aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/xen-netfront.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-03-18bpf, devmap: Move drop error path to devmap for XDP_REDIRECTLorenzo Bianconi1-9/+9
We want to change the current ndo_xdp_xmit drop semantics because it will allow us to implement better queue overflow handling. This is working towards the larger goal of a XDP TX queue-hook. Move XDP_REDIRECT error path handling from each XDP ethernet driver to devmap code. According to the new APIs, the driver running the ndo_xdp_xmit pointer, will break tx loop whenever the hw reports a tx error and it will just return to devmap caller the number of successfully transmitted frames. It will be devmap responsibility to free dropped frames. Move each XDP ndo_xdp_xmit capable driver to the new APIs: - veth - virtio-net - mvneta - mvpp2 - socionext - amazon ena - bnxt - freescale (dpaa2, dpaa) - xen-frontend - qede - ice - igb - ixgbe - i40e - mlx5 - ti (cpsw, cpsw-new) - tun - sfc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Camelia Groza <camelia.groza@nxp.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Link: https://lore.kernel.org/bpf/ed670de24f951cfd77590decf0229a0ad7fd12f6.1615201152.git.lorenzo@kernel.org
2021-02-04drivers: net: xen-netfront: Simplify the calculation of variablesJiapeng Chong1-1/+1
Fix the following coccicheck warnings: ./drivers/net/xen-netfront.c:1816:52-54: WARNING !A || A && B is equivalent to !A || B. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/1612261069-13315-1-git-send-email-jiapeng.chong@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-16net: ethernet: ibm: ibmvnic: Fix some kernel-doc misdemeanoursLee Jones1-3/+3
Fixes the following W=1 kernel build warning(s): from drivers/net/ethernet/ibm/ibmvnic.c:35: inlined from ‘handle_vpd_rsp’ at drivers/net/ethernet/ibm/ibmvnic.c:4124:3: drivers/net/ethernet/ibm/ibmvnic.c:1362: warning: Function parameter or member 'hdr_field' not described in 'build_hdr_data' drivers/net/ethernet/ibm/ibmvnic.c:1362: warning: Function parameter or member 'skb' not described in 'build_hdr_data' drivers/net/ethernet/ibm/ibmvnic.c:1362: warning: Function parameter or member 'hdr_len' not described in 'build_hdr_data' drivers/net/ethernet/ibm/ibmvnic.c:1362: warning: Function parameter or member 'hdr_data' not described in 'build_hdr_data' drivers/net/ethernet/ibm/ibmvnic.c:1423: warning: Function parameter or member 'hdr_field' not described in 'create_hdr_descs' drivers/net/ethernet/ibm/ibmvnic.c:1423: warning: Function parameter or member 'hdr_data' not described in 'create_hdr_descs' drivers/net/ethernet/ibm/ibmvnic.c:1423: warning: Function parameter or member 'len' not described in 'create_hdr_descs' drivers/net/ethernet/ibm/ibmvnic.c:1423: warning: Function parameter or member 'hdr_len' not described in 'create_hdr_descs' drivers/net/ethernet/ibm/ibmvnic.c:1423: warning: Function parameter or member 'scrq_arr' not described in 'create_hdr_descs' drivers/net/ethernet/ibm/ibmvnic.c:1474: warning: Function parameter or member 'txbuff' not described in 'build_hdr_descs_arr' drivers/net/ethernet/ibm/ibmvnic.c:1474: warning: Function parameter or member 'num_entries' not described in 'build_hdr_descs_arr' drivers/net/ethernet/ibm/ibmvnic.c:1474: warning: Function parameter or member 'hdr_field' not described in 'build_hdr_descs_arr' drivers/net/ethernet/ibm/ibmvnic.c:1832: warning: Function parameter or member 'adapter' not described in 'do_change_param_reset' drivers/net/ethernet/ibm/ibmvnic.c:1832: warning: Function parameter or member 'rwi' not described in 'do_change_param_reset' drivers/net/ethernet/ibm/ibmvnic.c:1832: warning: Function parameter or member 'reset_state' not described in 'do_change_param_reset' drivers/net/ethernet/ibm/ibmvnic.c:1911: warning: Function parameter or member 'adapter' not described in 'do_reset' drivers/net/ethernet/ibm/ibmvnic.c:1911: warning: Function parameter or member 'rwi' not described in 'do_reset' drivers/net/ethernet/ibm/ibmvnic.c:1911: warning: Function parameter or member 'reset_state' not described in 'do_reset' Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-08net, xdp: Introduce xdp_prepare_buff utility routineLorenzo Bianconi1-4/+2
Introduce xdp_prepare_buff utility routine to initialize per-descriptor xdp_buff fields (e.g. xdp_buff pointers). Rely on xdp_prepare_buff() in all XDP capable drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/bpf/45f46f12295972a97da8ca01990b3e71501e9d89.1608670965.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-01-08net, xdp: Introduce xdp_init_buff utility routineLorenzo Bianconi1-2/+2
