aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-10-18Merge branch 'timer_setup' into for-nextDoug Ledford1-6/+4
Conflicts: drivers/infiniband/hw/cxgb4/cm.c drivers/infiniband/hw/qib/qib_driver.c drivers/infiniband/hw/qib/qib_mad.c There were minor fixups needed in these files. Just minor context diffs due to patches from independent sources touching the same basic area. Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-18Merge branch 'for-next-early' into for-nextDoug Ledford3-318/+548
The early for-next branch was based on v4.14-rc2, while the shared pull request I got from Mellanox used a v4.14-rc4 base. I'm making the branch that was the shared Mellanox pull request the new for-next branch and merging the early for-next branch into it. Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-14RDMA/cxgb3: Annotate an RCU pointerBart Van Assche1-1/+1
Annotate t3cdev.l2opt with __rcu since it is used as an RCU pointer. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-14net/mlx5e: IPoIB, Modify rdma netdev allocate and free to support PKEYAlex Vesker3-18/+36
Resources such as FT, QPN HT and mdev resources should be allocated only by parent netdev. Shared resources are allocated and freed by the parent interface since the parent is always present and created before the IPoIB PKEY sub-interface. Signed-off-by: Alex Vesker <valex@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
2017-10-14net/mlx5e: IPoIB, Add PKEY child interface ethtool opsAlex Vesker3-2/+8
Similar to VLAN interfaces child interfaces have limited ethtool support. In current code the main limitation that does not allow child interface ethtool configuration is due to shared resources which are managed by the parent. Signed-off-by: Alex Vesker <valex@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
2017-10-14net/mlx5e: IPoIB, Add PKEY child interface ndosAlex Vesker3-7/+144
Child interface ndos will be called to support child interface specific behaviour. ndo_init flow: -Acquire shared QPN to net-device HT from parent -Continue with the same flow as parent interface ndo_open flow: -Initialize child underlay QP and connect to shared FT -Create child send TIS -Open child send channels Signed-off-by: Alex Vesker <valex@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
2017-10-14net/mlx5e: IPoIB, Add PKEY child interface nic profileAlex Vesker3-6/+102
Child interface profile will be called to support child interface specific behaviour. The child code is sparse compared to the parent since the RX channels are shared between the interfaces. Creating a septate profile for child and parent will make a smother code with a better ability for future expansion. The profile stuct is exposed to the parent using a getter function. Signed-off-by: Alex Vesker <valex@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
2017-10-14net/mlx5e: IPoIB, Use hash-table to map between QPN to child netdevAlex Vesker5-2/+184
This change is needed for PKEY support, since the RQs are shared between the child interface and the parent. The parent is responsible for NAPI and the precessing of RX completions. Using the dqpn in the completion descriptor we set the corresponding child IPoIB netdevice on the SKB. The mapping between the dqpn and the netdevice is done using a HT, each mlx5 IPoIB interface registers its mapping on creation. Signed-off-by: Alex Vesker <valex@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
2017-10-14net/mlx5e: IPoIB, Support for setting PKEY index to underlay QPAlex Vesker2-0/+10
Added a function to set PKEY index to IPoIB device driver using the already present set_id function. PKEY index is attached to the QP during state modification. Signed-off-by: Alex Vesker <valex@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
2017-10-14net/mlx5: Support for attaching multiple underlay QPs to root flow tableAlex Vesker5-54/+171
Previous support allowed connecting only a single QPN to the FT. Now using a linked list multiple QPNs can be attached to the same FT. Supporting attaching multiple underlay QPs is required for PKEY support in which child and parent share the same FT. The actual attaching/detaching FW commands will be called inside the function symmetrically. This change requires a change in IPoIB open and close functions, the attaching/detaching to/from the FT is done each time we open/close. Signed-off-by: Alex Vesker <valex@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2017-10-14net/mlx5e: IPoIB, Move underlay QP init/uninit to separate functionsAlex Vesker1-38/+70
