aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/realtek
AgeCommit message (Collapse)AuthorFilesLines
2016-04-14rtl8xxxu: Adjust AFE crystal value on 8192euJes Sorensen2-0/+43
Adjust AFE before enabling PLL on 8192eu, probably also needed for 8723bu. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Implement IQK calibration for 8192euJes Sorensen2-1/+608
8192eu has it's own IQK calibration procedure, and notably uses undocumented RF register 0x56 in the process. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Use proper register name for REG_PAD_CTRL1Jes Sorensen1-2/+2
Fixup another case where the hard coded register value was used instead of the name. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Implement 8192eu device specific quirksJes Sorensen2-0/+15
Set REG_QUEUE_CTRL and REG_ACLK_MON for 8192eu. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Fix LDPC RX hang issue on 8192euJes Sorensen1-0/+10
Implement workaround for LDPC RX hands on 8192eu. This was inspired by workaround found in the 8192eu vendor driver. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Set REG_USB_HRPWM for 8192euJes Sorensen2-0/+3
The vendor driver set register 0xfe58 REG_USB_HWPWM in it's init sequence for 8192eu. Do the same here. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Set correct interrupt masking registers on 8192euJes Sorensen1-10/+10
Set HIMR[01] on 8192eu instead of HISR/HIMR. It's not obvious this really matters for USB devices, but this matches the register writes performed by the vendor driver. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Handle XTAL value setting on 8192euJes Sorensen1-1/+4
Set REG_AFE_XTAL_CTRL on 8192eu to the vendor driver value, and do not skip setting REG_MAX_AGGR_NUM on 8192eu. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Provide special handling when writing RF regs on 8192euJes Sorensen1-1/+13
The 8192eu requires clearing/restoring bit 17 in REG_FPGA0_POWER_SAVE before/after writing RF registers. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Handle BB init for 8192euJes Sorensen1-0/+5
The 8192eu does not use REG_AFE_PLL_CTRL in it's BB init sequence, so provide device specific handling. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Correctly parse 8192eu efuseJes Sorensen2-22/+56
The 8192eu efuse only has power data for path A and B. It follows the same layout as 8723bu. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Pick PHY init table based on chip version firstJes Sorensen1-7/+6
Pick PHY init table based on device before distinguishing between 1T/2T/high PA tables. The latter is only currently used for 8188cu/8192cu/8188ru. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Add 8192eu PHY init tableJes Sorensen1-0/+140
The 8192eu also requires it's own PHY init table. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Add 8192eu AGC tablesJes Sorensen1-1/+146
A device specific AGC table is required for the 8192eu as well. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Add radio init tables for 8192euJes Sorensen1-0/+154
Add the required radio init tables for 8192eu devices. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Set TX page boundaries for 8192euJes Sorensen2-1/+7
The 8192eu also has it's own TRXFF boundary value to set. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Do not mess with AFE_XTAL_CTRL on 8192euJes Sorensen1-1/+1
To match the vendor driver, do not mess with AFE_XTAL_CTRL on 8192eu. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Add MAC init table for 8192euJes Sorensen2-6/+40
The 8192eu requires a different MAC init table. Add the missing table and specify the table to use in the fileops structure. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-12cfg80211: remove enum ieee80211_bandJohannes Berg6-52/+52
This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-07rtl8xxxu: Do not set LDOA15 / LDOV12 on 8192euJes Sorensen1-1/+1
Per the vendor driver, it looks like the 8192eu doesn't have LDOA15 / LDOV12 registers. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Use correct H2C calls for 8192euJes Sorensen1-2/+2
The 8192eu uses the same H2C API as the 8723bu. Call the correct functions for update_rate_mask() and report_connect(). Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Identify 8192eu rev A/B parts correctlyJes Sorensen1-1/+1
8192eu A/B cut parts were incorrectly identified as 8192cu devices. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Use enums for chip version numbersJes Sorensen2-43/+67
With support for more chips being added, use an enum to specify the chip version. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Update some register definitionsJes Sorensen1-7/+24
Improve descriptive names of some registers and add some additional registers only found on nextgen chips. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: 8192eu uses txdesc40Jes Sorensen1-1/+1
8192eu uses the new TX descriptor format Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: TXDESC_SHORT_GI is txdesc32 onlyJes Sorensen2-2/+2
This is no short GI bit in the txdesc40 format. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Correct txdesc40 gid definitionJes Sorensen1-1/+1
txdesc40 dword2 gid is a 6 bit field, not a single bit Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Rename TX descriptor bits to map them to 32/40 byte descriptorsJes Sorensen2-78/+71
