aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-10-09net/mlx4_core: Convert timers to use timer_setup()Kees Cook1-6/+4
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Tariq Toukan <tariqt@mellanox.com> Cc: netdev@vger.kernel.org Cc: linux-rdma@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-03net: stmmac: dwmac-rk: Add RK3128 GMAC supportDavid Wu1-0/+112
Add constants and callback functions for the dwmac on rk3128 soc. As can be seen, the base structure is the same, only registers and the bits in them moved slightly. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03rndis_host: support Novatel Verizon USB730LAleksander Morgado2-1/+14
Treat the ef/04/01 interface class/subclass/protocol combination used by the Novatel Verizon USB730L (1410:9030) as a possible RNDIS interface. T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 3 P: Vendor=1410 ProdID=9030 Rev=03.10 S: Manufacturer=Novatel Wireless S: Product=MiFi USB730L S: SerialNumber=0123456789ABCDEF C: #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host I: If#= 2 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid Once the network interface is brought up, the user just needs to run a DHCP client to get IP address and routing setup. As a side note, other Novatel Verizon USB730L models with the same vid:pid end up exposing a standard ECM interface which doesn't require any other kernel update to make it work. Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Reviewed-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02mlxsw: spectrum_router: Track RIF of IPIP next hopsPetr Machata1-2/+11
When considering whether to set RTNH_F_OFFLOAD flag on an IPv6 route, mlxsw_sp_fib6_entry_offload_set() looks up the mlxsw_sp_nexthop corresponding to a given route, and decides based on whether the next hop's offloaded flag was set. When looking for the matching next hop, it also takes into account the device of the route, which must match next hop's RIF. IPIP next hops however hitherto didn't set the RIF. As a result, IPv6 routes forwarding traffic to IP-in-IP netdevices are never marked as offloaded, even when they actually are. Thus track RIF of IPIP next hops the same way as that of ETHERNET next hops. Fixes: 8f28a3097645 ("mlxsw: spectrum_router: Support IPv6 overlay encap") Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02mlxsw: spectrum_router: Move VRF refcountingPetr Machata1-2/+3
When creating a new RIF, bumping RIF count of the containing VR is the last thing to be done. Symmetrically, when destroying a RIF, RIF count is first dropped and only then the rest of the cleanup proceeds. That's a problem for loopback RIFs. Those hold two VR references: one for overlay and one for underlay. mlxsw_sp_rif_destroy() releases the overlay one, and the deconfigure() callback the underlay one. But if both overlay and underlay are the same, and if there are no other artifacts holding the VR alive, this put actually destroys the VR. Later on, when mlxsw_sp_rif_destroy() calls mlxsw_sp_vr_put() for the same VR, the VR will already have been released and the kernel crashes with NULL pointer dereference. The underlying problem is that the RIF under destruction ends up referencing the overlay VR much longer than it claims: all the way until the call to mlxsw_sp_vr_put(). So line up the reference counting properly to reflect this. Make corresponding changes in mlxsw_sp_rif_create() as well for symmetry. Fixes: 6ddb7426a7d4 ("mlxsw: spectrum_router: Introduce loopback RIFs") Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: hns3: Fix an error handling path in 'hclge_rss_init_hw()'Christophe JAILLET1-1/+2
If this sanity check fails, we must free 'rss_indir'. Otherwise there is a memory leak. 'goto err' as done in the other error handling paths to fix it. Fixes: 46a3df9f9718 ("net: hns3: Fix for setting rss_size incorrectly") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: mvpp2: Fix clock resource by adding an optional bus clockGregory CLEMENT1-0/+15
On Armada 7K/8K we need to explicitly enable the bus clock. The bus clock is optional because not all the SoCs need them but at least for Armada 7K/8K it is actually mandatory. The binding documentation is updating accordingly. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01r8152: add Linksys USB3GIGV1 idGrant Grundler2-0/+12
This linksys dongle by default comes up in cdc_ether mode. This patch allows r8152 to claim the device: Bus 002 Device 002: ID 13b1:0041 Linksys Signed-off-by: Grant Grundler <grundler@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01ppp: fix __percpu annotationGuillaume Nault1-1/+1
