aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2015-01-22iwlwifi: mvm: document switch case fall-through in iwl_mvm_send_sta_keyJohn W. Linville1-0/+1
Add a comment indicating that the WLAN_CIPHER_SUITE_WEP104 case falls through to the WLAN_CIPHER_SUITE_WEP40 case in iwl_mvm_send_sta_key. This will document that the lack of a break is intentional. Coverity: CID 1260023 Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: rs: use STBC regardless of power save modeEyal Shapira1-8/+0
Tx STBC was used only when in CAM mode or if powersave is disabled. Effectively this meant we never used STBC as these modes aren't used on most platforms by default. Change that. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22Revert "iwlwifi: mvm: drop non VO frames when flushing"Emmanuel Grumbach1-9/+11
This is now implemented by mac80211 (commit below). mac80211 will flush/drop the frames on the queues before suspending / disconnecting. It will then send the deauth and wait until the queues are empty. commit 3b24f4c65386dc0f2efb41027bc6e410ea2c0049 Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Date: Wed Jan 7 15:42:39 2015 +0200 mac80211: let flush() drop packets when possible This reverts commit 4e6c48e0984e28d064ee8fbc292aee7b7920c507.
2015-01-22iwlwifi: mvm: add support for new LTR commandEmmanuel Grumbach3-9/+51
This new command will give finer granularity to configure the platform. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: BT Coex - fine tune the MPLUT registerEmmanuel Grumbach1-1/+1
This allow to better preserve the BT performance while WiFi is running. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22Merge remote-tracking branch 'iwlwifi-fixes/master' into iwlwifi-nextEmmanuel Grumbach12-46/+112
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Conflicts: drivers/net/wireless/iwlwifi/iwl-fw-file.h drivers/net/wireless/iwlwifi/mvm/scan.c
2015-01-22iwlwifi: mvm: move U-APSD decision to authenticationJohannes Berg2-5/+16
In order to change the usage of U-APSD on the fly later, move the enabling condition into a new function that is called when authenticated. This allows the module parameter to become writable, it won't take effect immediately but at least on the next association the new value will be used. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22Merge tag 'tags/mac80211-next-for-davem-2015-01-19' into iwlwifi-nextEmmanuel Grumbach32-173/+211
Some further updates for net-next: * fix network-manager which was broken by the previous changes * fix delete-station events, which were broken by me making the genlmsg_end() mistake * fix a timer left running during suspend in some race conditions that would cause an annoying (but harmless) warning * (less important, but in the tree already) remove 80+80 MHz rate reporting since the spec doesn't distinguish it from 160 MHz; as the bitrate they're both 160 MHz bandwidth
2015-01-22iwlwifi: mvm: ignore temperature updates in the RX statistics notificationLuciano Coelho2-1/+7
If the firmware sends spontaneous DTS notfications with the temperature (indicated in a TLV), we can ignore the temperature we get in the RX statistics notifications. This prevents potentially handling the same temperature change twice. It also ignores notifications with temperature equal to 0 that happens from time to time. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: rs: cleanup unuseful and overflowing tracesEyal Shapira1-3/+1
These aren't useful and overflowing so drop them and also fix a minor typo. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: generate statistics debugfs codeJohannes Berg2-86/+78
There's no need to duplicate the structure field name in the string, just generate the string in the macro that's there anyway. To keep the debugfs output the same, rename one (otherwise unused) field. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: move statistics API to new header fileJohannes Berg2-208/+278
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: sync statistics firmware APIJohannes Berg2-37/+37
The firmware API structs are split differently, synchronize the struct splits with the current firmware definitions. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: correctly set the NMI registerEmmanuel Grumbach2-4/+9
When we want to trigger an NMI in the device, we need to set bit 7 and not bit 0. However, older firmwares don't register to the interrupt issued by bit 7. Use bit 7 first so that the correct interrupt will be issued hoping that the firmware will react. To be on the safe side, set bit 0 in case the firmware didn't register to the proper interrupt. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: add rxf and txf to dump dataLiad Kaufman7-27/+304
