aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2015-01-07orinoco_usb: Use setup_timerJulia Lawall1-3/+1
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-07iwl3945: Use setup_timerJulia Lawall1-3/+1
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-07iwl4965: Use setup_timerJulia Lawall1-6/+3
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-07cw1200: queue: Use setup_timerJulia Lawall1-3/+1
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-07cw1200: main: Use setup_timerJulia Lawall1-3/+2
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-07wireless: cw1200: Use setup_timerJulia Lawall1-3/+2
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-07rt2x00: use helper to check capability/requirementFred Chou6-26/+26
Use rt2x00_has_cap_flag macro to check rt2x00dev->cap_flags. Signed-off-by: Fred Chou <fred.chou.nd@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-07wil6210: use 'uint64_t' instead of 'cycles_t' to avoid warningsChen Gang1-2/+2
do_div() checks the type strictly. 'cycles_t' may be 32-bit under quite a few architectures (parisc, arm, avr32 ...). So use 'uint64_t' instead of, the related warning (with allmodconfig under parisc): CC [M] drivers/net/wireless/ath/wil6210/debugfs.o In file included from arch/parisc/include/generated/asm/div64.h:1:0, from include/linux/kernel.h:124, from include/linux/list.h:8, from include/linux/module.h:9, from drivers/net/wireless/ath/wil6210/debugfs.c:17: drivers/net/wireless/ath/wil6210/debugfs.c: In function ‘wil_vring_debugfs_show’: include/asm-generic/div64.h:43:28: warning: comparison of distinct pointer types lacks a cast (void)(((typeof((n)) *)0) == ((uint64_t *)0)); \ ^ drivers/net/wireless/ath/wil6210/debugfs.c:107:4: note: in expansion of macro ‘do_div’ do_div(idle, total); ^ In file included from include/uapi/linux/stddef.h:1:0, from include/linux/stddef.h:4, from ./include/uapi/linux/posix_types.h:4, from include/uapi/linux/types.h:13, from include/linux/types.h:5, from include/linux/list.h:4, from include/linux/module.h:9, from drivers/net/wireless/ath/wil6210/debugfs.c:17: include/asm-generic/div64.h:44:18: warning: right shift count >= width of type [-Wshift-count-overflow] if (likely(((n) >> 32) == 0)) { \ ^ include/linux/compiler.h:159:40: note: in definition of macro ‘likely’ # define likely(x) __builtin_expect(!!(x), 1) ^ drivers/net/wireless/ath/wil6210/debugfs.c:107:4: note: in expansion of macro ‘do_div’ do_div(idle, total); ^ In file included from arch/parisc/include/generated/asm/div64.h:1:0, from include/linux/kernel.h:124, from include/linux/list.h:8, from include/linux/module.h:9, from drivers/net/wireless/ath/wil6210/debugfs.c:17: include/asm-generic/div64.h:48:22: warning: passing argument 1 of ‘__div64_32’ from incompatible pointer type [-Wincompatible-pointer-types] __rem = __div64_32(&(n), __base); \ ^ drivers/net/wireless/ath/wil6210/debugfs.c:107:4: note: in expansion of macro ‘do_div’ do_div(idle, total); ^ include/asm-generic/div64.h:35:17: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘cycles_t * {aka long unsigned int *}’ extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor); ^ Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller18-48/+72
2015-01-06i40e: Fix bug with TCP over IPv6 over VXLANAnjali Singhai1-13/+11
The driver was examining the outer protocol layer to set the inner protocol layer checksum offload. In the case of TCP over IPV6 over an IPv4 based VXLAN the inner checksum offloads would be set to look for IPv4/UDP instead of IPv6/TCP. This code fixes that so that the driver will look at the proper layer for encapsulation offload settings. Signed-off-by: Anjali Singhai <anjali.singhai@intel.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-06i40e: Fix Rx checksum error counterAnjali Singhai1-11/+13
The Rx port checksum error counter was incrementing incorrectly with UDP encapsulated tunneled traffic. This patch fixes the problem so that the port_rx_csum counter will show accurate statistics. Signed-off-by: Anjali Singhai <anjali.singhai@intel.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-06i40e: fix un-necessary Tx hangsJesse Brandeburg2-8/+49
When the driver was polling with interrupts disabled the hardware will occasionally not write back descriptors. This patch causes the driver to detect this situation and force an interrupt to fire which will flush the stuck descriptor. Does not conflict with napi because if we are already polling the napi_schedule is ignored. Additionally the extra interrupts are rate limited, so don't cause a burden to the CPU. Change-ID: Iba4616d2a71288672a5f08e4512e2704b97335e8 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-06net: eth: xgene: change APM X-Gene SoC platform ethernet to support ACPIFeng Kan3-44/+150
This adds support for APM X-Gene ethernet driver to use ACPI table to derive ethernet driver parameter. Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-06qla3xxx: don't allow never end busy loopAndy Shevchenko1-5/+3
The counter variable wasn't increased at all which may stuck under certain circumstances. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-06net/fsl: Add mEMAC MDIO support to XGMAC MDIOAndy Fleming2-12/+55
