01ath10k: Keep track of which interrupts fired, don't poll themDouglas Anderson4-66/+52
If we have a per CE (Copy Engine) IRQ then we have no summary register. Right now the code generates a summary register by iterating over all copy engines and seeing if they have an interrupt pending. This has a problem. Specifically if _none_ if the Copy Engines have an interrupt pending then they might go into low power mode and reading from their address space will cause a full system crash. This was seen to happen when two interrupts went off at nearly the same time. Both were handled by a single call of ath10k_snoc_napi_poll() but, because there were two interrupts handled and thus two calls to napi_schedule() there was still a second call to ath10k_snoc_napi_poll() which ran with no interrupts pending. Instead of iterating over all the copy engines, let's just keep track of the IRQs that fire. Then we can effectively generate our own summary without ever needing to read the Copy Engines. Tested-on: WCN3990 SNOC WLAN.HL.3.2.2-00490-QCAHLSWMTPL-1 Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Rakesh Pillai <pillair@codeaurora.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200709082024.v2.1.I4d2f85ffa06f38532631e864a3125691ef5ffe06@changeid
2020-09-01ath10k: Add interrupt summary based CE processingRakesh Pillai2-26/+42
Currently the NAPI processing loops through all the copy engines and processes a particular copy engine is the copy completion is set for that copy engine. The host driver is not supposed to access any copy engine register after clearing the interrupt status register. This might result in kernel crash like the one below [ 1159.220143] Call trace: [ 1159.220170] ath10k_snoc_read32+0x20/0x40 [ath10k_snoc] [ 1159.220193] ath10k_ce_per_engine_service_any+0x78/0x130 [ath10k_core] [ 1159.220203] ath10k_snoc_napi_poll+0x38/0x8c [ath10k_snoc] [ 1159.220270] net_rx_action+0x100/0x3b0 [ 1159.220312] __do_softirq+0x164/0x30c [ 1159.220345] run_ksoftirqd+0x2c/0x64 [ 1159.220380] smpboot_thread_fn+0x1b0/0x288 [ 1159.220405] kthread+0x11c/0x12c [ 1159.220423] ret_from_fork+0x10/0x18 To avoid such a scenario, we generate an interrupt summary by reading the copy completion for all the copy engine before actually processing any of them. This will avoid reading the interrupt status register for any CE after the interrupt status is cleared. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1 Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1593193967-29897-1-git-send-email-pillair@codeaurora.org
2020-08-31ath10k: wmi: Use struct_size() helper in ath10k_wmi_alloc_skb()Gustavo A. R. Silva1-24/+12
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. Also, remove unnecessary variable _len_. This code was detected with the help of Coccinelle and, audited and fixed manually. Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200616225132.GA19873@embeddedor
2020-08-31carl9170: Convert 'ar9170_qmap' to inline functionLee Jones3-5/+8
'ar9170_qmap' is used in some source files which include carl9170.h, but not all of them. A 'defined but not used' warning is thrown when compiling the ones which do not use it. Fixes the following W=1 kernel build warning(s) from drivers/net/wireless/ath/carl9170/carl9170.h:57, In file included from drivers/net/wireless/ath/carl9170/carl9170.h:57, drivers/net/wireless/ath/carl9170/carl9170.h:71:17: warning: ‘ar9170_qmap’ defined but not used [-Wunused-const-variable=] NB: Snipped - lots of these repeat Cc: Christian Lamparter <chunkeey@googlemail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200827093351.GA1627017@dell
2020-08-31wil6210: wil_platform: Demote kernel-doc header to standard comment blockLee Jones1-2/+1
There has been no attempt to document any of the function parameters here. Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/wil6210/wil_platform.c:27: warning: Function parameter or member 'dev' not described in 'wil_platform_init' drivers/net/wireless/ath/wil6210/wil_platform.c:27: warning: Function parameter or member 'ops' not described in 'wil_platform_init' drivers/net/wireless/ath/wil6210/wil_platform.c:27: warning: Function parameter or member 'rops' not described in 'wil_platform_init' drivers/net/wireless/ath/wil6210/wil_platform.c:27: warning: Function parameter or member 'wil_handle' not described in 'wil_platform_init' Cc: Maya Erez <merez@codeaurora.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: wil6210@qti.qualcomm.com Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200827073832.GW3248864@dell
2020-08-31wil6210: pmc: Demote a few nonconformant kernel-doc function headersLee Jones1-8/+4
