aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/iwmc3200wifi (follow)
AgeCommit message (Collapse)AuthorFilesLines
2009-11-28iwmc3200wifi: Add stopped queue to debugfsSamuel Ortiz1-0/+23
We add the stopped queue count and display to the tx queue debugfs entry. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28iwmc3200wifi: 802.11n Tx aggregation supportSamuel Ortiz8-10/+217
To support 802.11n Tx aggregation support with iwmc3200 wifi, we have to handle the UMAC_CMD_OPCODE_STOP_RESUME_STA_TX notification from the UMAC. Before sending an AddBA, the UMAC synchronizes with the host in order to know what is the last Tx frame it's supposed to receive before it will be able to start the actual aggregation session. We thus have to keep track of the last sequence number that is scheduled for transmission on a particular RAxTID, send an answer to the UMAC with this sequence number. The UMAC then does the BA negociation and once it's done with it sends a new UMAC_CMD_OPCODE_STOP_RESUME_STA_TX notification to let us know that we can resume the Tx flow on the specified RAxTID. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Reviewed-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28iwmc3200wifi: Set wireless mode correctlyZhu Yi1-3/+3
Set the wireless mode with regard to both the driver's configuration and the device's EEPROM result. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28iwmc3200wifi: Update wireless_mode with eeprom valuesSamuel Ortiz3-1/+39
The iwmc3200wifi eeprom contains information about the available PHYs on the chip. We should update our wireless_mode setting and profile according to it. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28iwmc3200wifi: Dont set the UMAC power limit when interface is downSamuel Ortiz1-0/+4
When we're down, we shouldnt try to set the UMAC power limit. We just return 0 instead, and cfg80211 toggles the soft rfkill state. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28iwmc3200wifi: Parse HT channels EEPROM entriesSamuel Ortiz3-8/+56
The fat channels eeprom entries let us know if 11n is enabled or not. We update our wiphy supported bands based on that. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller4-0/+4
Conflicts: drivers/net/sfc/sfe4001.c drivers/net/wireless/libertas/cmd.c drivers/staging/Kconfig drivers/staging/Makefile drivers/staging/rtl8187se/Kconfig drivers/staging/rtl8192e/Kconfig
2009-11-11iwmc3200wifi: declare MODULE_FIRMWAREBen Hutchings1-0/+3
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30wireless: remove WLAN_80211 and WLAN_PRE80211 from KconfigJohn W. Linville1-1/+1
With the WLAN_PRE80211 drivers moved to drivers/staging, this distinction becomes unnecessary. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: handle coexistence radio notificationZhu Yi1-0/+15
Handle WiFi/WiMax coexistence radio preemption notification event. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Set wiphy firmware versionSamuel Ortiz3-0/+13
Our wiphy firmware version is a combination of the UMAC and LMAC ones. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Support unexpected reboot barkerSamuel Ortiz1-0/+8
We can receive unexpected reboot barker at any time, and we're supposed to reset the whole device then. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Try shared auth when open WEP failsSamuel Ortiz4-6/+53
When we fail to associate with an open WEP AP, we fall back to shared auth. This allows us to support joining a shared auth WEP AP with iwconfig. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Do not handle wifi command if the interface is not readySamuel Ortiz1-0/+5
When resetting or bringing the interface down, we should just reject any wifi related command. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Check for cmd pointer before dereferencing itSamuel Ortiz1-2/+8
The wifi_if_wrapper notification handling code uses a cmd pointer without checking if it's valid or not. We're dereferencing it because we assume that we only get to that point if there was a pending command for us. That's not always true, so we'd better check. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: SDIO disable race fixSamuel Ortiz1-2/+2
When calling sdio->bus_disable(), we are flushing the command lists before disabling the sdio function. We can thus potentially get a command response after having flushed the command list. To avoid that race, we have to call iwm_reset() after disabling the sdio function. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Tx power settingSamuel Ortiz3-1/+30
We can now set the Tx power from e.g. iwconfig. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Update fixed size config definitionsSamuel Ortiz1-2/+58
We need to be in sync with the latest firmware API. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Update statistics notification structureSamuel Ortiz1-0/+5
The latest firmware adds a ht_rates and a chain_energy field. The latter is needed as we want to eventually support RSSI/antenna handling. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Improve rx debugSamuel Ortiz1-2/+5
We display the correct DROP/RELEASE string for each rx packets, and when it's dropped we also display the reason. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Profile flags can be WPA1 or WPA2 not bothSamuel Ortiz1-3/+3
UMAC will ASSERT if the profile security flag is WPA1 | WPA2, so we can only accept one of those. Moreover wpa_s wext and nl80211 drivers dont try to send WPA1 | WPA2, but only one at a time. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: CT kill supportSamuel Ortiz8-1/+55
We set the initial CT (Temperature control) value to 110 degrees. If the chip goes over that threshold, we hard block the device which will turn it down. At the same time we schedule a 30 seconds delayed work that unblock the device (and userspace is supposed to bring it back up), hoping that the chip will have cooled down by then... Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: WPS supportSamuel Ortiz2-0/+10
By setting the WSC profile flag, we now support WPS as an enrollee. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: allow joining an existed IBSS networkZhu Yi1-20/+2
We used to only support creating a new IBSS network. Now joining to an existed IBSS network is supported as well. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: add BGN sdio device idZhu Yi1-2/+4
Add BGN SKU sdio device id. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-19iwmc3200wifi: select IWMC3200TOP in KconfigTomas Winkler1-0/+1
iwmc3200wifi requires iwmc3200top for its operation Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11headers: remove sched.h from interrupt.hAlexey Dobriyan4-0/+4