Introduce xdp_init_buff utility routine to initialize xdp_buff fields const over NAPI iterations (e.g. frame_sz or rxq pointer). Rely on xdp_init_buff in all XDP capable drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/bpf/7f8329b6da1434dc2b05a77f2e800b29628a8913.1608670965.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-12-01xsk: Propagate napi_id to XDP socket Rx pathBjörn Töpel1-1/+1
Add napi_id to the xdp_rxq_info structure, and make sure the XDP socket pick up the napi_id in the Rx path. The napi_id is used to find the corresponding NAPI structure for socket busy polling. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/bpf/20201130185205.196029-7-bjorn.topel@gmail.com
2020-11-02drivers: net: xen-netfront: Fixed W=1 set but unused warningsAndrew Lunn1-2/+1
drivers/net/xen-netfront.c:2416:16: warning: variable ‘target’ set but not used [-Wunused-but-set-variable] 2416 | unsigned long target; Remove target and just discard the return value from simple_strtoul(). This patch does give a checkpatch warning, but the warning was there before anyway, as this file has lots of checkpatch warnings. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201031180435.1081127-1-andrew@lunn.ch Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-25bpf, xdp: Remove XDP_QUERY_PROG and XDP_QUERY_PROG_HW XDP commandsAndrii Nakryiko1-21/+0
Now that BPF program/link management is centralized in generic net_device code, kernel code never queries program id from drivers, so XDP_QUERY_PROG/XDP_QUERY_PROG_HW commands are unnecessary. This patch removes all the implementations of those commands in kernel, along the xdp_attachment_query(). This patch was compile-tested on allyesconfig. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200722064603.3350758-10-andriin@fb.com
2020-07-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-22/+42
The UDP reuseport conflict was a little bit tricky. The net-next code, via bpf-next, extracted the reuseport handling into a helper so that the BPF sk lookup code could invoke it. At the same time, the logic for reuseport handling of unconnected sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace which changed the logic to carry on the reuseport result into the rest of the lookup loop if we do not return immediately. This requires moving the reuseport_has_conns() logic into the callers. While we are here, get rid of inline directives as they do not belong in foo.c files. The other changes were cases of more straightforward overlapping modifications. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-24xen-netfront: fix potential deadlock in xennet_remove()Andrea Righi1-22/+42
There's a potential race in xennet_remove(); this is what the driver is doing upon unregistering a network device: 1. state = read bus state 2. if state is not "Closed": 3. request to set state to "Closing" 4. wait for state to be set to "Closing" 5. request to set state to "Closed" 6. wait for state to be set to "Closed" If the state changes to "Closed" immediately after step 1 we are stuck forever in step 4, because the state will never go back from "Closed" to "Closing". Make sure to check also for state == "Closed" in step 4 to prevent the deadlock. Also add a 5 sec timeout any time we wait for the bus state to change, to avoid getting stuck forever in wait_event(). Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-03net/xen-netfront: add kernel TX timestampsDaniel Drown1-0/+4
This adds kernel TX timestamps to the xen-netfront driver. Tested with chrony on an AWS EC2 instance. Signed-off-by: Daniel Drown <dan-netdev@drown.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02xen-netfront: remove redundant assignment to variable 'act'Colin Ian King1-1/+1
The variable act is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-01xen networking: add basic XDP support for xen-netfrontDenis Kirjanov1-10/+326
The patch adds a basic XDP processing to xen-netfront driver. We ran an XDP program for an RX response received from netback driver. Also we request xen-netback to adjust data offset for bpf_xdp_adjust_head() header space for custom headers. synchronization between frontend and backend parts is done by using xenbus state switching: Reconfiguring -> Reconfigured- > Connected UDP packets drop rate using xdp program is around 310 kpps using ./pktgen_sample04_many_flows.sh and 160 kpps without the patch. Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01xen-netfront: do not use ~0U as error return value for xennet_fill_frags()Dongli Zhang1-8/+9