When the FW is in error status - try to read the RXF and TXF (all of them) and add them to the dump data. This shouldn't happen in non-error statuses, as we don't want to stop the RXF/TXF while they are running. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: add support for dumping a secondary SRAMIdo Yariv3-4/+32
Some HW modules have two SRAMs. In such cases add the secondary SRAM to the list of dumped segments. Signed-off-by: Ido Yariv <idox.yariv@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: add debugfs file for misbehaving U-APSD APJohannes Berg1-0/+31
As this functionality relies on getting a firmware notification it is difficult to test. Allow accessing the data for it from debugfs to be able to trigger all kinds of scenarios to test. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: let the firmware configure the schedulerEmmanuel Grumbach9-106/+96
A new host command can be used to configure the scheduler instead of accessing the scheduler's registers from the driver. This is easier and less error prone since accessing the hardware at certain moments can lead to races with the firmware. Prefer to use the host command whenever it is available. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: scan dwell time correctionsDavid Spinadel2-5/+16
Use only basic dwell time (10 ms for active scan and 110 for passive), regardless of the number of the probes and the band, if it is supported by the FW. The FW will add 3 ms for each probe sent and 10 ms for low band channels. Add a TLV flag to indicate such support in FW. This fix is needed to fix few bugs regarding scans that take too much time. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: remove unused TLV capability flagsEmmanuel Grumbach1-6/+0
The driver doesn't support the firmwares that don't have these capabilities. The code that actually used these flags has been removed already, but the flags were left for an unclear reason. Remove them. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: add print of he nvm versionEran Harary1-0/+2
Print the nvm version in the log for debugging purposes. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: set max_out_time equal to frag_passive_dwell in fragmented scanHaim Dreyfuss1-2/+2
Fragmented scan should be applied for all channels, passive and active. When scanning on passive channels the firmware uses frag_passive_dwell to define the maximum continuous scan time before returning to the operating channel. On active channels max_out_time is the parameter used by the firmware to define the maximum time allowed out of the operating channel. Since active channels' scan should also be fragmented set max_out_time equal to frag_passive_dwell. In addition: - Set max_out_time and suspend_time if the firmware doesn't support fragmented scan to avoid unexpected behavior. - Adjust max_out_time for second level of scan precedence. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Reviewed-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: rs: allow to disable MIMO for P2P onlyEmmanuel Grumbach2-2/+2
This is to work around interoperability bugs with devices that don't hanle MIMO properly. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: allow to collect debug data from non-sleepable contextEmmanuel Grumbach2-7/+7
iwl_mvm_fw_dbg_collect allows to collect debug data from the firmware. Most of the firmware interaction is done in non-sleepable context. It makes little sense to force the caller of iwl_mvm_fw_dbg_collect to sleep. Defer the actual collection to a worker so that this function will be able to be called from any context. Reviewed-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: make sure state isn't in d0i3 when stopping fw monitorLiad Kaufman1-2/+7
In case platform is in d0i3 - make sure it is awake when writing the registers to stop the monitor when collecting FW debug data. Plus, remove unneeded mutex locking currently done. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: Add debugfs entry to enable scan offload notificationAlexander Bondar4-0/+48
This option enables scan offload iteration complete notification from firmware which includes the last iteration's status and the scanned channels from the current iteration. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: add new config and PCI IDs for 4165 seriesOren Givon3-0/+13
Add a new config for 4165 series over PCI and insert support for two new 4165 series PCI IDs. Signed-off-by: Oren Givon <oren.givon@intel.com> Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: make sure state isn't in d0i3 when collecting fw dbgLiad Kaufman3-0/+7
This makes sure that we're not trying to read/write any of the FW debug data collected during d0i3. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: rs: repeat initial legacy rates in LQ tableEyal Shapira2-11/+13