The Freescale mEMAC supports operating at 10/100/1000/10G, and its associated MDIO controller is likewise capable of operating both Clause 22 and Clause 45 MDIO buses. It is nearly identical to the MDIO controller on the XGMAC, so we just modify that driver. Portions of this driver developed by: Sandeep Singh <sandeep@freescale.com> Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-06mwifiex: Add support for wowlan disconnectMaithili Hinge1-1/+16
This patch adds support for wowlan disconnect. Signed-off-by: Maithili Hinge <maithili@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: Move code for wowlan magic-packet and patterns to a functionMaithili Hinge1-31/+47
This patch moves code for wowlan magic-packet and patterns to a function mwifiex_set_mef_filter. Signed-off-by: Maithili Hinge <maithili@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: Increase priority of firmware download messageAmitkumar Karwar3-5/+6
When driver is loaded, it is important to know if FW was already active or it is freshly downloaded. This patch increases the priority of these messages. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: do not release lock during list_for_each_entry_safe()Amitkumar Karwar1-6/+0
As we are releasing the lock, during next iteration we may end up getting page fault if other thread has already deleted that node. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: wakeup pending wait queuesAmitkumar Karwar1-0/+2
Wakeup pending wait queues in unload path. This will help to avoid soft lockup issues in corner cases. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: add wakeup timer based recovery mechanismAmitkumar Karwar6-0/+24
If host fails to wakeup the firmware, we will trigger card reset after 3 second timeout. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: increase delay during card resetMarc Yang1-2/+2
200ms is the requirement to allow VDD1.1 and VDD1.8 to drop to have proper reset. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: Adjust calling place of mwifiex_terminate_workqueueMarc Yang1-2/+2
Workqueue needs to be flushed early when removing card, otherwise soft lockup issue may happen because main_process is triggered by interrupt while card is being removed. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: remove redundant flag MWIFIEX_HW_STATUS_FW_READYAmitkumar Karwar2-5/+2
This flag is never set but checked at two places. We will get rid of this code. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06xen-netback: fixing the propagation of the transmit shaper timeoutPalik, Imre1-0/+1
Since e9ce7cb6b107 ("xen-netback: Factor queue-specific data into queue struct"), the transimt shaper timeout is always set to 0. The value the user sets via xenbus is never propagated to the transmit shaper. This patch fixes the issue. Cc: Anthony Liguori <aliguori@amazon.com> Signed-off-by: Imre Palik <imrep@amazon.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-06Driver: Vmxnet3: Make Rx ring 2 size configurableShrikrishna Khare4-10/+30
Rx ring 2 size can be configured by adjusting rx-jumbo parameter of ethtool -G. Signed-off-by: Ramya Bolla <bollar@vmware.com> Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-06mwifiex: get supported BA stream info from FWAvinash Patil2-3/+12
This patch adds support to get number of BA streams supported information from FW. Some newer chips(e.g. 8897 series) support 4 BA streams for TX; so driver should not disallow BA stream setup just after 2 streams have been established. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: make tx packet 64 byte DMA alignedXinming Hu4-28/+43
This patch adds support for DMA alignment of 64 bytes for TX packets. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: do not send key material cmd when delete wep keyXinming Hu1-1/+5
This patch fixes memory corruption reported by community developer. "Memory corruption occurs in mwifiex_ret_802_11_key_material_v1() when a short command response is received without a key length causing non initialised memory to be interpreted as the key length resulting in a memcpy() overwriting the part of the driver's private data structure beyond the key area." For v1 key material API firmwares, there is no need to send command to delete WEP key. WEP encryption/decryption is controlled by mac_control command. This patch avoids sending key material command in del_key case. Reported-by: Martin Fuzzey <mfuzzey@parkeon.com> Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: enable -D__CHECK_ENDIAN__ for sparse by defaultAvinash Patil1-0/+2
Enable the endian checks by default. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06brcmfmac: Add support for bcm43340/1 wireless chipsetsArend van Spriel4-0/+11
This patch adds support for the bcm43340 and bcm43341 wireless chipsets. These two chipsets are identical from wireless parts perspective. As such they use the same firmware image. Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Rob Herring <rob.herring@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> [arend@broadcom.com: squash to single commit, remove 43341 chipid] Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06rcu: Make SRCU optional by using CONFIG_SRCUPranith Kumar1-0/+1
