aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-07-05net: introduce default neigh_construct/destroy ndo calls for L2 upper devicesJiri Pirko2-0/+4
L2 upper device needs to propagate neigh_construct/destroy calls down to lower devices. Do this by defining default ndo functions and use them in team, bond, bridge and vlan. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: add dev arg to ndo_neigh_construct/destroyJiri Pirko1-1/+2
As the following patch will allow upper devices to follow the call down lower devices, we need to add dev here and not rely on n->dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: r6040: Bump version and dateFlorian Fainelli1-2/+2
Bump version to 0.28 and date to 4th of July 2016. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: r6040: Update my emailFlorian Fainelli1-2/+2
Update my email address in the driver and MAINTAINERS file. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: r6040: Utilize napi_complete_done()Florian Fainelli1-1/+1
We maintain how much work we did in NAPI context, so provide that with napi_complete_done(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: r6040: Utilize __napi_schedule_irqoffFlorian Fainelli1-1/+1
We are already in hard IRQ context, so we can use __napi_schedule_irqoff() to save a few operations. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: r6040: Check for skb->xmit_moreFlorian Fainelli1-1/+2
Kick the transmission only if this is the last SKB to transmit or the queue is not already stopped. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: r6040: Reclaim transmitted buffers in NAPIFlorian Fainelli1-9/+8
Instead of taking one interrupt per packet transmitted, re-use the same NAPI context to free transmitted buffers. Since we are no longer in hard IRQ context replace dev_kfree_skb_irq() by dev_kfree_skb(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: r6040: Utilize skb_put_padto()Florian Fainelli1-5/+4
Pad the SKB to the minimum length of ETH_ZLEN by using skb_put_padto() and take this operation out of the critical section since there is no need to check any HW resources before doing that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: r6040: Increase statistics upon transmit completionFlorian Fainelli1-3/+5
r6040_xmit() is increasing transmit statistics during transmission while this may still fail, do this in r6040_tx() where we complete transmitted buffers instead. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: r6040: Utilize phy_print_statusFlorian Fainelli1-8/+2
Instead of open coding our own version utilize the library provided function. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05dwc_eth_qos: remove unused including <linux/version.h>Wei Yongjun1-1/+0
Remove including <linux/version.h> that don't need it. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net/mlx5e: Expose flow control counters to ethtoolGal Pressman2-8/+38
Just like per prio counters, the global flow counters are queried from per priority counters register. Global flow control counters are stored in priority 0 PFC counters. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net/mlx5e: Expose RDMA VPort counters to ethtoolGal Pressman1-0/+16
Add the needed descriptors to expose RoCE RDMA counters. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net/mlx5e: Add support to get ethtool flow rulesMaor Gottlieb3-0/+47
Enhance the existing get_rxnfc callback: 1. Get flow rule of specific ID. 2. Get all flow rules. 3. Get number of rules. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net/mlx5e: Support l3/l4 flow type specs in ethtool flow steeringMaor Gottlieb3-2/+163
Add support to add flow steering rules with ethtool of L3/L4 flow types (ip4/tcp4/udp4). Those rules will be in higher priority than l2 flow rules, in order to prefer more specific rules. Mask is not supported for l3/l4 flow types. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net/mlx5e: Add ethtool flow steering supportMaor Gottlieb6-12/+455
Implement etrhtool set_rxnfc callback to support ethtool flow spec direct steering. This patch adds only the support of ether flow type spec. L3/L4 flow specs support will be added in downstream patches. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net/mlx5: Properly remove all steering objectsMaor Gottlieb1-105/+15
Instead of explicitly cleaning up the well known parts of the steering tree, we use the generic tree structure to traverse for cleanup. No functional changes. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net/mlx5: Introduce mlx5_flow_steering structureMaor Gottlieb2-59/+83
Instead of having all steering private name spaces and steering module fields flat in mlx5_core_priv, we wrap them in mlx5_flow_steering for better modularity and API exposure. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net/mlx5: Refactor mlx5_add_flow_ruleMaor Gottlieb6-217/+155
Reduce the set of arguments passed to mlx5_add_flow_rule by introducing flow_spec structure. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04net-next: mediatek: remove superfluous free_irq() callJohn Crispin1-1/+0
Commit 8067302973a1 ("net-next: mediatek: add support for IRQ grouping") adds handling for irq 1 and 2 to the uninit function but did not remove irq 0 which is not used since irq grouping was introduced. Fix this by removing the superfluous call to free_irq(). Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: John Crispin <john@phrozen.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04net: lpc_eth: Remove unused 'pldat' variableFabio Estevam1-1/+0
