aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/quantenna (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-10-05qtnfmac: add support for scan flushSergey Matyukevich3-0/+15
Notify firmware to flush cache before scanning when needed. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: drop error reports for out-of-bounds key indexesSergey Matyukevich1-3/+10
On disconnect wireless core attempts to remove all the supported keys. Following cfg80211_ops conventions, firmware returns -ENOENT code for the out-of-bound key indexes. This is a normal behavior, so no need to report errors for this case. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: inform wireless core about supported extended capabilitiesSergey Matyukevich4-4/+25
Driver retrieves information about supported extended capabilities from wireless card. However this information is not propagated further to Linux wireless core. Fix this by setting extended capabilities fields of wiphy structure. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: pass sgi rate info flag to wireless coreSergey Matyukevich1-0/+3
SGI should be passed to wireless core as a part of rate structure. Otherwise wireless core performs incorrect rate calculation when SGI is enabled in hardware but not reported to host. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: do not cancel scan in disconnect callbackIgor Mitsyanko1-2/+0
Do not cancel scan in disconnect callback. If there is an active scan, it will be cancelled by firmware, then host driver will be properly notified by event. Cancelling scan in disconnect callback occasionally may lead to the following race issue. Host is able to queue one scan after scan abort in disconnect callback, and another scan after scan abort in event handler. As a result, firmware receives second scan before the first scan completes. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: cleanup and unify command error handlingSergey Matyukevich2-433/+149
Unify command error handling using qtnf_cmd_resp_result_decode function. Do not duplicate error messages in command handlers and cfg80211 callbacks: report 'cmd exec fail' only on control path internal failure. Remove redundant 'unlikely' macros. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: do not initialize per-MAC data multiple timesIgor Mitsyanko1-10/+13
Several members of pwr-MAC structure are re-initialized several times together with per-VIF initialization. Fix that and simplify the code. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: request userspace to do OBSS scanning if FW can notIgor Mitsyanko2-0/+5
In case firmware reports that it can not do OBSS scanning for 40MHz 2.4GHz channels itself, tell userpsace to do that instead by setting NL80211_FEATURE_NEED_OBSS_SCAN flag. Signed-off-by: Igor mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: generate local disconnect event in disconnect callbackIgor Mitsyanko1-6/+7
When cfg80211 disconnect callback is triggered and command is processed by firmware, disconnect event with local parameter set must be sent immediately. Indicating that it's a "local" event (not from AP) will help upper layers to process this event correctly. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-05qtnfmac: do not track STA states in driverSergey Matyukevich3-76/+8
Remove STA connection states tracking from driver. Leave it wireless core on host and to firmware. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac_pcie: check for correct CHIP ID at pcie probeIgor Mitsyanko2-0/+38
Make sure that wifi device is of supported variant by checking it's CHIP ID before completing a probe sequence. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac: wait for FW load work to finish at PCIe removeIgor Mitsyanko2-4/+1
Waiting for "completion" to be set in FW load thread can not be used in case PCIe remove is called before FW load work was scheduled. Just wait for work completion instead to avoid problems. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac_pcie: extract platform-independent PCIe codeIgor Mitsyanko5-383/+455
Extract platform-independent PCIe driver code into a separate file, and use it from platform-specific modules. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac: add missing header includes to bus.hIgor Mitsyanko1-0/+3
A few include directives were missing in bus.h resulting in dependency of include order in other modules. Add missing includes. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac_pcie: rename platform-specific functionsIgor Mitsyanko1-49/+52
