aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-03-08net: ethernet: sun: Zero initialize class in default case in niu_add_ethtool_tcam_entryNathan Chancellor1-0/+1
When building with -Wsometimes-uninitialized, Clang warns: drivers/net/ethernet/sun/niu.c:7466:5: warning: variable 'class' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] The default case can never happen because i can only be 0 to 3 (NIU_L3_PROG_CLS is defined as 4). To make this clear to Clang, just zero initialize class in the default case (use the macro CLASS_CODE_UNRECOG to make it clear this shouldn't happen). Link: https://github.com/ClangBuiltLinux/linux/issues/403 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-088139too : Add support for U.S. Robotics USR997901A 10/100 Cardbus NICMatthew Whitehead1-0/+1
Add PCI vendor and device identifier for U.S. Robotics USR997901A 10/100 Cardbus NIC. Tested on real hardware. Signed-off-by: Matthew Whitehead <tedheadster@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-08vxlan: do not need BH again in vxlan_cleanup()Litao Jiao1-2/+2
vxlan_cleanup() is a timer callback, it is already and only running in BH context. Signed-off-by: Litao Jiao <jiaolitao@raisecom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-08net: hns3: add dma_rmb() for rx descriptionJian Shen1-0/+2
HW can not guarantee complete write desc->rx.size, even though HNS3_RXD_VLD_B has been set. Driver needs to add dma_rmb() instruction to make sure desc->rx.size is always valid. Fixes: e55970950556 ("net: hns3: Add handling of GRO Pkts not fully RX'ed in NAPI poll") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-08net: ethernet: stmmac: add management of clk_csr propertyChristophe Roullier1-0/+3
In Documentation stmmac.txt there is possibility to fixed CSR Clock range selection with property clk_csr. This patch add the management of this property For example to use it, add in your ethernet node DT: clk_csr = <3>; Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-08net: ethernet: stmmac: update to support all PHY config for stm32mp157c.Christophe Roullier1-21/+86
Update glue codes to support all PHY config on stm32mp157c PHY_MODE (MII,GMII, RMII, RGMII) and in normal, PHY wo crystal (25Mhz), PHY wo crystal (50Mhz), No 125Mhz from PHY config. Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-08net: ethernet: stmmac: manage Ethernet WoL for stm32mp157c.Christophe Roullier1-1/+29
Add glue codes to support magic packet on stm32mp157c Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-08vxlan: Fix GRO cells race condition between receive and link deleteStefano Brivio1-1/+2
If we receive a packet while deleting a VXLAN device, there's a chance vxlan_rcv() is called at the same time as vxlan_dellink(). This is fine, except that vxlan_dellink() should never ever touch stuff that's still in use, such as the GRO cells list. Otherwise, vxlan_rcv() crashes while queueing packets via gro_cells_receive(). Move the gro_cells_destroy() to vxlan_uninit(), which runs after the RCU grace period is elapsed and nothing needs the gro_cells anymore. This is now done in the same way as commit 8e816df87997 ("geneve: Use GRO cells infrastructure.") originally implemented for GENEVE. Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: 58ce31cca1ff ("vxlan: GRO support at tunnel layer") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-07nfp: fix simple vNIC mailbox lengthDirk van der Merwe1-1/+1
The simple vNIC mailbox length should be 12 decimal and not 0x12. Using a decimal also makes it clear this is a length value and not another field within the simple mailbox defines. Found by code inspection, there are no known firmware configurations where this would cause issues. Fixes: 527d7d1b9949 ("nfp: read mailbox address from TLV caps") Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-07net: stmmac: Avoid sometimes uninitialized Clang warningsNathan Chancellor1-3/+3
When building with -Wsometimes-uninitialized, Clang warns: drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:495:3: warning: variable 'ns' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:495:3: warning: variable 'ns' is used uninitialized whenever '&&' condition is false [-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:532:3: warning: variable 'ns' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:532:3: warning: variable 'ns' is used uninitialized whenever '&&' condition is false [-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:741:3: warning: variable 'sec_inc' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:741:3: warning: variable 'sec_inc' is used uninitialized whenever '&&' condition is false [-Wsometimes-uninitialized] Clang is concerned with the use of stmmac_do_void_callback (which stmmac_get_timestamp and stmmac_config_sub_second_increment wrap), as it may fail to initialize these values if the if condition was ever false (meaning the callbacks don't exist). It's not wrong because the callbacks (get_timestamp and config_sub_second_increment respectively) are the ones that initialize the variables. While it's unlikely that the callbacks are ever going to disappear and make that condition false, we can easily avoid this warning by zero initialize the variables. Link: https://github.com/ClangBuiltLinux/linux/issues/384 Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-07qede: Fix internal loopback failure with jumbo mtu configurationSudarsana Reddy Kalluru1-2/+5
