aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ralink/rt2x00/rt2800lib.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13Thomas Gleixner1-12/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25rt2x00: add RT3883 supportGabor Juhos1-17/+581
Patch add support for RT3883 chip. Code was taken direclty from openwrt project and merge into one patch. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-25rt2x00: remove last_nostatus_checkStanislaw Gruszka1-9/+0
We do not any longer check txstatus timeout from tasklet, so do not need this optimization. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-25rt2800: move txstatus pending routineStanislaw Gruszka1-0/+17
Move rt2800usb_txstatus_pending routine to rt2800lib. It will be reused by rt2800mmio code. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-25rt2800: partially restore old mmio txstatus behaviourStanislaw Gruszka1-2/+2
Do not disable txstatus interrupt and add quota of processed tx statuses in one tasklet. Quota is needed to allow to fed device with new frames during processing of tx statuses. Patch fixes about 15% performance degradation on some scenarios caused by 0b0d556e0ebb ("rt2800mmio: use txdone/txstatus routines from lib"). Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-19rt2800: comment and simplify AGC init for RT6352Stanislaw Gruszka1-3/+6
We do not need separate lines for calculating register values. Also add comment that value is different than in vendor driver. Suggested-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-19rt2800: enable TX_PIN_CFG_RFRX_EN only for MT7620Stanislaw Gruszka1-3/+4
The TX_PIN_CFG_RFRX_EN bit was not set on other devices than MT7620, restore old behavaviour since setting this bit maight not be correct for older devices. Fixes: 41977e86c984 ("rt2x00: add support for MT7620") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-19rt2800: enable TX_PIN_CFG_LNA_PE_ bits per bandStanislaw Gruszka1-6/+12
Do not enable TX_PIN_CFG_LNA_PE_A* bits for 2.4GHz band and vice versa TX_PIN_CFG_LNA_PE_G* bits for 5GHz. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-19rt2x00: remove confusing AGC registerTomislav Požega1-5/+1
Register 66 was causing issues on RT6352 if set to the same value as in MTK driver. With 1c reg value device was working fine in both HT20 and HT40 modes. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-19rt2x00: remove unneeded checkTomislav Požega1-53/+50
Remove band check from rf53xx channel config routine since all chips using it are single band. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-01rt2x00: reduce tx power to nominal level on RT6352Tomislav Požega1-1/+1
Current implementation of RT6352 support provides too high tx power at least on iPA/eLNA devices. Reduce amplification of variable gain amplifier by 6dB to match board target power of 17dBm. Transmited signal strength with this patch is similar to that of stock firmware or pandorabox firmware. Throughput measured with iperf improves. Device tested: Xiaomi Miwifi Mini. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-06rt2x00: rt2800lib: mark expected switch fall-throughsGustavo A. R. Silva1-0/+4
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 145198 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01rt2800: flush and txstatus rework for rt2800mmioStanislaw Gruszka1-8/+6
Implement custom rt2800mmio flush routine and change txstatus routine to read TX_STA_FIFO also in the tasklet. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01rt2x00: use different txstatus timeouts when flushingStanislaw Gruszka1-10/+21
Use different tx status timeouts for normal operation and when flushing. This increase timeout to 2s for normal operation as when there are bad radio conditions and frames are reposted many times device can not provide the status for quite long. With new timeout we can still get valid status on such bad conditions. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01rt2x00: do not check for txstatus timeout every time on taskletStanislaw Gruszka1-0/+7
Do not check for tx status timeout everytime we perform txstatus tasklet. Perform check once per half a second. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01rt2800: move usb specific txdone/txstatus routines to rt2800libStanislaw Gruszka1-0/+138
In order to reuse usb txdone/txstatus routines for mmio, move them to common rt2800lib.c file. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-04rt2x00: call sta_add/remove directly in rt2800Stanislaw Gruszka1-4/+7
Only rt2800 subdriver of rt2x00 implement sta_add() and sta_remove(), we do not need generic version of those. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-25rt2x00: rt2800: add antenna diversity for RT5370GXose Vazquez Perez1-3/+6
RT5370G has hardware RX antenna diversity like RT5390R. Based on DPO_RT5572_LinuxSTA_2.6.1.3_20121022.tar.bz2 manufacturer driver: https://d86o2zu8ugzlg.cloudfront.net/mediatek-craft/drivers/DPO_RT5572_LinuxSTA_2.6.1.3_20121022.tar.bz2 Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: wireless newbie <wnewbie72@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux wireless ml <linux-wireless@vger.kernel.org> Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08rt2x00: Fix a typo in printkMasanari Iida1-1/+1
This patch fix a typo in rt2800lib.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-30rt2800: fix TX_PIN_CFG setting for non MT7620 chipsStanislaw Gruszka1-1/+4
Since commit 41977e86c984 ("rt2x00: add support for MT7620") we do not initialize TX_PIN_CFG setting. This cause breakage at least on some RT3573 devices. To fix the problem patch restores previous behaviour for non MT7620 chips. Fixes: 41977e86c984 ("rt2x00: add support for MT7620") Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1480829 Reported-and-tested-by: Jussi Eloranta <jussi.eloranta@csun.edu> Cc: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-13rt2x00: make const array glrt_table staticColin Ian King1-1/+1