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/wil6210/pmc.c:43: warning: Function parameter or member 'wil' not described in 'wil_pmc_alloc' drivers/net/wireless/ath/wil6210/pmc.c:43: warning: Function parameter or member 'num_descriptors' not described in 'wil_pmc_alloc' drivers/net/wireless/ath/wil6210/pmc.c:43: warning: Function parameter or member 'descriptor_size' not described in 'wil_pmc_alloc' drivers/net/wireless/ath/wil6210/pmc.c:229: warning: Function parameter or member 'wil' not described in 'wil_pmc_free' drivers/net/wireless/ath/wil6210/pmc.c:229: warning: Function parameter or member 'send_pmc_cmd' not described in 'wil_pmc_free' drivers/net/wireless/ath/wil6210/pmc.c:307: warning: Function parameter or member 'wil' not described in 'wil_pmc_last_cmd_status' drivers/net/wireless/ath/wil6210/pmc.c:320: warning: Function parameter or member 'filp' not described in 'wil_pmc_read' drivers/net/wireless/ath/wil6210/pmc.c:320: warning: Function parameter or member 'buf' not described in 'wil_pmc_read' drivers/net/wireless/ath/wil6210/pmc.c:320: warning: Function parameter or member 'count' not described in 'wil_pmc_read' drivers/net/wireless/ath/wil6210/pmc.c:320: warning: Function parameter or member 'f_pos' not described in 'wil_pmc_read' Cc: Maya Erez <merez@codeaurora.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: wil6210@qti.qualcomm.com Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200827073718.GV3248864@dell
2020-08-31wil6210: txrx_edma: Demote comments which are clearly not kernel-docLee Jones1-7/+3
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/wil6210/txrx_edma.c:155: warning: Function parameter or member 'wil' not described in 'wil_ring_alloc_skb_edma' drivers/net/wireless/ath/wil6210/txrx_edma.c:155: warning: Function parameter or member 'ring' not described in 'wil_ring_alloc_skb_edma' drivers/net/wireless/ath/wil6210/txrx_edma.c:155: warning: Function parameter or member 'i' not described in 'wil_ring_alloc_skb_edma' drivers/net/wireless/ath/wil6210/txrx_edma.c:1161: warning: Function parameter or member 'wil' not described in 'wil_tx_sring_handler' drivers/net/wireless/ath/wil6210/txrx_edma.c:1161: warning: Function parameter or member 'sring' not described in 'wil_tx_sring_handler' drivers/net/wireless/ath/wil6210/txrx_edma.c:1328: warning: Function parameter or member 'd' not described in 'wil_tx_desc_offload_setup_tso_edma' drivers/net/wireless/ath/wil6210/txrx_edma.c:1328: warning: Function parameter or member 'tso_desc_type' not described in 'wil_tx_desc_offload_setup_tso_edma' drivers/net/wireless/ath/wil6210/txrx_edma.c:1328: warning: Function parameter or member 'is_ipv4' not described in 'wil_tx_desc_offload_setup_tso_edma' drivers/net/wireless/ath/wil6210/txrx_edma.c:1328: warning: Function parameter or member 'tcp_hdr_len' not described in 'wil_tx_desc_offload_setup_tso_edma' drivers/net/wireless/ath/wil6210/txrx_edma.c:1328: warning: Function parameter or member 'skb_net_hdr_len' not described in 'wil_tx_desc_offload_setup_tso_edma' drivers/net/wireless/ath/wil6210/txrx_edma.c:1328: warning: Function parameter or member 'mss' not described in 'wil_tx_desc_offload_setup_tso_edma' Cc: Maya Erez <merez@codeaurora.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: wil6210@qti.qualcomm.com Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200827073545.GU3248864@dell
2020-08-31wil6210: txrx: Demote obvious abuse of kernel-docLee Jones1-20/+10
None of these headers provide any parameter documentation. Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/wil6210/txrx.c:259: warning: Function parameter or member 'wil' not described in 'wil_vring_alloc_skb' drivers/net/wireless/ath/wil6210/txrx.c:259: warning: Function parameter or member 'vring' not described in 'wil_vring_alloc_skb' drivers/net/wireless/ath/wil6210/txrx.c:259: warning: Function parameter or member 'i' not described in 'wil_vring_alloc_skb' drivers/net/wireless/ath/wil6210/txrx.c:259: warning: Function parameter or member 'headroom' not described in 'wil_vring_alloc_skb' drivers/net/wireless/ath/wil6210/txrx.c:309: warning: Function parameter or member 'wil' not described in 'wil_rx_add_radiotap_header' drivers/net/wireless/ath/wil6210/txrx.c:309: warning: Function parameter or member 'skb' not described in 'wil_rx_add_radiotap_header' drivers/net/wireless/ath/wil6210/txrx.c:444: warning: Function parameter or member 'wil' not described in 'wil_vring_reap_rx' drivers/net/wireless/ath/wil6210/txrx.c:444: warning: Function parameter or member 'vring' not described in 'wil_vring_reap_rx' drivers/net/wireless/ath/wil6210/txrx.c:610: warning: Function parameter or member 'wil' not described in 'wil_rx_refill' drivers/net/wireless/ath/wil6210/txrx.c:610: warning: Function parameter or member 'count' not described in 'wil_rx_refill' drivers/net/wireless/ath/wil6210/txrx.c:1011: warning: Function parameter or member 'wil' not described in 'wil_rx_handle' drivers/net/wireless/ath/wil6210/txrx.c:1011: warning: Function parameter or member 'quota' not described in 'wil_rx_handle' drivers/net/wireless/ath/wil6210/txrx.c:1643: warning: Function parameter or member 'd' not described in 'wil_tx_desc_offload_setup_tso' drivers/net/wireless/ath/wil6210/txrx.c:1643: warning: Function parameter or member 'skb' not described in 'wil_tx_desc_offload_setup_tso' drivers/net/wireless/ath/wil6210/txrx.c:1643: warning: Function parameter or member 'tso_desc_type' not described in 'wil_tx_desc_offload_setup_tso' drivers/net/wireless/ath/wil6210/txrx.c:1643: warning: Function parameter or member 'is_ipv4' not described in 'wil_tx_desc_offload_setup_tso' drivers/net/wireless/ath/wil6210/txrx.c:1643: warning: Function parameter or member 'tcp_hdr_len' not described in 'wil_tx_desc_offload_setup_tso' drivers/net/wireless/ath/wil6210/txrx.c:1643: warning: Function parameter or member 'skb_net_hdr_len' not described in 'wil_tx_desc_offload_setup_tso' drivers/net/wireless/ath/wil6210/txrx.c:1674: warning: Function parameter or member 'd' not described in 'wil_tx_desc_offload_setup' drivers/net/wireless/ath/wil6210/txrx.c:1674: warning: Function parameter or member 'skb' not described in 'wil_tx_desc_offload_setup' drivers/net/wireless/ath/wil6210/txrx.c:2240: warning: Function parameter or member 'wil' not described in '__wil_update_net_queues' drivers/net/wireless/ath/wil6210/txrx.c:2240: warning: Function parameter or member 'vif' not described in '__wil_update_net_queues' drivers/net/wireless/ath/wil6210/txrx.c:2240: warning: Function parameter or member 'ring' not described in '__wil_update_net_queues' drivers/net/wireless/ath/wil6210/txrx.c:2240: warning: Function parameter or member 'check_stop' not described in '__wil_update_net_queues' drivers/net/wireless/ath/wil6210/txrx.c:2430: warning: Function parameter or member 'vif' not described in 'wil_tx_complete' drivers/net/wireless/ath/wil6210/txrx.c:2430: warning: Function parameter or member 'ringid' not described in 'wil_tx_complete' Cc: Maya Erez <merez@codeaurora.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: wil6210@qti.qualcomm.com Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200827073442.GT3248864@dell
2020-08-31wil6210: interrupt: Demote comment header which is clearly not kernel-docLee Jones1-3/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/wil6210/interrupt.c:652: warning: Function parameter or member 'irq' not described in 'wil6210_thread_irq' drivers/net/wireless/ath/wil6210/interrupt.c:652: warning: Function parameter or member 'cookie' not described in 'wil6210_thread_irq' Cc: Maya Erez <merez@codeaurora.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: wil6210@qti.qualcomm.com Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200827073338.GS3248864@dell
2020-08-31wil6210: wmi: Fix formatting and demote non-conforming function headersLee Jones1-21/+15
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/wil6210/wmi.c:52: warning: Incorrect use of kernel-doc format: * Addressing - theory of operations drivers/net/wireless/ath/wil6210/wmi.c:70: warning: Incorrect use of kernel-doc format: * @sparrow_fw_mapping provides memory remapping table for sparrow drivers/net/wireless/ath/wil6210/wmi.c:80: warning: cannot understand function prototype: 'const struct fw_map sparrow_fw_mapping[] = ' drivers/net/wireless/ath/wil6210/wmi.c:107: warning: Cannot understand * @sparrow_d0_mac_rgf_ext - mac_rgf_ext section for Sparrow D0 drivers/net/wireless/ath/wil6210/wmi.c:115: warning: Cannot understand * @talyn_fw_mapping provides memory remapping table for Talyn drivers/net/wireless/ath/wil6210/wmi.c:158: warning: Cannot understand * @talyn_mb_fw_mapping provides memory remapping table for Talyn-MB drivers/net/wireless/ath/wil6210/wmi.c:236: warning: Function parameter or member 'x' not described in 'wmi_addr_remap' drivers/net/wireless/ath/wil6210/wmi.c:255: warning: Function parameter or member 'section' not described in 'wil_find_fw_mapping' drivers/net/wireless/ath/wil6210/wmi.c:278: warning: Function parameter or member 'wil' not described in 'wmi_buffer_block' drivers/net/wireless/ath/wil6210/wmi.c:278: warning: Function parameter or member 'ptr_' not described in 