Move sparse annotation right after pointer type. Fixes sparse warning: drivers/net/ppp/ppp_generic.c:1422:13: warning: incorrect type in initializer (different address spaces) drivers/net/ppp/ppp_generic.c:1422:13: expected void const [noderef] <asn:3>*__vpp_verify drivers/net/ppp/ppp_generic.c:1422:13: got int *<noident> ... Fixes: e5dadc65f9e0 ("ppp: Fix false xmit recursion detect with two ppp devices") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-29Merge tag 'mlx5-fixes-2017-09-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller14-27/+128
Saeed Mahameed says: ==================== mlx5-fixes-2017-09-28 Misc. fixes for mlx5 drivers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: dsa: mv88e6xxx: lock mutex when freeing IRQsVivien Didelot1-0/+2
mv88e6xxx_g2_irq_free locks the registers mutex, but not mv88e6xxx_g1_irq_free, which results in a stack trace from assert_reg_lock when unloading the mv88e6xxx module. Fix this. Fixes: 3460a5770ce9 ("net: dsa: mv88e6xxx: Mask g1 interrupts and free interrupt") Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: stmmac: dwmac4: Re-enable MAC Rx before powering downEd Blake1-0/+7
Re-enable the MAC receiver by setting CONFIG_RE before powering down, as instructed in section 6.3.5.1 of [1]. Without this the MAC fails to receive WoL packets and never wakes up. [1] DWC Ethernet QoS Databook 4.10a October 2014 Signed-off-by: Ed Blake <ed.blake@sondrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: stmmac: dwc-qos: Add suspend / resume supportEd Blake1-0/+1
Add hook to stmmac_pltfr_pm_ops for suspend / resume handling. Signed-off-by: Ed Blake <ed.blake@sondrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: dsa: mv88e6xxx: Allow dsa and cpu ports in multiple vlansAndrew Lunn1-0/+4
Ports with the same VLAN must all be in the same bridge. However the CPU and DSA ports need to be in multiple VLANs spread over multiple bridges. So exclude them when performing this test. Fixes: b2f81d304cee ("net: dsa: add CPU and DSA ports as VLAN members") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: mvpp2: do not select the internal source clockAntoine Tenart1-2/+1
This patch stops the internal MAC Tx clock from being enabled as the internal clock isn't used. The definition used for the bit controlling this behaviour is renamed as well as it was wrongly named (bit 4 of GMAC_CTRL_2_REG). Fixes: 3919357fb0bb ("net: mvpp2: initialize the GMAC when using a port") Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: mvpp2: fix port list indexingYan Markman1-3/+5
The private port_list array has a list of pointers to mvpp2_port instances. This list is allocated given the number of ports enabled in the device tree, but the pointers are set using the port-id property. If on a single port is enabled, the port_list array will be of size 1, but when registering the port, if its id is not 0 the driver will crash. Other crashes were encountered in various situations. This fixes the issue by using an index not equal to the value of the port-id property. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Yan Markman <ymarkman@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: mvpp2: fix parsing fragmentation detectionStefan Chulski1-6/+14
Parsing fragmentation detection failed due to wrong configured parser TCAM entry's. Some traffic was marked as fragmented in RX descriptor, even it wasn't IP fragmented. The hardware also failed to calculate checksums which lead to use software checksum and caused performance degradation. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Stefan Chulski <stefanc@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28tun: bail out from tun_get_user() if the skb is emptyAlexander Potapenko1-3/+5
KMSAN (https://github.com/google/kmsan) reported accessing uninitialized skb->data[0] in the case the skb is empty (i.e. skb->len is 0): ================================================ BUG: KMSAN: use of uninitialized memory in tun_get_user+0x19ba/0x3770 CPU: 0 PID: 3051 Comm: probe Not tainted 4.13.0+ #3140 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: ... __msan_warning_32+0x66/0xb0 mm/kmsan/kmsan_instr.c:477 tun_get_user+0x19ba/0x3770 drivers/net/tun.c:1301 tun_chr_write_iter+0x19f/0x300 drivers/net/tun.c:1365 call_write_iter ./include/linux/fs.h:1743 new_sync_write fs/read_write.c:457 __vfs_write+0x6c3/0x7f0 fs/read_write.c:470 vfs_write+0x3e4/0x770 fs/read_write.c:518 SYSC_write+0x12f/0x2b0 fs/read_write.c:565 SyS_write+0x55/0x80 fs/read_write.c:557 