During the creation of the underlay QP the PKEY index is unknown, the PKEY index is known only when calling ndo_open. PKEY index attached to the QP during state modification. Splitting the functions will also make the code symmetric and more readable. This split is also required for later PKEY support to be called with the PKEY index during ndo_open. Signed-off-by: Alex Vesker <valex@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2017-10-14net/mlx5: PTP code migration to driver core sectionFeras Daoud11-382/+392
PTP code is moved to core section of mlx5 driver in order to share it between ethernet and infiniband. This movement involves the following changes: - Change mlx5e_ prefix to be mlx5_ - Add clock structs to Core - Add clock object to mlx5_core_dev - Call Init/Uninit clock from core init/cleanup - Rename mlx5e_tstamp to be mlx5_clock Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Eitan Rabin <rabin@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-10-14net/mlx5: File renaming towards ptp core implementationFeras Daoud3-3/+3
en_clock.c renamed clock.c and moved to lib/ as first step towards relocating code to core part of the driver to allow sharing between Ethernet and Infiniband. Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Eitan Rabin <rabin@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-10-09net/mlx4_core: Convert timers to use timer_setup()Kees Cook1-6/+4
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Tariq Toukan <tariqt@mellanox.com> Cc: netdev@vger.kernel.org Cc: linux-rdma@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-03net: stmmac: dwmac-rk: Add RK3128 GMAC supportDavid Wu1-0/+112
Add constants and callback functions for the dwmac on rk3128 soc. As can be seen, the base structure is the same, only registers and the bits in them moved slightly. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03rndis_host: support Novatel Verizon USB730LAleksander Morgado2-1/+14
Treat the ef/04/01 interface class/subclass/protocol combination used by the Novatel Verizon USB730L (1410:9030) as a possible RNDIS interface. T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 3 P: Vendor=1410 ProdID=9030 Rev=03.10 S: Manufacturer=Novatel Wireless S: Product=MiFi USB730L S: SerialNumber=0123456789ABCDEF C: #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host I: If#= 2 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid Once the network interface is brought up, the user just needs to run a DHCP client to get IP address and routing setup. As a side note, other Novatel Verizon USB730L models with the same vid:pid end up exposing a standard ECM interface which doesn't require any other kernel update to make it work. Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Reviewed-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02mlxsw: spectrum_router: Track RIF of IPIP next hopsPetr Machata1-2/+11
When considering whether to set RTNH_F_OFFLOAD flag on an IPv6 route, mlxsw_sp_fib6_entry_offload_set() looks up the mlxsw_sp_nexthop corresponding to a given route, and decides based on whether the next hop's offloaded flag was set. When looking for the matching next hop, it also takes into account the device of the route, which must match next hop's RIF. IPIP next hops however hitherto didn't set the RIF. As a result, IPv6 routes forwarding traffic to IP-in-IP netdevices are never marked as offloaded, even when they actually are. Thus track RIF of IPIP next hops the same way as that of ETHERNET next hops. Fixes: 8f28a3097645 ("mlxsw: spectrum_router: Support IPv6 overlay encap") Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02mlxsw: spectrum_router: Move VRF refcountingPetr Machata1-2/+3