'wmi_buffer_block' drivers/net/wireless/ath/wil6210/wmi.c:278: warning: Function parameter or member 'size' not described in 'wmi_buffer_block' drivers/net/wireless/ath/wil6210/wmi.c:307: warning: Function parameter or member 'wil' not described in 'wmi_addr' drivers/net/wireless/ath/wil6210/wmi.c:307: warning: Function parameter or member 'ptr' not described in 'wmi_addr' drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function parameter or member 'wil' not described in 'wil_find_cid_ringid_sta' drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function parameter or member 'vif' not described in 'wil_find_cid_ringid_sta' drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function parameter or member 'cid' not described in 'wil_find_cid_ringid_sta' drivers/net/wireless/ath/wil6210/wmi.c:1589: warning: Function parameter or member 'ringid' not described in 'wil_find_cid_ringid_sta' drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function parameter or member 'vif' not described in 'wmi_evt_ignore' drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function parameter or member 'id' not described in 'wmi_evt_ignore' drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function parameter or member 'd' not described in 'wmi_evt_ignore' drivers/net/wireless/ath/wil6210/wmi.c:1876: warning: Function parameter or member 'len' not described in 'wmi_evt_ignore' drivers/net/wireless/ath/wil6210/wmi.c:2588: warning: Function parameter or member 'wil' not described in 'wmi_rxon' Cc: Maya Erez <merez@codeaurora.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: wil6210@qti.qualcomm.com Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200827073201.GR3248864@dell
2020-08-31ath11k: fix missing error check on call to ath11k_pci_get_user_msi_assignmentColin Ian King1-3/+6
The return error check on the call to ath11k_pci_get_user_msi_assignment is missing. If an error does occur, num_vectors is still set to zero and later on a division by zero can occur when variable vector is being calculated. Fix this by adding an error check after the call. Addresses-Coverity: ("Division or modulo by zero") Fixes: d4ecb90b3857 ("ath11k: enable DP interrupt setup for QCA6390") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200819111452.52419-1-colin.king@canonical.com
2020-08-31ath11k: fix spelling mistake "moniter" -> "monitor"Colin Ian King1-1/+1
There is a spelling mistake in an ath11k_warn warning message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200819074729.48591-1-colin.king@canonical.com
2020-08-31ath11k: convert tasklets to use new tasklet_setup() APIAllen Pais1-4/+3
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Allen Pais <allen.lkml@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200817090637.26887-5-allen.cryptic@gmail.com
2020-08-27mac80211: rename csa counters to countdown countersJohn Crispin5-7/+7
We want to reuse the functions and structs for other counters such as BSS color change. Rename them to more generic names. Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20200811080107.3615705-2-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-27carl9170: convert tasklets to use new tasklet_setup() APIAllen Pais1-4/+3
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <allen.lkml@gmail.com> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200817090637.26887-4-allen.cryptic@gmail.com
2020-08-27wil6210: debugfs: Fix a couple of formatting issues in 'wil6210_debugfs_init'Lee Jones1-4/+4
Kerneldoc expects attributes/parameters to be in '@*.: ' format and gets confused if the variable does not follow the type/attribute definitions. Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/wil6210/debugfs.c:456: warning: Function parameter or member 'wil' not described in 'wil6210_debugfs_init_offset' drivers/net/wireless/ath/wil6210/debugfs.c:456: warning: Function parameter or member 'dbg' not described in 'wil6210_debugfs_init_offset' drivers/net/wireless/ath/wil6210/debugfs.c:456: warning: Function parameter or member 'base' not described in 'wil6210_debugfs_init_offset' drivers/net/wireless/ath/wil6210/debugfs.c:456: warning: Function parameter or member 'tbl' not described in 'wil6210_debugfs_init_offset' Cc: Maya Erez <merez@codeaurora.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: wil6210@qti.qualcomm.com Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200819072402.3085022-22-lee.jones@linaro.org
2020-08-27carl9170: Use fallthrough pseudo-keywordGustavo A. R. Silva2-4/+4
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200821065204.GA24827@embeddedor
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.