do_syscall_64+0x242/0x330 arch/x86/entry/common.c:284 entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.S:245 ... origin: ... kmsan_poison_shadow+0x6e/0xc0 mm/kmsan/kmsan.c:211 slab_alloc_node mm/slub.c:2732 __kmalloc_node_track_caller+0x351/0x370 mm/slub.c:4351 __kmalloc_reserve net/core/skbuff.c:138 __alloc_skb+0x26a/0x810 net/core/skbuff.c:231 alloc_skb ./include/linux/skbuff.h:903 alloc_skb_with_frags+0x1d7/0xc80 net/core/skbuff.c:4756 sock_alloc_send_pskb+0xabf/0xfe0 net/core/sock.c:2037 tun_alloc_skb drivers/net/tun.c:1144 tun_get_user+0x9a8/0x3770 drivers/net/tun.c:1274 tun_chr_write_iter+0x19f/0x300 drivers/net/tun.c:1365 call_write_iter ./include/linux/fs.h:1743 new_sync_write fs/read_write.c:457 __vfs_write+0x6c3/0x7f0 fs/read_write.c:470 vfs_write+0x3e4/0x770 fs/read_write.c:518 SYSC_write+0x12f/0x2b0 fs/read_write.c:565 SyS_write+0x55/0x80 fs/read_write.c:557 do_syscall_64+0x242/0x330 arch/x86/entry/common.c:284 return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.S:245 ================================================ Make sure tun_get_user() doesn't touch skb->data[0] unless there is actual data. C reproducer below: ========================== // autogenerated by syzkaller (http://github.com/google/syzkaller) #define _GNU_SOURCE #include <fcntl.h> #include <linux/if_tun.h> #include <netinet/ip.h> #include <net/if.h> #include <string.h> #include <sys/ioctl.h> int main() { int sock = socket(PF_INET, SOCK_STREAM, IPPROTO_IP); int tun_fd = open("/dev/net/tun", O_RDWR); struct ifreq req; memset(&req, 0, sizeof(struct ifreq)); strcpy((char*)&req.ifr_name, "gre0"); req.ifr_flags = IFF_UP | IFF_MULTICAST; ioctl(tun_fd, TUNSETIFF, &req); ioctl(sock, SIOCSIFFLAGS, "gre0"); write(tun_fd, "hi", 0); return 0; } ========================== Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net/mlx5: Fix wrong indentation in enable SRIOV codeOr Gerlitz1-1/+1
Smatch is screaming: drivers/net/ethernet/mellanox/mlx5/core/sriov.c:112 mlx5_device_enable_sriov() warn: inconsistent indenting fix that. Fixes: 7ecf6d8ff154 ('IB/mlx5: Restore IB guid/policy for virtual functions') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5: Fix static checker warning on steering tracepoints codeMatan Barak1-2/+2
Fix this sparse complaint: drivers/net/ethernet/mellanox/mlx5/core/./diag/fs_tracepoint.h:172:1: warning: odd constant _Bool cast (ffffffffffffffff becomes 1) Fixes: d9fea79171ee ('net/mlx5: Add tracepoints') Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5e: Fix calculated checksum offloads countersGal Pressman4-6/+13
Instead of calculating the offloads counters, count them explicitly. The calculations done for these counters would result in bugs in some cases, for example: When running TCP traffic over a VXLAN tunnel with TSO enabled the following counters would increase: tx_csum_partial: 1,333,284 tx_csum_partial_inner: 29,286 tx4_csum_partial_inner: 384 tx7_csum_partial_inner: 8 tx9_csum_partial_inner: 34 tx10_csum_partial_inner: 26,807 tx11_csum_partial_inner: 287 tx12_csum_partial_inner: 27 tx16_csum_partial_inner: 6 tx25_csum_partial_inner: 1,733 Seems like tx_csum_partial increased out of nowhere. The issue is in the following calculation in mlx5e_update_sw_counters: s->tx_csum_partial = s->tx_packets - tx_offload_none - s->tx_csum_partial_inner; While tx_packets increases by the number of GSO segments for each SKB, tx_csum_partial_inner will only increase by one, resulting in wrong tx_csum_partial counter. Fixes: bfe6d8d1d433 ("net/mlx5e: Reorganize ethtool statistics") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5e: Don't add/remove 802.1ad rules when changing 802.1Q VLAN filterGal Pressman1-2/+2
Toggling of C-tag VLAN filter should not affect the "any S-tag" steering rule. Fixes: 8a271746a264 ("net/mlx5e: Receive s-tagged packets in promiscuous mode") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5e: Print netdev features correctly in error messageGal Pressman1-2/+2
Use the correct formatting for netdev features. Fixes: 0e405443e803 ("net/mlx5e: Improve set features ndo resiliency") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5e: Check encap entry state when offloading tunneled flowsVlad Buslov1-0/+3
Encap entries cached by the driver could be invalidated due to tunnel destination neighbour state changes. When attempting to offload a flow that uses a cached encap entry, we must check the entry validity and defer the offloading if the entry exists but not valid. When EAGAIN is returned, the flow offloading to hardware takes place by the neigh update code when the tunnel destination neighbour becomes connected. Fixes: 232c001398ae ("net/mlx5e: Add support to neighbour update flow") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5e: Disallow TC offloading of unsupported match/action combinationsOr Gerlitz1-0/+70