xennet_fill_frags() uses ~0U as return value when the sk_buff is not able to cache extra fragments. This is incorrect because the return type of xennet_fill_frags() is RING_IDX and 0xffffffff is an expected value for ring buffer index. In the situation when the rsp_cons is approaching 0xffffffff, the return value of xennet_fill_frags() may become 0xffffffff which xennet_poll() (the caller) would regard as error. As a result, queue->rx.rsp_cons is set incorrectly because it is updated only when there is error. If there is no error, xennet_poll() would be responsible to update queue->rx.rsp_cons. Finally, queue->rx.rsp_cons would point to the rx ring buffer entries whose queue->rx_skbs[i] and queue->grant_rx_ref[i] are already cleared to NULL. This leads to NULL pointer access in the next iteration to process rx ring buffer entries. The symptom is similar to the one fixed in commit 00b368502d18 ("xen-netfront: do not assume sk_buff_head list is empty in error handling"). This patch changes the return type of xennet_fill_frags() to indicate whether it is successful or failed. The queue->rx.rsp_cons will be always updated inside this function. Fixes: ad4f15dc2c70 ("xen/netfront: don't bug in case of too many frags") Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-17Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+1
Pull in bug fixes from 'net' tree for the merge window. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16xen-netfront: do not assume sk_buff_head list is empty in error handlingDongli Zhang1-1/+1
When skb_shinfo(skb) is not able to cache extra fragment (that is, skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS), xennet_fill_frags() assumes the sk_buff_head list is already empty. As a result, cons is increased only by 1 and returns to error handling path in xennet_poll(). However, if the sk_buff_head list is not empty, queue->rx.rsp_cons may be set incorrectly. That is, queue->rx.rsp_cons would point to the rx ring buffer entries whose queue->rx_skbs[i] and queue->grant_rx_ref[i] are already cleared to NULL. This leads to NULL pointer access in the next iteration to process rx ring buffer entries. Below is how xennet_poll() does error handling. All remaining entries in tmpq are accounted to queue->rx.rsp_cons without assuming how many outstanding skbs are remained in the list. 985 static int xennet_poll(struct napi_struct *napi, int budget) ... ... 1032 if (unlikely(xennet_set_skb_gso(skb, gso))) { 1033 __skb_queue_head(&tmpq, skb); 1034 queue->rx.rsp_cons += skb_queue_len(&tmpq); 1035 goto err; 1036 } It is better to always have the error handling in the same way. Fixes: ad4f15dc2c70 ("xen/netfront: don't bug in case of too many frags") Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30net: Use skb_frag_off accessorsJonathan Lemon1-4/+4
Use accessor functions for skb fragment's page_offset instead of direct references, in preparation for bvec conversion. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-16xen-netfront: mark expected switch fall-throughGustavo A. R. Silva1-1/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/net/xen-netfront.c: In function ‘netback_changed’: drivers/net/xen-netfront.c:2038:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (dev->state == XenbusStateClosed) ^ drivers/net/xen-netfront.c:2041:2: note: here case XenbusStateClosing: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-20net: remove 'fallback' argument from dev->ndo_select_queue()Paolo Abeni1-2/+1
After the previous patch, all the callers of ndo_select_queue() provide as a 'fallback' argument netdev_pick_tx. The only exceptions are nested calls to ndo_select_queue(), which pass down the 'fallback' available in the current scope - still netdev_pick_tx. We can drop such argument and replace fallback() invocation with netdev_pick_tx(). This avoids an indirect call per xmit packet in some scenarios (TCP syn, UDP unconnected, XDP generic, pktgen) with device drivers implementing such ndo. It also clean the code a bit. Tested with ixgbe and CONFIG_FCOE=m With pktgen using queue xmit: threads vanilla patched (kpps) (kpps) 1 2334 2428 2 4166 4278 4 7895 8100 v1 -> v2: - rebased after helper's name change Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Lots of conflicts, by happily all cases of overlapping changes, parallel adds, things of that nature. Thanks to Stephen Rothwell, Saeed Mahameed, and others for their guidance in these resolutions. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18xen/netfront: tolerate frags with no dataJuergen Gross1-1/+1