Driver uses port-mtu as packet-size for the loopback traffic. This patch limits the max packet size to 1.5K to avoid data being split over multiple buffer descriptors (BDs) in cases where MTU > PAGE_SIZE. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-07enic: fix build warning without CONFIG_CPUMASK_OFFSTACKArnd Bergmann1-3/+3
The enic driver relies on the CONFIG_CPUMASK_OFFSTACK feature to dynamically allocate a struct member, but this is normally intended for local variables. Building with clang, I get a warning for a few locations that check the address of the cpumask_var_t: drivers/net/ethernet/cisco/enic/enic_main.c:122:22: error: address of array 'enic->msix[i].affinity_mask' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion] As far as I can tell, the code is still correct, as the truth value of the pointer is what we need in this configuration. To get rid of the warning, use cpumask_available() instead of checking the pointer directly. Fixes: 322cf7e3a4e8 ("enic: assign affinity hint to interrupts") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-07peak_usb: fix clang build warningArnd Bergmann1-1/+1
Clang points out undefined behavior when building the pcan_usb_pro driver: drivers/net/can/usb/peak_usb/pcan_usb_pro.c:136:15: error: passing an object that undergoes default argument promotion to 'va_start' has undefined behavior [-Werror,-Wvarargs] Changing the function prototype to avoid argument promotion in the varargs call avoids the warning, and should make this well-defined. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-07ravb: Decrease TxFIFO depth of Q3 and Q2 to oneMasaru Nagai1-1/+1
Hardware has the CBS (Credit Based Shaper) which affects only Q3 and Q2. When updating the CBS settings, even if the driver does so after waiting for Tx DMA finished, there is a possibility that frame data still remains in TxFIFO. To avoid this, decrease TxFIFO depth of Q3 and Q2 to one. This patch has been exercised this using netperf TCP_MAERTS, TCP_STREAM and UDP_STREAM tests run on an Ebisu board. No performance change was detected, outside of noise in the tests, both in terms of throughput and CPU utilisation. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com> Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [simon: updated changelog] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-07davinci_emac: always build in CONFIG_OF codeArnd Bergmann1-3/+1
clang warns about what seems to be an unintended use of an obscure C language feature where a forward declaration of an array remains usable when the final definition is never seen: drivers/net/ethernet/ti/davinci_emac.c:1694:34: error: tentative array definition assumed to have one element [-Werror] static const struct of_device_id davinci_emac_of_match[]; There is no harm in always enabling the device tree matching code here, and it makes the code behave in a more conventional way aside from avoiding the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-06net/mlx5: ODP support for XRC transport is not enabled by default in FWMoni Shoua1-16/+23
ODP support for XRC transport is not enabled by default in FW, so we need separate ODP checks to enable/disable it. While that, rewrite the set of ODP SRQ support capabilities in way that tests each field separately for clearness, which is not needed for current FW, but better to have it separated. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-06net: hns3: Fix a logical vs bitwise typoDan Carpenter1-2/+2
There were a couple logical ORs accidentally mixed in with the bitwise ORs. Fixes: e8149933b1fa ("net: hns3: remove hnae3_get_bit in data path") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-05mm: replace all open encodings for NUMA_NO_NODEAnshuman Khandual1-2/+3