With the size based naming of TX descriptors. Change the bit definition namings to indicate which descriptor format they match, rather than having a device name in the bit name. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Change name of struct tx_desc to be more decriptiveJes Sorensen2-12/+12
There are two major types of TX descriptor formats for the RTL parts, the old 32 byte descriptor, and the newer 40 byte descriptor used by the 8723bu, 8192eu, and 88xx series. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl818x_pci: Disable pci device in error handling codeJia-Ju Bai1-1/+3
When pci_request_regions in rtl8180_probe fails, pci_disable_device is not called to disable the device which is enabled by pci_enbale_device. This patch fixes the problem by adding a new lable in error handling code. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Acked-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtlwifi: use to_delayed_work()Geliang Tang1-1/+1
Use to_delayed_work() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> [Update commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-06rtlwifi: btcoexist: Convert BTC_PRINTK to btc_<foo>_dbgJoe Perches7-1985/+1851
Use a more common logging style. Miscellanea: o Add specific logging macros for ALGORITHM and INTERFACE types o Output the messages at KERN_DEBUG o Coalesce formats o Align arguments o Whitespace style adjustments for only these changes Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-06rtlwifi: rtl8821ae: Fix Smatch warningsLarry Finger2-6/+6
Smatch reports the following: CHECK drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:1960 rtl8812ae_dm_txpower_tracking_callback_thermalmeter() warn: inconsistent indenting CHECK drivers/net/wireless/realtek/rtlwifi/rtl8821ae/trx.c drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:455 phy_get_tx_swing_8812A() warn: inconsistent indenting drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:517 phy_get_tx_swing_8812A() warn: inconsistent indenting Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-06rtlwifi: rtl8723be: Fix Smatch warningsLarry Finger2-8/+6
Smatch reports the following: CHECK drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c:1726 _rtl8723be_phy_path_a_rx_iqk() warn: inconsistent indenting drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c:2304 _rtl8723be_phy_lc_calibrate() warn: inconsistent indenting drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c:2609 _rtl8723be_phy_set_rf_power_state() warn: inconsistent indenting CHECK drivers/net/wireless/realtek/rtlwifi/rtl8723be/rf.c drivers/net/wireless/realtek/rtlwifi/rtl8723be/rf.c:306 _rtl8723be_get_txpower_writeval_by_regulatory() warn: inconsistent indenting Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-06rtlwifi: rtl8723ae: Fix Smatch warningLarry Finger1-3/+3
Smatch reports the following: CHECK drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hal_btc.c drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hal_btc.c:137 rtl8723e_dm_bt_need_to_dec_bt_pwr() warn: inconsistent indenting Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-06rtlwifi: rtl8192se: Fix Smatch warningLarry Finger1-1/+1
Smatch lists the following: CHECK drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c:648 rtl92s_phy_set_rf_power_state() warn: inconsistent indenting Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-06rtlwifi: rtl8192ee: Fix Smatch warningLarry Finger1-1/+1
Smatch lists the following: CHECK drivers/net/wireless/realtek/rtlwifi/rtl8192ee/trx.c drivers/net/wireless/realtek/rtlwifi/rtl8192ee/trx.c:371 rtl92ee_rx_query_desc() warn: inconsistent indenting Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-06rtlwifi: rtl8192c-common: Fix Smatch warningLarry Finger1-1/+1
Smatch lists the following: CHECK drivers/net/wireless/realtek/rtlwifi/rtl8192c/dm_common.c drivers/net/wireless/realtek/rtlwifi/rtl8192c/dm_common.c:243 rtl92c_dm_false_alarm_counter_statistics() warn: inconsistent indenting Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-06rtlwifi: rtl8188ee: Fix Smatch warningsLarry Finger2-3/+2
Smatch reports the following: CHECK drivers/net/wireless/realtek/rtlwifi/rtl8188ee/dm.c drivers/net/wireless/realtek/rtlwifi/rtl8188ee/dm.c:1140 rtl88e_dm_check_txpower_tracking() warn: inconsistent indenting CHECK drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c:1906 _rtl88e_phy_lc_calibrate() warn: inconsistent indenting Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-06rtlwifi: btcoexist: Fix Smatch warningLarry Finger1-1/+1
Smatch reports the following: CHECK drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3078 btc8723b2ant_run_coexist_mechanism() warn: inconsistent indenting Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-06rtlwifi: Fix Smatch warningsLarry Finger1-19/+18
Smatch reports the following: CHECK drivers/net/wireless/realtek/rtlwifi/pci.c drivers/net/wireless/realtek/rtlwifi/pci.c:366 rtl_pci_check_buddy_priv() error: we previously assumed 'tpriv' could be null (see line 368) drivers/net/wireless/realtek/rtlwifi/pci.c:1216 _rtl_pci_init_struct() warn: inconsistent indenting Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-06rtlwifi: btcoexist: Implement antenna selectionLarry Finger4-5/+38
The previous patch added an option to rtl8723be to manually select the antenna for those cases when only a single antenna is present, and the on-board EEPROM is incorrectly programmed. This patch implements the necessary changes in the Bluetooth coexistence driver. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [V4.0+] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-06rtlwifi: rtl8723be: Add antenna select module parameterLarry Finger3-0/+11
