aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/b43/Makefile (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-01-29b43: AC-PHY: prepare place for developing new PHY supportRafał Miłecki1-0/+1
There are new (not anymore?) Broadcom 802.11ac wireless cards based on chipsets like BCM4352 and BCM4360. They use a new PHY type (called simply AC) that will require new specific code. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-08-25b43: implement PPR (Power Per Rate) management/APIRafał Miłecki1-0/+1
Broadcom hardware supports auto-adjustment of TX power depending on the currently used rate. So far all calculations were handled without any helpers (API) using big arrays and magic offsets. It seems Broadcom recently decided to clean this up by developing PPR. Their wlc_ppr.h can be found in open parts of the SDK. As we plan to implement support for rate-based TX power it makes sense to also implement our version of PPR as well. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-20b43: add config for (en|dis)abling G-PHY supportRafał Miłecki1-5/+1
This allows new devices users to save some space. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06b43: N-PHY: init 0x2057 radioRafał Miłecki1-0/+1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08b43: LCN-PHY add place for new PHY supportRafał Miłecki1-0/+1
LCN-PHY was found in 14e4:4727 card. It uses LCN/1 and 0x2064/1 radio. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: prepare place for HT-PHY tablesRafał Miłecki1-0/+1
They are big arrays uploaded to the hardware on init, calibration, etc. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22b43: HT-PHY: define standard structs for channel switchingRafał Miłecki1-0/+1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-17b43: HT-PHY: add place for writing HT PHY supportRafał Miłecki1-0/+1
This is totally broken plus we do not have specs for HT PHY yet. Just introduce place for writing driver if we discover anything. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01b43: add bus device abstraction layerRafał Miłecki1-0/+1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-08b43: rename config option for N-PHY, drop BROKENRafał Miłecki1-4/+4
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-15b43: N-PHY: put 2056-radio's specific code in separated fileRafał Miłecki1-0/+1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-15b43: N-PHY: put radio-specific code in separated fileRafał Miłecki1-0/+1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28b43: Allow PIO mode to be selected at module loadLarry Finger1-1/+1
If userencounter the "Fatal DMA Problem" with a BCM43XX device, and still wish to use b43 as the driver, their only option is to rebuild the kernel with CONFIG_B43_FORCE_PIO. This patch removes this option and allows PIO mode to be selected with a load-time parameter for the module. Note that the configuration variable CONFIG_B43_PIO is also removed. Once the DMA problem with the BCM4312 devices is solved, this patch will likely be reverted. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: John Daiker <daikerjohn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: Add Soft-MAC SDIO device supportAlbert Herranz1-0/+1
This adds support for Soft-MAC SDIO devices to b43. The driver still lacks some fixes for SDIO devices, so it's currently marked as BROKEN. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-10b43/legacy: port to cfg80211 rfkillJohannes Berg1-1/+1
This ports the b43/legacy rfkill code to the new API offered by cfg80211 and thus removes a lot of useless stuff. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09b43: Add LP-PHY baseband init for >=rev2Michael Buesch1-0/+1
This adds code for the baseband init of LP-PHY >=2. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05b43: Add LP-PHY templateMichael Buesch1-0/+1
This adds template code for the LP-PHY. No actual functionality is implemented. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05b43: Move code from nphy.* to phy_n.*Michael Buesch1-1/+1
Sourcecode files for PHY code are named by phy_XXX.{c,h} where XXX is the PHY type. Move the N-PHY code to match the other files. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29b43: Implement dynamic PHY APIMichael Buesch1-1/+3
This patch implements a dynamic "ops" based PHY API. This is needed in order to conveniently support future PHY types to avoid the "switch"-hell. This patch does not change any functionality. It just moves lots of code from one place to another and adjusts it for the changed data structures. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08b43: Add PIO support for PCMCIA devicesMichael Buesch1-0/+1
This adds PIO support back (D'oh!) for PCMCIA devices. This is a complete rewrite of the old PIO code. It does actually work and we get reasonable performance out of it on a modern machine. On a PowerBook G4 I get a few MBit for TX and a few more for RX. So it doesn't work as well as DMA (of course), but it's a _lot_ faster than the old PIO code (only got a few kBit with that). The limiting factor is the host CPU speed. So it will generate 100% CPU usage when the network interface is heavily loaded. A voluntary preemption point in the RX path makes sure Desktop Latency isn't hurt. PIO is needed for 16bit PCMCIA devices, as we really don't want to poke with the braindead DMA mechanisms on PCMCIA sockets. Additionally, not all PCMCIA sockets do actually support DMA in 16bit mode (mine doesn't). Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25b43: Don't compile N-PHY code when N-PHY is disabledMichael Buesch1-2/+2
There's no need to compile the N-PHY support code, when the N-PHY support is disabled in Kconfig. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Add NPHY radio init codeMichael Buesch1-0/+1
This adds some code to init the 2055 radio. This patch adds two files "tables_nphy.h" and "tables_nphy.c" Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Add N-PHY register definitionsMichael Buesch1-0/+1
This patch adds all register definitions for the N-PHY. This adds two new files: nphy.h and nphy.c No functional changes to existing code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Remove PIO supportMichael Buesch1-8/+1
Remove b43 PIO support. DMA works well on all supported devices. There's no reason to use PIO. Additionally, new devices don't support PIO in hardware anymore. b43 PIO support is dead and unused code. After applying this patch please do git rm drivers/net/wireless/b43/pio.h git rm drivers/net/wireless/b43/pio.c to remove the main PIO support code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: rewrite A PHY initializationStefano Brivio1-0/+1
Rewrite and sync A PHY initialization with specs, thus allowing for further work to be done on 802.11a support. Note that A PHY initialization involves G PHYs as well. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[B43]: RF-kill supportMichael Buesch1-0/+2
This adds full support for the RFKILL button and the RFKILL LED trigger. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[B43]: LED triggers supportMichael Buesch1-1/+2
Drive the LEDs through the generic LED triggers. Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Larry Finger <larry.finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[B43]: add mac80211-based driver for modern BCM43xx devicesMichael Buesch1-0/+17
Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.