SRCU is not necessary to be compiled by default in all cases. For tinification efforts not compiling SRCU unless necessary is desirable. The current patch tries to make compiling SRCU optional by introducing a new Kconfig option CONFIG_SRCU which is selected when any of the components making use of SRCU are selected. If we do not select CONFIG_SRCU, srcu.o will not be compiled at all. text data bss dec hex filename 2007 0 0 2007 7d7 kernel/rcu/srcu.o Size of arch/powerpc/boot/zImage changes from text data bss dec hex filename 831552 64180 23944 919676 e087c arch/powerpc/boot/zImage : before 829504 64180 23952 917636 e0084 arch/powerpc/boot/zImage : after so the savings are about ~2000 bytes. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com> CC: Josh Triplett <josh@joshtriplett.org> CC: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ paulmck: resolve conflict due to removal of arch/ia64/kvm/Kconfig. ]
2015-01-06mwifiex: module parameter for deep sleep configurationAvinash Patil1-1/+6
This patch adds module parameter for auto deepsleep configuration. By default, module_param is 0 and auto deep sleep is enabled. If mwifiex driver is loaded with disable_auto_ds=1, deep sleep configuration would not be downloaded to FW and FW would not enter deepsleep upon initializing. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: save sdio register values before firmware dumpXinming Hu4-0/+127
This patch saves sdio registers value before firmware dump, this can be used to find out reason for FW dump. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: save driver information to file when firmware dumpXinming Hu5-1/+133
This patch adds support to dump driver information to a file when firmware dump happens. This information can be used to root casue FW crash. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: move debug_data dump function to common utililty fileXinming Hu3-180/+198
mwifiex_debug_info also need be save to file when firmware dump happens. Move its dump implementation function to commmon utilility file, thus it can be reused in firmware dump function. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: move pm_wakeup_card_complete definition to usb.cXinming Hu2-7/+7
Move mwifiex_pm_wakeup_card_complete handler to source file. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: add rx histogram statistics supportXinming Hu10-0/+219
This patch add a new debugfs item histogram used for reporting rx data packet statitics(rx rate, snr, noise floor, signal strenth) to userspace. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: add bcn_rcv_cnt and bcn_miss_cnt in getlog debugfsXinming Hu4-2/+14
This patch add receive beacon count and miss beacon count statistics in debugfs getlog item. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: report tdls peers in debugfsXinming Hu6-1/+52
This patch add provision to show TDLS peer table in debugfs file. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06ath5k: drop owner assignment from platform_driversWolfram Sang1-1/+0
This platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06brcmfmac: enable 802.11d support in firmwareArend van Spriel3-0/+29
When the driver gets beacon info containing a country IE from user-space upon .start_ap() callback, it will enable regulatory 802.11d support. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06brcmfmac: signal completion of 802.1x.Hante Meuleman5-4/+57
Use cfg80211 change_station to signal the completion of 802.1x to firmware. This allows FW to take appropriate actions. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06brcmfmac: follow user-space regulatory domain selectionArend van Spriel2-1/+38
When user-space uses a valid ISO-3166-1 country code for its regulatory domain selection, the driver will try to configure the firmware to use the same. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06r8152: support ndo_features_checkhayeswang1-0/+17
Support ndo_features_check to avoid: - the transport offset is more than the hw limitation when using hw checksum. - the skb->len of a GSO packet is more than the limitation. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-06brcmfmac: Change error log in standard log for rxbufpost.Hante Meuleman1-1/+1
When there is no room in the ring for rxbufpost an error is logged, however this happens quite frequently and can be considered normal and is certainly recoverable. This patch changes the erorr into a normal msgbuf log. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06brcmfmac: Fix WEP configuration for AP mode.Hante Meuleman4-30/+76
When a device is configured for AP mode and it is configured for WEP then the keys are plumbed first, followed by AP configuration. During configuration a down command is given to the firmware which will clear the configured keys. This patch reprograms the WEP keys after AP has been brought up. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06brcmfmac: remove unused/duplicate defines in chip.cArend van Spriel1-14/+0
The source file chip.c contained some duplicate defines and some unused ones. Removing them. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06brcmfmac: Fix incorrect casting of 64 bit physical address.Hante Meuleman2-16/+16
The physical addresses being used by pcie and msgbuf were using a cast to long, which incorrectly caused it to limit the address to 32bit. Now explicit u64 is used where needed. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06cxgb4: Add PCI device ID for new T5 adapterHariprasad Shenai1-0/+1
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.