At least old Xen net backends seem to send frags with no real data sometimes. In case such a fragment happens to occur with the frag limit already reached the frontend will BUG currently even if this situation is easily recoverable. Modify the BUG_ON() condition accordingly. Tested-by: Dietmar Hahn <dietmar.hahn@ts.fujitsu.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09xen/netfront: remove unnecessary wmbJacob Wen1-2/+0
RING_PUSH_REQUESTS_AND_CHECK_NOTIFY is already able to make sure backend sees requests before req_prod is updated. Signed-off-by: Jacob Wen <jian.w.wen@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-13xen/netfront: don't bug in case of too many fragsJuergen Gross1-1/+7
Commit 57f230ab04d291 ("xen/netfront: raise max number of slots in xennet_get_responses()") raised the max number of allowed slots by one. This seems to be problematic in some configurations with netback using a larger MAX_SKB_FRAGS value (e.g. old Linux kernel with MAX_SKB_FRAGS defined as 18 instead of nowadays 17). Instead of BUG_ON() in this case just fall back to retransmission. Fixes: 57f230ab04d291 ("xen/netfront: raise max number of slots in xennet_get_responses()") Cc: stable@vger.kernel.org Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-07xen/netfront: fix waiting for xenbus state changeJuergen Gross1-14/+10
Commit 822fb18a82aba ("xen-netfront: wait xenbus state change when load module manually") added a new wait queue to wait on for a state change when the module is loaded manually. Unfortunately there is no wakeup anywhere to stop that waiting. Instead of introducing a new wait queue rename the existing module_unload_q to module_wq and use it for both purposes (loading and unloading). As any state change of the backend might be intended to stop waiting do the wake_up_all() in any case when netback_changed() is called. Fixes: 822fb18a82aba ("xen-netfront: wait xenbus state change when load module manually") Cc: <stable@vger.kernel.org> #4.18 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-14xen-netfront: fix warn message as irq device name has '/'Xiao Liang1-2/+4
There is a call trace generated after commit 2d408c0d4574b01b9ed45e02516888bf925e11a9( xen-netfront: fix queue name setting). There is no 'device/vif/xx-q0-tx' file found under /proc/irq/xx/. This patch only picks up device type and id as its name. With the patch, now /proc/interrupts looks like below and the warning message gone: 70: 21 0 0 0 xen-dyn -event vif0-q0-tx 71: 15 0 0 0 xen-dyn -event vif0-q0-rx 72: 14 0 0 0 xen-dyn -event vif0-q1-tx 73: 33 0 0 0 xen-dyn -event vif0-q1-rx 74: 12 0 0 0 xen-dyn -event vif0-q2-tx 75: 24 0 0 0 xen-dyn -event vif0-q2-rx 76: 19 0 0 0 xen-dyn -event vif0-q3-tx 77: 21 0 0 0 xen-dyn -event vif0-q3-rx Below is call trace information without this patch: name 'device/vif/0-q0-tx' WARNING: CPU: 2 PID: 37 at fs/proc/generic.c:174 __xlate_proc_name+0x85/0xa0 RIP: 0010:__xlate_proc_name+0x85/0xa0 RSP: 0018:ffffb85c40473c18 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000006 RCX: 0000000000000006 RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff984c7f516930 RBP: ffffb85c40473cb8 R08: 000000000000002c R09: 0000000000000229 R10: 0000000000000000 R11: 0000000000000001 R12: ffffb85c40473c98 R13: ffffb85c40473cb8 R14: ffffb85c40473c50 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff984c7f500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f69b6899038 CR3: 000000001c20a006 CR4: 00000000001606e0 Call Trace: __proc_create+0x45/0x230 ? snprintf+0x49/0x60 proc_mkdir_data+0x35/0x90 register_handler_proc+0xef/0x110 ? proc_register+0xfc/0x110 ? proc_create_data+0x70/0xb0 __setup_irq+0x39b/0x660 ? request_threaded_irq+0xad/0x160 request_threaded_irq+0xf5/0x160 ? xennet_tx_buf_gc+0x1d0/0x1d0 [xen_netfront] bind_evtchn_to_irqhandler+0x3d/0x70 ? xenbus_alloc_evtchn+0x41/0xa0 netback_changed+0xa46/0xcda [xen_netfront] ? find_watch+0x40/0x40 xenwatch_thread+0xc5/0x160 ? finish_wait+0x80/0x80 kthread+0x112/0x130 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x35/0x40 Code: 81 5c 00 48 85 c0 75 cc 5b 49 89 2e 31 c0 5d 4d 89 3c 24 41 5c 41 5d 41 5e 41 5f c3 4c 89 ee 48 c7 c7 40 4f 0e b4 e8 65 ea d8 ff <0f> 0b b8 fe ff ff ff 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 0f 1f ---[ end trace 650e5561b0caab3a ]--- Signed-off-by: Xiao Liang <xiliang@redhat.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+4
