aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/rsi (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-06-15rsi: fix AP mode with WPA failure due to encrypted EAPOLMartin Fuzzey4-7/+2
In AP mode WPA2-PSK connections were not established. The reason was that the AP was sending the first message of the 4 way handshake encrypted, even though no pairwise key had (correctly) yet been set. Encryption was enabled if the "security_enable" driver flag was set and encryption was not explicitly disabled by IEEE80211_TX_INTFL_DONT_ENCRYPT. However security_enable was set when *any* key, including the AP GTK key, had been set which was causing unwanted encryption even if no key was avaialble for the unicast packet to be sent. Fix this by adding a check that we have a key and drop the old security_enable driver flag which is insufficient and redundant. The Redpine downstream out of tree driver does it this way too. Regarding the Fixes tag the actual code being modified was introduced earlier, with the original driver submission, in dad0d04fa7ba ("rsi: Add RS9113 wireless driver"), however at that time AP mode was not yet supported so there was no bug at that point. So I have tagged the introduction of AP support instead which was part of the patch set "rsi: support for AP mode" [1] It is not clear whether AP WPA has ever worked, I can see nothing on the kernel side that broke it afterwards yet the AP support patch series says "Tests are performed to confirm aggregation, connections in WEP and WPA/WPA2 security." One possibility is that the initial tests were done with a modified userspace (hostapd). [1] https://www.spinics.net/lists/linux-wireless/msg165302.html Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Fixes: 38ef62353acb ("rsi: security enhancements for AP mode") CC: stable@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1622564459-24430-1-git-send-email-martin.fuzzey@flowbird.group
2021-06-15rsi: Add support for changing beacon intervalMarek Vasut1-0/+17
Pick code for changing the beacon interval (e.g. using beacon_int in hostap config) from the downstream RSI driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com> Cc: Angus Ainslie <angus@akkea.ca> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Karun Eagalapati <karun256@gmail.com> Cc: Martin Kepplinger <martink@posteo.de> Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: netdev@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210507213149.140192-1-marex@denx.de
2021-06-15rsi: Assign beacon rate settings to the correct rate_info descriptor fieldMarek Vasut1-2/+2
The RSI_RATE_x bits must be assigned to struct rsi_data_desc rate_info field. The rest of the driver does it correctly, except this one place, so fix it. This is also aligned with the RSI downstream vendor driver. Without this patch, an AP operating at 5 GHz does not transmit any beacons at all, this patch fixes that. Fixes: d26a9559403c ("rsi: add beacon changes for AP mode") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com> Cc: Angus Ainslie <angus@akkea.ca> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Karun Eagalapati <karun256@gmail.com> Cc: Martin Kepplinger <martink@posteo.de> Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210507213105.140138-1-marex@denx.de
2021-06-15rsi: Fix missing function name in commentsYang Shen1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_mgmt.c:1550: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210517050141.61488-10-shenyang39@huawei.com
2021-04-18rsi: Use resume_noirq for SDIOMarek Vasut1-1/+1
The rsi_resume() does access the bus to enable interrupts on the RSI SDIO WiFi card, however when calling sdio_claim_host() in the resume path, it is possible the bus is already claimed and sdio_claim_host() spins indefinitelly. Enable the SDIO card interrupts in resume_noirq instead to prevent anything else from claiming the SDIO bus first. Fixes: 20db07332736 ("rsi: sdio suspend and resume support") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com> Cc: Angus Ainslie <angus@akkea.ca> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Karun Eagalapati <karun256@gmail.com> Cc: Martin Kepplinger <martink@posteo.de> Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210327235932.175896-1-marex@denx.de
2021-04-18rsi: fix comment syntax in file headersAditya Srivastava10-10/+10