Don't populate array glrt_table on the stack but make it static. Makes the object code a smaller by over 670 bytes: Before: text data bss dec hex filename 131772 4733 0 136505 21539 rt2800lib.o After: text data bss dec hex filename 131043 4789 0 135832 21298 rt2800lib.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24rt2x00: convert rt2x00_desc_read return typeArnd Bergmann1-6/+6
This is a semi-automated conversion to change rt2x00_desc_read to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt2x00_desc_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:\(\<_rt2x00_desc_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ drivers/net/wireless/ralink/rt2x00/rt* Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rt2x00: convert rt2800_eeprom_read return typeArnd Bergmann1-97/+97
This is a semi-automated conversion to change rt2800_eeprom_read to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt2800_eeprom_read\(_from_array\|\)\>(.*, .*\), &\(.*\));:\3 = \1);:' drivers/net/wireless/ralink/rt2x00/rt2800lib.c Some manual tweaking was required here to work around the line wraps. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rt2x00: convert rt2x00_eeprom_read return typeArnd Bergmann1-3/+3
This is a semi-automated conversion to change rt2x00_eeprom_read() to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt2x00_eeprom_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:= _\(rt2x00_eeprom_read\):= \1:' drivers/net/wireless/ralink/rt2x00/* Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rt2x00: convert rt2*_bbp_read return typeArnd Bergmann1-62/+54
This is a semi-automated conversion to change *_bbp_read() to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt.*_bbp_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:\(\<rt.*_bbp_dcoc_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:= _\(rt.*_bbp_read\):\1:' drivers/net/wireless/ralink/rt2x00/* Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rt2x00: convert rt2800_register_read return typeArnd Bergmann1-146/+145
This is a semi-automated conversion to change rt2800_register_read to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(rt2800_register_read(.*, .*\), &\(.*\));:\2 = \1);:' \ 's:\(rt2800_register_read_lock(.*, .*\), &\(.*\));:\2 = \1);:' \ drivers/net/wireless/ralink/rt2x00/rt2800lib.c The function itself was modified manually along with the one remaining multi-line caller that was not covered automatically and the indirect reference. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rt2x00: convert rt2x00_rf_read return typeArnd Bergmann1-1/+1
This is a semi-automated conversion to change rt2x00_rf_read() to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt2x00_rf_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ drivers/net/wireless/ralink/rt2x00/rt* Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rt2x00: convert rt2800_rfcsr_read return typeArnd Bergmann1-164/+158
With CONFIG_KASAN enabled and gcc-7, we get a warning about rather high stack usage (with a private patch set I have to turn on this warning, which I intend to get into the next kernel release): wireless/ralink/rt2x00/rt2800lib.c: In function 'rt2800_bw_filter_calibration': wireless/ralink/rt2x00/rt2800lib.c:7990:1: error: the frame size of 2144 bytes is larger than 1536 bytes [-Werror=frame-larger-than=] The problem is that KASAN inserts a redzone around each local variable that gets passed by reference, and the newly added function has a lot of them. This is a semi-automated conversion to change rt2800_rfcsr_read to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(rt2800_rfcsr_read(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:\(rt2800_rfcsr_read_bank(.*, .*\), &\(.*\));:\2 = \1);:' \ drivers/net/wireless/ralink/rt2x00/rt2800lib.c Fixes: 41977e86c984 ("rt2x00: add support for MT7620") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rt2x00: change function pointers for register accessorsArnd Bergmann1-5/+23
This prepares the driver for changing all the 'read' register accessors to return the value instead of passing it by reference. Since a lot of them are used in callbacks, this takes care of the callbacks first, adding a couple of helpers that will be removed again one at a time. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-28mac80211: separate encoding/bandwidth from flagsJohannes Berg1-1/+1
We currently use a lot of flags that are mutually incompatible, separate this out into actual encoding and bandwidth enum values. Much of this again done with spatch, with manual post-editing, mostly to add the switch statements and get rid of the conversions. @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_80MHZ +status->bw = RATE_INFO_BW_80 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_40MHZ +status->bw = RATE_INFO_BW_40 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_20MHZ +status->bw = RATE_INFO_BW_20 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_160MHZ +status->bw = RATE_INFO_BW_160 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_5MHZ +status->bw = RATE_INFO_BW_5 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_10MHZ +status->bw = RATE_INFO_BW_10 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_VHT +status->encoding = RX_ENC_VHT @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_HT +status->encoding = RX_ENC_HT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_VHT +status.encoding = RX_ENC_VHT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_HT +status.encoding = RX_ENC_HT @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_HT) +(status->encoding == RX_ENC_HT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_VHT) +(status->encoding == RX_ENC_VHT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_5MHZ) +(status->bw == RATE_INFO_BW_5) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_10MHZ) +(status->bw == RATE_INFO_BW_10) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_40MHZ) +(status->bw == RATE_INFO_BW_40) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_80MHZ) +(status->bw == RATE_INFO_BW_80) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_160MHZ) +(status->bw == RATE_INFO_BW_160) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: clean up rate encoding bits in RX statusJohannes Berg1-2/+2