Rename several functions to indicate that they are platform specific. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac_pcie: separate platform-independent PCIe structureIgor Mitsyanko3-261/+287
Move platform-independent PCIe data structure to a separate header file so it can be reused by different devices. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac_pcie: pearl: rename spinlock tx0_lock to tx_lockIgor Mitsyanko1-5/+5
tx_lock name will later be reused when common pcie code is extracted to separate files. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac_pcie: indicate pearl-specific structures by their namesIgor Mitsyanko2-68/+68
In preparation to extract common PCIe driver state, indicate PEARL-specific structures by their name and move them to pearl-specific source file. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac_pcie: rename private Pearl PCIe state structureIgor Mitsyanko2-138/+111
In preparation to extract common pcie driver state into a separate structure, rename Pearl-specific state to qtnf_pcie_pearl_state and move it directly to pearl-specific PCIe source file. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac_pcie: move Pearl pcie sources to pcie-specific directoryIgor Mitsyanko5-4/+4
In preparation to extract common qtnfmac PCIe driver sources into a separate file, move existing Pearl-specific pcie driver sources to pcie/ directory. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac_pcie: do not store FW name in driver state structureIgor Mitsyanko2-5/+4
Firmware name is only needed at probe stage, no point in keeping it in driver state structure. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-20qtnfmac: remove set but not used variable 'vif'YueHaibing1-3/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/quantenna/qtnfmac/cfg80211.c: In function 'qtnf_dump_survey': drivers/net/wireless/quantenna/qtnfmac/cfg80211.c:694:19: warning: variable 'vif' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02qtnfmac: implement basic WoWLAN supportSergey Matyukevich6-0/+248
This patch implements basic WoWLAN support in qtnfmac driver, including processing of WoWLAN features reported by firmware and implementation of cfg80211 suspend/resume/wakeup callbacks. Currently the following WoWLAN triggers are supported: disconnect, magic packet, custom pattern packet. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-30qtnfmac: enable multiple SSIDs scan supportAndrey Shevchenko4-7/+9
Enable support for multiple SSIDs scans. Get max number of supported SSIDs from firmware and report to cfg80211 core. Signed-off-by: Andrey Shevchenko <ashevchenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-30qtnfmac: implement cfg80211 power management callbackSergei Maksimenko4-0/+82
Implement set_power_mgmt() callback that forwards power saving settings to the device firmware. Signed-off-by: Sergei Maksimenko <smaksimenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-23Merge tag 'wireless-drivers-next-for-davem-2018-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-nextDavid S. Miller4-16/+89
Kalle Valo says: ==================== wireless-drivers-next patches for 4.19 The first set of patches for 4.19. Only smaller features and bug fixes, not really anything major. Also included are changes to include/linux/bitfield.h, we agreed with Johannes that it makes sense to apply them via wireless-drivers-next. Major changes: ath10k * support channel 173 * fix spectral scan for QCA9984 and QCA9888 chipsets ath6kl * add support for Dell Wireless 1537 ti wlcore * add support for runtime PM * enable runtime PM autosuspend support qtnfmac * support changing MAC address * enable source MAC address randomization support libertas * fix suspend and resume for SDIO cards mt76 * add software DFS radar pattern detector for mt76x2 based devices ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-03Merge tag 'wireless-drivers-for-davem-2018-07-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-driversDavid S. Miller1-2/+1
Kalle Valo says: ==================== wireless-drivers fixes for 4.18 First set of fixes for 4.18 and for numerous drivers. Something to mention about is the wcn36xx fix which makes it possible to compile with gcc older than 4.4 (though I'm not sure if we even support those anymore). qtnfmac * coverity fix for a new commit in v4.18-rc1 rtlwifi * fix kernel oops during driver removal * fix firmware image corruption for rtl8821ae brcmfmac * fix crash if there's no firmware image mwifiex * a revert and a better fix for a new commit v4.18-rc1 mt7601u * fix a recent regression about unnecessary warning about avg_rssi wcn36xx * convert testmode.c to plain ASCII ath10k * fix a firmware crash during bandwidth change ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-27wireless-drivers: use BIT_ULL for NL80211_STA_INFO_ attribute typesOmer Efrat1-16/+16