Patch series "Replace all open encodings for NUMA_NO_NODE", v3. All these places for replacement were found by running the following grep patterns on the entire kernel code. Please let me know if this might have missed some instances. This might also have replaced some false positives. I will appreciate suggestions, inputs and review. 1. git grep "nid == -1" 2. git grep "node == -1" 3. git grep "nid = -1" 4. git grep "node = -1" This patch (of 2): At present there are multiple places where invalid node number is encoded as -1. Even though implicitly understood it is always better to have macros in there. Replace these open encodings for an invalid node number with the global macro NUMA_NO_NODE. This helps remove NUMA related assumptions like 'invalid node' from various places redirecting them to a common definition. Link: http://lkml.kernel.org/r/1545127933-10711-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> [ixgbe] Acked-by: Jens Axboe <axboe@kernel.dk> [mtip32xx] Acked-by: Vinod Koul <vkoul@kernel.org> [dmaengine.c] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Doug Ledford <dledford@redhat.com> [drivers/infiniband] Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-04phy: mdio-mux: fix Kconfig dependenciesArnd Bergmann1-1/+1
MDIO_BUS_MUX can only be selected if OF_MDIO is already turned on: WARNING: unmet direct dependencies detected for MDIO_BUS_MUX Depends on [n]: NETDEVICES [=y] && MDIO_BUS [=m] && OF_MDIO [=n] Selected by [m]: - MDIO_BUS_MUX_MULTIPLEXER [=m] && NETDEVICES [=y] && MDIO_BUS [=m] && OF [=y] Fixes: 7865ad6551c9 ("drivers: net: phy: mdio-mux: Add support for Generic Mux controls") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04net: phy: use phy_modify_mmd_changed in genphy_c45_an_config_anegHeiner Kallweit1-9/+8
As can be seen from the usage of the return value, we should use phy_modify_mmd_changed() here. Fixes: 9a5dc8af4416 ("net: phy: add genphy_c45_an_config_aneg") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04net: dsa: mv88e6xxx: add call to mv88e6xxx_ports_cmode_init to probe for new DSA frameworkHeiner Kallweit1-0/+1
In the original patch I missed to add mv88e6xxx_ports_cmode_init() to the second probe function, the one for the new DSA framework. Fixes: ed8fe20205ac ("net: dsa: mv88e6xxx: prevent interrupt storm caused by mv88e6390x_port_set_cmode") Reported-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04sky2: Disable MSI on Dell Inspiron 1545 and Gateway P-79Kai-Heng Feng1-1/+23
Some sky2 chips fire IRQ after S3, before the driver is fully resumed: [ 686.804877] do_IRQ: 1.37 No irq handler for vector This is likely a platform bug that device isn't fully quiesced during S3. Use MSI-X, maskable MSI or INTx can prevent this issue from happening. Since MSI-X and maskable MSI are not supported by this device, fallback to use INTx on affected platforms. BugLink: https://bugs.launchpad.net/bugs/1807259 BugLink: https://bugs.launchpad.net/bugs/1809843 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04net/mlx5e: Update tx reporter status in case channels were successfully openedEran Ben Elisha1-0/+4
Once channels were successfully opened, update tx reporter health state to healthy. This is needed for the following scenario: - SQ has an un-recovered error reported to the devlink health, resulting tx reporter state to be error. - Current channels (including this SQ) are closed - New channels are opened After that flow, the original error was "solved", and tx reporter state should be healthy. However, as it was resolved as a side effect, and not via tx reporter recover method, driver needs to inform devlink health about it. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04team: Free BPF filter when unregistering netdevIdo Schimmel1-0/+15
When team is used in loadbalance mode a BPF filter can be used to provide a hash which will determine the Tx port. When the netdev is later unregistered the filter is not freed which results in memory leaks [1]. Fix by freeing the program and the corresponding filter when unregistering the netdev. [1] unreferenced object 0xffff8881dbc47cc8 (size 16): comm "teamd", pid 3068, jiffies 4294997779 (age 438.247s) hex dump (first 16 bytes): a3 00 6b 6b 6b 6b 6b 6b 88 a5 82 e1 81 88 ff ff ..kkkkkk........ backtrace: [<000000008a3b47e3>] team_nl_cmd_options_set+0x88f/0x11b0 [<00000000c4f4f27e>] genl_family_rcv_msg+0x78f/0x1080 [<00000000610ef838>] genl_rcv_msg+0xca/0x170 [<00000000a281df93>] netlink_rcv_skb+0x132/0x380 [<000000004d9448a2>] genl_rcv+0x29/0x40 [<000000000321b2f4>] netlink_unicast+0x4c0/0x690 [<000000008c25dffb>] netlink_sendmsg+0x929/0xe10 [<00000000068298c5>] sock_sendmsg+0xc8/0x110 [<0000000082a61ff0>] ___sys_sendmsg+0x77a/0x8f0 [<00000000663ae29d>] __sys_sendmsg+0xf7/0x250 [<0000000027c5f11a>] do_syscall_64+0x14d/0x610 [<000000006cfbc8d3>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<00000000e23197e2>] 0xffffffffffffffff unreferenced object 0xffff8881e182a588 (size 2048): comm "teamd", pid 3068, jiffies 4294997780 (age 438.247s) hex dump (first 32 bytes): 20 00 00 00 02 00 00 00 30 00 00 00 28 f0 ff ff .......0...