Repeating the legacy rates avoids degrading quickly to lower rates due to collisions which is common when doing TCP Tx traffic in legacy. This slightly improves TCP Tx throughput while working in legacy in different scenarios. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: don't indicate no BA if STA was in powersaveEyal Shapira1-1/+2
If Tx failed because the STA was in powersave there's no point in sending a BAR so avoid indicating AMPDU_NO_BACK to mac80211. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22Merge commit 'c1e140bf79d817d4a7aa9932eb98b0359c87af33' from mac80211-nextKalle Valo27-141/+146
Patch "ath9k: Fix no-ack frame status" needs these mac80211 patches: commit 5cf16616e152dd5c274a65954c77f64892d025a8 Author: Sujith Manoharan <c_manoha@qca.qualcomm.com> Date: Wed Dec 10 21:26:11 2014 +0530 mac80211: Fix accounting of multicast frames commit 6b127c71fbdd3daacfd8b9f80b8e6ebfb70a889e Author: Sujith Manoharan <c_manoha@qca.qualcomm.com> Date: Wed Dec 10 21:26:10 2014 +0530 mac80211: Move IEEE80211_TX_CTL_PS_RESPONSE Conflicts: drivers/net/wireless/ath/wil6210/cfg80211.c drivers/staging/rtl8723au/os_dep/ioctl_cfg80211.c
2015-01-21can: at91_can: remove unused variableMarc Kleine-Budde1-2/+0
This patch removes the unused variable "struct net_device *dev" from the "struct at91_priv". Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-01-21can: flexcan: remove unused variableMarc Kleine-Budde1-2/+0
This patch removes the unused variable "struct net_device *dev" from the "struct flexcan_priv". Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-01-21can: dev: fix semicolon.cocci warningskbuild test robot1-1/+1
drivers/net/can/dev.c:294:2-3: Unneeded semicolon Removes unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Cc: Andri Yngvason <andri.yngvason@marel.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-01-21can: c_can: end pending transmission on network stop (ifdown)Viktor Babrian1-0/+3
Put controller into init mode in network stop to end pending transmissions. The issue is observed in cases when transmitted frame is not acked. Signed-off-by: Viktor Babrian <babrian.viktor@renyi.mta.hu> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-01-21virtio/net: verify device has config spaceMichael S. Tsirkin1-0/+6
Some devices might not implement config space access (e.g. remoteproc used not to - before 3.9). virtio/net needs config space access so make it fail gracefully if not there. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-01-21Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcuIngo Molnar1-0/+1
Pull RCU updates from Paul E. McKenney: - Documentation updates. - Miscellaneous fixes. - Preemptible-RCU fixes, including fixing an old bug in the interaction of RCU priority boosting and CPU hotplug. - SRCU updates. - RCU CPU stall-warning updates. - RCU torture-test updates. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-20can: move can_stats.bus_off++ from can_bus_off into can_change_stateAndri Yngvason16-2/+17
In order to be able to move the stats increment from can_bus_off() into can_change_state(), the increment had to be moved back into code that was using can_bus_off() but not can_change_state(). As a side-effect, this patch fixes the following bugs: * Redundant call to can_bus_off() in c_can. * Bus-off counted twice in xilinx_can. Signed-off-by: Andri Yngvason <andri.yngvason@marel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-01-20iwlwifi: mvm: validate tid and sta_id in ba_notifEyal Shapira1-0/+5
These are coming from the FW and are used to access arrays. Bad values can cause an out of bounds access so discard such ba_notifs and warn. CC: <stable@vger.kernel.org> [3.10+] Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-19s2io: use snprintf() as a safety featureDan Carpenter1-3/+8
"sp->desc[i]" has 25 characters. "dev->name" has 15 characters. If we used all 15 characters then the sprintf() would overflow. I changed the "sprintf(sp->name, "%s Neterion %s"" to snprintf(), as well, even though it can't overflow just to be consistent. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19Merge tag 'mac80211-next-for-davem-2015-01-19' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextDavid S. Miller2-6/+8
Some further updates for net-next: * fix network-manager which was broken by the previous changes * fix delete-station events, which were broken by me making the genlmsg_end() mistake * fix a timer left running during suspend in some race conditions that would cause an annoying (but harmless) warning * (less important, but in the tree already) remove 80+80 MHz rate reporting since the spec doesn't distinguish it from 160 MHz; as the bitrate they're both 160 MHz bandwidth Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19r8152: remove sram_readhayeswang1-18/+6