The BIT macro uses unsigned long which some architectures handle as 32 bit and therefore might cause macro's shift to overflow when used on a value equals or larger than 32 (NL80211_STA_INFO_RX_DURATION and afterwards). Since 'filled' member in station_info changed to u64, BIT_ULL macro should be used with all NL80211_STA_INFO_* attribute types instead of BIT to prevent future possible bugs when one will use BIT macro for higher attributes by mistake. This commit cleans up all usages of BIT macro with the above field in wireless-drivers by changing it to BIT_ULL instead. In addition, there are some places which don't use BIT nor BIT_ULL macros so align those as well. Signed-off-by: Omer Efrat <omer.efrat@tandemg.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-27qtnfmac: enable source MAC address randomization supportAndrey Shevchenko3-0/+48
Enable support for source MAC address randomization of probe request frames. Pass addr/mask randomization parameters to firmware. Signed-off-by: Andrey Shevchenko <ashevchenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-27qtnfmac: implement net_device_ops callback to set MAC addressIgor Mitsyanko1-0/+25
Implement net_device_ops::ndo_set_mac_address callback to allow for setting interface MAC address. Implementation is done through existing CHANGE_INTF firmware command. All validation is to be done by firmware. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-23net: Remove depends on HAS_DMA in case of platform dependencyGeert Uytterhoeven1-1/+1
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST". In most cases this other symbol is an architecture or platform specific symbol, or PCI. Generic symbols and drivers without platform dependencies keep their dependencies on HAS_DMA, to prevent compiling subsystems or drivers that cannot work anyway. This simplifies the dependencies, and allows to improve compile-testing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-18qtnfmac: fix NULL pointer dereferenceGustavo A. R. Silva1-2/+1
In case *vif* is NULL at 655: if (!vif), the execution path jumps to label out, where *vif* is dereferenced at 679: if (vif->sta_state == QTNF_STA_CONNECTING) Fix this by immediately returning when *vif* is NULL instead of jumping to label out. Addresses-Coverity-ID: 1469567 ("Dereference after null check") Fixes: 480daa9cb62c ("qtnfmac: fix invalid STA state on EAPOL failure") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quanenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-30qtnfmac: fix invalid STA state on EAPOL failureSergey Matyukevich2-12/+17
Driver switches vif sta_state into QTNF_STA_CONNECTING when cfg80211 core initiates connect procedure. Further this state is changed either to QTNF_STA_CONNECTED or to QTNF_STA_DISCONNECTED by BSS_JOIN and BSS_LEAVE events from firmware. However it is possible that no such events will be sent by firmware, e.g. if EAPOL timed out. In this case vif sta_mode will remain in QTNF_STA_CONNECTING state and all subsequent connection attempts will fail with -EBUSY error code. Fix this by perfroming STA state transition from QTNF_STA_CONNECTING to QTNF_STA_DISCONNECTED in cfg80211 disconnect callback. No need to rely upon firmware events in this case. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30qtnfmac: cancel scan on disconnectAndrey Shevchenko1-0/+2
Cancel scan operation on STA disconnect. Signed-off-by: Andrey Shevchenko <ashevchenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30qtnfmac: fix bg_scan_period parameter processingAndrey Shevchenko2-7/+3
Do not process bg_scan_period parameter in qtnfmac driver. Pass correct values as is. In the case of invalid values pass default value. Leave further processing to firmware. Signed-off-by: Andrey Shevchenko <ashevchenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30qtnfmac: fix firmware command error pathDmitry Lebed2-1/+4
Free command skb if bus state is not QTNF_FW_STATE_ACTIVE. Signed-off-by: Dmitry Lebed <dlebed@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30qtnfmac: improve control path timeout handlingDmitry Lebed3-5/+15