The opening comment mark '/**' is used for highlighting the beginning of kernel-doc comments. There are some files in drivers/net/wireless/rsi which follow this syntax in their file headers, i.e. start with '/**' like comments, which causes unexpected warnings from kernel-doc. E.g., running scripts/kernel-doc -none on drivers/net/wireless/rsi/rsi_coex.h causes this warning: "warning: wrong kernel-doc identifier on line: * Copyright (c) 2018 Redpine Signals Inc." Similarly for other files too. Provide a simple fix by replacing such occurrences with general comment format, i.e., "/*", to prevent kernel-doc from parsing it. Signed-off-by: Aditya Srivastava <yashsri421@gmail.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210315173259.8757-1-yashsri421@gmail.com
2021-04-13rsi: remove unused including <linux/version.h>Yang Li1-1/+0
Fix the following versioncheck warning: ./drivers/net/wireless/rsi/rsi_91x_ps.c: 19 linux/version.h not needed. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky3-3/+0
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-08rsi: remove redundant assignmentwengjianfeng1-2/+1
INVALID_QUEUE has been used as a return value,it is not necessary to assign it to q_num,so just return INVALID_QUEUE. Signed-off-by: wengjianfeng <wengjianfeng@yulong.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210203062717.1228-1-samirweng1979@163.com
2020-11-24rsi: fix error return code in rsi_reset_card()Zhang Changzhong1-15/+15
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 17ff2c794f39 ("rsi: reset device changes for 9116") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1605582454-39649-1-git-send-email-zhangchangzhong@huawei.com
2020-11-10rsi: Clean up loop in the interrupt handlerMarek Vasut1-63/+58
The inner do { ... } while loop is completely useless, all it does is iterate over a switch-case statement, one bit at a time. This can easily be replaced by simple if (status & bit) { ... } tests for each bit. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Angus Ainslie <angus@akkea.ca> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Martin Kepplinger <martink@posteo.de> Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201103180941.443528-2-marex@denx.de
2020-11-10rsi: Move card interrupt handling to RX threadMarek Vasut3-51/+15
The interrupt handling of the RS911x is particularly heavy. For each RX packet, the card does three SDIO transactions, one to read interrupt status register, one to RX buffer length, one to read the RX packet(s). This translates to ~330 uS per one cycle of interrupt handler. In case there is more incoming traffic, this will be more. The drivers/mmc/core/sdio_irq.c has the following comment, quote "Just like traditional hard IRQ handlers, we expect SDIO IRQ handlers to be quick and to the point, so that the holding of the host lock does not cover too much work that doesn't require that lock to be held." The RS911x interrupt handler does not fit that. This patch therefore changes it such that the entire IRQ handler is moved to the RX thread instead, and the interrupt handler only wakes the RX thread. This is OK, because the interrupt handler only does things which can also be done in the RX thread, that is, it checks for firmware loading error(s), it checks buffer status, it checks whether a packet arrived and if so, reads out the packet and passes it to network stack. Moreover, this change permits removal of a code which allocated an skbuff only to get 4-byte-aligned buffer, read up to 8kiB of data into the skbuff, queue this skbuff into local private queue, then in RX thread, this buffer is dequeued, the data in the skbuff as passed to the RSI driver core, and the skbuff is deallocated. All this is replaced by directly calling the RSI driver core with local buffer. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Angus Ainslie <angus@akkea.ca> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Martin Kepplinger <martink@posteo.de> Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201103180941.443528-1-marex@denx.de
2020-11-07rsi: rsi_91x_usb_ops: Source file headers are not good candidates for kernel-docLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_usb_ops.c:22: warning: Incorrect use of kernel-doc format: * rsi_usb_rx_thread() - This is a kernel thread to receive the packets from drivers/net/wireless/rsi/rsi_91x_usb_ops.c:29: warning: Function parameter or member 'common' not described in 'rsi_usb_rx_thread' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-5-lee.jones@linaro.org
2020-11-07rsi: rsi_91x_usb: Fix some basic kernel-doc issuesLee Jones1-2/+4
