aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/rt2x00/rt2x00link.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2010-07-12rt2x00: Rename CONFIG_DISABLE_LINK_TUNINGIvo van Doorn9-17/+13
Rename CONFIG_DISABLE_LINK_TUNING to DRIVER_SUPPORT_LINK_TUNING Link tuning support is not only based on EEPROM decisions, but also if the device actually supports it. Currently only rt2500usb doesn't support link tuning because of hardware problems. But rt2800usb is also suspected of having problems with link tuning. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-12rt2x00: Convert AGC value from descriptor to RSSI (dBm)Ivo van Doorn5-10/+55
The RSSI values in the RXWI descriptor aren't true RSSI values. Instead they are more like the AGC values similar to rt61pci. And as such, it needs the same conversion before it can be passed to rt2x00lib/mac80211. This requires the struct queue_entry to be passed to rt2800_process_rxwi rather then the skb structure which is contained in the queue_entry. This is required to obtain the lna_gain information from the rt2x00_dev structure. This fixes connection problems when using wpa_supplicant which would try to connect to the worst AP's rather then the best ones. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-12rt2x00: Limit txpower by eeprom valuesHelmut Schaa2-53/+120
Limit the txpower per rate by the approriate values in the eeprom. This avoids too high txpower values resulting in bad tx performance. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-12hostap: fixup strlen() mathDan Carpenter1-1/+1
In hostap_add_interface() we do: sprintf(dev->name, "%s%s", prefix, name); dev->name has IFNAMSIZ (16) characters. prefix is local->dev->name. name is "wds%d" strlen() returns the number of characters in the string not counting the NULL so if we have a string with 11 characters we get "12345678901wds%d" which is 16 characters and a NULL so we're past the end of the array. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-12adm8211: fix memory leakKulikov Vasiliy1-1/+4
We must free priv->eeprom allocated in adm8211_read_eeprom(). Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-12prism54: call BUG_ON() earlierDan Carpenter1-1/+1
This test is off by one because strlen() doesn't include the NULL terminator. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-12wl1271: use __packed annotationLuciano Coelho2-5/+5
This patch changes __attribute__ ((packed)) annotations to __packed in wl1271 code that was introduced in a recent patch in wireless-testing. Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-12libertas: Added support for host sleep featureAmitkumar Karwar5-33/+142
Existing "ethtool -s ethX wol X" command configures hostsleep parameters, but those are activated only during suspend/resume, there is no way to configure host sleep without actual suspend. This patch adds debugfs command to enable/disable host sleep based on already configured host sleep parameters using wol command. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-12cfg80211: ignore spurious deauthJohannes Berg1-4/+4
Ever since mac80211/drivers are no longer fully in charge of keeping track of the auth status, trying to make them do so will fail. Instead of warning and reporting the deauthentication to userspace, cfg80211 must simply ignore it so that spurious deauthentications, e.g. before starting authentication, aren't seen by userspace as actual deauthentications. Cc: stable@kernel.org Reported-by: Paul Stewart <pstew@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-12MAINTAINERS: mark adm8211 as an orphanJohn W. Linville1-3/+1
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-12net/core: EXPORT_SYMBOL cleanupsEric Dumazet13-53/+32
CodingStyle cleanups EXPORT_SYMBOL should immediately follow the symbol declaration. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-12net/ipv4: EXPORT_SYMBOL cleanupsEric Dumazet22-140/+67
CodingStyle cleanups EXPORT_SYMBOL should immediately follow the symbol declaration. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-11ac3200: fix error pathKulikov Vasiliy1-1/+1
Do not call free_irq() if request_irq() failed. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-11at1700: fix double free_irqKulikov Vasiliy1-3/+1
free_irq() is called both in net_close() and cleanup_card(). Since it is requested in at1700_probe1(), leave free_irq() only in cleanup_card() for balance. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-11cxgb4: exclude registers with read side effects from register dumpsDimitris Michailidis1-10/+13
A few registers have side effects on reads, eg FIFO pointers that auto advance or mailboxes which change ownership when read. They are unsafe to read so exclude them from ethtool register dumps. Bump ethtool_regs.version to indicate the changed register set. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-11cxgb4: implement the ETHTOOL_GRXFH commandDimitris Michailidis3-1/+65
Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-11cxgb4: add user manipulation of the RSS tableDimitris Michailidis2-16/+98