When creating a new RIF, bumping RIF count of the containing VR is the last thing to be done. Symmetrically, when destroying a RIF, RIF count is first dropped and only then the rest of the cleanup proceeds. That's a problem for loopback RIFs. Those hold two VR references: one for overlay and one for underlay. mlxsw_sp_rif_destroy() releases the overlay one, and the deconfigure() callback the underlay one. But if both overlay and underlay are the same, and if there are no other artifacts holding the VR alive, this put actually destroys the VR. Later on, when mlxsw_sp_rif_destroy() calls mlxsw_sp_vr_put() for the same VR, the VR will already have been released and the kernel crashes with NULL pointer dereference. The underlying problem is that the RIF under destruction ends up referencing the overlay VR much longer than it claims: all the way until the call to mlxsw_sp_vr_put(). So line up the reference counting properly to reflect this. Make corresponding changes in mlxsw_sp_rif_create() as well for symmetry. Fixes: 6ddb7426a7d4 ("mlxsw: spectrum_router: Introduce loopback RIFs") Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: hns3: Fix an error handling path in 'hclge_rss_init_hw()'Christophe JAILLET1-1/+2
If this sanity check fails, we must free 'rss_indir'. Otherwise there is a memory leak. 'goto err' as done in the other error handling paths to fix it. Fixes: 46a3df9f9718 ("net: hns3: Fix for setting rss_size incorrectly") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: mvpp2: Fix clock resource by adding an optional bus clockGregory CLEMENT1-0/+15
On Armada 7K/8K we need to explicitly enable the bus clock. The bus clock is optional because not all the SoCs need them but at least for Armada 7K/8K it is actually mandatory. The binding documentation is updating accordingly. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01r8152: add Linksys USB3GIGV1 idGrant Grundler2-0/+12
This linksys dongle by default comes up in cdc_ether mode. This patch allows r8152 to claim the device: Bus 002 Device 002: ID 13b1:0041 Linksys Signed-off-by: Grant Grundler <grundler@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01ppp: fix __percpu annotationGuillaume Nault1-1/+1
Move sparse annotation right after pointer type. Fixes sparse warning: drivers/net/ppp/ppp_generic.c:1422:13: warning: incorrect type in initializer (different address spaces) drivers/net/ppp/ppp_generic.c:1422:13: expected void const [noderef] <asn:3>*__vpp_verify drivers/net/ppp/ppp_generic.c:1422:13: got int *<noident> ... Fixes: e5dadc65f9e0 ("ppp: Fix false xmit recursion detect with two ppp devices") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-29Merge tag 'mlx5-fixes-2017-09-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller14-27/+128
Saeed Mahameed says: ==================== mlx5-fixes-2017-09-28 Misc. fixes for mlx5 drivers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: dsa: mv88e6xxx: lock mutex when freeing IRQsVivien Didelot1-0/+2
mv88e6xxx_g2_irq_free locks the registers mutex, but not mv88e6xxx_g1_irq_free, which results in a stack trace from assert_reg_lock when unloading the mv88e6xxx module. Fix this. Fixes: 3460a5770ce9 ("net: dsa: mv88e6xxx: Mask g1 interrupts and free interrupt") Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: stmmac: dwmac4: Re-enable MAC Rx before powering downEd Blake1-0/+7
Re-enable the MAC receiver by setting CONFIG_RE before powering down, as instructed in section 6.3.5.1 of [1]. Without this the MAC fails to receive WoL packets and never wakes up. [1] DWC Ethernet QoS Databook 4.10a October 2014 Signed-off-by: Ed Blake <ed.blake@sondrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: stmmac: dwc-qos: Add suspend / resume supportEd Blake1-0/+1
Add hook to stmmac_pltfr_pm_ops for suspend / resume handling. Signed-off-by: Ed Blake <ed.blake@sondrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: dsa: mv88e6xxx: Allow dsa and cpu ports in multiple vlansAndrew Lunn1-0/+4
Ports with the same VLAN must all be in the same bridge. However the CPU and DSA ports need to be in multiple VLANs spread over multiple bridges. So exclude them when performing this test. Fixes: b2f81d304cee ("net: dsa: add CPU and DSA ports as VLAN members") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: mvpp2: do not select the internal source clockAntoine Tenart1-2/+1
This patch stops the internal MAC Tx clock from being enabled as the internal clock isn't used. The definition used for the bit controlling this behaviour is renamed as well as it was wrongly named (bit 4 of GMAC_CTRL_2_REG). Fixes: 3919357fb0bb ("net: mvpp2: initialize the GMAC when using a port") Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: mvpp2: fix port list indexingYan Markman1-3/+5