After m68k's task_thread_info() doesn't refer to current, it's possible to remove sched.h from interrupt.h and not break m68k! Many thanks to Heiko Carstens for allowing this. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-10-07iwmc3200wifi: support ETHTOOL_GPERMADDRJohn W. Linville1-0/+2
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-15debugfs: Change debugfs directory of IWMC3200GeunSik Lim1-3/+3
Change default debugfs directory that mount for debugging IWMC3200(Intel Wireless Multicomm 3200 WiFi driver). As we all know, We need change default directory for consistency of debugfs by Greg.K.H Signed-off-by: GeunSik Lim <geunsik.lim@samsung.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-01iwmc3200wifi: Add a last_fw_err debugfs entrySamuel Ortiz5-4/+113
In order to check what was the last fw error we got accross resets, we add this debugfs entry. It displays the complete ASSERT information. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01iwmc3200wifi: Handle UMAC stalls and UMAC assert properlySamuel Ortiz3-9/+40
When UMAC stalls or asserts, we want to reset the device. But when we're associated, the current reset worker will end up calling cfg80211_connect_result() with the cfg80211 sme layer knowing that we're reassociating. That ends up with some ugly warnings. With this patch we're telling the upper layer that we've roamed if reassociation succeeds, and that we're disconnected if it fails. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01iwmc3200wifi: New initial LMAC calibrationSamuel Ortiz4-18/+61
The LMAC calibration API got broken mostly by having a configuration bitmap being different than the result one. This patch tries to address that issue by correctly running calibrations with the newest firmwares, and keeping a backward compatibility fallback path for older firmwares, where the configuration and result bitmaps were identical. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01iwmc3200wifi: fix misuse of le16_to_cpuZhu Yi2-5/+5
Also mark some functions static. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01iwmc3200wifi: add disconnect workZhu Yi3-5/+49
When the driver receives "connection terminated" event from device, it could be caused by 2 reasons: the firmware is roaming or the connection is lost (AP disappears). For the former, an association complete event is supposed to come within 3 seconds. For the latter, the driver won't receive any event except the connection terminated. So we kick a delayed work (5*HZ) when we receive the connection terminated event. It will be canceled if it turns out to be a roaming event later. Otherwise we notify SME and userspace the disconnection. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01iwmc3200wifi: use cfg80211_roamed to send roam eventZhu Yi4-8/+23
The device sends connection terminated and [re]association success (or failure) events when roaming occours. The patch uses cfg80211_roamed instead of cfg80211_connect_result to notify SME for roaming. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01iwmc3200wifi: Fix sparse warningSamuel Ortiz1-2/+3
iwm_cfg80211_get_station() should be static. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01iwmc3200wifi: Set WEP key from connectSamuel Ortiz1-1/+43
When connect is called with the LEGACY_PSK authentication type set, and a proper sme->key, we need to set the WEP key straight after setting the profile otherwise the authentication will never start. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01iwmc3200wifi: invalidate profile when necessary before connectZhu Yi1-5/+10
If cfg80211 requests to connect when we have already had an active profile, invalidate the current profile first before sending a new profile to UMAC. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-12Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller1-0/+1
Conflicts: arch/microblaze/include/asm/socket.h
2009-08-04iwmc3200wifi: avoid setting default key for 802.1X and RSNAZhu Yi1-13/+26
UMAC only allows us to set default key for WEP and auth type is not 802.1X or RSNA. This patch fixes iwmc3200wifi for 802.1X with WEP104. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04iwmc3200wifi: set WEP key static flag correctlyZhu Yi1-2/+8
We should only set the static_key flag for open and legacy authentication types. It should not be set for 802.1X and TKIP. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04iwmc3200wifi: fix set_wpa_version and set_auth_type orderZhu Yi1-2/+7
iwm->umac_profile->sec.flags is set by iwm_set_wpa_version and checked by iwm_set_auth_type. The patch changes the order to make the flag used correctly. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-03drivers/net/wireless: introduce missing kfreeJulia Lawall1-0/+1
Error handling code following a kzalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-30Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6David S. Miller5-192/+1
2009-07-30Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller1-4/+2
Conflicts: drivers/net/wireless/iwlwifi/iwl-3945.h drivers/net/wireless/iwlwifi/iwl-tx.c drivers/net/wireless/iwlwifi/iwl3945-base.c
2009-07-29cfg80211: self-contained wext handling where possibleJohannes Berg5-100/+1
Finally! This is what you've all been waiting for! This patch makes cfg80211 take care of wext emulation _completely_ by itself, drivers that don't need things cfg80211 doesn't do yet don't even need to be aware of wireless extensions. This means we can also clean up mac80211's and iwm's Kconfig and make it possible to build them w/o wext now! RIP wext. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29cfg80211: combine IWESSID handlersJohannes Berg1-34/+2
Since we now have handlers IWESSID for all modes, we can combine them into one. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29cfg80211: combine IWAP handlersJohannes Berg1-32/+2
Since we now have IWAP handlers for all modes, we can combine them into one. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29cfg80211: combine iwfreq implementationsJohannes Berg1-32/+2
Until now we implemented iwfreq for managed mode, we needed to keep the implementations separate, but now that we have all versions implemented we can combine them and export just one handler. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-27wireless: ERR_PTR vs nullDan Carpenter1-4/+2
iwm_wdev_alloc() returns an ERR_PTR on failure and not null. It also prints its own dev_err() message so I removed that as well. Compile tested only. Sorry. Found by smatch (http://repo.or.cz/w/smatch.git). Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.