Implement the get_rxnfc, get_rxfh_indir, and set_rxfh_indir ethtool methods for user manipulation of the RSS table. Besides the methods themselves the rest of the changes here store, initialize, and write the table contents. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-11cxgb4: avoid duplicating some resource freeing codeDimitris Michailidis1-17/+25
Currently there are two copies of some resource freeing code, turn it into a function and call it. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-11cxgb4: move the choice of interrupt type before net_device registrationDimitris Michailidis1-6/+7
We need to settle on the kind of interrupts we'll be using, a choice that also impacts the number of queues, before registering and making visible the net_devices. Move the relevant code up a bit. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-11tg3: Update version to 3.112Matt Carlson1-2/+2
This patch updates the tg3 version to 3.112. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-11tg3: Fix some checkpatch errorsMatt Carlson1-8/+9
This patch fixes the following checkpatch errors: ERROR: do not use assignment in if condition + if ((mss = skb_shinfo(skb)->gso_size) != 0) { ERROR: do not use assignment in if condition + if ((mss = skb_shinfo(skb)->gso_size) != 0) { ERROR: space prohibited after that '!' (ctx:BxW) + if (! netif_carrier_ok(tp->dev) && ^ ERROR: space required after that ',' (ctx:VxV) +#define GET_REG32_LOOP(base,len) \ ^ ERROR: "(foo*)" should be "(foo *)" + memcpy(data, ((char*)&val) + b_offset, b_count); ERROR: do not use assignment in if condition + if ((err = tg3_do_mem_test(tp, mem_tbl[i].offset, Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-11tg3: Revert PCIe tx glitch fixMatt Carlson2-46/+0
This patch reverts commit 52cdf8526fe24f11d300b75458ddee017f3f4c88, entitled "tg3: Prevent a PCIe tx glitch". The problem does not have any visible side-effects and happens too early for the driver to do anything about it. The proper place for this code is within the device's bootcode. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-11tg3: Report driver version to firmwareMatt Carlson2-3/+9
This patch changes the code so that the driver version can be reported to the firmware in addition to the current use. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-11tg3: Relax 5717 serdes restrictionMatt Carlson1-3/+2
tg3 is coded to refuse to attach to 5717 serdes devices. Now that the hardware is better supported, we can relax this restriction. This patch also fixes a recently introduced bug which will cause serdes parallel detection not to work with 5780 class devices. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-11tg3: Fix IPv6 TSO code in tg3_start_xmit_dma_bug()Matt Carlson1-6/+14
The tg3_start_xmit_dma_bug() function was missing code to process IPv6 TSO packets. This patch adds the missing support. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-11tg3: Fix single MSI-X vector coalescingMatt Carlson1-1/+1
The interrupt coalescing setup code used the TG3_FLG2_USING_MSIX flag to determine whether or not to configure the rx coalescing parameters. This is incorrect for the single MSI-X vector case. This patch changes the code to look at the TG3_FLG3_ENABLE_RSS instead. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-11tg3: Revert RSS indir tbl setup changeMatt Carlson1-1/+1
This patch reverts commit 2601d8a0049c8b5d29cd5adb844a305a804e505f. A spectacular set of coincidences made it look as though the table was setup incorrectly. The original version was correct. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-1082596: free resources on errorKulikov Vasiliy1-8/+22
IRQ 56 was not freed anywhere (neither in i596_open() on error nor in i596_close()), rx_bufs were not freed if init_i596_mem() fails, netif_stop_queue() was not called. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-1082596: do not panic on out of memoryKulikov Vasiliy1-16/+26
If dev_alloc_skb() failed then free already allocated skbs. remove_rx_bufs() can be called multiple times, so set rbd->skb to NULL to avoid double free. remove_rx_bufs() was moved upwards to be seen by init_rx_bufs(). Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-10be2net: Patch to determine if function is VF while running in guest OS.Sarveshwar Bandi2-1/+12
When driver is loaded in guest OS, the pci variables is_virtfn and is_physfn are both set to 0. This change uses registers in controller to determine the same. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-10macvtap: Use dev_t for macvtap_major.David S. Miller1-1/+1
Reported-by: "Robert P. J. Day" <rpjday@crashcourse.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09qlcnic: Disable admin tools interface for VF driver modeAnirban Chakraborty1-1/+4
Non privileged (VF) driver will not be able to carry out any of the FW update, etc. operations. Disable the tools interface by not creating the sysfs nodes. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09qlcnic: Check FW capability for TSOAnirban Chakraborty3-6/+14
Driver checks TSO capability from FW before enabling it. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09net: Document that dev_get_stats() returns the given pointerBen Hutchings2-8/+8