The private port_list array has a list of pointers to mvpp2_port instances. This list is allocated given the number of ports enabled in the device tree, but the pointers are set using the port-id property. If on a single port is enabled, the port_list array will be of size 1, but when registering the port, if its id is not 0 the driver will crash. Other crashes were encountered in various situations. This fixes the issue by using an index not equal to the value of the port-id property. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Yan Markman <ymarkman@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: mvpp2: fix parsing fragmentation detectionStefan Chulski1-6/+14
Parsing fragmentation detection failed due to wrong configured parser TCAM entry's. Some traffic was marked as fragmented in RX descriptor, even it wasn't IP fragmented. The hardware also failed to calculate checksums which lead to use software checksum and caused performance degradation. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Stefan Chulski <stefanc@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28tun: bail out from tun_get_user() if the skb is emptyAlexander Potapenko1-3/+5
KMSAN (https://github.com/google/kmsan) reported accessing uninitialized skb->data[0] in the case the skb is empty (i.e. skb->len is 0): ================================================ BUG: KMSAN: use of uninitialized memory in tun_get_user+0x19ba/0x3770 CPU: 0 PID: 3051 Comm: probe Not tainted 4.13.0+ #3140 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: ... __msan_warning_32+0x66/0xb0 mm/kmsan/kmsan_instr.c:477 tun_get_user+0x19ba/0x3770 drivers/net/tun.c:1301 tun_chr_write_iter+0x19f/0x300 drivers/net/tun.c:1365 call_write_iter ./include/linux/fs.h:1743 new_sync_write fs/read_write.c:457 __vfs_write+0x6c3/0x7f0 fs/read_write.c:470 vfs_write+0x3e4/0x770 fs/read_write.c:518 SYSC_write+0x12f/0x2b0 fs/read_write.c:565 SyS_write+0x55/0x80 fs/read_write.c:557 do_syscall_64+0x242/0x330 arch/x86/entry/common.c:284 entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.S:245 ... origin: ... kmsan_poison_shadow+0x6e/0xc0 mm/kmsan/kmsan.c:211 slab_alloc_node mm/slub.c:2732 __kmalloc_node_track_caller+0x351/0x370 mm/slub.c:4351 __kmalloc_reserve net/core/skbuff.c:138 __alloc_skb+0x26a/0x810 net/core/skbuff.c:231 alloc_skb ./include/linux/skbuff.h:903 alloc_skb_with_frags+0x1d7/0xc80 net/core/skbuff.c:4756 sock_alloc_send_pskb+0xabf/0xfe0 net/core/sock.c:2037 tun_alloc_skb drivers/net/tun.c:1144 tun_get_user+0x9a8/0x3770 drivers/net/tun.c:1274 tun_chr_write_iter+0x19f/0x300 drivers/net/tun.c:1365 call_write_iter ./include/linux/fs.h:1743 new_sync_write fs/read_write.c:457 __vfs_write+0x6c3/0x7f0 fs/read_write.c:470 vfs_write+0x3e4/0x770 fs/read_write.c:518 SYSC_write+0x12f/0x2b0 fs/read_write.c:565 SyS_write+0x55/0x80 fs/read_write.c:557 do_syscall_64+0x242/0x330 arch/x86/entry/common.c:284 return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.S:245 ================================================ Make sure tun_get_user() doesn't touch skb->data[0] unless there is actual data. C reproducer below: ========================== // autogenerated by syzkaller (http://github.com/google/syzkaller) #define _GNU_SOURCE #include <fcntl.h> #include <linux/if_tun.h> #include <netinet/ip.h> #include <net/if.h> #include <string.h> #include <sys/ioctl.h> int main() { int sock = socket(PF_INET, SOCK_STREAM, IPPROTO_IP); int tun_fd = open("/dev/net/tun", O_RDWR); struct ifreq req; memset(&req, 0, sizeof(struct ifreq)); strcpy((char*)&req.ifr_name, "gre0"); req.ifr_flags = IFF_UP | IFF_MULTICAST; ioctl(tun_fd, TUNSETIFF, &req); ioctl(sock, SIOCSIFFLAGS, "gre0"); write(tun_fd, "hi", 0); return 0; } ========================== Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net/mlx5: Fix wrong indentation in enable SRIOV codeOr Gerlitz1-1/+1
Smatch is screaming: drivers/net/ethernet/mellanox/mlx5/core/sriov.c:112 mlx5_device_enable_sriov() warn: inconsistent indenting fix that. Fixes: 7ecf6d8ff154 ('IB/mlx5: Restore IB guid/policy for virtual functions') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5: Fix static checker warning on steering tracepoints codeMatan Barak1-2/+2
Fix this sparse complaint: drivers/net/ethernet/mellanox/mlx5/core/./diag/fs_tracepoint.h:172:1: warning: odd constant _Bool cast (ffffffffffffffff becomes 1) Fixes: d9fea79171ee ('net/mlx5: Add tracepoints') Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5e: Fix calculated checksum offloads countersGal Pressman4-6/+13