Read OCP register 0xa43a~0xa43b would clear some flags which the hw would use, and it may let the device lost. However, the unit of reading is 4 bytes. That is, it would read 0xa438~0xa43b when calling sram_read() to read OCP_SRAM_DATA. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19r8152: remove generic_ocp_read before writinghayeswang1-6/+0
For ocp_write_word() and ocp_write_byte(), there is a generic_ocp_read() which is used to read the whole 4 byte data, keep the unchanged bytes, and modify the expected bytes. However, the "byen" could be used to determine which bytes of the 4 bytes to write, so the action could be removed. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19bgmac: activate irqs only if there is nothing to pollHauke Mehrtens1-3/+3
IRQs should only get activated when there is nothing to poll in the queue any more and to after every poll. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19bgmac: register napi before the deviceHauke Mehrtens1-3/+3
napi should get registered before the netdev and not after. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19mii: Handle link state changes for forced modes in mii_check_media()Ben Hutchings3-7/+10
mii_check_media() does not update the link (carrier) state or log link changes when the link mode is forced. Drivers using the mii library must do this themselves, but most of them do not. Instead of changing them all, provide a sensible default behaviour similar to mii_check_link() when the mode is forced. via-rhine depends on it being a no-op in this case, so make its call to mii_check_media() conditional. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19sh_eth: Fix ethtool operation crash when net device is downBen Hutchings1-0/+10
The driver connects and disconnects the PHY device whenever the net device is brought up and down. The ethtool get_settings, set_settings and nway_reset operations will dereference a null or dangling pointer if called while it is down. I think it would be preferable to keep the PHY connected, but there may be good reasons not to. As an immediate fix for this bug: - Set the phydev pointer to NULL after disconnecting the PHY - Change those three operations to return -ENODEV while the PHY is not connected Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19sh_eth: Fix promiscuous mode on chips without TSUBen Hutchings1-9/+9
Currently net_device_ops::set_rx_mode is only implemented for chips with a TSU (multiple address table). However we do need to turn the PRM (promiscuous) flag on and off for other chips. - Remove the unlikely() from the TSU functions that we may safely call for chips without a TSU - Make setting of the MCT flag conditional on the tsu capability flag - Rename sh_eth_set_multicast_list() to sh_eth_set_rx_mode() and plumb it into both net_device_ops structures - Remove the previously-unreachable branch in sh_eth_rx_mode() that would otherwise reset the flags to defaults for non-TSU chips Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19net: netcp: Enhance GBE driver to support 10G EthernetWingman Kwok3-15/+958
This patch enhances the NetCP gbe driver to support 10GbE subsystem available in Keystone NetCP. The 3-port 10GbE switch sub-module contains the following components:- 10GbE Switch, MDIO Module, 2 PCS-R Modules (10GBase-R) and 2 SGMII modules (10/100/1000Base-T). The GBE driver together with netcp core driver provides support for 10G Ethernet on Keystone SoCs. 10GbE hardware spec is available at http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=spruhj5&fileType=pdf Cc: David Miller <davem@davemloft.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Santosh Shilimkar <santosh.shilimkar@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Signed-off-by: Wingman Kwok <w-kwok2@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19net: netcp: Add Keystone NetCP GbE driverWingman Kwok3-1/+1847
This patch add support for 1G Ethernet driver based on Keystone NetCP hardware. The gigabit Ethernet (GbE) switch subsystem is one of the main components of the network coprocessor (NETCP) peripheral. The purpose of the gigabit Ethernet switch subsystem in the NETCP is to provide an interface to transfer data between the host device and another connected device in compliance with the Ethernet protocol. GbE consists of 5 port Ethernet Switch module, 4 Serial Gigabit Media Independent Interface (SGMII) modules, MDIO module and SerDes. Driver for 5 port GbE switch and SGMII module is added in this patch. These hardware modules along with netcp core driver provides Network driver functions for 1G Ethernet. Detailed hardware spec is available at http://www.ti.com/lit/ug/sprugv9d/sprugv9d.pdf Cc: David Miller <davem@davemloft.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Santosh Shilimkar <santosh.shilimkar@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Signed-off-by: Wingman Kwok <w-kwok2@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.