A number of new laptops have been delivered with only a single antenna. In principle, this is OK; however, a problem arises when the on-board EEPROM is programmed to use the other antenna connection. The option of opening the computer and moving the connector is not always possible as it will void the warranty in some cases. In addition, this solution breaks the Windows driver when the box dual boots Linux and Windows. A fix involving a new module parameter has been developed. This commit adds the new parameter and implements the changes needed for the driver. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [V4.0+] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-23rtlwifi: fix gcc-6 indentation warningArnd Bergmann1-3/+3
The rtl8821ae_dm_txpower_tracking_callback_thermalmeter function contains a call to RT_TRACE() that is indented in a misleading way, as pointed out by a gcc-6 warning: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c: In function 'rtl8821ae_dm_txpower_tracking_callback_thermalmeter': drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:2491:4: error: statement is indented as if it were guarded by... RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD, ^~~~~~~~ drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:2488:3: note: ...this 'for' clause, but it is not for (p = RF90_PATH_A; p < MAX_PATH_NUM_8821A; p++) ^~~ It is clear from the context that the call was not meant to be part of the loop and only the indentation is wrong, so this removes the extra tabs. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds23-563/+3986
Pull networking updates from David Miller: "Highlights: 1) Support more Realtek wireless chips, from Jes Sorenson. 2) New BPF types for per-cpu hash and arrap maps, from Alexei Starovoitov. 3) Make several TCP sysctls per-namespace, from Nikolay Borisov. 4) Allow the use of SO_REUSEPORT in order to do per-thread processing of incoming TCP/UDP connections. The muxing can be done using a BPF program which hashes the incoming packet. From Craig Gallek. 5) Add a multiplexer for TCP streams, to provide a messaged based interface. BPF programs can be used to determine the message boundaries. From Tom Herbert. 6) Add 802.1AE MACSEC support, from Sabrina Dubroca. 7) Avoid factorial complexity when taking down an inetdev interface with lots of configured addresses. We were doing things like traversing the entire address less for each address removed, and flushing the entire netfilter conntrack table for every address as well. 8) Add and use SKB bulk free infrastructure, from Jesper Brouer. 9) Allow offloading u32 classifiers to hardware, and implement for ixgbe, from John Fastabend. 10) Allow configuring IRQ coalescing parameters on a per-queue basis, from Kan Liang. 11) Extend ethtool so that larger link mode masks can be supported. From David Decotigny. 12) Introduce devlink, which can be used to configure port link types (ethernet vs Infiniband, etc.), port splitting, and switch device level attributes as a whole. From Jiri Pirko. 13) Hardware offload support for flower classifiers, from Amir Vadai. 14) Add "Local Checksum Offload". Basically, for a tunneled packet the checksum of the outer header is 'constant' (because with the checksum field filled into the inner protocol header, the payload of the outer frame checksums to 'zero'), and we can take advantage of that in various ways. From Edward Cree" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits) bonding: fix bond_get_stats() net: bcmgenet: fix dma api length mismatch net/mlx4_core: Fix backward compatibility on VFs phy: mdio-thunder: Fix some Kconfig typos lan78xx: add ndo_get_stats64 lan78xx: handle statistics counter rollover RDS: TCP: Remove unused constant RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket net: smc911x: convert pxa dma to dmaengine team: remove duplicate set of flag IFF_MULTICAST bonding: remove duplicate set of flag IFF_MULTICAST net: fix a comment typo ethernet: micrel: fix some error codes ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it bpf, dst: add and use dst_tclassid helper bpf: make skb->tc_classid also readable net: mvneta: bm: clarify dependencies cls_bpf: reset class and reuse major in da ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c ldmvsw: Add ldmvsw.c driver code ...
2016-03-17Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds1-1/+1
Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: drivers/rtc: broken link fix drm/i915 Fix typos in i915_gem_fence.c Docs: fix missing word in REPORTING-BUGS lib+mm: fix few spelling mistakes MAINTAINERS: add git URL for APM driver treewide: Fix typo in printk
2016-03-10rtl8xxxu: Temporarily disable 8192eu device initJes Sorensen1-0/+4
To reduce the patch volume, temporariliy disable 8192eu device init. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Use correct 8051 reset function for 8723b partsJes Sorensen2-2/+39
8723b needs more action, so implement support for device specific reset functions. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Print a warning if flushing the FIFO failsJes Sorensen1-1/+4
Only print a warning if the FIFO flush fails, as opposed to printing the status unconditionally. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Flush FIFO before powering down devicesJes Sorensen2-0/+36
This should help when reloading the driver for 8723bu devices Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>