aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/orinoco/orinoco.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2011-07-15orinoco: minor fixes for problems found by checkpatch.plPavel Roskin1-8/+8
Eliminate spaces before tabs. Eliminate typedefs. Add spaces around operators. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-03drivers/net: use __packed annotationEric Dumazet1-1/+1
cleanup patch. Use new __packed annotation in drivers/net/ Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-07orinoco: refactor xmit pathDavid Kilroy1-0/+6
... so orinoco_usb can share some common functionality. Handle 802.2 encapsulation and MIC calculation in that function. The 802.3 header is prepended to the SKB. The calculated MIC is written to a specified buffer. Also modify the transmit control word that will be passed onto the hardware to specify whether the MIC is present, and the key used. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-03orinoco: add orinoco_usb driverDavid Kilroy1-0/+3
This driver uses the core orinoco modules for the bulk of the functionality. The low level hermes routines (for local bus cards) are replaced, the driver supplies its own ndo_xmit_start function, and locking is done with the _bh variant. Some recent functionality is not available to the USB cards yet (firmware loading and WPA). Out-of-tree driver originally written by Manuel Estrada Sainz. Thanks to Mark Davis for supplying hardware to test the updates. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-03orinoco: encapsulate driver lockingDavid Kilroy1-3/+13
Local bus and USB drivers will need to do locking differently. The original orinoco_usb patches had a boolean variable controlling whether spin_lock_bh was used, or irq based locking. This version provides wrappers for the lock functions and the drivers specify the functions pointers needed. This will introduce a performance penalty, but I'm not expecting it to be noticable. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-03orinoco: allow driver to specify netdev_opsDavid Kilroy1-1/+10
Allow the main drivers to specify a custom version of the net_device_ops structure. This is required by orinoco_usb to supply a separate transmit function. Export existing net_device_ops callbacks so that the drivers can reuse some of the existing code. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-19orinoco: implement set_wiphy_paramsDavid Kilroy1-0/+2
... to set fragmentation and RTS thresholds. Also report RTS retry settings during wiphy init. Note that the existing semantics for enabling microwave robustness are preserved on firmwares that have it. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27orinoco: use cfg80211 ethtool opsDavid Kilroy1-1/+0
Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14orinoco: consolidate storage of WEP and TKIP keysDavid Kilroy1-2/+2
When TKIP support was added, we stored the keys separately to avoid issues when both TKIP and WEP keys are sent to the driver. We need to consolidate the storage to convert to cfg80211, so do this first and try iron out the issues. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14orinoco: use local types for auth alg and sequence lengthDavid Kilroy1-1/+9
This helps in the refactorring required to convert the driver to cfg80211. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14orinoco: prefer_port3 can be a single bitDavid Kilroy1-1/+1
This is a boolean value set based on firmware capabilities, so move the variable to the capabilities section and reduce the structure size. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10orinoco: convert scanning to cfg80211David Kilroy1-18/+4
This removes the custom scan cache used by orinoco. We also have to avoid calling cfg80211_scan_done from the hard interrupt, so we offload the entirety of scan processing to a workqueue. This may behave strangely if you start scanning just prior to suspending... Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10orinoco: convert mode setting to cfg80211David Kilroy1-1/+1
Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10orinoco: Handle suspend/restore in core driverDavid Kilroy1-3/+2
Each device does almost exactly the same things on suspend and resume when upping and downing the interface. So move this logic into a common routine. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10orinoco: move netdev interface creation to main driverDavid Kilroy1-0/+4
With the move to cfg80211 it's nice to keep the hardware operations distinct from the interface, even though we can only support a single interface. This also means the driver resembles other cfg80211 drivers. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10orinoco: initiate cfg80211 conversionDavid Kilroy1-0/+11
Initialise and register a wiphy. Store the orinoco_private structure in the new wiphy, and use the net_device private area to store the wireless_dev. This results in a change to the way we navigate from a net_device to the driver private orinoco_private, which we encapsulate in the inline function ndev_priv. Most of the remaining calls to netdev_priv are thus replaced by ndev_priv. We can immediately rely on cfg80211 to handle SIOCGIWNAME, so orinoco_ioctl_getname is removed. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10orinoco: initialise independently of netdevDavid Kilroy1-0/+1
Initialise the orinoco driver before registerring with netdev, which will help when we get to cfg80211... Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10orinoco: Replace net_device with orinoco_private in driver interfacesDavid Kilroy1-5/+5
Move away from using net_device as the main structure in orinoco function calls. Use orinoco_private instead. This makes more sense when we move to cfg80211, and we get wiphys as well. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16orinoco: firmware: consistently compile out fw cache support if not requestedAndrey Borzenkov1-0/+2
Currently part of support for FW caching is unconditionally compiled in even if it is never used. Consistently remove caching support if not requested by user. Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09orinoco: checkpatch cleanupAndrey Borzenkov1-7/+10
Fix errors and obvious warnings reported by checkpatch in all files except orinoco.c. Orinoco.c is part of different patch series of Dave. Signed-off-by: Andrey Borzenkov <arvidjaar@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29orinoco: Remove unused variable rx_dataDavid Kilroy1-9/+0
Probably something leftover from experimentation with tasklets. Now the structure declaration orinoco_rx_data can be relocated to orinoco.c Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26orinoco: Provide option to avoid unnecessary fw cachingDavid Kilroy1-0/+3
Make firmware caching on startup optional, and make it default. When the option is not selected and PM_SLEEP is configured, then cache firmware in the suspend pm_notifier. This configuration saves about 64k RAM in normal use, but can lead to a situation where the driver is configured to use a different firmware. Signed-off by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26orinoco: Cache Symbol firmwareDavid Kilroy1-1/+2
Signed-off by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10orinoco: Move sources to a subdirectoryDavid Kilroy1-0/+218
Keeping all the orinoco drivers in a common directory will make maintenance easier. Signed-off by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.