(... 07 00 00 00 00 00 00 00 28 00 00 00 00 00 00 00 ........(....... backtrace: [<000000002daf01fb>] lb_bpf_func_set+0x45c/0x6d0 [<000000008a3b47e3>] team_nl_cmd_options_set+0x88f/0x11b0 [<00000000c4f4f27e>] genl_family_rcv_msg+0x78f/0x1080 [<00000000610ef838>] genl_rcv_msg+0xca/0x170 [<00000000a281df93>] netlink_rcv_skb+0x132/0x380 [<000000004d9448a2>] genl_rcv+0x29/0x40 [<000000000321b2f4>] netlink_unicast+0x4c0/0x690 [<000000008c25dffb>] netlink_sendmsg+0x929/0xe10 [<00000000068298c5>] sock_sendmsg+0xc8/0x110 [<0000000082a61ff0>] ___sys_sendmsg+0x77a/0x8f0 [<00000000663ae29d>] __sys_sendmsg+0xf7/0x250 [<0000000027c5f11a>] do_syscall_64+0x14d/0x610 [<000000006cfbc8d3>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<00000000e23197e2>] 0xffffffffffffffff Fixes: 01d7f30a9f96 ("team: add loadbalance mode") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04net: dsa: mv88e6xxx: support in-band signalling on SGMII ports with external PHYsHeiner Kallweit4-14/+52
If an external PHY is connected via SGMII and uses in-band signalling then the auto-negotiated values aren't propagated to the port, resulting in a broken link. See discussion in [0]. This patch adds this propagation. We need to call mv88e6xxx_port_setup_mac(), therefore export it from chip.c. Successfully tested on a ZII DTU with 88E6390 switch and an Aquantia AQCS109 PHY connected via SGMII to port 9. [0] https://marc.info/?t=155130287200001&r=1&w=2 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04cxgb4/chtls: Prefix adapter flags with CXGB4Arjun Vynipadath11-104/+105
Some of these macros were conflicting with global namespace, hence prefixing them with CXGB4. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04mellanox: Switch to bitmap_zalloc()Andy Shevchenko5-22/+16
Switch to bitmap_zalloc() to show clearly what we are allocating. Besides that it returns pointer of bitmap type instead of opaque void *. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03mlxsw: i2c: Extend initialization by querying resources dataVadim Pasternak2-6/+17
Extend initialization flow by query requests for chip resources data in order to obtain chip's specific capabilities, like the number of ports. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03mlxsw: i2c: Extend input parameters list of command APIVadim Pasternak1-19/+101
Extend input parameters list of command API in mlxsw_i2c_cmd() in order to support initialization commands. Up until now, only access commands were supported by I2C driver. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03mlxsw: i2c: Modify input parameter name in initialization APIVadim Pasternak1-1/+1
Change input parameter name "resource" to "res" in mlxsw_i2c_init() in order to align it with mlxsw_pci_init(). Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03mlxsw: i2c: Fix comment misspellingVadim Pasternak1-1/+1
Fix comment for mlxsw_i2c_write_cmd(). Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03mlxsw: core: Move resource query API to common locationVadim Pasternak3-37/+40
Move mlxsw_pci_resources_query() to a common location to allow reuse by the different drivers and over all the supported physical buses. Rename it to mlxsw_core_resources_query(). Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03mlxsw: minimal: Add ethtool supportVadim Pasternak1-2/+322
The minimal driver is chip independent and uses I2C bus for chip access. Its purpose is to support chassis management on systems equipped with Mellanox switch ASICs. For example from BMC (Board Management Controller) device. Expose a dummy netdev for each front panel port and implement basic ethtool operations to obtain QSFP/SFP module info through ethtool. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03mlxsw: minimal: Make structures and variables names shorterVadim Pasternak1-18/+18
Replace "mlxsw_minimal" by "mlxsw_m" in order to improve code readability. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03mlxsw: core: Move ethtool module callbacks to a common locationVadim Pasternak3-107/+139
Move the implementation of ethtool module callbacks - .get_module_info() and .get_module_eeprom() - to a common location to allow reuse by the different mlxsw drivers. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03net: phy: remove gen10g_no_soft_resetHeiner Kallweit4-12/+5
genphy_no_soft_reset and gen10g_no_soft_reset are both the same no-ops, one is enough. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03net: phy: don't export gen10g_read_statusHeiner Kallweit1-2/+1
gen10g_read_status is deprecated, therefore stop exporting it. We don't want to encourage anybody to use it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03net: phy: remove gen10g_config_initHeiner Kallweit3-16/+0