Instead of calculating the offloads counters, count them explicitly. The calculations done for these counters would result in bugs in some cases, for example: When running TCP traffic over a VXLAN tunnel with TSO enabled the following counters would increase: tx_csum_partial: 1,333,284 tx_csum_partial_inner: 29,286 tx4_csum_partial_inner: 384 tx7_csum_partial_inner: 8 tx9_csum_partial_inner: 34 tx10_csum_partial_inner: 26,807 tx11_csum_partial_inner: 287 tx12_csum_partial_inner: 27 tx16_csum_partial_inner: 6 tx25_csum_partial_inner: 1,733 Seems like tx_csum_partial increased out of nowhere. The issue is in the following calculation in mlx5e_update_sw_counters: s->tx_csum_partial = s->tx_packets - tx_offload_none - s->tx_csum_partial_inner; While tx_packets increases by the number of GSO segments for each SKB, tx_csum_partial_inner will only increase by one, resulting in wrong tx_csum_partial counter. Fixes: bfe6d8d1d433 ("net/mlx5e: Reorganize ethtool statistics") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5e: Don't add/remove 802.1ad rules when changing 802.1Q VLAN filterGal Pressman1-2/+2
Toggling of C-tag VLAN filter should not affect the "any S-tag" steering rule. Fixes: 8a271746a264 ("net/mlx5e: Receive s-tagged packets in promiscuous mode") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5e: Print netdev features correctly in error messageGal Pressman1-2/+2
Use the correct formatting for netdev features. Fixes: 0e405443e803 ("net/mlx5e: Improve set features ndo resiliency") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5e: Check encap entry state when offloading tunneled flowsVlad Buslov1-0/+3
Encap entries cached by the driver could be invalidated due to tunnel destination neighbour state changes. When attempting to offload a flow that uses a cached encap entry, we must check the entry validity and defer the offloading if the entry exists but not valid. When EAGAIN is returned, the flow offloading to hardware takes place by the neigh update code when the tunnel destination neighbour becomes connected. Fixes: 232c001398ae ("net/mlx5e: Add support to neighbour update flow") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5e: Disallow TC offloading of unsupported match/action combinationsOr Gerlitz1-0/+70
When offloading header re-write, the HW may need to adjust checksums along the packet. For IP traffic, and a case where we are asked to modify fields in the IP header, current HW supports that only for TCP and UDP. Enforce it, in this case fail the offloading attempt for non TCP/UDP packets. Fixes: d7e75a325cb2 ('net/mlx5e: Add offloading of E-Switch TC pedit (header re-write) actions') Fixes: 2f4fe4cab073 ('net/mlx5e: Add offloading of NIC TC pedit (header re-write) actions') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5e: Fix erroneous freeing of encap header bufferPaul Blakey1-8/+10
In case the neighbour for the tunnel destination isn't valid, we send a neighbour update request but we free the encap header buffer. This is wrong, because we still need it for allocating a HW encap entry once the neighbour is available. Fix that by skipping freeing it if we wait for neighbour. Fixes: 232c001398ae ('net/mlx5e: Add support to neighbour update flow') Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5: Check device capability for maximum flow countersRaed Salem2-0/+19
Added check for the maximal number of flow counters attached to rule (FTE). Fixes: bd5251dbf156b ('net/mlx5_core: Introduce flow steering destination of type counter') Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5: Fix FPGA capability locationInbar Karmy3-5/+4
Currently, FPGA capability is located in (mdev)->caps.hca_cur, change the location to be (mdev)->caps.fpga, since hca_cur is reserved for HCA device capabilities. Fixes: e29341fb3a5b ("net/mlx5: FPGA, Add basic support for Innova") Signed-off-by: Inbar Karmy <inbark@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5e: IPoIB, Fix access to invalid memory addressRoi Dayan1-1/+2
When cleaning rdma netdevice we need to save the mdev pointer because priv is released when we release netdev. This bug was found using the kernel address sanitizer (KASAN). use-after-free in mlx5_rdma_netdev_free+0xe3/0x100 [mlx5_core] Fixes: 48935bbb7ae8 ("net/mlx5e: IPoIB, Add netdevice profile skeleton") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-26Merge tag 'wireless-drivers-for-davem-2017-09-25' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-driversDavid S. Miller17-46/+125