Control path will not be operational after firmware failure. Change bus state to QTNF_FW_STATE_EP_DEAD after the control path timeout. Don't wait for timeout if control path is already dead. Signed-off-by: Dmitry Lebed <dlebed@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30qtnfmac: cleanup wdev structure between its usesSergey Matyukevich2-6/+3
Driver uses statically allocated wdev structures for each virtual interface. However wdev structure is not properly cleaned up between its uses. As a result, various bugs appear when userspace tools like hostapd were not gracefully stopped. In particular, this commit fixes the following issue: - start hostapd with more than 2 mBSS - kill hostapd using SIGKILL - start again hostapd with more than 2 mBSS However only two mBSS entities will be started: primary and the last BSS listed in hostapd config. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30qtnfmac: decode error codes from firmware repliesIgor Mitsyanko2-2/+26
Introduce a function that will map an error code reported in reply to a firmware command, into one of standard errno codes. Use additional error codes to improve error reporting for MAC address changes. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30qtnfmac: simplify notationSergey Matyukevich1-12/+13
Shorten line lengths using a more compact notation to access mac info. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30qtnfmac: remove unused function declarationsAndrey Shevchenko1-5/+0
Functions qtnf_cmd_resp_parse and qtnf_cmd_resp_check have been removed. Remove their declarations as well. Signed-off-by: Andrey Shevchenko <ashevchenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12wireless-drivers: Dynamically allocate struct station_infoToke Høiland-Jørgensen1-14/+27
Since the addition of the TXQ stats to cfg80211, the station_info struct has grown to be quite large, which results in warnings when allocated on the stack. Fix the affected places to do dynamic allocations instead. Fixes: 52539ca89f36 ("cfg80211: Expose TXQ stats and parameters to userspace") Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30qtnfmac: fix qtnf_netdev_hard_start_xmit()'s return typeLuc Van Oostenryck1-1/+1
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-25qtnfmac: pearl: pcie: fix memory leak in qtnf_fw_work_handlerGustavo A. R. Silva1-0/+4
In case memory resources for fw were succesfully allocated, release them before jumping to fw_load_fail. Addresses-Coverity-ID: 1466092 ("Resource leak") Fixes: c3b2f7ca4186 ("qtnfmac: implement asynchronous firmware loading") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-24qtnfmac: add DFS offload supportDmitry Lebed3-2/+25
DFS offload support implemented: - DFS_OFFLOAD feature is advertised depending on HW capabilities - CAC_STARTED event forwarding from HW implemented - start_radar_detection() callback now returning -ENOTSUPP if DFS_OFFLOAD is enabled Signed-off-by: Dmitry Lebed <dlebed@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13net/wireless: fix spaces and grammar copy/paste in vendor Kconfig help textRandy Dunlap1-2/+2
Lots of the wireless driver vendor Kconfig symol help text says "questions about cards." (2 spaces between "about" and "cards") Besides dropping one of those spaces, it also needs some other word inserted there. Instead of putting each vendor's name there, I chose to say "these" cards in all of the Kconfig help text. Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-27qtnfmac: implement asynchronous firmware loadingSergey Matyukevich2-198/+180
In pci probe() function start firmware loading, protocol handshake and driver core initialization, and not wait for completion. Signed-off-by: Sergei Maksimenko <smaksimenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-27qtnfmac: enable reloading of qtnfmac kernel modulesSergei Maksimenko3-1/+16
This patch enables rmmod/insmod for qtnfmac kernel modules: - do not 'pin' pci device in order to disable it on module unload - implement card reset procedure - restore PCI bar addresses for restarted wireless card Signed-off-by: Sergei Maksimenko <smaksimenko@quantenna.com> Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-27qtnfmac: fix releasing Tx/Rx data buffersSergey Matyukevich1-12/+18
Add missing PCI unmap for Tx buffers and release all buffers explicitly. Managed release using devm_add_action is not suitable for qtnfmac Tx/Rx data buffers. The reason is in ordering and dependencies: buffers should be released after transmission is stopped but before PCI device resources and DMA allocations are released. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.