When offloading header re-write, the HW may need to adjust checksums along the packet. For IP traffic, and a case where we are asked to modify fields in the IP header, current HW supports that only for TCP and UDP. Enforce it, in this case fail the offloading attempt for non TCP/UDP packets. Fixes: d7e75a325cb2 ('net/mlx5e: Add offloading of E-Switch TC pedit (header re-write) actions') Fixes: 2f4fe4cab073 ('net/mlx5e: Add offloading of NIC TC pedit (header re-write) actions') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5e: Fix erroneous freeing of encap header bufferPaul Blakey1-8/+10
In case the neighbour for the tunnel destination isn't valid, we send a neighbour update request but we free the encap header buffer. This is wrong, because we still need it for allocating a HW encap entry once the neighbour is available. Fix that by skipping freeing it if we wait for neighbour. Fixes: 232c001398ae ('net/mlx5e: Add support to neighbour update flow') Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5: Check device capability for maximum flow countersRaed Salem2-0/+19
Added check for the maximal number of flow counters attached to rule (FTE). Fixes: bd5251dbf156b ('net/mlx5_core: Introduce flow steering destination of type counter') Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5: Fix FPGA capability locationInbar Karmy3-5/+4
Currently, FPGA capability is located in (mdev)->caps.hca_cur, change the location to be (mdev)->caps.fpga, since hca_cur is reserved for HCA device capabilities. Fixes: e29341fb3a5b ("net/mlx5: FPGA, Add basic support for Innova") Signed-off-by: Inbar Karmy <inbark@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5e: IPoIB, Fix access to invalid memory addressRoi Dayan1-1/+2
When cleaning rdma netdevice we need to save the mdev pointer because priv is released when we release netdev. This bug was found using the kernel address sanitizer (KASAN). use-after-free in mlx5_rdma_netdev_free+0xe3/0x100 [mlx5_core] Fixes: 48935bbb7ae8 ("net/mlx5e: IPoIB, Add netdevice profile skeleton") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-26Merge tag 'wireless-drivers-for-davem-2017-09-25' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-driversDavid S. Miller17-46/+125
Kalle Valo says: ==================== wireless-drivers fixes for 4.14 Quite a lot of fixes this time. Most notable is the brcmfmac fix for a CVE issue. iwlwifi * a couple of bugzilla bugs related to multicast handling * two fixes for WoWLAN bugs that were causing queue hangs and re-initialization problems * two fixes for potential uninitialized variable use reported by Dan Carpenter in relation to a recently introduced patch * a fix for buffer reordering in the newly supported 9000 device family * fix a race when starting aggregation * small fix for a recent patch to wake mac80211 queues * send non-bufferable management frames in the generic queue so they are not sent on queues that are under power-save ath10k * fix a PCI PM related gcc warning brcmfmac * CVE-2017-0786: add length check scan results from firmware * respect passive scan requests from user space qtnfmac * fix race in tx path when using multiple interfaces * cancel ongoing scan when removing the wireless interface ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26atlantic: fix iommu errorsPavel Belous3-27/+49
Call skb_frag_dma_map multiple times if tx length is greater than device max and avoid processing tx ring until entire packet has been sent. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26aquantia: Fix transient invalid link down/up indicationsIgor Russkikh1-2/+1
Due to a bug in aquantia atlantic card firmware, it sometimes reports invalid link speed bits. That caused driver to report link down events, although link itself is totally fine. This patch ignores such out of blue readings. Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26aquantia: Fix Tx queue hangupsIgor Russkikh6-59/+76
Driver did a poor job in managing its Tx queues: Sometimes it could stop tx queues due to link down condition in aq_nic_xmit - but never waked up them. That led to Tx path total suspend. This patch fixes this and improves generic queue management: - introduces queue restart counter - uses generic netif_ interface to disable and enable tx path - refactors link up/down condition and introduces dmesg log event when link changes. - introduces new constant for minimum descriptors count required for queue wakeup Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26aquantia: Setup max_mtu in ndev to enable jumbo framesIgor Russkikh2-10/+3