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_usb.c:26: warning: cannot understand function prototype: 'u16 dev_oper_mode = DEV_OPMODE_STA_BT_DUAL; ' drivers/net/wireless/rsi/rsi_91x_usb.c:88: warning: Function parameter or member 'endpoint' not described in 'rsi_write_multiple' drivers/net/wireless/rsi/rsi_91x_usb.c:88: warning: Excess function parameter 'addr' description in 'rsi_write_multiple' drivers/net/wireless/rsi/rsi_91x_usb.c:320: warning: Function parameter or member 'ep_num' not described in 'rsi_rx_urb_submit' drivers/net/wireless/rsi/rsi_91x_usb.c:320: warning: Function parameter or member 'mem_flags' not described in 'rsi_rx_urb_submit' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-3-lee.jones@linaro.org
2020-11-07rsi: Fix TX EAPOL packet handling against iwlwifi APMarek Vasut1-1/+2
In case RSI9116 SDIO WiFi operates in STA mode against Intel 9260 in AP mode, the association fails. The former is using wpa_supplicant during association, the later is set up using hostapd: iwl$ cat hostapd.conf interface=wlp1s0 ssid=test country_code=DE hw_mode=g channel=1 wpa=2 wpa_passphrase=test wpa_key_mgmt=WPA-PSK iwl$ hostapd -d hostapd.conf rsi$ wpa_supplicant -i wlan0 -c <(wpa_passphrase test test) The problem is that the TX EAPOL data descriptor RSI_DESC_REQUIRE_CFM_TO_HOST flag and extended descriptor EAPOL4_CONFIRM frame type are not set in case the AP is iwlwifi, because in that case the TX EAPOL packet is 2 bytes shorter. The downstream vendor driver has this change in place already [1], however there is no explanation for it, neither is there any commit history from which such explanation could be obtained. [1] https://github.com/SiliconLabs/RS911X-nLink-OSD/blob/master/rsi/rsi_91x_hal.c#L238 Signed-off-by: Marek Vasut <marex@denx.de> Cc: Angus Ainslie <angus@akkea.ca> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Martin Kepplinger <martink@posteo.de> Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201015111616.429220-1-marex@denx.de
2020-09-01rsi: rsi_91x_sdio_ops: File headers are not good kernel-doc candidatesLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_sdio_ops.c:24: warning: Incorrect use of kernel-doc format: * rsi_sdio_master_access_msword() - This function sets the AHB master access drivers/net/wireless/rsi/rsi_91x_sdio_ops.c:32: warning: Function parameter or member 'adapter' not described in 'rsi_sdio_master_access_msword' drivers/net/wireless/rsi/rsi_91x_sdio_ops.c:32: warning: Function parameter or member 'ms_word' not described in 'rsi_sdio_master_access_msword' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200826093401.1458456-23-lee.jones@linaro.org
2020-09-01rsi: rsi_91x_sdio: Fix a few kernel-doc related issuesLee Jones1-4/+3
- File headers do not make for good kernel-doc candidates - Kernel-doc header lines should start with " *" - Fix doc-rot issue Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_sdio.c:25: warning: cannot understand function prototype: 'u16 dev_oper_mode = DEV_OPMODE_STA_BT_DUAL; ' drivers/net/wireless/rsi/rsi_91x_sdio.c:802: warning: bad line: from the device. drivers/net/wireless/rsi/rsi_91x_sdio.c:842: warning: Function parameter or member 'pfunction' not described in 'rsi_init_sdio_interface' drivers/net/wireless/rsi/rsi_91x_sdio.c:842: warning: Excess function parameter 'pkt' description in 'rsi_init_sdio_interface' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200826093401.1458456-17-lee.jones@linaro.org
2020-09-01rsi: Source file headers are not suitable for kernel-docLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_debugfs.c:21: warning: Incorrect use of kernel-doc format: * rsi_sdio_stats_read() - This function returns the sdio status of the driver. drivers/net/wireless/rsi/rsi_91x_debugfs.c:28: warning: Function parameter or member 'seq' not described in 'rsi_sdio_stats_read' drivers/net/wireless/rsi/rsi_91x_debugfs.c:28: warning: Function parameter or member 'data' not described in 'rsi_sdio_stats_read' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200821071644.109970-21-lee.jones@linaro.org
2020-09-01rsi: File headers are not suitable for kernel-docLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_coex.c:24: warning: Function parameter or member 'coex_cb' not described in 'rsi_coex_determine_coex_q' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200821071644.109970-15-lee.jones@linaro.org
2020-09-01rsi: Source file headers do not make good kernel-doc candidatesLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_ps.c:26: warning: Function parameter or member 'state' not described in 'str_psstate' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200821071644.109970-11-lee.jones@linaro.org