In preparation for adding support for HE rates, clean up the driver report encoding for rate/bandwidth reporting on RX frames. Much of this patch was done with the following spatch: @@ expression status; @@ -status->flag & (RX_FLAG_HT | RX_FLAG_VHT) +status->enc_flags & (RX_ENC_FLAG_HT | RX_ENC_FLAG_VHT) @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORTPRE +status->enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status->flag & RX_FLAG_SHORTPRE +status->enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT +status->enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status->flag & RX_FLAG_HT +status->enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_40MHZ +status->enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status->flag & RX_FLAG_40MHZ +status->enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORT_GI +status->enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status->flag & RX_FLAG_SHORT_GI +status->enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT_GF +status->enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status->flag & RX_FLAG_HT_GF +status->enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_VHT +status->enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status->flag & RX_FLAG_VHT +status->enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_STBC_MASK +status->enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status->flag & RX_FLAG_STBC_MASK +status->enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_LDPC +status->enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status->flag & RX_FLAG_LDPC +status->enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_10MHZ +status->enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status->flag & RX_FLAG_10MHZ +status->enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_5MHZ +status->enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status->flag & RX_FLAG_5MHZ +status->enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_80MHZ +status->enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_80MHZ +status->enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_160MHZ +status->enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_160MHZ +status->enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_BF +status->enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_BF +status->enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status->flag op STBC << RX_FLAG_STBC_SHIFT +status->enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORTPRE +status.enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status.flag & RX_FLAG_SHORTPRE +status.enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT +status.enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status.flag & RX_FLAG_HT +status.enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_40MHZ +status.enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status.flag & RX_FLAG_40MHZ +status.enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORT_GI +status.enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status.flag & RX_FLAG_SHORT_GI +status.enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT_GF +status.enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status.flag & RX_FLAG_HT_GF +status.enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_VHT +status.enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status.flag & RX_FLAG_VHT +status.enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_STBC_MASK +status.enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status.flag & RX_FLAG_STBC_MASK +status.enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_LDPC +status.enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status.flag & RX_FLAG_LDPC +status.enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_10MHZ +status.enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status.flag & RX_FLAG_10MHZ +status.enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_5MHZ +status.enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status.flag & RX_FLAG_5MHZ +status.enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_80MHZ +status.enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_80MHZ +status.enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_160MHZ +status.enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_160MHZ +status.enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_BF +status.enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_BF +status.enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status.flag op STBC << RX_FLAG_STBC_SHIFT +status.enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ @@ -RX_FLAG_STBC_SHIFT +RX_ENC_FLAG_STBC_SHIFT Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-20rt2800: fix mt7620 E2 channel registersTomislav Požega1-2/+4
update RF register 47 and 54 values according to vendor driver Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-20rt2800: fix mt7620 vco calibration registersTomislav Požega1-3/+3
Use register values from init LNA function instead of the ones from restore LNA function. Apply register values based on rx path configuration. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-20rt2800: do VCO calibration after programming ALCDaniel Golle1-0/+2
Somehow AP doesn't come up and the first scan fails if we don't do VCO calibration every time. The vendor driver duplicates the VCO calibration function into the channel switching logic, we can do the same with less duplication. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-20rt2800: fix LNA gain assignment for MT7620Daniel Golle1-2/+16