Although hardware is capable for almost 16K MTU, without max_mtu field correctly set it only allows standard MTU to be used. This patch enables max MTU, calculating it from hardware maximum frame size of 16352 octets (including FCS). Fixes: 5513e16421cb ("net: ethernet: aquantia: Fixes for aq_ndev_change_mtu") Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25rocker: fix rocker_tlv_put_* functions for KASANArnd Bergmann1-18/+30
Inlining these functions creates lots of stack variables that each take 64 bytes when KASAN is enabled, leading to this warning about potential stack overflow: drivers/net/ethernet/rocker/rocker_ofdpa.c: In function 'ofdpa_cmd_flow_tbl_add': drivers/net/ethernet/rocker/rocker_ofdpa.c:621:1: error: the frame size of 2752 bytes is larger than 1536 bytes [-Werror=frame-larger-than=] gcc-8 can now consolidate the stack slots itself, but on older versions we get the same behavior by using a temporary variable that holds a copy of the inline function argument. Cc: stable@vger.kernel.org Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25net: qcom/emac: specify the correct size when mapping a DMA bufferTimur Tabi1-1/+2
When mapping the RX DMA buffers, the driver was accidentally specifying zero for the buffer length. Under normal circumstances, SWIOTLB does not need to allocate a bounce buffer, so the address is just mapped without checking the size field. This is why the error was not detected earlier. Fixes: b9b17debc69d ("net: emac: emac gigabit ethernet controller driver") Cc: stable@vger.kernel.org Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25Merge ath-current from ath.gitKalle Valo1-5/+2
ath.git fixes for 4.14. Major changes: ath10k * fix a PCI PM related gcc warning
2017-09-23net: qualcomm: rmnet: Fix rcu splat in rmnet_is_real_dev_registeredSubash Abhinov Kasiviswanathan1-4/+1
Xiaolong reported a suspicious rcu_dereference_check in the device unregister notifier callback. Since we do not dereference the rx_handler_data, it's ok to just check for the value of the pointer. Note that this section is already protected by rtnl_lock. [ 101.364846] WARNING: suspicious RCU usage [ 101.365654] 4.13.0-rc6-01701-gceed73a #1 Not tainted [ 101.370873] ----------------------------- [ 101.372472] drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c:57 suspicious rcu_dereference_check() usage! [ 101.374427] [ 101.374427] other info that might help us debug this: [ 101.374427] [ 101.387491] [ 101.387491] rcu_scheduler_active = 2, debug_locks = 1 [ 101.389368] 1 lock held by trinity-main/2809: [ 101.390736] #0: (rtnl_mutex){+.+.+.}, at: [<8146085b>] rtnl_lock+0xf/0x11 [ 101.395482] [ 101.395482] stack backtrace: [ 101.396948] CPU: 0 PID: 2809 Comm: trinity-main Not tainted 4.13.0-rc6-01701-gceed73a #1 [ 101.398857] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014 [ 101.401079] Call Trace: [ 101.401656] dump_stack+0xa1/0xeb [ 101.402871] lockdep_rcu_suspicious+0xc7/0xd0 [ 101.403665] rmnet_is_real_dev_registered+0x40/0x4e [ 101.405199] rmnet_config_notify_cb+0x2c/0x142 [ 101.406344] ? wireless_nlevent_flush+0x47/0x71 [ 101.407385] notifier_call_chain+0x2d/0x47 [ 101.408645] raw_notifier_call_chain+0xc/0xe [ 101.409882] call_netdevice_notifiers_info+0x41/0x49 [ 101.411402] call_netdevice_notifiers+0xc/0xe [ 101.412713] rollback_registered_many+0x268/0x36e [ 101.413702] rollback_registered+0x39/0x56 [ 101.414965] unregister_netdevice_queue+0x79/0x88 [ 101.415908] unregister_netdev+0x16/0x1d Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Reported-by: kernel test robot <xiaolong.ye@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-23cnic: Fix an error handling path in 'cnic_alloc_bnx2x_resc()'Christophe JAILLET1-1/+1
All the error handling paths 'goto error', except this one. We should also go to error in this case, or some resources will be leaking. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net: phy: Fix truncation of large IRQ numbers in phy_attached_print()Geert Uytterhoeven1-1/+1
Given NR_IRQS is 2048 on sparc64, and even 32784 on alpha, 3 digits is not enough to represent interrupt numbers on all architectures. Hence PHY interrupt numbers may be truncated during printing. Increase the buffer size from 4 to 8 bytes to fix this. Fixes: 5e369aefdce4818c ("net: stmmac: Delete dead code for MDIO registration") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net: stmmac: Cocci spatch "of_table"Thomas Meyer1-0/+1