2020-09-01rsi: Add descriptions for rsi_set_vap_capabilities()'s parametersLee Jones1-0/+3
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_mgmt.c:713: warning: Function parameter or member 'mac_addr' not described in 'rsi_set_vap_capabilities' drivers/net/wireless/rsi/rsi_91x_mgmt.c:713: warning: Function parameter or member 'vap_id' not described in 'rsi_set_vap_capabilities' drivers/net/wireless/rsi/rsi_91x_mgmt.c:713: warning: Function parameter or member 'vap_status' not described in 'rsi_set_vap_capabilities' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200821071644.109970-7-lee.jones@linaro.org
2020-09-01rsi: Add description for function param 'sta'Lee Jones1-0/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_mac80211.c:1021: warning: Function parameter or member 'sta' not described in 'rsi_mac80211_set_key' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200821071644.109970-3-lee.jones@linaro.org
2020-09-01rsi: File header comments should not be kernel-docLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_hal.c:25: warning: cannot understand function prototype: 'struct ta_metadata metadata_flash_content[] = ' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200819072402.3085022-24-lee.jones@linaro.org
2020-09-01rsi: Fix a myriad of documentation issuesLee Jones1-9/+21
Too many, not enough, misnamed and formatting problems, all resolved. Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_mgmt.c:24: warning: cannot understand function prototype: 'struct bootup_params boot_params_20 = ' drivers/net/wireless/rsi/rsi_91x_mgmt.c:487: warning: Excess function parameter 'type' description in 'rsi_mgmt_pkt_to_core' drivers/net/wireless/rsi/rsi_91x_mgmt.c:538: warning: Function parameter or member 'sta_id' not described in 'rsi_hal_send_sta_notify_frame' drivers/net/wireless/rsi/rsi_91x_mgmt.c:538: warning: Function parameter or member 'vif' not described in 'rsi_hal_send_sta_notify_frame' drivers/net/wireless/rsi/rsi_91x_mgmt.c:615: warning: Function parameter or member 'sta_id' not described in 'rsi_send_aggregation_params_frame' drivers/net/wireless/rsi/rsi_91x_mgmt.c:711: warning: Function parameter or member 'mode' not described in 'rsi_set_vap_capabilities' drivers/net/wireless/rsi/rsi_91x_mgmt.c:711: warning: Function parameter or member 'mac_addr' not described in 'rsi_set_vap_capabilities' drivers/net/wireless/rsi/rsi_91x_mgmt.c:711: warning: Function parameter or member 'vap_id' not described in 'rsi_set_vap_capabilities' drivers/net/wireless/rsi/rsi_91x_mgmt.c:711: warning: Function parameter or member 'vap_status' not described in 'rsi_set_vap_capabilities' drivers/net/wireless/rsi/rsi_91x_mgmt.c:711: warning: Excess function parameter 'opmode' description in 'rsi_set_vap_capabilities' drivers/net/wireless/rsi/rsi_91x_mgmt.c:794: warning: Function parameter or member 'sta_id' not described in 'rsi_hal_load_key' drivers/net/wireless/rsi/rsi_91x_mgmt.c:794: warning: Function parameter or member 'vif' not described in 'rsi_hal_load_key' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1053: warning: Function parameter or member 'curchan' not described in 'rsi_band_check' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1173: warning: Excess function parameter 'channel' description in 'rsi_send_radio_params_update' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1299: warning: Function parameter or member 'sta' not described in 'rsi_send_auto_rate_request' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1299: warning: Function parameter or member 'sta_id' not described in 'rsi_send_auto_rate_request' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1299: warning: Function parameter or member 'vif' not described in 'rsi_send_auto_rate_request' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1459: warning: Function parameter or member 'opmode' not described in 'rsi_inform_bss_status' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1459: warning: Function parameter or member 'addr' not described in 'rsi_inform_bss_status' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1459: warning: Function parameter or member 'sta' not described in 'rsi_inform_bss_status' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1459: warning: Function parameter or member 'sta_id' not described in 'rsi_inform_bss_status' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1459: warning: Function parameter or member 'assoc_cap' not described in 'rsi_inform_bss_status' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1459: warning: Function parameter or member 'vif' not described in 'rsi_inform_bss_status' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1459: warning: Excess function parameter 'bssid' description in 'rsi_inform_bss_status' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1543: warning: Function parameter or member 'common' not described in 'rsi_send_block_unblock_frame' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1543: warning: Function parameter or member 'block_event' not described in 'rsi_send_block_unblock_frame' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1587: warning: Excess function parameter 'Return' description in 'rsi_send_rx_filter_frame' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200819072402.3085022-21-lee.jones@linaro.org
2020-09-01rsi: Fix a few kerneldoc misdemeanoursLee Jones1-4/+5
- File headers should not be kernel-doc - Misnaming issues - Missing function parameter documentation Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_mac80211.c:24: warning: cannot understand function prototype: 'const struct ieee80211_channel rsi_2ghz_channels[] = ' drivers/net/wireless/rsi/rsi_91x_mac80211.c:739: warning: Function parameter or member 'vif' not described in 'rsi_get_connected_channel' drivers/net/wireless/rsi/rsi_91x_mac80211.c:739: warning: Excess function parameter 'adapter' description in 'rsi_get_connected_channel' drivers/net/wireless/rsi/rsi_91x_mac80211.c:868: warning: Function parameter or member 'changed_flags' not described in 'rsi_mac80211_conf_filter' drivers/net/wireless/rsi/rsi_91x_mac80211.c:868: warning: Excess function parameter 'changed' description in 'rsi_mac80211_conf_filter' drivers/net/wireless/rsi/rsi_91x_mac80211.c:946: warning: Function parameter or member 'sta' not described in 'rsi_hal_key_config' drivers/net/wireless/rsi/rsi_91x_mac80211.c:1245: warning: Function parameter or member 'vif' not described in 'rsi_perform_cqm' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200819072402.3085022-19-lee.jones@linaro.org
2020-09-01rsi: Fix misnamed function parameter 'rx_pkt'Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_main.c:157: warning: Function parameter or member 'rx_pkt' not described in 'rsi_read_pkt' drivers/net/wireless/rsi/rsi_91x_main.c:157: warning: Excess function parameter 'rcv_pkt' description in 'rsi_read_pkt' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200819072402.3085022-18-lee.jones@linaro.org
2020-09-01rsi: File header should not be kernel-docLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_core.c:23: warning: Incorrect use of kernel-doc format: * rsi_determine_min_weight_queue() - This function determines the queue with drivers/net/wireless/rsi/rsi_91x_core.c:30: warning: Function parameter or member 'common' not described in 'rsi_determine_min_weight_queue' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200819072402.3085022-4-lee.jones@linaro.org
2020-09-01rsi: Fix some kernel-doc issuesLee Jones1-2/+3
The file header should not be kernel-doc. Add missing 'rec_pkt' description. Update 'rsi_91x_init()'s parameter description. Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_main.c:17: warning: Function parameter or member 'fmt' not described in 'pr_fmt' drivers/net/wireless/rsi/rsi_91x_main.c:156: warning: Function parameter or member 'rx_pkt' not described in 'rsi_read_pkt' drivers/net/wireless/rsi/rsi_91x_main.c:287: warning: Function parameter or member 'oper_mode' not described in 'rsi_91x_init' drivers/net/wireless/rsi/rsi_91x_main.c:287: warning: Excess function parameter 'void' description in 'rsi_91x_init' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200819072402.3085022-3-lee.jones@linaro.org
2020-07-13mmc: sdio: Move SDIO IDs from rsi_sdio driver to common include filePali Rohár2-8/+4
Define appropriate macro names for consistency with other macros. Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20200629072144.24351-1-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-6/+6
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-14rsi: fix a typo "throld" -> "threshold"Qiujun Huang1-1/+1
There is a typo in debug message. Fix it. s/throld/threshold Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1585837078-6149-1-git-send-email-hqjagain@gmail.com
2020-02-12rsi: fix null pointer dereference during rsi_shutdown()Martin Kepplinger1-3/+6