2018-08-11xen/netfront: don't cache skb_shinfo()Juergen Gross1-4/+4
skb_shinfo() can change when calling __pskb_pull_tail(): Don't cache its return value. Cc: stable@vger.kernel.org Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+6
The BTF conflicts were simple overlapping changes. The virtio_net conflict was an overlap of a fix of statistics counter, happening alongisde a move over to a bonafide statistics structure rather than counting value on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30xen-netfront: wait xenbus state change when load module manuallyXiao Liang1-0/+6
When loading module manually, after call xenbus_switch_state to initializes the state of the netfront device, the driver state did not change so fast that may lead no dev created in latest kernel. This patch adds wait to make sure xenbus knows the driver is not in closed/unknown state. Current state: [vm]# ethtool eth0 Settings for eth0: Link detected: yes [vm]# modprobe -r xen_netfront [vm]# modprobe xen_netfront [vm]# ethtool eth0 Settings for eth0: Cannot get device settings: No such device Cannot get wake-on-lan settings: No such device Cannot get message level: No such device Cannot get link status: No such device No data available With the patch installed. [vm]# ethtool eth0 Settings for eth0: Link detected: yes [vm]# modprobe -r xen_netfront [vm]# modprobe xen_netfront [vm]# ethtool eth0 Settings for eth0: Link detected: yes Signed-off-by: Xiao Liang <xiliang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-22xen-netfront: fix queue name settingVitaly Kuznetsov1-1/+1
Commit f599c64fdf7d ("xen-netfront: Fix race between device setup and open") changed the initialization order: xennet_create_queues() now happens before we do register_netdev() so using netdev->name in xennet_init_queue() is incorrect, we end up with the following in /proc/interrupts: 60: 139 0 xen-dyn -event eth%d-q0-tx 61: 265 0 xen-dyn -event eth%d-q0-rx 62: 234 0 xen-dyn -event eth%d-q1-tx 63: 1 0 xen-dyn -event eth%d-q1-rx and this looks ugly. Actually, using early netdev name (even when it's already set) is also not ideal: nowadays we tend to rename eth devices and queue name may end up not corresponding to the netdev name. Use nodename from xenbus device for queue naming: this can't change in VM's lifetime. Now /proc/interrupts looks like 62: 202 0 xen-dyn -event device/vif/0-q0-tx 63: 317 0 xen-dyn -event device/vif/0-q0-rx 64: 262 0 xen-dyn -event device/vif/0-q1-tx 65: 17 0 xen-dyn -event device/vif/0-q1-rx Fixes: f599c64fdf7d ("xen-netfront: Fix race between device setup and open") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-09net: allow ndo_select_queue to pass netdevAlexander Duyck1-1/+2
This patch makes it so that instead of passing a void pointer as the accel_priv we instead pass a net_device pointer as sb_dev. Making this change allows us to pass the subordinate device through to the fallback function eventually so that we can keep the actual code in the ndo_select_queue call as focused on possible on the exception cases. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-22xen-netfront: Update features after registering netdevRoss Lagerwall1-4/+4
Update the features after calling register_netdev() otherwise the device features are not set up correctly and it not possible to change the MTU of the device. After this change, the features reported by ethtool match the device's features before the commit which introduced the issue and it is possible to change the device's MTU. Fixes: f599c64fdf7d ("xen-netfront: Fix race between device setup and open") Reported-by: Liam Shepherd <liam@dancer.es> Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-22xen-netfront: Fix mismatched rtnl_unlockRoss Lagerwall1-1/+2
Fixes: f599c64fdf7d ("xen-netfront: Fix race between device setup and open") Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-12xen/netfront: raise max number of slots in xennet_get_responses()Juergen Gross1-2/+2