Make sure (of/i2c/platform)_device_id tables are NULL terminated. Found by coccinelle spatch "misc/of_table.cocci" Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21lan78xx: Use default values loaded from EEPROM/OTP after resetNisar Sayed1-1/+0
Use default value of auto duplex and auto speed values loaded from EEPROM/OTP after reset. The LAN78xx allows platform configurations to be loaded from EEPROM/OTP. Ex: When external phy is connected, the MAC can be configured to have correct auto speed, auto duplex, auto polarity configured from the EEPROM/OTP. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21lan78xx: Allow EEPROM write for less than MAX_EEPROM_SIZENisar Sayed1-5/+4
Allow EEPROM write for less than MAX_EEPROM_SIZE Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21lan78xx: Fix for eeprom read/write when device auto suspendNisar Sayed1-4/+20
Fix for eeprom read/write when device auto suspend Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net: phy: Keep reporting transceiver typeFlorian Fainelli1-1/+2
With commit 2d55173e71b0 ("phy: add generic function to support ksetting support"), we lost the ability to report the transceiver type like we used to. Now that we have added back the transceiver type to ethtool_link_settings, we can report it back like we used to and have no loss of information. Fixes: 3f1ac7a700d0 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API") Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net: qcom/emac: add software control for pause frame modeTimur Tabi4-0/+58
The EMAC has the option of sending only a single pause frame when flow control is enabled and the RX queue is full. Although sending only one pause frame has little value, this would allow admins to enable automatic flow control without having to worry about the EMAC flooding nearby switches with pause frames if the kernel hangs. The option is enabled by using the single-pause-mode private flag. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21hv_netvsc: fix send buffer failure on MTU changeAlex Ng3-5/+12
If MTU is changed the host would reject the send buffer change. This problem is result of recent change to allow changing send buffer size. Every time we change the MTU, we store the previous net_device section count before destroying the buffer, but we don’t store the previous section size. When we reinitialize the buffer, its size is calculated by multiplying the previous count and previous size. Since we continuously increase the MTU, the host returns us a decreasing count value while the section size is reinitialized to 1728 bytes every time. This eventually leads to a condition where the calculated buf_size is so small that the host rejects it. Fixes: 8b5327975ae1 ("netvsc: allow controlling send/recv buffer size") Signed-off-by: Alex Ng <alexng@microsoft.com> Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21ath10k: mark PM functions as __maybe_unusedArnd Bergmann1-5/+2
When CONFIG_PM_SLEEP is disabled, we get a compile-time warning: drivers/net/wireless/ath/ath10k/pci.c:3417:12: error: 'ath10k_pci_pm_resume' defined but not used [-Werror=unused-function] static int ath10k_pci_pm_resume(struct device *dev) ^~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/ath/ath10k/pci.c:3401:12: error: 'ath10k_pci_pm_suspend' defined but not used [-Werror=unused-function] static int ath10k_pci_pm_suspend(struct device *dev) Rather than fixing the #ifdef, this just marks both functions as __maybe_unused, which is a more robust way to do this. Fixes: 32faa3f0ee50 ("ath10k: add the PCI PM core suspend/resume ops") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-09-20net: hns3: Fix for pri to tc mapping in TMYunsheng Lin3-9/+12
Current mapping between pri and tc is one to one, so user can't map multi priorities to the same tc. This patch changes the mapping to many to one. Fixes: 848440544b41f ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: hns3: Fix for setting rss_size incorrectlyYunsheng Lin3-40/+38
rss_size is 1, 2, 4, 8, 16, 32, 64, 128, but acutal tc queue size can be any u16 less than 128. If tc queue size is 5, we set the rss_size to 8, indirection table will be used to limit the size of actual queue size. It may cause dropping of receiving packet in hardware if rss_size is not set correctly. For now, each TC has the same rss size. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.