aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/wl12xx/wl1251_boot.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2009-11-18wl1251: add NVS in EEPROM supportDavid-John Willis1-7/+13
wl1251 supports also that NVS is stored in a separate EEPROM, add support for that. kvalo: use platform data instead Kconfig and use kernel style Signed-off-by: David-John Willis <John.Willis@Distant-earth.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: Filter out unwanted eventsJanne Ylalehto1-2/+6
Filter out unwanted events to reduce wakeups. Signed-off-by: Janne Ylalehto <janne.ylalehto@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18wl1251: allocate space for firmware with vmalloc()Kalle Valo1-5/+22
Earlier firmware was stored to a memory area allocated with kmalloc() but finding a a contiguous area of memory long enough for the firmware is very difficult in certain cases. better to allocate the memory for firmware with vmalloc() instead and use a small buffer for DMA transfers. Thanks to Eero Tamminen for the idea. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20wl1251: halt the embedded CPU before loading firmwareBob Copeland1-0/+3
After initial power-up, the embedded cpu is usually halted. However, if we down the interface and only do a soft reset before bringing the interface back up, it will still be running and the firmware loading code will bail out. This change halts the CPU before loading the firmware, enabling a second call to wl1251_boot() to succeed without a hard reset. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: rename reg.h to wl1251_reg.hKalle Valo1-1/+1
Now that wl1271 doesn't use reg.h anymore, it can be renamed to wl1251_reg.h. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: remove wl1251_opsKalle Valo1-11/+245
Now wl1271 is splitted to separate files, no need to use wl1251_ops anymore. So remove struct wl1251_chip and wl1251_ops.c. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: make irq handling interface specificBob Copeland1-6/+1
In SDIO, the host driver requests the IRQ and invokes a callback to the card driver. This differs from SPI, so the relevant code needs to be interface-specific. This patch pushes the irq code down into _spi.c and _sdio.c, and adds enable/disable callbacks. This fixes the following warning: [ 566.343887] ------------[ cut here ]------------ [ 566.349105] WARNING: at kernel/irq/manage.c:222 __enable_irq+0x3c/0x6c() [ 566.356735] Unbalanced enable for IRQ 0 [ 566.361099] Modules linked in: msm_wifi wl12xx_sdio wl12xx mac80211 cfg80211 rfkill_backport lib80211_crypt_ccmp lib80211_crypt_wep lib80211_crypt_tkip lib80211 [ 566.381240] [<c025acec>] (dump_stack+0x0/0x14) from [<c004b610>] (warn_slowpath+0x70/0x8c) [ 566.391860] [<c004b5a0>] (warn_slowpath+0x0/0x8c) from [<c0077c10>] (__enable_irq+0x3c/0x6c) [ 566.402572] r3:00000000 r2:c02cad13 [ 566.407516] r7:00001002 r6:00000000 r5:c0310be4 r4:c0310be4 [ 566.415786] [<c0077bd4>] (__enable_irq+0x0/0x6c) from [<c0077fd0>] (enable_irq+0x38/0x64) [ 566.425826] r5:c0310be4 r4:a0000013 [ 566.430709] [<c0077f98>] (enable_irq+0x0/0x64) from [<bf0dfa78>] (wl12xx_boot_run_firmware+0xfc/0x170 [wl12xx]) [ 566.442947] r7:00001002 r6:c440a9fc r5:00000072 r4:c440a9e0 [ 566.450851] [<bf0df97c>] (wl12xx_boot_run_firmware+0x0/0x170 [wl12xx]) from [<bf0e05f0>] (wl1251_boot+0xd4/0x108 [wl12xx]) [ 566.464492] r5:00000000 r4:c440a9e0 [ 566.469466] [<bf0e051c>] (wl1251_boot+0x0/0x108 [wl12xx]) from [<bf0dd27c>] (wl12xx_op_start+0x54/0xb8 [wl12xx]) [ 566.482162] r5:00000000 r4:c440a9e0 [ 566.487472] [<bf0dd228>] (wl12xx_op_start+0x0/0xb8 [wl12xx]) from [<bf0b96dc>] (ieee80211_open+0x2dc/0x720 [mac80211]) [ 566.500594] r7:00001002 r6:c4950800 r5:c440a220 r4:00000000 [ 566.508865] [<bf0b9400>] (ieee80211_open+0x0/0x720 [mac80211]) from [<c01f1edc>] (dev_open+0x9c/0xfc) [ 566.520705] [<c01f1e40>] (dev_open+0x0/0xfc) from [<c01f17dc>] (dev_change_flags+0x98/0x170) [ 566.531417] r5:00000041 r4:c4950800 [ 566.536330] [<c01f1744>] (dev_change_flags+0x0/0x170) from [<c023041c>] (devinet_ioctl+0x3a8/0x784) [ 566.547683] r7:c128e380 r6:00000001 r5:00008914 r4:00000000 [ 566.555587] [<c0230074>] (devinet_ioctl+0x0/0x784) from [<c02318cc>] (inet_ioctl+0xdc/0x114) [ 566.566299] [<c02317f0>] (inet_ioctl+0x0/0x114) from [<c01e1a60>] (sock_ioctl+0x1f0/0x248) [ 566.576827] r5:00008914 r4:c572c1a0 [ 566.581771] [<c01e1870>] (sock_ioctl+0x0/0x248) from [<c00b23a0>] (vfs_ioctl+0x34/0x94) [ 566.592086] r7:c572c1a0 r6:bee497e8 r5:00008914 r4:c572c1a0 [ 566.599990] [<c00b236c>] (vfs_ioctl+0x0/0x94) from [<c00b2a28>] (do_vfs_ioctl+0x52c/0x584) [ 566.610549] r7:c572c1a0 r6:00008914 r5:c572c1a0 r4:c3201228 [ 566.618453] [<c00b24fc>] (do_vfs_ioctl+0x0/0x584) from [<c00b2ac0>] (sys_ioctl+0x40/0x64) [ 566.628890] [<c00b2a80>] (sys_ioctl+0x0/0x64) from [<c0021da0>] (ret_fast_syscall+0x0/0x2c) [ 566.639541] r7:00000036 r6:00000000 r5:00000004 r4:001a11f3 [ 566.647445] ---[ end trace 15c26ef7dd5e7b03 ]--- Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: introduce wl1251_if_operations structBob Copeland1-0/+1
Introduce an ops struct with read, write, and reset functions to abstract away the details of the wl1251 bus interface. Doing this will allow SDIO to coexist with SPI by supplying its own I/O routines. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14wl1251: separate bus i/o code into io.cBob Copeland1-1/+1
In order to eventually support wl1251 spi and sdio interfaces, move the register and memory transfer functions to a common file. Also rename wl1251_spi_mem_{read,write} to indicate its common usage. We still use spi_read internally until SDIO interface is introduced so nothing functional should change here. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl1251: use wl1251 prefix everywhereKalle Valo1-53/+53
Last we can change all code prefixes from wl12xx/WL12XX to wl1251/WL1251. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl1251: add wl1251 prefix to all 1251 filesKalle Valo1-0/+297
Now that all 1271 files are split, we can add wl1251_ prefix to the files. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.