Document that dev_get_stats() returns the same stats pointer it was given. Remove const qualification from the returned pointer since the caller may do what it likes with that structure. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09net: Get rid of rtnl_link_stats64 / net_device_stats unionBen Hutchings4-49/+56
In commit be1f3c2c027cc5ad735df6a45a542ed1db7ec48b "net: Enable 64-bit net device statistics on 32-bit architectures" I redefined struct net_device_stats so that it could be used in a union with struct rtnl_link_stats64, avoiding the need for explicit copying or conversion between the two. However, this is unsafe because there is no locking required and no lock consistently held around calls to dev_get_stats() and use of the statistics structure it returns. In commit 28172739f0a276eb8d6ca917b3974c2edb036da3 "net: fix 64 bit counters on 32 bit arches" Eric Dumazet dealt with that problem by requiring callers of dev_get_stats() to provide storage for the result. This means that the net_device::stats64 field and the padding in struct net_device_stats are now redundant, so remove them. Update the comment on net_device_ops::ndo_get_stats64 to reflect its new usage. Change dev_txq_stats_fold() to use struct rtnl_link_stats64, since that is what all its callers are really using and it is no longer going to be compatible with struct net_device_stats. Eric Dumazet suggested the separate function for the structure conversion. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09iwlagn: fix the bit mask of a FH register in stop Tx DMA flowEmmanuel Grumbach2-8/+6
When we stop the Tx DMA channels, we poll bits 16:31 in FH_TSSR_RX_STATUS_REG. From 4965 and up, only the bits 16:26 are legal. Bits 27:31 are not used and are always unset. Polling them will lead to fail on timeout but since the timeout is quite small, the stall was not felt. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-09iwlagn: more generic description for iwlagn devicesWey-Yi Guy1-2/+7
Intel Wireless WiFi Next Gen AGN support two major categories: 1. Intel Wireless WiFi 4965 AGN device 2. Intel Wireless-N/Advanced-N/Ultimate-N family Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-09iwlwifi: correct descriptions of advanced ucode errorsJay Sternberg1-6/+30
ucode errors were redefined in new ucode images and all new errors were showing as advanced sysasserts which was misleading. new errors are not sequential so additional lookup table added. errors do not overlap so both are used to support older and newer ucode images. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-09iwlwifi: enable 6050 series Gen2 devicesShanyu Zhao5-0/+52
To enable 6050 series Gen 2 devices: 1) new PCI_IDs are added; 2) new EEPROM version and calibration version numbers defined; 3) new hardware REV number defined; Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-09usb/atm/ueagle-atm.c: call atm_dev_signal_change() when signal changes.Karl Hiramoto1-3/+10
Propagate signal changes to upper atm layer. Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09usb/atm/speedtch.c: call atm_dev_signal_change() when signal changes.Karl Hiramoto1-5/+5
Propagate signal changes to upper atm layer. Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09usb/atm/cxacru.c: call atm_dev_signal_change() when signal changes.Karl Hiramoto1-9/+9
Propagate signal changes to upper atm layer. Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09atm/suni.c: call atm_dev_signal_change() when signal changes.Karl Hiramoto1-2/+3
Propagate changes to upper atm layer. Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09atm/solos-pci: call atm_dev_signal_change() when signal changes.Karl Hiramoto1-3/+3
Propagate changes to upper atm layer, so userspace netmontor knows when DSL showtime reached. Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09atm/idt77105.c: call atm_dev_signal_change() when signal changes.Karl Hiramoto1-5/+6
Propagate changes to upper atm layer. Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09atm/adummy: add syfs DEVICE_ATTR to change signalKarl Hiramoto1-0/+39
Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09atm/br2684: register notifier event for carrier signal changes.Karl Hiramoto1-2/+64
When a signal change event occurs call netif_carrier_on/off. Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09atm: propagate signal changes via notifierKarl Hiramoto2-0/+47
Add notifier chain for changes in atm_dev. Clients like br2684 will call register_atmdevice_notifier() to be notified of changes. Drivers will call atm_dev_signal_change() to notify clients like br2684 of the change. On DSL and ATM devices it's usefull to have a know if you have a carrier signal. netdevice LOWER_UP changes can be propagated to userspace via netlink monitor. Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08cxgb4vf: Implement "Unhandled Interrupts" statisticCasey Leedom2-3/+8
Implement "Unhandled Interrupts" statistic so we can detect when the hardware tells us that it things we have work to do but we don't find anything ... Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08fec_mpc52xx: fix error pathKulikov Vasiliy1-21/+17
Error path in mpc52xx_fec_probe() is broken. We must free everything that we've allocated. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.