Since commit f786f3564c4f02d5026 ("net: ethernet: lpc_eth: use phydev from struct net_device") the 'pldat' variable became unused, so just remove it. Reported-by: Olof's autobuilder <build@lixom.net> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04mlxsw: spectrum: Enable L3 interfaces on top of bridge devicesIdo Schimmel3-1/+143
As with the previously introduced L3 interfaces, listen to 'inetaddr' notifications sent for bridges devices configured on top of the port netdevs and create / destroy router interfaces (RIFs) accordingly. This also includes VLAN devices configured on top of the VLAN-aware bridge. The RIFs will be destroyed either when the last IP address is removed or when the underlying FID is is destroyed. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04mlxsw: spectrum: Configure FIDs based on bridge eventsIdo Schimmel3-24/+107
Before introducing support for L3 interfaces on top of the VLAN-aware bridge we need to add some missing infrastructure. Such an interface can either be the bridge device itself or a VLAN device on top of it. In the first case the router interface (RIF) is associated with FID 1, which is created whenever the first port netdev joins the bridge. We currently assume the default PVID is 1 and that it's already created, as it seems reasonable. This can be extended in the future. However, in the second case it's entirely possible we've yet to create a matching FID. This can happen if the VLAN device was configured before making any bridge port member in the VLAN. Prevent such ordering problems by using the VLAN device's CHANGEUPPER event to configure the FID. Make the VLAN device hold a reference to the FID and prevent it from being destroyed even if none of the port netdevs is using it. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04mlxsw: spectrum: Unsplit the vFID rangeIdo Schimmel2-29/+30
Previous commit deprecated the vFIDs used to get traffic to the CPU ('port_vfids'). Thus, we now use the vFIDs as god intended and the artificial split is no longer needed. Rename functions and variables to reflect that. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04mlxsw: spectrum: Introduce support for router interfacesIdo Schimmel3-230/+357
Up until now we only supported bridged interfaces. Packets ingressing through the switch ports were either classified to FIDs (in the case of the VLAN-aware bridge) or vFIDs (in the case of VLAN-unaware bridges). The packets were then forwarded according to the FDB. Routing was done entirely in slowpath, by splitting the vFID range in two and using the lower 0.5K vFIDs as dummy bridges that simply flooded all incoming traffic to the CPU. Instead, allow packets to be routed in the device by creating router interfaces (RIFs) that will direct them to the router block. Specifically, the RIFs introduced here are Sub-port RIFs used for VLAN devices and port netdevs. Packets ingressing from the {Port / LAG ID, VID} with which the RIF was programmed with will be assigned to a special kind of FIDs called rFIDs and from there directed to the router. Create a RIF whenever the first IPv4 address was programmed on a VLAN / LAG / port netdev. Destroy it upon removal of the last IPv4 address. Receive these notifications by registering for the 'inetaddr' notification chain. A non-zero (10) priority is used for the notification block, so that RIFs will be created before routes are offloaded via FIB code. Note that another trigger for RIF destruction are CHANGEUPPER notifications causing the underlying FID's reference count to go down to zero. This can happen, for example, when a VLAN netdev with an IP address is put under bridge. While this configuration doesn't make sense it does cause the device and the kernel to get out of sync when the netdev is unbridged. We intend to address this in the future, hopefully in current cycle. Finally, Remove the lower 0.5K vFIDs, as they are deprecated by the RIFs, which will trap packets according to their DIP. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04mlxsw: spectrum: Edit RIF properties based on netdev eventsIdo Schimmel3-6/+86
We are just about to introduce router interfaces (RIFs), but before that we need to be able update the device with the correct RIF attributes whenever they change for the netdev the RIF is backing. Two such attributes are MTU and MAC. The MAC is used both to set the source MAC of packets egressing from the RIF and also to program an FDB rule that will direct packets to the router block. Use the existing netdevice notification block and respond to CHANGEADDR and CHANGEMTU accordingly. Store both attributes in the RIF struct in case we need to revert to old attributes following a failed update. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04mlxsw: spectrum: Add couple of lower device helper functionsJiri Pirko2-5/+63
Add functions that iterate over lower devices and find port device. As a dependency add netdev_for_each_all_lower_dev and netdev_for_each_all_lower_dev_rcu macro with netdev_all_lower_get_next and netdev_all_lower_get_next_rcu shelpers. Also, add functions to return mlxsw struct according to lower device found and mlxsw_port struct with a reference to lower device. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04mlxsw: spectrum_router: Implement fib4 add/del switchdev obj opsJiri Pirko3-0/+259