The base value used for MT7620 differs from Rt5392 which resulted in quite bad RX signal quality. Fix this by using the correct base value as well as the LNA calibration values for HT20. Reported-by: Tom Psyborg <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rt2x00: reverse external PA capability flag logicDaniel Golle1-20/+20
Consequently refer to external PA instead of inverting the logic and use an internal PA capability flag which is a bit confusing. Currently this is used for Rt3352 only, but MT7620A also allows for an external PA which will be supported by a follow up patch. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-03-22rt2x00: add support for MT7620Roman Yeryomin1-26/+1395
Basic support for MT7620 built-in wireless radio was added to OpenWrt in r41441. It has seen some heavy cleaning and refactoring since in order to match the Kernel's code quality standards. Signed-off-by: Roman Yeryomin <roman@advem.lv> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-03-08rt2800: status based rate flags for nomatch caseStanislaw Gruszka1-1/+34
We use skb_desc->tx_rate_flags from entry as rate[].flags even if skb does not match status. Patch corrects flags and also fixes mcs for legacy rates. rt2800_rate_from_status() is based on Felix's mt76 mt76x2_mac_process_tx_rate() function. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-03-08rt2x00: use txdone_nomatch on rt2800usbStanislaw Gruszka1-6/+25
If we do not match skb entry, provide tx status via nomatch procedure. Currently in that case we do rt2x00lib_txdone_noinfo(TXDONE_NOINFO), which actually assume that entry->skb was posted without retries and provide rate saved in skb desc as successful. Patch changed that to rate read from TX_STAT_FIFO, however still do not provide correct number of retries. On SoC/PCI devices we keep providing status via standard txdone procedure, no change in those devices, though we should thing about it. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-03-08rt2800: identify station based on status WCIDStanislaw Gruszka1-0/+5
Add framework to identify sta based on tx status WCID. This is currently not used, will start be utilized in the future patch. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-08rt2x00: call entry directly in rt2x00_dump_frameStanislaw Gruszka1-1/+1
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-31rt2800: enable rt3290 unconditionally on pci probeStanislaw Gruszka1-3/+0
When we restart system using sysrq RT3290 device do not initalize properly, hance always enable it via WLAN_FUN_CTRL register on probe. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=85461 Reported-and-tested-by: Giedrius Statkevičius <edrius.statkevicius@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-28rt2x00: add support for RT5350 WiSoCSerge Vasilugin1-7/+118
Support for the RT5350 WiSoC was added to OpenWrt after having a lengthy debate about the legality of the original submission, see https://lists.openwrt.org/pipermail/openwrt-devel/2013-January/018224.html MTK/Ralink Acked replied and says we can merge this patch under the GPL. https://dev.openwrt.org/changeset/36177 Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> Tested-by: Michel Stempin <michel.stempin@wanadoo.fr> Acked-by: John Crispin <blogic@openwrt.org> [daniel@makrotopia.org: added commit message, cleaned up code] Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-28rt2x00: rt2800lib: add support for RT3352 with 20MHz crystalDaniel Golle1-1/+30
On Rt3352 the driver needs to know the frequency of an external crystal which can be either 40 MHz (as on all other WiSoCs until now) or 20 MHz. Get the clock attached by ramips WiSoC platform code which probes SYSC_REG_SYSCFG (added by John Crispin in commit 6ac8579b96e3b) and introduce a new flag clk_is_20mhz in struct hw_mode_spec to make the driver aware and use either 40 MHz or 20 MHz specific rf_vals on those WiSoC platforms. The introduced support for boards with a 20 MHz crystal is also needed for RT5350. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-19rt2x00: rt2800lib: support for for RT3352 with external PADaniel Golle1-13/+63
This is needed for WiFi to work e.g. on DIR-615 rev.H1 which got external RF power amplifiers connected to the WiSoC. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-19rt2x00: rt2800lib: fix rf id for RT3352Felix Fietkau1-0/+2
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-19rt2x00: rt2800lib: correctly set HT20/HT40 filterSerge Vasilugin1-2/+11
Simple patch to correct HT20/HT40 filter setting. Tested with Rt3290, Rt3352 and Rt5350 Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-19rt2800: remove warning on bcn_num != rt2x00dev->intf_beaconingStanislaw Gruszka1-2/+0
Since rt2800pci update beacon settings asynchronously from tbtt tasklet, without beacon_skb_mutex protection, number of currently active beacons entries can be different than number pointed by rt2x00dev->intf_beaconing. Remove warning about that inconsistency. Reported-by: evaxige@qq.com Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-17rt2800: set max_psdu to 3 on usb devicesStanislaw Gruszka1-5/+6
All Ralink USB devices I have, including old ones, work well with max_psdu = 3 (64kB tx AMPDUs). Fix indent on the way. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-17rt2800: tune TX_RTS_CFG configStanislaw Gruszka1-2/+2
Enable RTS frame retry fall-back and limit number of RTS retries to 7 what is default number of retries for small frames. As RTS/CTS is used for TXOP protection, those settings prevent posting lots of RTS frames when remote station do not response with CTS at the moment. After sending 7 RTS's the HW will start back-off mechanism and after it will start posing RTS again to get access to the medium. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.