Kalle Valo says: ==================== wireless-drivers fixes for 4.14 Quite a lot of fixes this time. Most notable is the brcmfmac fix for a CVE issue. iwlwifi * a couple of bugzilla bugs related to multicast handling * two fixes for WoWLAN bugs that were causing queue hangs and re-initialization problems * two fixes for potential uninitialized variable use reported by Dan Carpenter in relation to a recently introduced patch * a fix for buffer reordering in the newly supported 9000 device family * fix a race when starting aggregation * small fix for a recent patch to wake mac80211 queues * send non-bufferable management frames in the generic queue so they are not sent on queues that are under power-save ath10k * fix a PCI PM related gcc warning brcmfmac * CVE-2017-0786: add length check scan results from firmware * respect passive scan requests from user space qtnfmac * fix race in tx path when using multiple interfaces * cancel ongoing scan when removing the wireless interface ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26atlantic: fix iommu errorsPavel Belous3-27/+49
Call skb_frag_dma_map multiple times if tx length is greater than device max and avoid processing tx ring until entire packet has been sent. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26aquantia: Fix transient invalid link down/up indicationsIgor Russkikh1-2/+1
Due to a bug in aquantia atlantic card firmware, it sometimes reports invalid link speed bits. That caused driver to report link down events, although link itself is totally fine. This patch ignores such out of blue readings. Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26aquantia: Fix Tx queue hangupsIgor Russkikh6-59/+76
Driver did a poor job in managing its Tx queues: Sometimes it could stop tx queues due to link down condition in aq_nic_xmit - but never waked up them. That led to Tx path total suspend. This patch fixes this and improves generic queue management: - introduces queue restart counter - uses generic netif_ interface to disable and enable tx path - refactors link up/down condition and introduces dmesg log event when link changes. - introduces new constant for minimum descriptors count required for queue wakeup Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26aquantia: Setup max_mtu in ndev to enable jumbo framesIgor Russkikh2-10/+3
Although hardware is capable for almost 16K MTU, without max_mtu field correctly set it only allows standard MTU to be used. This patch enables max MTU, calculating it from hardware maximum frame size of 16352 octets (including FCS). Fixes: 5513e16421cb ("net: ethernet: aquantia: Fixes for aq_ndev_change_mtu") Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26net/mlx5: Add FGs and FTEs memory poolMaor Gottlieb2-16/+53
Add memory pool allocation for flow groups and flow table entry. It is useful because these objects are not small and could be allocated/deallocated many times. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-26net/mlx5: Allocate FTE object without lockMaor Gottlieb1-46/+46
Allocation of new FTE is a massive operation, part of it could be done without taking the flow group write lock. Split the FTE allocation to two functions of actions which need to be under lock and action which don't have. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-26net/mlx5: Support multiple updates of steering rules in parallelMaor Gottlieb2-126/+264
Most of the time spent on adding new flow steering rule is executing the firmware command. The most common action is adding a new flow steering entry. In order to enhance the update rate we parallelize the commands by doing the following: 1) Replace the mutex lock with readers-writers semaphore and take the write lock only when necessary (e.g. allocating a new flow table entry index or adding a node to the parent's children list). When we try to find a suitable child in the parent's children list (e.g. search for flow group with the same match_criteria of the rule) then we only take the read lock. 2) Add versioning mechanism - each steering entity (FT, FG, FTE, DST) will have an incremental version. The version is increased when the entity is changed (e.g. when a new FTE was added to FG - the FG's version is increased). Versioning is used in order to determine if the last traverse of an entity's children is valid or a rescan under write lock is required. This support improves the insertion rate of steering rules from ~5k/sec to ~40k/sec. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.