Appearently the hw pointer can be NULL while the module is loaded and in that case rsi_shutdown() crashes due to the unconditional dereference. Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rsi_91x_usb: fix interface sanity checkJohan Hovold1-1/+1
Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: dad0d04fa7ba ("rsi: Add RS9113 wireless driver") Cc: stable <stable@vger.kernel.org> # 3.15 Cc: Fariya Fatima <fariyaf@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rsi: add missing endpoint sanity checksJohan Hovold1-2/+10
The driver expects at least one bulk-in endpoint when in "wifi-alone" operating mode and two bulk-in endpoints otherwise, and would otherwise fail to to submit the corresponding bulk URB to the default pipe during probe with a somewhat cryptic message: rsi_91x: rsi_rx_urb_submit: Failed in urb submission rsi_91x: rsi_probe: Failed in probe...Exiting RSI-USB WLAN: probe of 2-2.4:1.0 failed with error -8 The current endpoint sanity check looks broken and would only bail out early if there was no bulk-in endpoint but at least one bulk-out endpoint. Tighten this check to always require at least one bulk-in and one bulk-out endpoint, and add the missing sanity check for a Bluetooth bulk-in endpoint when in a BT operating mode. Also make sure to log an informative error message when the expected endpoints are missing. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rsi: fix non-atomic allocation in completion handlerJohan Hovold1-6/+7
USB completion handlers are called in atomic context and must specifically not allocate memory using GFP_KERNEL. Fixes: a1854fae1414 ("rsi: improve RX packet handling in USB interface") Cc: stable <stable@vger.kernel.org> # 4.17 Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rsi: fix memory leak on failed URB submissionJohan Hovold1-1/+3
Make sure to free the skb on failed receive-URB submission (e.g. on disconnect or currently also due to a missing endpoint). Fixes: a1854fae1414 ("rsi: improve RX packet handling in USB interface") Cc: stable <stable@vger.kernel.org> # 4.17 Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rsi: fix use-after-free on probe errorsJohan Hovold1-6/+6
The driver would fail to stop the command timer in most error paths, something which specifically could lead to the timer being freed while still active on I/O errors during probe. Fix this by making sure that each function starting the timer also stops it in all relevant error paths. Reported-by: syzbot+1d1597a5aa3679c65b9f@syzkaller.appspotmail.com Fixes: b78e91bcfb33 ("rsi: Add new firmware loading method") Cc: stable <stable@vger.kernel.org> # 4.12 Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rsi: fix use-after-free on failed probe and unbindJohan Hovold1-1/+17
Make sure to stop both URBs before returning after failed probe as well as on disconnect to avoid use-after-free in the completion handler. Reported-by: syzbot+b563b7f8dbe8223a51e8@syzkaller.appspotmail.com Fixes: a4302bff28e2 ("rsi: add bluetooth rx endpoint") Fixes: dad0d04fa7ba ("rsi: Add RS9113 wireless driver") Cc: stable <stable@vger.kernel.org> # 3.15 Cc: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com> Cc: Fariya Fatima <fariyaf@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-05Merge tag 'wireless-drivers-next-2019-11-05' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-nextDavid S. Miller2-2/+3
Kalle Valo says: ==================== wireless-drivers-next patches for 5.5 First set of patches for 5.5. The most active driver here clearly is rtw88, lots of patches for it. More quiet on other drivers, smaller fixes and cleanups all over. This pull request also has a trivial conflict, the report and example resolution here: https://lkml.kernel.org/r/20191031111242.50ab1eca@canb.auug.org.au Major changes: rtw88 * add deep power save support * add mac80211 software tx queue (wake_tx_queue) support * enable hardware rate control * add TX-AMSDU support * add NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 support * add power tracking support * add 802.11ac beamformee support * add set_bitrate_mask support * add phy_info debugfs to show Tx/Rx physical status * add RFE type 3 support for 8822b ath10k * add support for hardware rfkill on devices where firmware supports it rtl8xxxu * add bluetooth co-existence support for single antenna iwlwifi * Revamp the debugging infrastructure ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-09rsi: drop bogus device-id checks from probeJohan Hovold1-2/+2