The max number of slots used in xennet_get_responses() is set to MAX_SKB_FRAGS + (rx->status <= RX_COPY_THRESHOLD). In old kernel-xen MAX_SKB_FRAGS was 18, while nowadays it is 17. This difference is resulting in frequent messages "too many slots" and a reduced network throughput for some workloads (factor 10 below that of a kernel-xen based guest). Replacing MAX_SKB_FRAGS by XEN_NETIF_NR_SLOTS_MIN for calculation of the max number of slots to use solves that problem (tests showed no more messages "too many slots" and throughput was as high as with the kernel-xen based guest system). Replace MAX_SKB_FRAGS-2 by XEN_NETIF_NR_SLOTS_MIN-1 in netfront_tx_slot_available() for making it clearer what is really being tested without actually modifying the tested value. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14xen-netfront: fix xennet_start_xmit()'s return typeLuc Van Oostenryck1-1/+1
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-03-26drivers/net: Use octal not symbolic permissionsJoe Perches1-3/+3
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28xen-netfront: Fix hang on device removalJason Andryuk1-1/+6
A toolstack may delete the vif frontend and backend xenstore entries while xen-netfront is in the removal code path. In that case, the checks for xenbus_read_driver_state would return XenbusStateUnknown, and xennet_remove would hang indefinitely. This hang prevents system shutdown. xennet_remove must be able to handle XenbusStateUnknown, and netback_changed must also wake up the wake_queue for that state as well. Fixes: 5b5971df3bc2 ("xen-netfront: remove warning when unloading module") Signed-off-by: Jason Andryuk <jandryuk@gmail.com> Cc: Eduardo Otubo <otubo@redhat.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-02-06xen-netfront: Fix race between device setup and openRoss Lagerwall1-22/+24
When a netfront device is set up it registers a netdev fairly early on, before it has set up the queues and is actually usable. A userspace tool like NetworkManager will immediately try to open it and access its state as soon as it appears. The bug can be reproduced by hotplugging VIFs until the VM runs out of grant refs. It registers the netdev but fails to set up any queues (since there are no more grant refs). In the meantime, NetworkManager opens the device and the kernel crashes trying to access the queues (of which there are none). Fix this in two ways: * For initial setup, register the netdev much later, after the queues are setup. This avoids the race entirely. * During a suspend/resume cycle, the frontend reconnects to the backend and the queues are recreated. It is possible (though highly unlikely) to race with something opening the device and accessing the queues after they have been destroyed but before they have been recreated. Extend the region covered by the rtnl semaphore to protect against this race. There is a possibility that we fail to recreate the queues so check for this in the open function. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-01-08xen-netfront: enable device after manual module loadEduardo Otubo1-0/+1
When loading the module after unloading it, the network interface would not be enabled and thus wouldn't have a backend counterpart and unable to be used by the guest. The guest would face errors like: [root@guest ~]# ethtool -i eth0 Cannot get driver information: No such device [root@guest ~]# ifconfig eth0 eth0: error fetching interface information: Device not found This patch initializes the state of the netfront device whenever it is loaded manually, this state would communicate the netback to create its device and establish the connection between them. Signed-off-by: Eduardo Otubo <otubo@redhat.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-0/+18
Pull networking fixes from David Miller: 1) The forcedeth conversion from pci_*() DMA interfaces to dma_*() ones missed one spot. From Zhu Yanjun. 2) Missing CRYPTO_SHA256 Kconfig dep in cfg80211, from Johannes Berg. 3) Fix checksum offloading in thunderx driver, from Sunil Goutham. 4) Add SPDX to vm_sockets_diag.h, from Stephen Hemminger. 5) Fix use after free of packet headers in TIPC, from Jon Maloy. 6) "sizeof(ptr)" vs "sizeof(*ptr)" bug in i40e, from Gustavo A R Silva. 7) Tunneling fixes in mlxsw driver, from Petr Machata. 8) Fix crash in fanout_demux_rollover() of AF_PACKET, from Mike Maloney. 9) Fix race in AF_PACKET bind() vs. NETDEV_UP notifier, from Eric Dumazet. 10) Fix regression in sch_sfq.c due to one of the timer_setup() conversions. From Paolo Abeni. 11) SCTP does list_for_each_entry() using wrong struct member, fix from Xin Long. 12) Don't use big endian netlink attribute read for IFLA_BOND_AD_ACTOR_SYSTEM, it is in cpu endianness. Also from Xin Long. 13) Fix mis-initialization of q->link.clock in CBQ scheduler, preventing adding filters there. From Jiri Pirko. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits) ethernet: dwmac-stm32: Fix copyright net: via: via-rhine: use %p to format void * address instead of %x net: ethernet: xilinx: Mark XILINX_LL_TEMAC broken on 64-bit myri10ge: Update MAINTAINERS net: sched: cbq: create block for q->link.block atm: suni: remove extraneous space to fix indentation atm: lanai: use %p to format kernel addresses instead of %x VSOCK: Don't set sk_state to TCP_CLOSE before testing it atm: fore200e: use %pK to format kernel addresses instead of %x ambassador: fix incorrect indentation of assignment statement vxlan: use __be32 type for the param vni in __vxlan_fdb_delete bonding: use nla_get_u64 to extract the value for IFLA_BOND_AD_ACTOR_SYSTEM sctp: use right member as the param of list_for_each_entry sch_sfq: fix null pointer dereference at timer expiration cls_bpf: don't decrement net's refcount when offload fails net/packet: fix a race in packet_bind() and packet_notifier() packet: fix crash in fanout_demux_rollover() sctp: remove extern from stream sched sctp: force the params with right types for sctp csum apis sctp: force SCTP_ERROR_INV_STRM with __u32 when calling sctp_chunk_fail ...
2017-11-27xen-netfront: remove warning when unloading moduleEduardo Otubo1-0/+18
v2: * Replace busy wait with wait_event()/wake_up_all() * Cannot garantee that at the time xennet_remove is called, the xen_netback state will not be XenbusStateClosed, so added a condition for that * There's a small chance for the xen_netback state is XenbusStateUnknown by the time the xen_netfront switches to Closed, so added a condition for that. When unloading module xen_netfront from guest, dmesg would output warning messages like below: [ 105.236836] xen:grant_table: WARNING: g.e. 0x903 still in use! [ 105.236839] deferring g.e. 0x903 (pfn 0x35805) This problem relies on netfront and netback being out of sync. By the time netfront revokes the g.e.'s netback didn't have enough time to free all of them, hence displaying the warnings on dmesg. The trick here is to make netfront to wait until netback frees all the g.e.'s and only then continue to cleanup for the module removal, and this is done by manipulating both device states. Signed-off-by: Eduardo Otubo <otubo@redhat.com> Acked-by: Juergen Gross <jgross@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook1-4/+3
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-10-16xen-netfront, xen-netback: Use correct minimum MTU valuesMohammed Gamal1-1/+1
RFC791 specifies the minimum MTU to be 68, while xen-net{front|back} drivers use a minimum value of 0. When set MTU to 0~67 with xen_net{front|back} driver, the network will become unreachable immediately, the guest can no longer be pinged. xen_net{front|back} should not allow the user to set this value which causes network problems. Reported-by: Chen Shi <cheshi@redhat.com> Signed-off-by: Mohammed Gamal <mgamal@redhat.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-08-30xen-netfront: be more drop monitor friendlyEric Dumazet1-1/+1
xennet_start_xmit() might copy skb with inappropriate layout into a fresh one. Old skb is freed, and at this point it is not a drop, but a consume. New skb will then be either consumed or dropped. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-11xen-netfront: avoid crashing on resume after a failure in talk_to_netback()Vitaly Kuznetsov1-2/+1
Unavoidable crashes in netfront_resume() and netback_changed() after a previous fail in talk_to_netback() (e.g. when we fail to read MAC from xenstore) were discovered. The failure path in talk_to_netback() does unregister/free for netdev but we don't reset drvdata and we try accessing it after resume. Fix the bug by removing the whole xen device completely with device_unregister(), this guarantees we won't have any calls into netfront after a failure. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-5/+3
Pull networking updates from David Miller: "Highlights: 1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini Varadhan. 2) Simplify classifier state on sk_buff in order to shrink it a bit. From Willem de Bruijn. 3) Introduce SIPHASH and it's usage for secure sequence numbers and syncookies. From Jason A. Donenfeld. 4) Reduce CPU usage for ICMP replies we are going to limit or suppress, from Jesper Dangaard Brouer. 5) Introduce Shared Memory Communications socket layer, from Ursula Braun. 6) Add RACK loss detection and allow it to actually trigger fast recovery instead of just assisting after other algorithms have triggered it. From Yuchung Cheng. 