Implement ipv4 FIB entries addition and removal. Initially, we support local and broadcast routes using "ip2me" trap action. Also, unicast routes without nexthop are supported using "local" action. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04mlxsw: reg: Add Router Algorithmic LPM Unicast Entry Register definitionJiri Pirko1-0/+264
Serves for adding, updating and removing fib entries. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04mlxsw: spectrum_router: Add virtual router managementJiri Pirko2-0/+242
Virtual router is a construct used inside HW. In this implementation we map kernel tables to virtual routers one to one. Introduce management logic to create virtual routers when needed and destroy in case they are no longer in use. According to that, call into LPM tree management. Each virtual router is always bound to one LPM tree. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04mlxsw: spectrum_router: Implement LPM trees managementJiri Pirko2-1/+175
Introduce basic LPM tree management allowing to share the trees in between tables if the used prefixes in the tables are the same. Build the tree structure according to the used prefixes. Although it is not optimal for many use cases, this initial implementation does only simple linear left-tree. More advanced structures will be introduced later on, possibly including mechanisms to change trees on the fly. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04mlxsw: reg: Add Router Algorithmic LPM Tree Binding Register definitionJiri Pirko1-0/+45
This register is used to bind virtual router and protocol to an allocated LPM tree. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04mlxsw: reg: Add Router Algorithmic LPM Structure Tree Register definitionJiri Pirko1-0/+77
Serves to build LPM tree structure. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04mlxsw: reg: Add Router Algorithmic LPM Tree Allocation Register definitionJiri Pirko1-1/+53
Register serves for allocation and deallocation of LPM search tree. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04mlxsw: spectrum_router: Implement private fibJiri Pirko2-0/+127
Shadow FIB is needed in order to hold additional information for FIB entries and keep track of used prefixes. That is needed for the LPM tree construction to be introduced later on in this set. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04tun: fix build warningsJason Wang1-3/+5
Stephen Rothwell reports a build warnings(powerpc ppc64_defconfig) drivers/net/tun.c: In function 'tun_do_read.part.5': /home/sfr/next/next/drivers/net/tun.c:1491:6: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] int err; This is because tun_ring_recv() may return an uninitialized err, fix this. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04liquidio: Response header changesRaghu Vatsavayi1-6/+12
This patch changes response header to be able to communicate with new firmware interface. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04liquidio: Remove redundant codeRaghu Vatsavayi13-47/+51
This patch removes redundant file includes and conditions. Provides some meaningful comments and code alignment. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04liquidio: Droq validationRaghu Vatsavayi1-12/+0
This patch removes redudant droq num validation. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04liquidio: MTU limitsRaghu Vatsavayi3-11/+15
This patch limits the MTU between 68 bytes and 16000 bytes. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04liquidio: free resources during shutdownRaghu Vatsavayi4-8/+13
This patch fixes the issue of proper freeing of queue memory resources during free device. It also has fix for correct pcie error reporting. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04liquidio: iq/oq limitsRaghu Vatsavayi1-5/+1
This patch removes the dependency of number of iq/oq's on number of cpus. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04liquidio: softcommand delayRaghu Vatsavayi3-5/+5
This patch updates the delay constant for softcommands in accrodance with new requirements. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04liquidio: IQ synchronizationRaghu Vatsavayi1-11/+16
This patch tries to protect against bh preemption with sc_buf_pool. It also modifies the syncronization primitives during input queue processing. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04liquidio: Macro replacementsRaghu Vatsavayi17-321/+66
This patch has minor replacements of ACCESS_ONCE macros with WRITE_ONCE and replacement of BUG_ON with polite version WARN_ON. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04liquidio: Vxlan supportRaghu Vatsavayi6-5/+254
This patch adds support for Vxaln offloads in liquidio driver. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04net: ethernet: bcmgenet: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-26/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04net: ethernet: bcmgenet: use phydev from struct net_devicePhilippe Reynes3-39/+31
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04net: ethernet: arc: emac: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-38/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.