USB core will never call a USB-driver probe function with a NULL device-id pointer. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-09Revert "rsi: fix potential null dereference in rsi_probe()"Johan Hovold1-1/+1
This reverts commit f170d44bc4ec2feae5f6206980e7ae7fbf0432a0. USB core will never call a USB-driver probe function with a NULL device-id pointer. Reverting before removing the existing checks in order to document this and prevent the offending commit from being "autoselected" for stable. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-04rsi: fix potential null dereference in rsi_probe()Denis Efremov1-1/+1
The id pointer can be NULL in rsi_probe(). It is checked everywhere except for the else branch in the idProduct condition. The patch adds NULL check before the id dereference in the rsi_dbg() call. Fixes: 54fdb318c111 ("rsi: add new device model for 9116") Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-04mac80211: simplify TX aggregation startJohannes Berg1-2/+1
There really is no need to make drivers call the ieee80211_start_tx_ba_cb_irqsafe() function and then schedule the worker if all we want is to set a bit. Add a new return value (that was previously considered invalid) to indicate that the driver is immediately ready for the session, and make drivers use it. The only drivers that remain different are the Intel ones as they need to negotiate more with the firmware. Link: https://lore.kernel.org/r/1570007543-I152912660131cbab2e5d80b4218238c20f8a06e5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-01rsi: release skb if rsi_prepare_beacon failsNavid Emamdoost1-0/+1
In rsi_send_beacon, if rsi_prepare_beacon fails the allocated skb should be released. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+0
Minor overlapping changes in the btusb and ixgbe drivers. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-03rsi: fix a double free bug in rsi_91x_deinit()Hui Peng1-1/+0
`dev` (struct rsi_91x_usbdev *) field of adapter (struct rsi_91x_usbdev *) is allocated and initialized in `rsi_init_usb_interface`. If any error is detected in information read from the device side, `rsi_init_usb_interface` will be freed. However, in the higher level error handling code in `rsi_probe`, if error is detected, `rsi_91x_deinit` is called again, in which `dev` will be freed again, resulting double free. This patch fixes the double free by removing the free operation on `dev` in `rsi_init_usb_interface`, because `rsi_91x_deinit` is also used in `rsi_disconnect`, in that code path, the `dev` field is not (and thus needs to be) freed. This bug was found in v4.19, but is also present in the latest version of kernel. Fixes CVE-2019-15504. Reported-by: Hui Peng <benquike@gmail.com> Reported-by: Mathias Payer <mathias.payer@nebelwelt.net> Signed-off-by: Hui Peng <benquike@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-08-19Merge tag 'wireless-drivers-next-for-davem-2019-08-19' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-nextDavid S. Miller1-17/+14
Kalle Valo says: ==================== wireless-drivers-next patches for 5.4 First set of patches for 5.4. Major changes: brcmfmac * enable 160 MHz channel support rt2x00 * add support for PLANEX GW-USMicroN USB device rtw88 * add Bluetooth coexistance support ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06rsi: fix for sdio reset card issueGanapathi Kondraju1-10/+7
Issue: While removing and inserting the driver module, observed driver loading is not successful. Root cause: Card is not resetted completely without issuing cmd5. Fix: Issued cmd5 properly. Signed-off-by: Ganapathi Kondraju <ganapathirajukondraju@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-08-06rsi: fix for sdio interface setup in 9116Ganapathi Kondraju1-4/+4
Issue: RS-9116 Card is not responding after firmware got loaded. Root cause: After firmware got loaded, we need to reset the program counter and few device specific registers. Those registers were not resetted properly. Fix: Properly resetting those registers. Signed-off-by: Ganapathi Kondraju <ganapathirajukondraju@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-07-26mac80211: pass the vif to cancel_remain_on_channelEmmanuel Grumbach1-1/+2
This low level driver can find it useful to get the vif when a remain on channel session is cancelled. iwlwifi will need this soon. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://lore.kernel.org/r/20190723180001.5828-1-emmanuel.grumbach@intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.