7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot. 8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert. 9) Export MPLS packet stats via netlink, from Robert Shearman. 10) Significantly improve inet port bind conflict handling, especially when an application is restarted and changes it's setting of reuseport. From Josef Bacik. 11) Implement TX batching in vhost_net, from Jason Wang. 12) Extend the dummy device so that VF (virtual function) features, such as configuration, can be more easily tested. From Phil Sutter. 13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric Dumazet. 14) Add new bpf MAP, implementing a longest prefix match trie. From Daniel Mack. 15) Packet sample offloading support in mlxsw driver, from Yotam Gigi. 16) Add new aquantia driver, from David VomLehn. 17) Add bpf tracepoints, from Daniel Borkmann. 18) Add support for port mirroring to b53 and bcm_sf2 drivers, from Florian Fainelli. 19) Remove custom busy polling in many drivers, it is done in the core networking since 4.5 times. From Eric Dumazet. 20) Support XDP adjust_head in virtio_net, from John Fastabend. 21) Fix several major holes in neighbour entry confirmation, from Julian Anastasov. 22) Add XDP support to bnxt_en driver, from Michael Chan. 23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan. 24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi. 25) Support GRO in IPSEC protocols, from Steffen Klassert" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits) Revert "ath10k: Search SMBIOS for OEM board file extension" net: socket: fix recvmmsg not returning error from sock_error bnxt_en: use eth_hw_addr_random() bpf: fix unlocking of jited image when module ronx not set arch: add ARCH_HAS_SET_MEMORY config net: napi_watchdog() can use napi_schedule_irqoff() tcp: Revert "tcp: tcp_probe: use spin_lock_bh()" net/hsr: use eth_hw_addr_random() net: mvpp2: enable building on 64-bit platforms net: mvpp2: switch to build_skb() in the RX path net: mvpp2: simplify MVPP2_PRS_RI_* definitions net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT net: mvpp2: remove unused register definitions net: mvpp2: simplify mvpp2_bm_bufs_add() net: mvpp2: drop useless fields in mvpp2_bm_pool and related code net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue' net: mvpp2: release reference to txq_cpu[] entry after unmapping net: mvpp2: handle too large value in mvpp2_rx_time_coal_set() net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set() net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set ...
2017-02-21Merge tag 'for-linus-4.11-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds1-2/+4
Pull xen updates from Juergen Gross: "Xen features and fixes: - a series from Boris Ostrovsky adding support for booting Linux as Xen PVH guest - a series from Juergen Gross streamlining the xenbus driver - a series from Paul Durrant adding support for the new device model hypercall - several small corrections" * tag 'for-linus-4.11-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/privcmd: add IOCTL_PRIVCMD_RESTRICT xen/privcmd: Add IOCTL_PRIVCMD_DM_OP xen/privcmd: return -ENOTTY for unimplemented IOCTLs xen: optimize xenbus driver for multiple concurrent xenstore accesses xen: modify xenstore watch event interface xen: clean up xenbus internal headers xenbus: Neaten xenbus_va_dev_error xen/pvh: Use Xen's emergency_restart op for PVH guests xen/pvh: Enable CPU hotplug xen/pvh: PVH guests always have PV devices xen/pvh: Initialize grant table for PVH guests xen/pvh: Make sure we don't use ACPI_IRQ_MODEL_PIC for SCI xen/pvh: Bootstrap PVH guest xen/pvh: Import PVH-related Xen public interfaces xen/x86: Remove PVH support x86/boot/32: Convert the 32-bit pgtable setup code from assembly to C xen/manage: correct return value check on xenbus_scanf() x86/xen: Fix APIC id mismatch warning on Intel xen/netback: set default upper limit of tx/rx queues to 8 xen/netfront: set default upper limit of tx/rx queues to 8
2017-02-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-22/+24
2017-02-10xen-netfront: Delete rx_refill_timer in xennet_disconnect_backend()Boris Ostrovsky1-1/+2
rx_refill_timer should be deleted as soon as we disconnect from the backend since otherwise it is possible for the timer to go off before we get to xennet_destroy_queues(). If this happens we may dereference queue->rx.sring which is set to NULL in xennet_disconnect_backend(). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> CC: stable@vger.kernel.org Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.