ETHTOOL_LINK_MODE_10000baseT_Full_BIT is set anyway in the supported and advertising bitmap because it's part of PHY_10GBIT_FEATURES. And all users of gen10g_config_init use PHY_10GBIT_FEATURES. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03net: phy: remove gen10g_suspend and gen10g_resumeHeiner Kallweit1-14/+0
phy_suspend() and phy_resume() are no-ops anyway if no callback is defined. Therefore we don't need these stubs. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03net: phy: use genphy_c45_aneg_done in genphy_aneg_doneHeiner Kallweit1-8/+4
Now that we have it let's use genphy_c45_aneg_done() in phy_aneg_done(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03qmi_wwan: Add support for Quectel EG12/EM12Kristian Evensen1-8/+18
Quectel EG12 (module)/EM12 (M.2 card) is a Cat. 12 LTE modem. The modem behaves in the same way as the EP06, so the "set DTR"-quirk must be applied and the diagnostic-interface check performed. Since the diagnostic-check now applies to more modems, I have renamed the function from quectel_ep06_diag_detected() to quectel_diag_detected(). Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03net: dsa: mv8e6xxx: fix number of internal PHYs for 88E6x90 familyHeiner Kallweit1-6/+6
Ports 9 and 10 don't have internal PHY's but are (dependent on the version) SERDES/SGMII/XAUI/RXAUI ports. v2: - fix it for all 88E6x90 family members Fixes: bc3931557d1d ("net: dsa: mv88e6xxx: Add number of internal PHYs") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03fsl/fman: Use vsprintf extension %pMJoe Perches1-3/+1
Make logging of an ethernet address more consistent with the rest of the kernel. Miscellanea: The %02hx use also did not quite match the u8 definition of addr though that did not actually matter given normal integer promotion rules. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03net: dsa: mv88e6xxx: handle unknown duplex modes gracefully in mv88e6xxx_port_set_duplexHeiner Kallweit1-1/+1
When testing another issue I faced the problem that mv88e6xxx_port_setup_mac() failed due to DUPLEX_UNKNOWN being passed as argument to mv88e6xxx_port_set_duplex(). We should handle this case gracefully and return -EOPNOTSUPP, like e.g. mv88e6xxx_port_set_speed() is doing it. Fixes: 7f1ae07b51e8 ("net: dsa: mv88e6xxx: add port duplex setter") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03dpaa2-eth: add XDP_REDIRECT supportIoana Radulescu3-14/+176
Implement support for the XDP_REDIRECT action. The redirected frame is transmitted and confirmed on the regular Tx/Tx conf queues. Frame is marked with the "XDP" type in the software annotation, since it requires special treatment. We don't have good hardware support for TX batching, so the XDP_XMIT_FLUSH flag doesn't make a difference for now; ndo_xdp_xmit performs the actual Tx operation on the spot. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03dpaa2-eth: Add software annotation typesIoana Radulescu2-22/+40
We write different metadata information in the software annotation area of Tx frames, depending on frame type. Make this more explicit by introducing a type field and separate structures for single buffer and scatter-gather frames. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03net: macb: Add support for suspend/resume with full power downHarini Katakam1-2/+38
When macb device is suspended and system is powered down, the clocks are removed and hence macb should be closed gracefully and restored upon resume. This patch does the same by switching off the net device, suspending phy and performing necessary cleanup of interrupts and BDs. Upon resume, all these are reinitialized again. Reset of macb device is done only when GEM is not a wake device. Even when gem is a wake device, tx queues can be stopped and ptp device can be closed (tsu clock will be disabled in pm_runtime_suspend) as wake event detection has no dependency on this. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03net: macb: Add pm runtime supportHarini Katakam1-36/+112
Add runtime pm functions and move clock handling there. Add runtime PM calls to mdio functions to allow for active mdio bus. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03net: macb: Support clock management for tsu_clkHarini Katakam2-6/+27
TSU clock needs to be enabled/disabled as per support in devicetree and it should also be controlled during suspend/resume (WOL has no dependency on this clock). Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03net: macb: Check MDIO state before read/write and use timeoutsHarini Katakam2-6/+29
Replace the while loop in MDIO read/write functions with a timeout. In addition, add a check for MDIO bus busy before initiating a new operation as well to make sure there is no ongoing MDIO operation. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>